Emission lines of Fe X in active region spectra obtained with the Solar Extreme-ultraviolet Research Telescope and Spectrograph

Fully relativistic calculations of radiative rates and electron impact excitation cross-sections for Fe X are used to derive theoretical emission-line ratios involving transitions in the 174-366 angstrom wavelength range. A comparison of these with solar active region observations obtained during the 1989 and 1995 flights of the Solar Extreme-ultraviolet Research Telescope and Spectrograph (SERTS) reveals generally very good agreement between theory and experiment. Several Fe X emission features are detected for the first time in SERTS spectra, while the 3s(2)3p(5) P-2(3/2)-3s(2)3p(4)(S-1)3d D-2(3/2) transition at 195.32 angstrom is identified for the first time (to our knowledge) in an astronomical source. The most useful Fe X electron density (N-e) diagnostic line ratios are assessed to be 175.27/174.53 and 175.27/177.24, which both involve lines close in wavelength and free from blends, vary by factors of 13 between N-e = 10(8) and 10(11) cm(-3), and yet show little temperature sensitivity. Should these lines not be available, then the 257.25/345.74 ratio may be employed to determine N-e, although this requires an accurate evaluation of the instrument intensity calibration over a relatively large wavelength range. However, if the weak 324.73 angstrom line of Fe X is reliably detected, the use of 324.73/345.74 or 257.25/324.73 is recommended over 257.25/345.74. Electron densities deduced from 175.27/174.53 and 175.27/177.24 for the stars Procyon and alpha Cen, using observations from the Extreme-Ultraviolet Explorer (EUVE) satellite, are found to be consistent and in agreement with the values of N-e determined from other diagnostic ratios in the EUVE spectra. A comparison of several theoretical extreme-ultraviolet Fe X line ratios with experimental values for a theta-pinch, for which the plasma parameters have been independently determined, reveals reasonable agreement between theory and observation, providing some independent support for the accuracy of the adopted atomic data.

Time-dependent R -matrix theory for ultrafast atomic processes

We describe an ab initio nonperturbative time-dependent R-matrix theory for ultrafast atomic processes. This theory enables investigations of the interaction of few-femtosecond and -attosecond pulse lasers with complex multielectron atoms and atomic ions. A derivation and analysis of the basic equations are given, which propagate the atomic wave function in the presence of the laser field forward in time in the internal and external R-matrix regions. To verify the accuracy of the approach, we investigate two-photon ionization of Ne irradiated by an intense laser pulse and compare current results with those obtained using the R-matrix Floquet method and an alternative time-dependent method. We also verify the capability of the current approach by applying it to the study of two-dimensional momentum distributions of electrons ejected from Ne due to irradiation by a sequence of 2 as light pulses in the presence of a 780 nm laser field.

The feminine character and temporal freedom in three historical novels by Angelina Muñiz: Morada interior (1972), "El Mercader de Tudela" (1995) y "La Burladora de Toledo" (2008)

We focus on the representation of time in Muñiz’s historical novels. Concretely, we stress the attitude of the feminine characters towards time and history. Muñiz’s female personages continuously transgress temporal borders and move freely between different historical periods. We relate Muñiz’s particular vision on time and on the separation lines between historical periods to her situation as an exile. The author is continuously crossing borders between the past of her homeland and the present of her adoptive country. We argument Muñiz is recreating this “borderfree” attitude towards time in the female characters of her historical novels.

Characterisation of fluidised bed granulation processes using in situ Raman spectroscopy

Previous work by the authors Walker et al. [2007b. Fluidised bed characterisation using Raman spectroscopy: applications to pharmaceutical processing. Chemical Engineering Science 62, 3832–3838] illustrated that Raman spectroscopy could be used to provide 3-D maps of the concentration and chemical structure of particles in motion in a fluidised bed, within a relatively short (120 s) time window. Moreover, we reported that the technique, as outlined, has the potential to give detailed in-situ information on how the structure and composition of granules/powders within the fluidised bed (dryer or granulator) vary with the position and evolve with time. In this study we extended the original work by shortening the time window of the Raman spectroscopic analysis to 10 s, which has allowed the in-situ real-time characterisation of a fluidised bed granulation process. Here we show an important new use of the technique which allows in-situ measurement of the composition of the material within the fluidised bed in three spatial dimensions and as a function of time. This is achieved by recording Raman spectra using a probe positioned within the fluidised bed on a long-travel x–y–z stage. In these experiments the absolute Raman intensity is used to provide a direct measure of the amount of any given material in the probed volume, i.e. a particle density. Particle density profiles have been calculated over the granulation time and show how the volume of the fluidised bed decreases with an increase mean granule size. The Raman spectroscopy analysis indicated that nucleation/coalescence in this co-melt fluidised hot melt granulation system occurred over a relatively short time frame (t<30 s). The Raman spectroscopic technique demonstrated accurate correlation with independent granulation experiments which provided particle size distribution analysis. The similarity of the data indicates that the Raman spectra accurately represent solids ratios within the bed, and thus the techniques quantitative capabilities for future use in the pharmaceutical industry.

