Strong Down-Valley Low-Level Jets over the Atacama Desert: Observational Characterization

The near-surface wind and temperature regime at three points in the Atacama Desert of northern Chile is described using two-year multi-level measurements from 80-m towers located in an altitude range between 2100 and 2700 m ASL. The data reveal the frequent development of strong nocturnal drainage flows at all sites. Down-valley nose-shaped wind speed profiles are observed with maximum values occurring at heights between 20 m and 60 m AGL. The flow intensity shows considerable inter-daily variability and a seasonal modulation of maximum speeds, which in the cold season can attain hourly average values larger than 20 m s−1. Turbulent mixing appears significant over the full tower layer, affecting the curvature of the nighttime temperature profile and possibly explaining the observed increase of surface temperatures in the down-valley direction. Nocturnal valley winds and temperatures are weakly controlled by upper-air conditions observed at the nearest aerological station. Estimates of terms in the momentum budget for the development and the quasi-stationary phases of the down-valley flows suggest that the pressure gradient force due to the near-surface cooling along the sloping valley axes plays an important role in these drainage flows. A scale for the jet nose height of equilibrium turbulent down-slope jets is proposed, based on surface friction velocity and surface inversion intensity. At one of the sites this scale explains about 70% of the case-to-case observed variance of jet nose heights. Further modeling and observational work is needed, however, in order to better define the dynamics, extent and turbulence structure of this flow system, which has significant wind-energy, climatic and environmental implications.

Environmental justice and health practices: understanding how health inequities arise at the local level

While empirical evidence continues to show that people living in low socio-economic status neighbourhoods are less likely to engage in health-enhancing behaviour, our understanding of why this is so remains less than clear. We suggest that two changes could take place to move from description to understanding in this field; (i) a move away from the established concept of individual health behaviour to a contextualised understanding of health practices; and (ii) a switch from focusing on health inequalities in outcomes to health inequities in conditions. We apply Pierre Bourdieu's theory on capital interaction but find it insufficient with regard to the role of agency for structural change. We therefore introduce Amartya Sen's capability approach as a useful link between capital interaction theory and action to reduce social inequities in health-related practices. Sen's capability theory also elucidates the importance of discussing unequal chances in terms of inequity, rather than inequality, in order to underscore the moral nature of inequalities. We draw on the discussion in social geography on environmental injustice, which also underscores the moral nature of the spatial distribution of opportunities. The article ends by applying this approach to the 'Interdisciplinary study of inequalities in smoking' framework.

Effect of Feeding Procedure and Intake Level on Steer Feedlot Performance and Carcass Composition: A Progress Report

Two feedlot trials were conducted to evaluate the effects of feeding frequency (once daily in the morning, once daily in the afternoon or twice daily) and feeding level (ad libitum, 95% of ad libitum, or 90% of ad libitum) on the feedlot performance and carcass composition of beef steers. Data were collected using 196 yearling beef steers. In both trials cattle fed once daily in the morning tended to have higher gains and better feed efficiencies than cattle fed once daily in the afternoon or cattle fed twice daily. Overall, cattle restricted to 95% and 90% of ad libitum intake levels had better feed efficiencies than cattle with ad libitum access to feed. Cattle fed once daily in the morning tended to have less backfat than cattle fed once daily in the afternoon or cattle fed twice daily.

Influence of platform switching on bone-level alterations: a three-year randomized clinical trial

The concept of platform switching has been introduced to implant dentistry based on clinical observations of reduced peri-implant crestal bone loss. However, published data are controversial, and most studies are limited to 12 months. The aim of the present randomized clinical trial was to test the hypothesis that platform switching has a positive impact on crestal bone-level changes after 3 years. Two implants with a diameter of 4 mm were inserted crestally in the posterior mandible of 25 patients. The intraindividual allocation of platform switching (3.3-mm platform) and the standard implant (4-mm platform) was randomized. After 3 months of submerged healing, single-tooth crowns were cemented. Patients were followed up at short intervals for monitoring of healing and oral hygiene. Statistical analysis for the influence of time and platform type on bone levels employed the Brunner-Langer model. At 3 years, the mean radiographic peri-implant bone loss was 0.69 ± 0.43 mm (platform switching) and 0.74 ± 0.57 mm (standard platform). The mean intraindividual difference was 0.05 ± 0.58 mm (95% confidence interval: -0.19, 0.29). Crestal bone-level alteration depended on time (p < .001) but not on platform type (p = .363). The present randomized clinical trial could not confirm the hypothesis of a reduced peri-implant crestal bone loss, when implants had been restored according to the concept of platform switching.

