Phycochemical studies on sterols from three brown seaweeds of northern Arabian Sea

Three brown algae i.e. Dictyota hauckiana Nizamuddin, Levringia boergesenii Kylin and Spatoglossum variabile Figari et De Notaris, collected from the coastal areas of Karachi, have been investigated for their sterol composition. Four sterols with cholesta skeleton including a new one, 17α-hydroxy-24β-vinyl cholesterol have been isolated from them. Their structures were elucidated with the help of spectroscopic analysis. The new sterol has been named as hauckiosterol after its first source of isolation.

New insights to the molecular phylogenetics and generic assessment in the Rhacophoridae (Amphibia: Anura) based on five nuclear and three mitochondrial genes, with comments on the evolution of reproduction

The phylogenetic relationships among 12 genera of treefrogs (Family, Rhacophoridae), were investigated based on a large sequence data set, including five nuclear (brain-derived neurotrophic factor, proopiomelanocortin, recombination activating gene 1, tyr

Comparative feature on design, construction and installation of three different model of low cost solar tunnel dryers

The study was conducted in collaboration with the ECFC project of the FAO (BGD/97/017) in Cox's Bazar to develop a low cost solar tunnel dryer for the production of high quality marine dried fish. The study areas were Kutubdiapara, Maheshkhali and Shahparirdip under Cox's Bazar district. Three different models of low cost solar dryer were constructed with locally available materials such as bamboo, wood, bamboo mat, hemp, canvas, wire, nails, rope, tin, polythene and net. Size of the dryers were: 20x4x3 ft ; 30x3x3 ft and 65x3x3 ft with the costs of Tk. 3060, 3530, 9600 for dryer 1, 2 and 3, respectively having different models. The drying capacities were 50, 150, 500 kg for dryer 1, 2 and 3 respectively. The average temperature range inside the dryers were 29-43°C, 34-51°C and 37-57°C for dryer 1, 2 and 3 respectively as recorded at 8:30h to 16:30h. The relative humidity were in the ranges of 22-42%, 27-39% and 24-41 % in dryer 1, 2 and 3 respectively. The fish samples used were Bombay duck, Silver Jew fish and Ribbon fish. The total drying time was in the range of 30-42, 28-38 and 24-34 hours to reach the moisture content of 12.3-14.5, 11.8-14.3, and 11.6-14.1% in dryer 1, 2 and 3 respectively. Among these three fish samples the drying was faster in Silver Jew fish followed by Bombay duck and Ribbon fish in all the three dryer.

A comparative study on effects of Immunoster and Immunowall as immunostimulants on some hematological, biochemical and growth indices of farmed great sturgeon juveniles (Huso huso)

Prebiotics are non-digestible food ingredients that profitably affect the host by selectively stimulating the growth and /or activation of one or a limited number of bacteria in the intestine that can enhance host health status. Immunoster (IS) and Immunowall (IW) are prebiotics and immunostimulants derived from the outer cell wall of brewers yeast, Saccharomyces cerevisiae. These substances contain MOS and �-glucans. After a four-week acclimatization period to rearing conditions and basal diet, 450 farmed great sturgeon juveniles weighing 95.58 ± 9.38 g were randomly distributed into 15 fiberglass tanks (2 × 2 × 0.53 m) in five treatments (Control, IS 1%, IW 1%, IS 3%, and IW 3%) in three replicates (completely randomized design) and kept at a density of 30 fish per tank for a period of 8 weeks at water temperature 20.55 ± 5.11ºC, dissolved oxygen 6.73 ± 0.35 mg L-1 and pH 7.92 ± 0.09. IS and IW were added at two levels of 1% and 3% to the basal diet in place of cellulose, except the control. At the beginning, in the middle and at the end of the trial, carcass analysis was done to determine the moisture, protein, fat, ash, and total carbohydrate. Also, blood samples were collected to measure hematological, biochemical and immune indices. At the end of the trial, final weight, final length, body weight increase (BWI), specific growth rate (SGR), average daily growth (ADG), protein efficiency ratio (PER), feed conversion ratio (FCR), and condition factor (CF) in fish fed on IS and IW in both levels 1% and 3% showed some differences. These differences were significant in IS 3% and IW 1% and 3% compared with the control (P<0.05). HSI showed no significant difference (P>0.05) and survival rate was 100% in all treatments. Crude protein of carcass in fish fed on IS and IW at 1% and 3% showed an increase in comparison with the control. There was significant difference between IS 3% and the control in crude protein of carcass (P<0.05). Fish fed on IS and IW at 1% and 3% showed various results in hematological and biochemical factors. It was observed significant difference in MCV between IW 1% and IS 3% compared with the control (P<0.05). Although there was an increase in values of hematocrit, hemoglobin (except IS 1%), WBC (except IW 3%), MCH, neutrophil, total protein, albumin (except IS 3%), K+, and lysozyme in fish fed on IS and IW compared with the control, it was no significant (P>0.05). The maximum count of WBC and the highest value of Ca2+ were seen in IW 1%. The maximum count of lymphocyte, the highest values of total protein, albumin and IgM were recorded in IW 3%. IS 1% had the maximum count of neutrophil and the highest concentration of lysozyme. Based on obtained results, it can be declared that IS and IW at two levels of 1% and 3% can enhance growth performance and feed efficiency and also improve some hematological, biochemical, and immune indices in farmed great sturgeon juveniles.