La crítica de Plotino a la concepción aristotélica del tiempo en "En". III 7

El presente trabajo intenta mostrar de qué manera Plotino refuta la noción aristotélica del tiempo como «número» o «medida del movimiento», cuáles son las aporías que plantea, cómo las compulsa con sus propios argumentos y qué soluciones propone con respecto a esa misma confrontación. Todo esto será encauzado a partir de un estudio descriptivo y analítico, acompañado de una lectura a la vez hermenéutica y crítica de los textos seleccionados para esta ocasión.

Assessment of Self-Compacting Concrete Immersed in Acidic Solutions

Ettringite and thaumasite can be found among the deterioration products of cementitious materials exposed to sulfate and hydrochloric attack. The results of a test program to investigate the acid resistance of self-compacting concrete (SCC) and conventional concrete (CC), immersed up to 18 weeks at 20°C in sulfuric and hydrochloric acid solutions, are described. The SCC was prepared with 47% carboniferous limestone powder, as a replacement for cement, and an ordinary portland cement. The CC was prepared with portland cement only. The water-binder ratios of the SCC and CC were 0.36 and 0.46, respectively. The parameter investigated was the time, in weeks, taken to cause 10% mass loss of fully immersed concrete specimens in a 1% solution of sulfuric acid and the same amount of loss in a 1% solution of hydrochloric acid. The investigation indicated that the SCC performed better than the CC in sulfuric solution but was slightly more vulnerable to hydrochloric acid attack compared to CC. The mode of attack between the two solutions was different.

Use of Digital Manufacturing to Improve Management Learning in Aerospace Assembly

The primary goal of this work is to quantify any bene?ts that the use of digital manufacturing methods can offer when used upstream from production, for manufacturing process design, and tool development. Learning at this stage of product development is referred to as management learning. Animated build simulations have been used to develop build procedures and tooling for a panel assembly for the new Bombardier CRJ1000 (Canadair Regional Jet, 100 seat). When the jig format was developed, its simulated performance was compared to that of current CRJ700/900 panel builds to identify and quantify any improvements in terms of tooling cost and panel build time. When comparing like-for-like functions between existing CRJ700/900 (Canadair Regional Jet, 70/90 seat) and the
CRJ1000 tooling, it was predicted that the digitally assisted improvements had brought about a 4.9% reduction in jig cost. An evaluation of the build process for the CRJ1000 uplock panel predicted a 5.2% reduction in the assembly time. In addition to the improvement of existing tooling functions, new jig functionality was added so that both the drilling and riveting functions could be carried out in a single jig for the new RJ1000 panel.

The Architecture of Seduction: An Analysis on Digital Architectures within Consumer Society

Currently new digital tools used in architecture are often at the service of a conception of architecture as a consumer society’s cultural good. Within this neoliberal cultural frame, architects’ social function is no longer seen as the production of urban facts with sense of duty, but as a part within the symbolic logic that rules the social production of cultural values as it was defined by Veblen and developed by Baudrillard. As a result, the potential given by the new digital tools used in representation has shifted from an instrument used to verify a built project to two different main models: At the one hand the development of pure virtual architectures that are exclusively configured within their symbolic value as artistic “images” easily reproducible. On the other hand the development of all those projects which -even maintaining their attention to architecture as a built fact- base their symbolic value on the author’s image and on virtual aesthetics and logics that prevail over architecture’s materiality. Architects’ sense of duty has definitely reached a turning point.

Chemosensory learning in the chicken embryo

Examined how exposure to a chemosensory stimulus prior to hatching affects subsequent chemosensory preferences of newly hatched chicks. The chicks' preferences were assessed at 2 days after hatching using an olfactory preference test (strawberry-smelling shavings vs water-coated shavings) and at 4 days after hatching using a gustatory preference test (strawberry-flavoured water vs unflavoured water). With no exposure to strawberry before hatching, strawberry was highly aversive to chicks after hatching. However, following exposure to strawberry before hatching, chicks expressed a greater preference for (or weaker aversion to) the strawberry stimulus. Chicks exposed to strawberry before hatching drank more strawberry-flavoured water and spent more time in a strawberry-scented area than chicks having no exposure before hatching. This change in preference was specific to the stimulus experienced before hatching and was present in the absence of any posthatching exposure to the stimulus. Results demonstrate that a chick's chemosensory preferences are changed as a result of experience with a stimulus before hatching and are suggestive of learning.

