Sensitive detection of C-reactive protein using optical fiber Bragg gratings

An accurate and highly sensitive sensor platform has been demonstrated for the detection of C-reactive protein (CRP) using optical fiber Bragg gratings (FBGs). The CRP detection has been carried out by monitoring the shift in Bragg wavelength (Delta lambda(B)) of an etched FBG (eFBG) coated with an anti-CRP antibody (aCRP)-graphene oxide (GO) complex. The complex is characterized by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and atomic force microscopy. A limit of detection of 0.01 mg/L has been achieved with a linear range of detection from 0.01 mg/L to 100 mg/L which includes clinical range of CRP. The eFBG sensor coated with only aCRP (without GO) show much less sensitivity than that of aCRP-GO complex coated eFBG. The eFBG sensors show high specificity to CRP even in the presence of other interfering factors such as urea, creatinine and glucose. The affinity constant of similar to 1.1 x 10(10) M-1 has been extracted from the data of normalized shift (Delta lambda(B)/lambda(B)) as a function of CRP concentration. (C) 2014 Elsevier B.V. All rights reserved.

Luminescence enhancement in monoclinic CaAl2O4:Eu2+, Cr3+ nanophosphor by fuel-blend combustion synthesis

Eu2+ ion doped into a suitable host results in an efficient luminophore with engineering relevance; however stabilizing this ion in a host is known to be a challenge. Here we report a novel approach for the synthesis of efficient CaAl2O4 phosphor containing Eu2+ luminophore and Cr3+ activator. CaAl2O4:Eu2+, Cr3+ is prepared by a solution combustion (SCS) method using (i) urea, (ii) oxalyl dihydrazide (ODH) and (iii) fuel-blend (in which overall fuel to oxidizer ratio (F/O) = 1). A Multi-channel thermocouple setup is used to measure the flame temperatures to study the nature of combustion of various fuel mixtures. The variation of adiabatic flame temperature is calculated theoretically for different urea/ODH mixture ratios according to thermodynamic concept and correlated with the observed flame temperatures. Blue emission of the CaAl2O4:Eu2+ phosphor is enhanced similar to 20 times using the fuel-blend approach. Using the observed reaction kinetics, and the known chemistry of smoldering type combustion, a mechanism is proposed for the observed stabilization of Eu2+ ion in the fuel-blend case. This also explains the observed improvement in blue light emission. We show that the right choice of the fuel ratio is essential for enhancing photoluminescence (PL) emission. The PL intensity is highest for ODH lean and urea rich combination (i.e. when the ratio of ODH:urea is 1:5); measured color purity is comparable to commercial blue phosphor, BAM:Eu2+. (C) 2015 Elsevier B.V. All rights reserved.

A comparative study of a direct discretization and an operator-splitting solver for population balance systems

A direct discretization approach and an operator-splitting scheme are applied for the numerical simulation of a population balance system which models the synthesis of urea with a uni-variate population. The problem is formulated in axisymmetric form and the setup is chosen such that a steady state is reached. Both solvers are assessed with respect to the accuracy of the results, where experimental data are used for comparison, and the efficiency of the simulations. Depending on the goal of simulations, to track the evolution of the process accurately or to reach the steady state fast, recommendations for the choice of the solver are given. (C) 2015 Elsevier Ltd. All rights reserved.

Postsynthetic Exterior Decoration of an Organic Cage by Copper(I)-Catalysed A(3)-Coupling and Detection of Nitroaromatics

A new synthetic protocol based on one-pot, copper(I)-catalysed multicomponent reaction of formaldehyde, secondary amine and terminal alkyne has been employed to postsynthetically modify a self-assembled nanoscopic organic cage. By employing this synthetic strategy, three new cages appended with phenyl-, xylyl-and naphthyl-acetylene moieties have been synthesised. The resulting modified cages were characterised by using a range of spectroscopic techniques. The synthesised cages were fluorescent and thus one of them was tested to explore the potential use of such compounds as chemosensors for the detection of nitroaromatics. Experimental findings suggest a high selective quenching of initial fluorescence intensity in the presence of nitroaromatic compounds. Furthermore, it has been observed that among the various nitroaromatics tested, nitrophenolic compounds have better quenching ability.

