Springback data from stamping and simulating the forming of advanced high strength steel

This dataset is comprised of a spreadsheet of simulation result files, cross-section geometries of stamped parts, strain results of cross-section of stamped parts, simulation data (strain stress displacement energies), and variation data of material properties of a single coil. This data is a collection of both experimental and simulation results from industrial and laboratory stamping of advanced high strength steels (AHSS). The steels that were stamped were a typical high-strength low-alloy (HSLA) steel, a transformation-induced plasticity (TRIP) steel, a super HSLA steel, and a dual phase (DP) steel. The selected part was an automatic Ford Falcon front cross-member component using the Ford Geelong stamping plant. The variation of the material and stamped parts was also collected.

The effect of an ultra-endurance running race on mucosal and humoral immune function

There are reports of the effect of endurance exercise on mucosal immune function and of the effect of short duration exercise on humoral immune function. However, little is known of the effect of endurance exercise on humoral immune function and the related risk of infection. This study examined the effects of an ultra-endurance running race on salivary immunoglobulin-A (s-IgA), serum IgA, leukocyte subset concentrations and the incidence of upper respiratory tract infections (URTI). 

The impact of column connection on band broadening in very high pressure liquid chromatography

A series of experiments was conducted to evaluate the degree of band broadening in very high pressure LC due to column connections. Different column manufacturers use slightly different designs for their column fittings. If the same column connections are repeatedly used to attach columns of different origins, different void volumes form between capillary tubes and column inlets. An Agilent Ultra Low Dispersion Kit (tubing id 75 μm) was installed on an Agilent Infinity 1290 ultra HPLC and used to connect successively an Agilent, a Phenomenex, and a Waters column. A series of uracil (unretained) samples were injected and eluted at a wide range of flow rates with a water/acetonitrile mixture as eluent. In order to determine the variance contribution from column connections as accurately as possible a nonretained probe compound was selected because the variance contribution from the column is the smallest for analytes, which have very low k values. Yet, this effect still has an impact on the resolution for moderately retained compounds (k > 2) for narrow-bore columns packed with fine particles, since variance contributions are additive for linear chromatographic systems. Each injection was replicated five times under the same experimental conditions. Then NanoViper column connections (tubing id 75 μm) were used and the same injections were made. This system was designed to minimize connection void volumes for any column. Band variances were calculated as the second central moment of elution peaks and used to assess the degree of band broadening due to the column connections. Band broadening may increase from 3.8 to 53.9% when conventional metal ferrules were used to join columns to connection sites. The results show that the variance contribution from improper connections can generate as much as 60.5% of the total variance observed. This demonstrates that column connections can play a larger role than the column packing with respect to band dispersion.

The five-parameter grain boundary character and energy distributions of a fully austenitic high-manganese steel using three dimensional data

The three-dimensional interfacial grain boundary network in a fully austenitic high-manganese steel was studied as a function of all five macroscopic crystallographic parameters (i.e. lattice misorientation and grain boundary plane normal) using electron backscattering diffraction mapping in conjunction with focused ion beam serial sectioning. The relative grain boundary area and energy distributions were strongly influenced by both the grain boundary plane orientation and the lattice misorientation. Grain boundaries terminated by (1 1 1) plane orientations revealed relatively higher populations and lower energies compared with other boundaries. The most frequently observed grain boundaries were {1 1 1} symmetric twist boundaries with the Σ3 misorientation, which also had the lowest energy. On average, the relative areas of different grain boundary types were inversely correlated to their energies. A comparison between the current result and previously reported observations (e.g. high-purity Ni) revealed that polycrystals with the same atomic structure (e.g. face-centered cubic) have very similar grain boundary character and energy distributions. © 2014 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

Towards integrated anti-microbial capabilities: Novel bio-fouling resistant membranes by high velocity embedment of silver particles