Two-dimensional supramolecular polymers: controlled formation and visualization on the surface

Self – assembly is a powerful tool for the construction of highly organized nanostructures. Therefore, the possibility to control and predict pathways of molecular ordering on the nanoscale level is a critical issue for the production of materials with tunable and adaptive macroscopic properties. 2D polymers are attractive objects for the field of material sciences due to their exceptional properties. [1] As shown before, amphiphilic oligopyrenotides (produced via automated solid-phase synthesis) form rod–like supramolecular polymers in water. [2] These assemblies form 1D objects. [3] By applying certain changes to the design of the oligopyrenotide units the dimensionality of the formed assemblies can be influenced. Herein, we demonstrate that Py3 (see Figure 1) forms defined supramolecular assemblies under thermodynamic conditions in water. To study Py3 self-assembly, we carried out whole set of spectroscopic (UV/vis, fluorescence, DLS) and microscopic experiments (AFM). The obtained results suggest that oligopyrenotides with the present type of geometry and linker length leads to formation of 2D supramolecular assemblies.

Tree-level contribution to B[over ¯]→X_{d}γ using fragmentation functions

We evaluate the most important tree-level contributions connected with the b→uu ¯ ¯ dγ transition to the inclusive radiative decay B ¯ ¯ ¯ →X d γ using fragmentation functions. In this framework the singularities arising from collinear photon emission from the light quarks (u , u ¯ ¯ , and d ) can be absorbed into the (bare) quark-to-photon fragmentation function. We use as input the fragmentation function extracted by the ALEPH group from the two-jet cross section measured at the large electron positron (LEP) collider, where one of the jets is required to contain a photon. To get the quark-to-photon fragmentation function at the fragmentation scale μ F ∼m b , we use the evolution equation, which we solve numerically. We then calculate the (integrated) photon energy spectrum for b→uu ¯ ¯ dγ related to the operators P u 1,2 . For comparison, we also give the corresponding results when using nonzero (constituent) masses for the light quarks.

Flavor-phenomenology of two-Higgs-doublet models with generic Yukawa structure

In this article, we perform an extensive study of flavor observables in a two-Higgs-doublet model with generic Yukawa structure (of type III). This model is interesting not only because it is the decoupling limit of the minimal supersymmetric standard model but also because of its rich flavor phenomenology which also allows for sizable effects not only in flavor-changing neutral-current (FCNC) processes but also in tauonic B decays. We examine the possible effects in flavor physics and constrain the model both from tree-level processes and from loop observables. The free parameters of the model are the heavy Higgs mass, tanβ (the ratio of vacuum expectation values) and the “nonholomorphic” Yukawa couplings ϵfij(f=u,d,ℓ). In our analysis we constrain the elements ϵfij in various ways: In a first step we give order of magnitude constraints on ϵfij from ’t Hooft’s naturalness criterion, finding that all ϵfij must be rather small unless the third generation is involved. In a second step, we constrain the Yukawa structure of the type-III two-Higgs-doublet model from tree-level FCNC processes (Bs,d→μ+μ−, KL→μ+μ−, D¯¯¯0→μ+μ−, ΔF=2 processes, τ−→μ−μ+μ−, τ−→e−μ+μ− and μ−→e−e+e−) and observe that all flavor off-diagonal elements of these couplings, except ϵu32,31 and ϵu23,13, must be very small in order to satisfy the current experimental bounds. In a third step, we consider Higgs mediated loop contributions to FCNC processes [b→s(d)γ, Bs,d mixing, K−K¯¯¯ mixing and μ→eγ] finding that also ϵu13 and ϵu23 must be very small, while the bounds on ϵu31 and ϵu32 are especially weak. Furthermore, considering the constraints from electric dipole moments we obtain constrains on some parameters ϵu,ℓij. Taking into account the constraints from FCNC processes we study the size of possible effects in the tauonic B decays (B→τν, B→Dτν and B→D∗τν) as well as in D(s)→τν, D(s)→μν, K(π)→eν, K(π)→μν and τ→K(π)ν which are all sensitive to tree-level charged Higgs exchange. Interestingly, the unconstrained ϵu32,31 are just the elements which directly enter the branching ratios for B→τν, B→Dτν and B→D∗τν. We show that they can explain the deviations from the SM predictions in these processes without fine-tuning. Furthermore, B→τν, B→Dτν and B→D∗τν can even be explained simultaneously. Finally, we give upper limits on the branching ratios of the lepton flavor-violating neutral B meson decays (Bs,d→μe, Bs,d→τe and Bs,d→τμ) and correlate the radiative lepton decays (τ→μγ, τ→eγ and μ→eγ) to the corresponding neutral current lepton decays (τ−→μ−μ+μ−, τ−→e−μ+μ− and μ−→e−e+e−). A detailed Appendix contains all relevant information for the considered processes for general scalar-fermion-fermion couplings.