Pt-Doped and Pt-Supported La1-xSrxCoO3: Comparative Activity of Pt4+ and Pt-0 Toward the CO Poisoning Effect in Formic Acid and Methanol Electro-oxidation

Pt-supported La1-xSrxCoO3 and Pt-doped La1-xSrxCoO3 are synthesized using chemical reduction and solution combustion method, respectively. Chemical reduction is carried out using formaldehyde as a reducing agent giving Pt-supported La1-xSrxCoO3. Solution combustion method is used to prepare Pt-doped La1-xSrxCoO3. Detailed characterization using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Brunauer-Emmett-Teller (BET) surface area measurement, and transmission electron microscopy (TEM) is carried out to distinguish the Pt-supported and Pt-doped compounds in terms of their morphology and Pt oxidations states. TEM results indeed show the differences in their morphology. Further, electrochemical measurements are performed in neutral medium to differentiate their electrochemical activity. Cyclic voltammetry (CV) shows noticeable differences between Pt-supported La1-xSrxCoO3 and Pt-doped La1-xSrxCoO3. Importantly, our results show that Pt4+ in doped compound has poor to zero electrocatalytic activity toward formic acid and methanol electro-oxidation in comparison to Pt-0 in supported compound. This study shows that metallic Pt in zero oxidation state is a superior catalyst to Pt in +4 oxidation state.

Boron and Nitrogen Co-doped Carbon Nanoparticles as Photoluminescent Probes for Selective and Sensitive Detection of Picric Acid

Here, we report the synthesis of boron and nitrogen Co-doped carbon nanoparticles (BN-CNPs) by a hydrothermal method using sucrose, boric acid, and urea as the precursors. The BN-CNPs show excellent photoluminescence with a quantum yield of similar to 14.2% in aqueous solution and can be used as photoluminescent probes for selective and sensitive detection of picric acid (PA). PA quenches the photoluminescence signal remarkably, while other explosives cause a little quenching confirming the high selectivity of BN-CNPs. The sensitivity toward PA sensing is high at pH 7 and increases with temperature. The detection limit as well as the sensitivity are shown to improve by adding NaCl to the PA. The low detection limit can be as low as 10 nM at room temperature and pH 7, which indicates the BN-CNPs are superior as compared to other luminescent probes reported in the literature.

Algorithm for Autonomous Reorganization of Mobile Wireless Camera Sensor Networks to Improve Coverage

In this paper, sensing coverage by wireless camera-embedded sensor networks (WCSNs), a class of directional sensors is studied. The proposed work facilitates the autonomous tuning of orientation parameters and displacement of camera-sensor nodes in the bounded field of interest (FoI), where the network coverage in terms of every point in the FoI is important. The proposed work is first of its kind to study the problem of maximizing coverage of randomly deployed mobile WCSNs which exploits their mobility. We propose an algorithm uncovered region exploration algorithm (UREA-CS) that can be executed in centralized and distributed modes. Further, the work is extended for two special scenarios: 1) to suit autonomous combing operations after initial random WCSN deployments and 2) to improve the network coverage with occlusions in the FoI. The extensive simulation results show that the performance of UREA-CS is consistent, robust, and versatile to achieve maximum coverage, both in centralized and distributed modes. The centralized and distributed modes are further analyzed with respect to the computational and communicational overheads.