Biofilm formation on membranes during water desalination operation and pre-treatments limits performance and causes premature membrane degradation. Here, we apply a novel surface modification technique to incorporate anti-microbial metal particles into the outer layer of four types of commercial polymeric membranes by cold spray. The particles are anchored on the membrane surface by partial embedment within the polymer matrix. Although clear differences in particle surface loadings and response to the cold spray were shown by SEM, the hybrid micro-filtration and ultra-filtration membranes were found to exhibit excellent anti-bacterial properties. Poly(sulfone) ultra-filtration membranes were used as for cross-flow filtration of Escherichia coli bacteria solutions to investigate the impact of the cold spray on the material[U+05F3]s integrity. The membranes were characterized by SEM-EDS, FT-IR and TGA and challenged in filtration tests. No bacteria passed through the membrane and filtrate water quality was good, indicating the membranes remained intact. No intact bacteria were found on hybrid membranes, loaded with up to 15. wt% silver, indicating the treatment was lysing bacteria on contact. However, permeation of the hybrid membranes was found to be reduced compared to control non-modified poly(sulfone) membranes due to the presence of the particles across the membrane material. The implementation of cold spray technology for the modification of commercial membrane products could lead to significant operational savings in the field of desalination and water pre-treatments.

Effect of heat treatment on diffusion, internal friction, microstructure and mechanical properties of ultra-fine-grained nickel severely deformed by equal-channel angular pressing

Severe plastic deformation via equal-channel angular pressing was shown to induce characteristic ultra-fast diffusion paths in Ni (Divinski et al., 2011). The effect of heat treatment on these paths, which were found to be represented by deformation-modified general high-angle grain boundaries (GBs), is investigated by accurate radiotracer self-diffusion measurements applying the 63Ni isotope. Redistribution of free volume and segregation of residual impurities caused by the heat treatment triggers relaxation of the diffusion paths. A correlation between the GB diffusion kinetics, internal friction, microstructure evolution and microhardness changes is established and analyzed in detail. A phenomenological model of diffusion enhancement in deformation-modified GBs is proposed.

Self-assembled V2O5 interconnected microspheres produced in a fish-water electrolyte medium as a high-performance lithium-ion-battery cathode

Interconnected microspheres of V2O5 composed of ultra-long nanobelts are synthesized in an environmental friendly way by adopting a conventional anodization process combined with annealing. The synthesis process is simple and low-cost because it does not require any additional chemicals or reagents. Commercial fish-water is used as an electrolyte medium to anodize vanadium foil for the first time. Electron microscopy investigation reveals that each belt consists of numerous nanofibers with free space between them. Therefore, this novel nanostructure demonstrates many outstanding features during electrochemical operation. This structure prevents self-aggregation of active materials and fully utilizes the advantage of active materials by maintaining a large effective contact area between active materials, conductive additives, and electrolyte, which is a key challenge for most nanomaterials. The electrodes exhibit promising electrochemical performance with a stable discharge capacity of 227 mAh·g–1 at 1C after 200 cycles. The rate capability of the electrode is outstanding, and the obtained capacity is as high as 278 at 0.5C, 259 at 1C, 240 at 2C, 206 at 5C, and 166 mAh·g–1 at 10C. Overall, this novel structure could be one of the most favorable nanostructures of vanadium oxide-based cathodes for Li-ion batteries. [Figure not available: see fulltext.]

Avaliação do papel da ultra-sonografia obstétrica de rotina, no rastreamento pré-natal das anormalidades cardíacas