Ligament origins are preserved in distal radial intraarticular two-part fractures: a computed tomography-based study

Background Operative fixation of intraarticular distal radius fractures is increasingly common. A greater understanding of fracture patterns will aid surgical fixation strategy. Previous studies have suggested that ligamentous insertions may less commonly be involved, but these have included heterogeneous groups of fractures and have not addressed Lister's tubercle. Purpose We hypothesize that fracture lines of distal radial intraarticular 2-part fractures have reproducible patterns. They propagate through the cortical bone between ligament origins and do not involve Lister's tubercle. Methods Axial CT scans of two-part intraarticular distal radius fractures were assessed independently by two examiners. The fractures were mapped onto a grid and the cortical breaches expressed as a percentile of the total radial width or length. The cortical breaches were compared with the ligamentous insertions on the distal and Lister's tubercle. Associated injuries were also documented. Results The cortical breaches occurred between the ligamentous insertions in 85%. Lister's tubercle was not involved in 95% of the fractures. Three major fracture patterns emerged: radial styloid, dorsal, and volar. Each major pattern had two subtypes. Associated injuries were common. Scapholunate dissociation was associated with all types, not just the radial styloid fracture pattern. Conclusions The fracture patterns of two-part intraarticular fractures mostly involved the interligamentous zones. Three major groups were identified: dorsal, volar, and radial styloid. Lister's tubercle was preserved with fractures tending to propagate radial or ulnar to this structure. We suggest conceptualizing fracture fragments as osseo-ligamentous units to aid prediction of fracture patterns and associated injury. Study Design Diagnostic III Level of Evidence 3.

Learning to drive: learners' self-reported cognitive failure level predicts driving instructor's observation rating of driving performance

OBJECTIVES Evidence increases that cognitive failure may be used to screen for drivers at risk. Until now, most studies have relied on driving learners. This exploratory pilot study examines self-report of cognitive failure in driving beginners and error during real driving as observed by driving instructors. METHODS Forty-two driving learners of 14 driving instructors filled out a work-related cognitive failure questionnaire. Driving instructors observed driving errors during the next driving lesson. In multiple linear regression analysis, driving errors were regressed on cognitive failure with the number of driving lessons as an estimator of driving experience controlled. RESULTS Higher cognitive failure predicted more driving errors (p < .01) when age, gender and driving experience were controlled in analysis. CONCLUSIONS Cognitive failure was significantly associated with observed driving errors. Systematic research on cognitive failure in driving beginners is recommended.

Early follicular testosterone level predicts preference for masculinity in male faces — But not for women taking hormonal contraception

It has been shown that women’s preference for masculinity in male faces changes across the menstrual cycle. Preference for masculinity is stronger when conception probability is high than when it is low. These findings have been linked to cyclic fluctuations of hormone levels. The purpose of the present study is to further investigate the link between gonadal steroids (i.e. testosterone, estradiol, and progesterone) and masculinity preference in women, while holding the cycle phase constant. Sixty-two female participants were tested in their early follicular cycle phase, when conception probability is low. Participants were shown face pairs and where asked to choose the more attractive face. Face pairs consisted of a masculinized and feminized version of the same face. For naturally cycling women we found a positive relationship between saliva testosterone levels and masculinity preference, but there was no link between any hormones and masculinity preference for women taking hormonal contraception. We conclude that in naturally cycling women early follicular testosterone levels are associated with masculinity preference. However, these hormonal links were not found for women with artificially modified hormonal levels, that is, for women taking hormonal contraception.

Stratigraphic analysis of lake level fluctuations in Lake Ohrid: an integration of high resolution hydro-acoustic data and sediment cores

Abstract. Ancient Lake Ohrid is a steep-sided, oligotrophic, karst lake that was tectonically formed most likely within the Pliocene and often referred to as a hotspot of endemic biodiversity. This study aims on tracing significant lake level fluctuations at Lake Ohrid using high-resolution acoustic data in combination with lithological, geochemical, and chronological information from two sediment cores recovered from sub-aquatic terrace levels at ca. 32 and 60m water depth. According to our data, significant lake level fluctuations with prominent lowstands of ca. 60 and 35m below the present water level occurred during Marine Isotope Stage (MIS) 6 and MIS 5, respectively. The effect of these lowstands on biodiversity in most coastal parts of the lake is negligible, due to only small changes in lake surface area, coastline, and habitat. In contrast, biodiversity in shallower areas was more severely affected due to disconnection of today sublacustrine springs from the main water body. Multichannel seismic data from deeper parts of the lake clearly image several clinoform structures stacked on top of each other. These stacked clinoforms indicate significantly lower lake levels prior to MIS 6 and a stepwise rise of water level with intermittent stillstands since its existence as water-filled body, which might have caused enhanced expansion of endemic species within Lake Ohrid.