Design of symmetric TIM barrel proteins from first principles

Background: Computational protein design is a rapidly maturing field within structural biology, with the goal of designing proteins with custom structures and functions. Such proteins could find widespread medical and industrial applications. Here, we have adapted algorithms from the Rosetta software suite to design much larger proteins, based on ideal geometric and topological criteria. Furthermore, we have developed techniques to incorporate symmetry into designed structures. For our first design attempt, we targeted the (alpha/beta)(8) TIM barrel scaffold. We gained novel insights into TIM barrel folding mechanisms from studying natural TIM barrel structures, and from analyzing previous TIM barrel design attempts. Methods: Computational protein design and analysis was performed using the Rosetta software suite and custom scripts. Genes encoding all designed proteins were synthesized and cloned on the pET20-b vector. Standard circular dichroism and gel chromatographic experiments were performed to determine protein biophysical characteristics. 1D NMR and 2D HSQC experiments were performed to determine protein structural characteristics. Results: Extensive protein design simulations coupled with ab initio modeling yielded several all-atom models of ideal, 4-fold symmetric TIM barrels. Four such models were experimentally characterized. The best designed structure (Symmetrin-1) contained a polar, histidine-rich pore, forming an extensive hydrogen bonding network. Symmetrin-1 was easily expressed and readily soluble. It showed circular dichroism spectra characteristic of well-folded alpha/beta proteins. Temperature melting experiments revealed cooperative and reversible unfolding, with a T-m of 44 degrees C and a Gibbs free energy of unfolding (Delta G degrees) of 8.0 kJ/mol. Urea denaturing experiments confirmed these observations, revealing a C-m of 1.6 M and a Delta G degrees of 8.3 kJ/mol. Symmetrin-1 adopted a monomeric conformation, with an apparent molecular weight of 32.12 kDa, and displayed well resolved 1D-NMR spectra. However, the HSQC spectrum revealed somewhat molten characteristics. Conclusions: Despite the detection of molten characteristics, the creation of a soluble, cooperatively folding protein represents an advancement over previous attempts at TIM barrel design. Strategies to further improve Symmetrin-1 are elaborated. Our techniques may be used to create other large, internally symmetric proteins.

One pot auto-ignition based synthesis of novel Sr2CeO4: Ho3+ nanophosphor for photoluminescent applications

Ho3+ (0.25-7 mol%) doped Sr2CeO4 nanophosphors were synthesized by solution combustion method using urea as fuel. The structural properties of the nanophosphors were investigated by powder X-ray diffraction studies (PXRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. UV-Visible and photoluminescence (PL) spectroscopic techniques were used for analysing the optical properties of the nanoparticles. PXRD and TEM results revealed the formation of Sr2CeO4: Ho3+ nanocrystalline particles with orthorhombic crystal structure. From the UV-Vis studies the optical band gap energy found to decrease from 5.9 to 5.74 eV with increase in dopant concentration. The PL spectra exhibit the broad excitation band from 200 to 400 nm which concurs well with the commercial near UV LED. The PL spectra vary with the dopant content due to energy transfer from the host to the activator. In this present work we demonstrate that color tuning of phosphor can be achieved by merely varying the Ho3+ ions concentration. The CIE and CCT chromaticity coordinates suggests Sr2CeO4: Ho3+ nanophosphors may be potentially applicable as promising single - phased phosphors for lighting applications. (C) 2015 Elsevier B.V. All rights reserved.

Detailed mechanism and kinetic study of CO oxidation on cobalt oxide surfaces

Co3O4 catalysts were prepared by combustion synthesis using different fuels glycine (G), ODH (O) and urea (U). Morphological changes of the materials were observed by using different fuels. The prepared catalysts were characterized by XRD, XPS, SEM, TEM, BET and DRIFTS analysis. All compounds showed 100% conversion of CO below 175C. The prepared catalysts exhibited very high stability and conversions did not decrease even after 50 h of continuous operation. The oxygen storage capacity (OSC) of materials was measured by H-2-TPR analysis. Co3O4-O is having high OSC among the synthesized catalysts. The activation energies of these catalysts were found to be in the range of 42.3-64.8 kJ mol(-1). With DRIFTS analysis, the surface carbonates, superoxide anions, adsorbed CO, O-2 species on the catalyst surface were found and this information was used to develop a detailed reaction pathway. A kinetic model was developed with the help of proposed mechanism and used to fit the data. (C) 2014 Elsevier B.V. All rights reserved.