A ultra-sonografia obstétrica é um método diagnóstico tradicionalmente utilizado na rotina do atendimento pré-natal, tendo sido estudados de forma ampla suas vantagens e limitações. O advento do diagnóstico intra-uterino de cardiopatias congênitas e de arritmias através da ecocardiografia fetal modificou completamente o prognóstico perinatal dessas afecções, por permitir planejar o adequado manejo cardiológico no período neonatal imediato e, em algumas situações, o tratamento e sua resolução in utero. Sendo muito elevada a prevalência de cardiopatias congênitas durante a vida fetal, sua detecção torna-se fundamental. Considerando a inviabilidade operacional de realizar rotineiramente ecocardiografia fetal em todas as gestações, levando-se em conta as condições locais do sistema de saúde, o encaminhamento para exame por especialista passa a ser otimizado com a possibilidade da suspeita de alterações estruturais ou funcionais do coração e do sistema circulatório durante o exame ultra-sonográfico obstétrico de rotina. Não são conhecidos, em nosso meio, dados que avaliem de forma sistemática a acurácia da ultra-sonografia obstétrica no que se refere à suspeita pré-natal de cardiopatias. A partir deste questionamento, este trabalho foi delineado com o objetivo de avaliar o papel da ultra-sonografia obstétrica de rotina na suspeita pré-natal de cardiopatias congênitas ou arritmias graves e os fatores envolvidos na sua efetividade. A amostra foi constituída de 77 neonatos ou lactentes internados no Instituto de Cardiologia do Rio Grande do Sul / Fundação Universitária de Cardiologia (IC/FUC) no período de maio a outubro de 2000, com diagnóstico pós-natal confirmado de cardiopatia estrutural ou arritmia grave, que tenham sido submetidos, durante a vida fetal, a pelo menos uma ultra-sonografia obstétrica após a 18a semana de gestação. Para a coleta de dados, foi utilizado um questionário padronizado, respondido pelos pais ou responsáveis, após consentimento informado. As variáveis categóricas foram comparadas pelo teste do qui-quadrado ou pelo teste de Fisher, com um alfa crítico de 0,05. Um modelo de regressão logística foi utilizado para determinar variáveis independentes eventualmente envolvidas na suspeita pré-natal de cardiopatia. Em 19 pacientes (24,7%), a ultra-sonografia obstétrica foi capaz de levantar suspeita de anormalidades estruturais ou de arritmias. Ao serem consideradas apenas as cardiopatias congênitas, esta prevalência foi de 19,2% (14/73). Em 73,7% destes, as cardiopatias suspeitadas eram acessíveis ao corte de 4-câmaras isolado. Observou-se que 26,3% das crianças com suspeita pré-natal de cardiopatia apresentaram arritmias durante o estudo ecográfico, enquanto apenas 3,4% dos pacientes sem suspeita pré-natal apresentaram alterações do ritmo (P=0,009). Constituiram-se em fatores comparativos significantes entre o grupo com suspeita pré-natal e o sem suspeita a paridade (P=0,029), o parto cesáreo (P=0,006), a internação em unidade de tratamento intensivo (P=0,046) e a escolaridade paterna (P=0,014). Não se mostraram significativos o número de gestações, a história de abortos prévios, o estado civil, o sexo dos pacientes, o tipo de serviço e a localidade em que foram realizados o pré-natal e a ultra-sonografia obstétrica, a indicação da ecografia, o número de ultra-sonografias realizadas, a renda familiar e a escolaridade materna. À análise multivariada, apenas a presença de alteração do ritmo cardíaco durante a ultra-sonografia obstétrica mostrou-se como variável independente associada à suspeita pré-natal de anormalidade cardíaca. Este trabalho demonstra que a ultra-sonografia obstétrica de rotina ainda tem sido subutilizada no rastreamento pré-natal de cardiopatias congênitas, levantando a suspeita de anormalidades estruturais em apenas um quinto dos casos. Considerando a importância prognóstica do diagnóstico intra-uterino de cardiopatias congênitas e arritmias graves, todos os esforços devem ser mobilizados no sentido de aumentar a eficácia da ecografia obstétrica de rotina para a suspeita de anormalidades cardíacas fetais. O treinamento dirigido dos ultra-sonografistas e a conscientização do meio obstétrico e da própria população são instrumentos para esta ação.

New method for determination of (E)resveratrol in wine based on microextraction using packed sorbent and ultra-performance liquid chromatography

An ultra-fast and improved analytical methodology based on microextraction by packed sorbent (MEPS) combined with ultra-performance LC (UPLC) was developed and validated for determination of (E)-resveratrol in wines. Important factors affecting the performance of MEPS such as the type of sorbent material (C2, C8, C18, SIL, and M1), number of extraction cycles, and sample volume were studied. The optimal conditions of MEPS extraction were obtained using C8 sorbent and small sample volumes (50–250mL) in one extraction cycle (extract–discard) and in a short time period (about 3 min for the entire sample preparation step). (E)-Resveratrol was eluted by 1 250mL of the mixture containing 95% methanol and 5% water, and the separation was carried out on a highstrength silica HSS T3 analytical column (100 mm 2.1 mm, 1.8mm particle size) using a binary mobile phase composed of aqueous 0.1% formic acid (eluent A) and methanol (eluent B) in the gradient elution mode (10 min of total analysis). The method was fully validated in terms of linearity, detection (LOD) and quantification (LOQ) limits, extraction yield, accuracy, and inter/intra-day precision, using a Madeira wine sample (ET) spiked with (E)-resveratrol at concentration levels ranging from 5 to 60mg/mL. Validation experiments revealed very good recovery rate of 9575.8% RSD, good linearity with r2 values 40.999 within the established concentration range, excellent repeatability (0.52%), and reproducibility (1.67%) values (expressed as RSD), thus demonstrating the robustness and accuracy of the MEPSC8/UPLC-photodiode array (PDA) method. The LOD of the method was 0.21mg/mL, whereas the LOQ was 0.68mg/mL. The validated methodology was applied to 30 commercial wines (24 red wines and six white wines) from different grape varieties, vintages, and regions. On the basis of the analytical validation, the MEPSC8/UPLC-PDA methodology shows to be an improved, sensitive, and ultra-fast approach for determination of (E)-resveratrol in wines with high resolving power within 6 min.

