Ensemble codes involving hippocampal neurons are at risk during delayed performance tests

Multielectrode recording techniques were used to record ensemble activity from 10 to 16 simultaneously active CA1 and CA3 neurons in the rat hippocampus during performance of a spatial delayed-nonmatch-to-sample task. Extracted sources of variance were used to assess the nature of two different types of errors that accounted for 30% of total trials. The two types of errors included ensemble “miscodes” of sample phase information and errors associated with delay-dependent corruption or disappearance of sample information at the time of the nonmatch response. Statistical assessment of trial sequences and associated “strength” of hippocampal ensemble codes revealed that miscoded error trials always followed delay-dependent error trials in which encoding was “weak,” indicating that the two types of errors were “linked.” It was determined that the occurrence of weakly encoded, delay-dependent error trials initiated an ensemble encoding “strategy” that increased the chances of being correct on the next trial and avoided the occurrence of further delay-dependent errors. Unexpectedly, the strategy involved “strongly” encoding response position information from the prior (delay-dependent) error trial and carrying it forward to the sample phase of the next trial. This produced a miscode type error on trials in which the “carried over” information obliterated encoding of the sample phase response on the next trial. Application of this strategy, irrespective of outcome, was sufficient to reorient the animal to the proper between trial sequence of response contingencies (nonmatch-to-sample) and boost performance to 73% correct on subsequent trials. The capacity for ensemble analyses of strength of information encoding combined with statistical assessment of trial sequences therefore provided unique insight into the “dynamic” nature of the role hippocampus plays in delay type memory tasks.

Influence analysis of robust Wald-type tests

We consider a robust version of the classical Wald test statistics for testing simple and composite null hypotheses for general parametric models. These test statistics are based on the minimum density power divergence estimators instead of the maximum likelihood estimators. An extensive study of their robustness properties is given though the influence functions as well as the chi-square inflation factors. It is theoretically established that the level and power of these robust tests are stable against outliers, whereas the classical Wald test breaks down. Some numerical examples confirm the validity of the theoretical results.

Generación automática de tests en DomJudge

Los jueces online están cobrando cada día más importancia, especialmente en el ámbito de la enseñanza. Su funciona-miento es simple, un juez/profesor sube un problema de programación con un enunciado y unos casos de prueba (entradas y salidas esperadas) al juez online. El alumno/concursante deberá subir el código que considera como solución al problema. Si el código del alumno devuelve las mismas salidas que las que se encuentran en los casos de prueba para las correspondientes entradas en los test-cases dada las mismas entradas, el código se considera correcto. En la Facultad de Informática de la Universidad Complutense de Madrid ha aparecido un juez virtual que cada vez está siendo más usado por los docentes como complemento a la hora de evaluar. Este juez online es DomJudge. DomJudge es un juez online desarrollado en la universidad de Utrecht con el fin de ser un juez virtual de concursos de programación. Su código es libre y se puede descargar y modificar, lo que lo hace ideal si se quiere adaptar su funcionamiento. Es bien sabido que generar casos de prueba de calidad es una tarea muy compleja. Existen diversas técnicas que ayudan a la generación automática de tests. Por ejemplo, la ejecución simbólica permite generar tests garantizando que todos los caminos de ejecución del programa son ejercitados hasta una cierta profundidad. El objetivo de este proyecto es hacer uso de estas técnicas de testing para generar casos de prueba de forma automática. Para que la autoevaluación realizada por estos jueces sea efectiva, los profesores deben proporcionar casos de prueba de calidad que son ejecutados automáticamente cuando los alumnos suben sus soluciones. Escribir estos casos de prueba resulta costoso y complejo, y es en este punto, donde el uso de jPET podría resultar muy útil. Los casos de prueba generados por jPET podrían servir como punto de partida a la hora de generar un conjunto de casos de prueba de calidad. Un aspecto muy interesante en este sentido, es que no es necesario que los programas de los alumnos uti licen el lenguaje Java. Lo único que sería necesario es que el profesor proporcione una solución escrita en Java. A partir de esta se podrían generar los casos de prueba iniciales. Si se diese el caso de que las soluciones de los alumnos viniesen escritas en Java, se podrían plantear enfoques más interesantes en los cuales los tests se forman a partir de ambas soluciones. La del alumno, para generarlos datos de entrada, y la del profesor, para chequear que las salidas para esas entradas son las correctas. Por eso hemos llevado a cabo no solo una traducción automática del xml generado por JPET en ficheros in y out. Sino una total integración con el sistema DomJudge para poder generar los casos de prueba sin intermediarios. Gracias a esta integración podemos facilitar el trabajo de los profesores a la hora de crear problemas en jueces online y conseguimos una generación automática de tests en DomJudge.

Portfolio efficiency tests with conditioning information using empirical likelihood estimation

We evaluate the use of Generalized Empirical Likelihood (GEL) estimators in portfolios efficiency tests for asset pricing models in the presence of conditional information. Estimators from GEL family presents some optimal statistical properties, such as robustness to misspecification and better properties in finite samples. Unlike GMM, the bias for GEL estimators do not increase as more moment conditions are included, which is expected in conditional efficiency analysis. We found some evidences that estimators from GEL class really performs differently in small samples, where efficiency tests using GEL generate lower estimates compared to tests using the standard approach with GMM. With Monte Carlo experiments we see that GEL has better performance when distortions are present in data, especially under heavy tails and Gaussian shocks.