A unique uracil-DNA binding protein of the uracil DNA glycosylase superfamily

Uracil DNA glycosylases (UDGs) are an important group of DNA repair enzymes, which pioneer the base excision repair pathway by recognizing and excising uracil from DNA. Based on two short conserved sequences (motifs A and B), UDGs have been classified into six families. Here we report a novel UDG, UdgX, from Mycobacterium smegmatis and other organisms. UdgX specifically recognizes uracil in DNA, forms a tight complex stable to sodium dodecyl sulphate, 2-mercaptoethanol, urea and heat treatment, and shows no detectable uracil excision. UdgX shares highest homology to family 4 UDGs possessing Fe-S cluster. UdgX possesses a conserved sequence, KRRIH, which forms a flexible loop playing an important role in its activity. Mutations of H in the KRRIH sequence to S, G, A or Q lead to gain of uracil excision activity in MsmUdgX, establishing it as a novel member of the UDG superfamily. Our observations suggest that UdgX marks the uracil-DNA for its repair by a RecA dependent process. Finally, we observed that the tight binding activity of UdgX is useful in detecting uracils in the genomes.

Combined Effect of Cryogel Matrix and Temperature-Reversible Soluble-Insoluble Polymer for the Development of in Vitro Human Liver Tissue

Hepatic cell culture on a three-dimensional (3D) matrix or as a hepatosphere appears to be a promising in vitro biomimetic system for liver tissue engineering applications. In this study, we have combined the concept of a 3D scaffold and a spheroid culture to develop an in vitro model to engineer liver tissue for drug screening. We have evaluated the potential of poly(ethylene glycol)-alginate-gelatin (PAG) cryogel matrix for in vitro culture of human liver cell lines. The synthesized cryogel matrix has a flow rate of 7 mL/min and water uptake capacity of 94% that enables easy nutrient transportation in the in vitro cell culture. Youngs modulus of 2.4 kPa and viscoelastic property determine the soft and elastic nature of synthesized cryogel. Biocompatibility of PAG cryogel was evaluated through MTT assay of HepG2 and Huh-7 cells on matrices. The proliferation and functionality of the liver cells were enhanced by culturing hepatic cells as spheroids (hepatospheres) on the PAG cryogel using temperature-reversible soluble-insoluble polymer, poly(N-isopropylacrylamide) (PNIPAAm). Pore size of the cryogel above 100 mu m modulated spheroid size that can prevent hypoxia condition within the spheroid culture. Both the hepatic cells have shown a significant difference (P < 0.05) in terms of cell number and functionality when cultured with PNIPAAm. After 10 days of culture using 0.05% PNIPAAm, the cell number increased by 11- and 7-fold in case of HepG2 and Huh-7 cells, respectively. Similarly, after 10 days of hepatic spheroids culture on PAG cryogel, the albumin production, urea secretion, and CYP450 activity were significantly higher in case of culture with PNIPAAm. The developed tissue mass on the PAG cryogel in the presence of PNIPAAm possess polarity, which was confirmed using F-actin staining and by presence of intercellular bile canalicular lumen. The developed cryogel matrix supports liver cells proliferation and functionality and therefore can be used for in vitro and in vivo drug testing.

Efecto de la dosis y el momento de aplicación de nitrógeno sobre la producción y calidad de semilla de pasto Gamba (Andropogon gayanus Kunth CIAT 621)