NH3+N2O3 reaction. High level calculations

We have undertaken a comprehensive study of the NH3 + N2O3 reaction in gas phase. Total energies of reactants, intermediates, transition states, and products have been calculated at CBS-QB3 level of theory. The corresponding BSSE analysis were performed at the highest level of theory, i.e. MP2 using the complete basis set (CBS) extrapolation at CBS-QB3 optimized geometries. A detailed mechanism was proposed for 2NH(3) - N2O3 -> 2N(2) - 3H(2)O with Delta H-r= - 170.08 kcal/mol N-2. (c) 2005 Elsevier B.V. All rights reserved.

Avaliação dos níveis de proteína C-reativa ultra-sensível em pacientes com periodontite crônica severa generalizada e sem periodontite

INTRODUCTION: The high sensitivity C-reactive protein (hsCRP) constitutes an inflammatory mediator used as predictor of cardiovascular risk that comes being researched as indicative relation factor between cardiovascular and periodontal diseases. PROPOSITION: To compare serumals levels of C-reactive protein between patients with and without generalized severe chronic periodontitis. METHODOLOGY: A seccional study was realized using a sample with 62 patients, being 31 participants carriers of periodontal diseases (Group I) and 31 without periodontal diseases (Group II), grouped to the pairs by age and sex. As inclusion criterio were selected patients with diagnosis of generalized severe chronic periodontitis, being preculeds, individuals which presented systemic disease, recent infection history, historical of CVA or stroke, smokers, pregnants and lactants. The research consisted of two stages, a clinc and other biochemist. The clinical stage is constituted of periodontal examination and the biochemist stage, of the peripheral blood collection for determination hsCRP levels and a hemogram to inquire any panel which could suggest infectious and/or inflammatory process. RESULTS: Periodontal disease group presented a average of 0,36mg/dL, while the group without disease presented 0,17 mg/dL, do not existing significant difference statistically between the averages (p = 0,061). The cardiovascular risk for the group I was classified high for 27,6% of participants and low for 72,4% of them. In the group II, 6,45% presented high risk e 93,5% low risk, being this significant relation statistically gotten for Fisher s Test (p = 0,042) presenting OR = 5,33; IC = 95% (1,02 27,4). The independets variables reseacred do not presented significant association statistically with the levels of hsCRP. CONCLUSION: The study indicated that despite of carriers patients of periodontal diseases do not present differents serumals levels of hsCRP from the other group, the periodontal disease was considered as risk factor for hsCRP plasmatic levels elevation

Microstructural Evolution of Ti-6Al-7Nb Alloy During High Pressure Torsion

Ti-6Al-7Nb alloys are being evaluated for biomedical applications, in substitution of the more conventional Ti-6Al-7V. Both types of alloys present a microstructure containing the alpha and the beta phases, which result in good compromise for mechanical applications. In the present work Ti-6Al-7Nb alloys were processed by High Pressure Torsion (HPT), varying the number of revolutions and thus the total imposed strain. X-Ray Diffraction (XRD) results revealed the formation of different crystallographic textures in samples subjected to HPT. Microhardness distribution, across the diameters of the disks, is rather homogeneous for all samples, with higher values for those subjected to 03 and 05 turns. Transmission electron microscopy (TEM) micrographs have showed that an ultra-fine grained microstructure was obtained in all the samples.