Pelagic molybdenum concentration anomalies and the impact of sediment resuspension on the molybdenum budget in two tidal systems of the North Sea

The seasonal dynamics of molybdenum (Mo) were studied in the water column of two tidal basins of the German Wadden Sea (Sylt-Rømø and Spiekeroog) between 2007 and 2011. In contrast to its conservative behaviour in the open ocean, both, losses of more than 50% of the usual concentration level of Mo in seawater and enrichments up to 20% were observed repeatedly in the water column of the study areas. During early summer, Mo removal by adsorption on algae-derived organic matter (e.g. after Phaeocystis blooms) is postulated to be a possible mechanism. Mo bound to organic aggregates is likely transferred to the surface sediment where microbial decomposition enriches Mo in the pore water. First δ98/95Mo data of the study area disclose residual Mo in the open water column being isotopically heavier than MOMo (Mean Ocean Molybdenum) during a negative Mo concentration anomaly, whereas suspended particulate matter shows distinctly lighter values. Based on field observations a Mo isotope enrichment factor of ε = −0.3‰ has been determined which was used to argue against sorption on metal oxide surfaces. It is suggested here that isotope fractionation is caused by biological activity and association to organic matter. Pelagic Mo concentration anomalies exceeding the theoretical salinity-based concentration level, on the other hand, cannot be explained by replenishment via North Sea waters alone and require a supply of excess Mo. Laboratory experiments with natural anoxic tidal flat sediments and modelled sediment displacement during storm events suggest fast and effective Mo release during the resuspension of anoxic sediments in oxic seawater as an important process for a recycling of sedimentary sulphide bound Mo into the water column.

Two decades of measuring environmental attitudes: A comparative analysis of 33 countries

This paper analyzes the development of environmental concern by using the three waves of the environmental modules of the International Social Survey Programme. First, we discuss the measurement of environmental concern and construct a ranking of countries according to the new 2010 results. Second, we analyze the determinants of environmental concern by employing multilevel models that take individual as well as context effects into account. Third, we explore the longitudinal aspect of the data at the macro level in order to uncover the causal relation between countries’ wealth and environmental concern. The results show that environmental concern is closely correlated with the wealth of the nations. However, environmental concern decreased in almost all nations slightly during the last two decades. The decline was lower in countries with improving economic conditions suggesting that economic growth helps to maintain higher levels of environmental concern.

Lectin binding patterns in two cultured endothelial cell types derived from bovine corpus luteum

Epithelial cells of different phenotypes derived from bovine corpus luteum have been studied intensively in our laboratory. In this study, specific lectin binding was examined for cells of type 1 and 3, which were defined as endothelial cells. In order to confirm differences in their glycocalyx at the light microscopic level, five biotinylated lectins were applied to postconfluent cultures which had been fixed with buffered paraformaldehyde or glutaraldehyde. Cells were not permeabilized with any detergent. Lectin binding was localized with a streptavidin-peroxidase complex which was visualized with two different techniques. The DAB technique detected peroxidase histochemically, while the immunogold technique used an anti-peroxidase gold complex together with silver amplification. Neither cell type 1 nor cell type 3 bound a particular lectin selectively, yet each cell type expressed a particular lectin binding pattern. With the DAB technique, diverse lectin binding patterns were seen, probably indicating either "outside" binding, i.e., a diffuse pattern, a lateral-cell-side pattern and a microvillus-like pattern, or "inside" binding, i.e., a diffuse pattern, and a granule-like pattern. With the immunogold technique, only "outside" binding was observed. In addition, the patterns of single cilia or of single circles were detected, the latter roughly representing 3-micron-sized binding sites for concanavalin A. When localizing them at the ultrastructural level, single circles corresponded with micron-sized discontinuities of the plasma membrane. Shedding vesicles were detected whose outer membrane was labelled with concanavalin A. Our results confirm the diversity of the two cell types under study. The "inside" lectin binding may be caused by way of transient plasma membrane openings and related to shedding of right-side out vesicles ("ectocytosis").

Analysis of ⁸⁵Kr: a comparison at the 10-14 level using micro-liter samples

The isotopic abundance of 85Kr in the atmosphere, currently at the level of 10−11, has increased by orders of magnitude since the dawn of nuclear age. With a half-life of 10.76 years, 85Kr is of great interest as tracers for environmental samples such as air, groundwater and ice. Atom Trap Trace Analysis (ATTA) is an emerging method for the analysis of rare krypton isotopes at isotopic abundance levels as low as 10−14 using krypton gas samples of a few micro-liters. Both the reliability and reproducibility of the method are examined in the present study by an inter-comparison among different instruments. The 85Kr/Kr ratios of 12 samples, in the range of 10−13 to 10−10, are measured independently in three laboratories: a low-level counting laboratory in Bern, Switzerland, and two ATTA laboratories, one in Hefei, China, and another in Argonne, USA. The results are in agreement at the precision level of 5%.