En el centro experimental ele pastos y forrajes "Santa Rosa", de la Comisión Nacional de Ganadería, ubicada al Norte de la comunidad de Sabana Grande, municipio de Managua, se realizó el ensayo acerca de los efectos de diferentes dosis y momentos de aplicación de nitrógeno, sobre la producción y calidad de semillas de A. gavanus Kunth CIAT 621. Se utilizó un diseño experimental de parcelas divididas con bloques completamente al azar con arreglo bifactorial. Se probaron cuatro dosis de fertilizante nitrogenado (urea al 46%): 50, 75, 100 y 125 kg/N/ha/corte, y un testigo (sin fertilizar), además de tres momentos de aplicación del fertilizante (al momento del corte, 15 y 30 días después del corte de uniformidad) Los resultados demostraron que tanto las dosis como los momentos tuvieron efectos estadísticamente significativos (P<0.01), sobre los componentes estructurales del rendimiento: tamaño de inflorescencia y número de tallos reproductivos por hectárea. Otros como: tamaño del raquis, número de raquis y número de ramificaciones, no mostraron diferencia significativa para dosis, ni para momentos de aplicación. Además, las dos is de nitrógeno influyeron más sobre el rendimiento de semilla, que los momentos de aplicación. La prueba de proporciones "Z", fue el estadístico de prueba utilizado, para analizar la calidad de la semilla, por la diferencia de proporciones entre las medias comparadas de los tratamientos. La variable de calidad de semilla pura, reflejó su mayor valor con el momento de aplicación 30 días después del corte de uniformidad (57.18 %), presentando únicamente diferencia significativa (P<0.05), con la aplicación de nitrógeno al momento del corte de uniformidad; respecto a las dosis aplicadas el máximo valor le correspondió a los 100 kg/N/ha/corte con 57.9 %, mostrando diferencia significativa (P<0.05), solamente con la dosis de 125 kg/N/ha/corte. El porcentaje de germinación fue más alto para el tratamiento de aplicación del nitrógeno a los 30 días después del corte de uniformidad con 48.7 %, teniendo únicamente diferencia significativa (P<0.05), con la aplicación al momento del corte de uniformidad; sin embargo, la mayor germinación se registró con la dosis de 100 kg/N/ha/corte (49.5 %). mostrando solamente diferencias significativas (P<0.05), con la dosis de 125 kg/N/ha/corte. El valor cultural, mostró una tendencia igual a las dos variables de calidad anteriores, por factores separados (dosis y momentos). El mayor valor obtenido fue con la dosis ele 100 kg/N/ha/corte(28.67 %), siendo estadísticamente igual (P>0.05), con las dosis de 50, 75 kg/N/ha/corte y el testigo; únicamente resultó diferencias significativas (P<0.05), con la dosis de 125 kg/N/ha/corte. Además, el momento a los 30 días después del corte de uniformidad (27.99 %), fue diferente estadísticamente (P<0.05), a la aplicación de nitrógeno al momento del corte de uniformidad. Este resultado se debió a que el valor cultural es un índice compuesto, producto de ambas variables (%de semilla pura y % de germinación). Por otra parte, el valor cultural mostró que al interactuar ambos factores (momento y dosis), se registró un alto valor de pureza y germinación con respecto al obtenido por efecto de factores separados; el mayor valor obtenido fue con el momento de aplicación a los 30 días después del corte de uniformidad y la dosis de 50 kg/N/ha/corte (34.2 % de semilla pura y germinable).

Efecto de diferentes niveles de aplicación de fertilizante nitrogenado sobre la producción de semilla del Andropogon gayanus kunth var. CIAT 621 (Gamba), en la zona de Carazo

El estudio se desarrollo de junio a diciembre de 1994, en la finca "El Pastor" municipio de Santa Teresa, Departamento de Carazo. Ubicada a una elevación de 367 msnm. y entre las latitudes 1301' y 1302'. La zona registró tamperaturas promedios de 24°C y unos 1550 mm de precipitación media por año; por lo cual es posible considerar la zona agroecológica como trópico seco. Se evaluó el efecto de diferentes niveles de fertilizante nitrogenado sobre la producción de semilla de Andropogon gayanus Kunth, para ello se utilizó un diseño experimental de Bloques Completos al Azar (BCA) y se estudió el efecto de un solo factor (Niveles de fertilizante) con cuatro repeticiones formándose un total de veinte tratamientos 2 El ensayo se realizó en un área total de 875 m en la toma de muestras se empleó el método del metro cuadrado para la evaluación de- MS y forraje verde. En cambio, para evaluar la producción de semilla cruda se evaluó el área útil (3x4 m) de parcela. No se realizó poda de control, a causa del mal invierno. Se procedió a aplicar de una sola vez los diferentes niveles de fertilizante. El estudio estadístico contempló el uso del análisis de la varianza (ANDEVA) y se hizo una separación de medias por la prueba de Duncan. Se midió la influencia porcentual de cinco niveles de fertilizante (0, 25, 50, 75, 100 Kg de Urea, 46% N2/h3.), sobre la producción de semilla cruda de la parcela útil l (SCPU), también el Porcentaje de semilla pura ajustada (PSPA), kilogramos de forraje verde por m 2 (KGFV), porcentaje de materia seca (%MS) y• porcent.aje de viabilidad de la semilla (% VIAB>. Las variables% MS y Semilla cruda evaluadas resultaron con valores significativos para los bloques, a excepción del % SPA, % VIAB y Forraje verde. Para los tratamientos resultó significativ solamente la variable Forraje verde al (P<0.05>. Al evaluar los resultados obtenido sometiendo las variables en estudio al análisis estadístico y considerando el factor costo de producción- rentabilidad y rendimiento productivo en el campo; seleccionamos el tratamiento 50 Kg urea 146%/N,)/ha como el mas idóneo para la producción de semilla del Andropogon gayanus para la zona evaluada.