Assessment of CO2 adsorption capacity on activated carbons by a combination of batch and dynamic tests

In this work, batch and dynamic adsorption tests are coupled for an accurate evaluation of CO2 adsorption performance for three different activated carbons obtained from olives stones by chemical activation followed by physical activation with CO2 at varying times, i.e. 20, 40 and 60 h. Kinetic and thermodynamic CO2 adsorption tests from simulated flue-gas at different temperature and CO2 pressure are carried out both in batch (a manometric equipment operating with pure CO2) and dynamic (a lab-scale fixed-bed column operating with CO2/N2 mixture) conditions. The textural characterization of the activated carbon samples shows a direct dependence of both micropore and ultramicropore volume on the activation time, hence AC60 has the higher contribution. The adsorption tests conducted at 273 and 293 K showed that, when CO2 pressure is lower than 0.3 bar, the lower the activation time the higher CO2 adsorption capacity and a ranking ωeq(AC20)>ωeq(AC40)>ωeq(AC60) can be exactly defined when T= 293 K. This result can be likely ascribed to a narrower pore size distribution of the AC20 sample, whose smaller pores are more effective for CO2 capture at higher temperature and lower CO2 pressure, the latter representing operating conditions of major interest for decarbonation of a flue-gas effluent. Moreover, the experimental results obtained from dynamic tests confirm the results derived from the batch tests in terms of CO2 adsorption capacity. It is important to highlight that the adsorption of N2 on the synthesized AC samples can be considered negligible. Finally, the importance of a proper analysis of characterization data and adsorption experimental results is highlighted for a correct assessment of CO2 removal performances of activated carbons at different CO2 pressure and operating temperature.

An improved procedure for obtaining and maintaining well characterized partial water saturation states on concrete samples to be used for mass transport tests

A conditioning procedure is proposed allowing to install into the concrete specimens any selected value of water saturation degree with homogeneous moisture distribution. This is achieved within the least time and the minimum alteration of the concrete specimens. The protocol has the following steps: obtaining basic drying data at 50 °C (water absorption capacity and drying curves); unidirectional drying of the specimens at 50 °C until reaching the target saturation degree values; redistribution phase in closed containers at 50 °C (with measurement of the quasi-equilibrium relative humidities); storage into controlled environment chambers until and during mass transport tests, if necessary. A water transport model is used to derive transport parameters of the tested materials from the drying data, i.e., relative permeabilities and apparent water diffusion coefficients. The model also allows calculating moisture profiles during isothermal drying and redistribution phases, thus allowing optimization of the redistribution times for obtaining homogeneous moisture distributions.

Improving some thermodynamic consistency tests for VLE data evaluation

Thermodynamics Conference 2013 (Statistical Mechanics and Thermodynamics Group of the Royal Society of Chemistry), The University of Manchester, 3-6 September 2013.

Shaking-table tests of flat-bottom circular silos containing grain-like material

According to Eurocode 8, the seismic design of flat-bottom circular silos containing grain-like material is based on a rough estimate of the inertial force imposed on the structure by the ensiled content during an earthquake: 80% of the mass of the content multiplied by the peak ground acceleration. A recent analytical consideration of the horizontal shear force mobilised within the ensiled material during an earthquake proposed by some of the authors has resulted in a radically reduced estimate of this load suggesting that, in practice, the effective mass of the content is significantly less than that specified. This paper describes a series of laboratory tests that featured shaking table and a silo model, which were conducted in order to obtain some experimental data to verify the proposed theoretical formulations and to compare with the established code provisions. Several tests have been performed with different heights of ensiled material – about 0.5 mm diameter Ballotini glass – and different magnitudes of grain–wall friction. The results indicate that in all cases, the effective mass is indeed lower than the Eurocode specification, suggesting that the specification is overly conservative, and that the wall–grain friction coefficient strongly affects the overturning moment at the silo base. At peak ground accelerations up to around 0.35 g, the proposed analytical formulation provides an improved estimate of the inertial force imposed on such structures by their contents.

Ventilated Stone Veneer: Mechanical Behaviour, Calculation Methodologies, Major Pathologies and Existing Tests

The increase of building pathologies related to the use of stone materials and the use of ventilated stone veneers, requires the reformulation of design concepts in building façades and also the reformulation of the architectural project. The aim of this paper is to identify, analyze and evaluate synthetically building pathologies in stone ventilated façades in order to obtain the main technical conditions to be considered in the architectural design, by interpreting its mechanical behavior and capabilities to prevent such pathologies and to ensure the proper features during the building lifetime. The methodology is based on both laboratory stone tests and in situ tests about construction systems, by analyzing physical and mechanical behavior of the outer layer in relation to other building requirements. The results imply the need of proper sizing, specific quality control and practical application of calculation methods, to control high concentration pressures in ventilated façades by reaching appropriate project solutions. In conclusion, the research about different pathologies of stone ventilated façades, the study of their mechanical behavior, their anchorage and their connection with their constructive aspects, will help to improve the construction quality of the stone ventilated façade in buildings and to enhance the use of natural stone in modern architecture.

ISSP Position Stand: To Test or Not to Test? The Use of Physical Skill Tests in Early Phases of Sport Development

A Searching for talent and the assessing ability in young prospects from individual and team sports often include measurement, analysis, and evaluation of physical and motor skills. The use of these tests in early stages of talent development has been widely observed in both female and male prospects. The purpose of this paper is to review a series of studies conducted on talented and less-talented athletes/ players that were aimed at distinguishing between the two groups and at predicting the athletes’/players’ future achievements/success. Thirteen studies examining the use of physical and motor skill tests in young prospects are reviewed. Based on this review, four main observations are highlighted and a number of benefits and limitations associated with the use of such tests are discussed. It is recommended that (1) coaches reduce the number of batteries of physical and motor skill tests used in early phases of talent development and (2) coaches and sport scientists specializing in measurement and evaluation cooperate in order to improve the effectiveness of the application and interpretation of physical skill tests given to prospects at early stages of talent development.