Gender differences in aggressive behaviour in convict cichlids

Males and females of many species engage in agonistic encounters. However, differing selection pressures on each sex are predicted to result in sex differences in aggressive behaviour during contests. Comparing male and female intrasexual contests can yield intriguing differences, shedding light on the forces shaping the use of particular aggressive tactics. We investigated whether fundamental gender-related differences in aggression, not explained by current parental role, are present in convict cichlids, Amatitlania nigrofasciata. Intrasexual agonistic encounters between isolated males and between isolated females not previously paired to a breeding partner were staged. Using this approach we first tested for behavioural differences between the sexes. Second, using a novel startle technique aimed at probing motivation to fight, we tested for gender-related differences in aggressive motivation. Third, we examined whether size, rather than gender, plays a role in determining the tactics used during contests. In addressing these aims we found: (1) females used more frontal display and biting, and spent more time in close proximity to their opponent, whereas males used more lateral display and tail beating than females during agonistic encounters; (2) there was no difference in the response of male or female convict cichlids to a startling stimulus aimed at probing motivation to fight; and (3) the addition of focal weight and length as possible covariates had no significant effect on the analyses. Possible causal and functional reasons for these gender-related differences in fight tactics are discussed. (C) 2009 The Association for the Study of Animal Behaviour. Published by Elsevier Ltd. All rights reserved.

The Design Process- Making It Relevant For Students

Within the ever-changing arenas of architectural design and education, the core element of architectural education remains: that of the design process. The consideration of how to design in addition to what to design presents architectural educators with that most constant and demanding challenge of how do we best teach the design process?

This challenge is arguably most acute at a student's early stages of their architectural education. In their first years in architecture, students will commonly concentrate on the end product rather than the process. This is, in many ways, understandable. A great deal of time, money and effort go into their final presentations. They believe that it is what is on the wall that is going to be assessed. Armed with new computer skills, they want to produce eye-catching graphics that are often no more than a celebration of a CAD package. In an era of increasing speed, immediacy of information and powerful advertising it is unsurprising that students want to race quickly to presenting an end-product.

Recognising that trend, new teaching methods and models were introduced into the second year undergraduate studio over the past two years at Queen's University Belfast, aimed at promoting student self-reflection and making the design process more relevant to the students. This paper will first generate a critical discussion on the difficulties associated with the design process before outlining some of the methods employed to help promote the following; an understanding of concept, personalisation of the design process for the individual student; adding realism and value to the design process and finally, getting he students to play to their strengths in illustrating their design process like an element of product. Frameworks, examples, outcomes and student feedback will all be presented to help illustrate the effectiveness of the new strategies employed in making the design process firstly, more relevant and therefore secondly, of greater value, to the architecture student.

Who goes where? Young children's pathways through care in Northern Ireland

This is one of a series of articles reporting on the large-scale ‘Northern Ireland Care Pathways and Outcomes Study’ (McSherry et al, 2008). The study has been examining a population of young children (n=374) who were in care under five years of age in Northern Ireland, and initially followed them across a four-year period (2000-2004). It has mapped these young children’s care careers, and explored factors relating to five care pathways that these children progressed along, i.e. towards adoption; long-term non-relative foster care; long-term relative foster care; Residence Order; and return to birth parent/s. This paper will examine the children’s care pathway patterns from 2000 to 2004, and will identify the background factors that appear to have influenced their specific care pathway. These background factors relate to the age of child, length of time in care, the child’s health, the child’s behaviour and regional variation. The findings indicate that although the care pathway patterns were to some extent similar to England and Wales, there were differences apparent to the Northern Ireland context.

Specific growth rate plays a critical role in hydrogen peroxide resistance of the marine oligotrophic ultramicrobacterium Sphingomonas alaskensis strain RB2256