Estudio de pre-factibilidad de una propuesta de desarrollo ganadero para la finca "El Garabato" en Tola, Rivas

En el presente trabajo se evaluó EX-ante la factibilidad técnica y financiera de una propuesta de desarrollo ganadero para la finca "El Garabato" planteada por los socios de la Cooperativa Ezequiel N24 en el Municipio de Tola, Departamento de Rivas. Para ello se realizó un diagnóstico general de la finca, donde se determinó los recursos disponibles y las características propias del sistema productivo, basados en esto se estimaron los diferentes coeficientes técnicos así como las posibles fuentes de ingresos y egresos, permitiendo realizar las proyecciones del hato así como las proyecciones financieras, Dentro de los aspectos técnicos se determinó la composición de las pasturas donde el 69% de los pastos son naturalizados, el 23% son pastos mejorados y el 8% está conformado por pastos naturales. Los canales de comercialización en la zona del proyecto para la leche están representados por los manteros, el Proyecto Juan Agustín Guillén de la Tienda Campesina y el Centro de Acopio de La Selecta. En el caso de la carne por los intermediarios (matarifes) y productores dedicados a la crianza y engorde de novillos. Al considerar las inversiones en pastura que conlleva la propuesta, la distribución de pastos varia, ocupando los pastos mejorados el 41%, el 3% por pastos naturales y el 56% corresponden a pastos naturalizados. A la par de esto el área ganadera se incrementa en 64 mz. como consecuencia de la reducción del área agricola por la misma cantidad de mz. Las disponibilidades de pastos se ven mejoradas por las inversiones, disminuyendo el déficit de alimento a partir del segundo año. El uso de la Caña de Azúcar más urea, durante el verano permitirá mejorar la oferta de alimento para esta época, resultando menores pérdidas en la producción. Como efecto de la propuesta se producirá un incremento promedio anual de 7.18% del hato total, este incremento se da esperando que los índices de mortalidad de adultos y terneros disminuyan de un 4 al. 2% y de 14 al 7% respectivamente y que la tasa de descarte de vacas se mantenga en 12%1 considerando que la finca mantenga un 67% en tasa de natalidad. Al estructurar los gastos se encontró que en el año base los gastos de mano de obra representan el 71%, la suplementación el 8%, los gastos en manejo fueron de 8%, impuestos 7%, mantenimiento de equipo e infraestructura de 4% y gastos varios de 1%, con el proyecto esta estructura de gastos se ve un poco alterada al disminuir los gastos por mano de obra a un 63% e incrementarse los gastos por suplementacion y gastos varios a 12% y 6% respectivamente, el resto de los gastos presentan leves modificaciones. En los ingresos del año base la producción de leche representa el 46%, la producción de carne el 53% y el 1% corresponde a otros ingresos. Con el proyecto el aporte en los ingresos por producción de leche asciende a 62% y en producción de carne es de 34%, en otros ingresos representa el 4% al finalizar el sexto año. De las inversiones que se realizaran el 60% ésta destinado para pastos y el 40% corresponde a inversiones en infraestructura. El monto total de la inversión asciende a C$96,905.70 de los cuales el 71% será solicitado en préstamo y el restante 29% será asumido por la Cooperativa. Del análisis financiero resultó que la propuesta de los socios con uso de financiamiento para las inversiones a una tasa de interés del 12.5% presenta un VAN de C$41996.65 y una TIR de 15.16%. En cambió la realización de la propuesta con recursos propios presentó resultados superiores al anterior siendo el VAN de C$18,506.01 y una TIR de 18.01%•. Considerando estos resultados la propuesta es rentable, pero debido al déficit de efectivo que se presenta en los primeros años podría alterar la realización de las inversiones, ésta situación puede compensarse haciendo uso de otros recursos de la Cooperativa.