Cistos subependimários diagnosticados pelo ultra-som transfontanelar

Objetivos: avaliar a evolução ultra-sonográfica de cistos subependimários (CSE) do ângulo externo dos ventrículos laterais, e a evolução clínica dos pacientes. Comparar os pacientes com CSE isolados e os com CSE associados a outras lesões. Métodos: foram diagnosticados um a vários cistos no ângulo externo de um ou de ambos os ventrículos laterais, por meio de ultra-som transfontanelar (US) de rotina, realizado nos primeiros dias de vida, caracterizando os CSE. Durante o período de 1981-2000, 66 recém-nascidos tiveram CSE evidenciados na UTI neonatal do Hospital de Port-Royal. Foram constituídos dois grupos: G-I, com CSE isolados (n=21), e G-II, com CSE associados a outras lesões (n=45). Resultados: os recém-nascidos do GI apresentaram maior maturidade, melhores condições de nascimento e menor morbidade respiratória em relação a GII. A incidência de malformações congênitas foi elevada em ambos os grupos. Houve baixa taxa de infecção bacteriana e ausência de infecção congênita. Os CSE foram uni ou bilaterais, únicos ou múltiplos (colar de pérolas), sem diferença entre os grupos estudados, e predominaram à esquerda. US seriados foram realizados em 49/66 pacientes (74%), mostrando aumento no tamanho do cisto em 21/49 (45%), no primeiro mês de vida, enquanto 12 CSE (24%) desapareceram. O óbito ocorreu em dez recém-nascidos com lesões neurológica graves (quatro leucomalácias periventriculares, cinco hemorragias peri e intraventriculares), e somente um com hérnia diafragmática não apresentava outras lesões ao US transfontanelar. Conclusões: as características dos CSE não diferiram quando esses estavam associados a outras lesões. O nítido predomínio no lado esquerdo sugere uma etiologia vascular. Foi encontrada uma alta taxa de malformações associadas, alertando para a possibilidade de uma etiologia malformativa. Ambas hipóteses sugerem um desvio de desenvolvimento, e não de uma fetopatia viral.

Características ultra-estruturais e diferenciativas das espermátides de piracanjuba (Brycon orbignyanus) durante a espermiogênese

A espermiogênese que ocorre em piracanjuba Brycon orbignyanus pode ser dividida em quatro etapas morfológicas, cujas características principais consistem em reduções dos volumes citoplasmático, nuclear e celular, e compactação da cromatina nuclear das espermátides, sendo que as etapas espermiogenéticas ocorrem simultaneamente. Ao final da espermiogênese, quando as espermátides atingem nível elevado de diferenciação, os núcleos se tornam mais compactos e os citoplasmas se tornam reduzidos. Estas modificações resultam na formação de células altamente diferenciadas, os espermatozóides com cabeça, peça intermediária e flagelo bem definidos. As espermátides e os espermatozóides foram observados em cistos germinativos, mas também podem ser encontrados na luz dos túbulos seminíferos.

Avaliação qualitativa do efeito de agentes de limpeza na camada de lama dentinária: estudo ultra-estrutural em microscopia eletrônica de varredura

Quando qualquer instrumento abrasiona ou corta a dentina, produz na superfície uma camada de lama dentinária ou smear layer. Dependendo do agente de união indicado em Odontologia adesiva, há a necessidade ou não da remoção da camada de lama da superfície dentinária. Com a finalidade de verificar a ação de diferentes substâncias para a limpeza dentinária, utilizamos 20 dentes pré-molares superiores íntegros, mantidos em soro fisiológico, nos quais as coroas foram seccionadas ao meio no sentido mésio-distal. Com instrumento diamantado, removeu-se o esmalte da porção vestibular e da porção lingual da coroa e, com uma broca carbide cilíndrica lisa nº 56, cortou-se aproximadamente 1 mm de dentina com alta rotação sob abundante refrigeração ar/água, para produzir a camada de lama dentinária. em seguida, essa superfície foi tratada com diferentes substâncias e lavada por 30 segundos com spray ar/água. No controle, foi simplesmente utilizado o spray ar/água. Os espécimes foram montados em suportes metálicos, preparados e visualizados no MEV-DSM 950 da Zeiss, em aumentos que variaram de 100 a 5.000 vezes. Os materiais que mais removeram a camada de lama foram, em ordem crescente: 1. spray ar/água; 2. fluoreto de sódio 2%; 3. associação alternada de Dakin/Tergensol; 4. água oxigenada 3%; 5. jateamento com óxido de alumínio 50 mm; 6. flúor acidulado 1,27%; 7. ácido poliacrílico 25%; 8. ácido fosfórico 10%.