The marine oligotrophic ultramicrobacterium Sphingomonas alaskensis RB2256 has a physiology that is distinctly different from that of typical copiotrophic marine bacteria, such as Vibrio angustum S14. This includes a high level of inherent stress resistance and the absence of starvation-induced stress resistance to hydrogen peroxide. In addition to periods of starvation in the ocean, slow nutrient-limited growth is likely to be encountered by oligotrophic bacteria for substantial periods of time. In this study we examined the effects of growth rate on the resistance of S. alaskensis RB2256 to hydrogen peroxide under carbon or nitrogen limitation conditions in nutrient-limited chemostats. Glucose-limited cultures of S. alaskensis RB2256 at a specific growth rate of 0.02 to 0.13 h(-1) exhibited 10,000-fold-greater viability following 60 min of exposure to 25 mM hydrogen peroxide than tells growing at a rate of 0.14 h(-1) or higher. Growth rate control of stress resistance was found to be specific to carbon and energy limitation in this organism. In contrast, V. angustum S14 did not exhibit growth rate-dependent stress resistance. The dramatic switch in stress resistance that was observed under carbon and energy limitation conditions has not been described previously in bacteria and thus may be a characteristic of the oligotrophic ultramicrobacterium, Catalase activity varied marginally and did not correlate with the growth rate, indicating that hydrogen peroxide breakdown was not the primary mechanism of resistance. More than 1,000 spots were resolved on silver-stained protein gels for cultures growing at rates of 0.026, 0.076, and 0.18 h(-1). Twelve protein spots had intensities that varied by more than twofold between growth rates and hence are likely to be important for growth rate-dependent stress resistance. These studies demonstrated the crucial role that nutrient limitation plays in the physiology of S. alaskensis RB2256, especially under oxidative stress conditions.

The effect of feeding a high fibre diet on the welfare of sows housed in large dynamic groups

This study assessed the effect of increasing fibre levels in the concentrate ration on the welfare of sows housed in a large dynamic group. One hundred and twelve Large White x Landrace sows were allocated to one of two treatments over six replicates. Treatments were as follows: (i) High Fibre diet (similar to 15% CF [Crude Fibre]), and (ii) Control diet (similar to 5% CF). Treatments were applied to two separate dynamic groups each containing 33 (+/- 3) sows in a cross-over design, after three replicates the treatments were switched between the groups. Approximately nine sows were replaced in each of these groups at 3-week intervals (each replacement constituting a replicate of the study). Sows on the high fibre diet spent a greater percentage of time lying (High Fibre: 43.8, Control. 28.0, SEM 3.25%), while sows on the control diet spent more time sham chewing (High Fibre: 7.2, Control: 28.8, SEM 1.55%). Sows newly introduced to the group on the high fibre treatment spent proportionally more time in the kennel areas compared to newly introduced sows in the control treatment (High Fibre. 0.893, Control. 0 788, SEM 5 10) In general, aggression occurred at a very low frequency and overall levels did not differ between treatments (High Fibre: 0.005, Control: 0.003, SEM 0.0007 [occurrences per min)). However, sows in the control treatment performed head thrusting (High Fibre: 0.02, Control: 0.00, SEM 0.001 [occurrences per mini), and biting behaviour (High Fibre. 002, Control. 0.01, SEM 0.002 [occurrences per min]) more frequently than sows on the high fibre diet. There was no effect of treatment on physiological parameters such as plasma cortisol (High Fibre: 1.34, Control: 1.44, SEM 0.114 ng ml(-1)) or haptoglobin levels (High Fibre. 0.73, Control. 0.64, SEM 0.080 mg ml(-1)). In summary, provision of a high fibre diet had a positive effect on the welfare of group-housed dry sows Sows on the high fibre treatment spent more time resting in the kennel areas, less time performing stereotypic behaviours and showed a reduction in some aggressive behaviours relative to sows fed the control diet.

4 ◦C and beyond: what did this mean for biodiversity in the past?

How do the predicted climatic changes (IPCC, 2007) for the next century compare in magnitude and rate to those that Earth has previously encountered? Are there comparable intervals of rapid rates of temperature change, sea-level rise and levels of atmospheric CO2 that can be used as analogues to assess possible biotic responses to future change? Or are we stepping into the great unknown? This perspective article focuses on intervals in time in the fossil record when atmospheric CO2 concentrations increased up to 1200 ppmv, temperatures in mid- to high-latitudes increased by greater than 4 ?C within 60 years, and sea levels rose by up to 3 m higher than present. For these intervals in time, case studies of past biotic responses are presented to demonstrate the scale and impact of the magnitude and rate of such climate changes on biodiversity. We argue that although the underlying mechanisms responsible for these past changes in climate were very different (i.e. natural processes rather than anthropogenic), the rates and magnitude of climate change are similar to those predicted for the future and therefore potentially relevant to understanding future biotic response. What emerges from these past records is evidence for rapid community turnover, migrations, development of novel ecosystems and thresholds from one stable ecosystem state to another, but there is very little evidence for broad-scale extinctions due to a warming world. Based on this evidence from the fossil record, we make four recommendations for future climate-change integrated conservation strategies.