The effect of acute stress on LTP and LTD induction in the hippocampal CA1 region of anesthetized rats at three different ages

Not all experiences are memorized equally well. Especially, some types of stress are unavoidable in daily life and the stress experience can be memorized for life. Previous evidence has showed that synaptic plasticity, such as long-term potentiation (LTP) that may be the major cellular model of the mechanism underlying learning and memory, is influenced by behavioral stress. However, the effect of behavioral stress on age-related synaptic plasticity in-vivo was primarily known. Here we found that the LTP induction in the hippocampal CA1 region of anesthetized rats obviously showed inverted-U shape related to ages (4, 10 and 74 weeks old rats), but low-frequency stimulation was unable to induce reliable long-term depression (LTD) in these animals. Furthermore, acute elevated platform (EP) stress enabled reliable LTD significantly and completely blocked LTP induction at these ages. Importantly, LTD after exposure to acute EP stress showed similar magnitude over these ages. The present results that stress enables LTD but impairs LTP induction at these three ages strengthen a view that stress experience-dependent LTD (SLTD) may underlie stress form of aberrant memories. (C) 2004 Elsevier B.V. All rights reserved.

High order schemes on three-dimensional general polyhedral meshes - Application to the level set method

In this article, we detail the methodology developed to construct arbitrarily high order schemes - linear and WENO - on 3D mixed-element unstructured meshes made up of general convex polyhedral elements. The approach is tailored specifically for the solution of scalar level set equations for application to incompressible two-phase flow problems. The construction of WENO schemes on 3D unstructured meshes is notoriously difficult, as it involves a much higher level of complexity than 2D approaches. This due to the multiplicity of geometrical considerations introduced by the extra dimension, especially on mixed-element meshes. Therefore, we have specifically developed a number of algorithms to handle mixed-element meshes composed of convex polyhedra with convex polygonal faces. The contribution of this work concerns several areas of interest: the formulation of an improved methodology in 3D, the minimisation of computational runtime in the implementation through the maximum use of pre-processing operations, the generation of novel methods to handle complex 3D mixed-element meshes and finally the application of the method to the transport of a scalar level set. © 2012 Global-Science Press.

Three-Dimensional Tracking of Construction Resources using an On-Site Camera System

Vision trackers have been proposed as a promising alternative for tracking at large-scale, congested construction sites. They provide the location of a large number of entities in a camera view across frames. However, vision trackers provide only two-dimensional (2D) pixel coordinates, which are not adequate for construction applications. This paper proposes and validates a method that overcomes this limitation by employing stereo cameras and converting 2D pixel coordinates to three-dimensional (3D) metric coordinates. The proposed method consists of four steps: camera calibration, camera pose estimation, 2D tracking, and triangulation. Given that the method employs fixed, calibrated stereo cameras with a long baseline, appropriate algorithms are selected for each step. Once the first two steps reveal camera system parameters, the third step determines 2D pixel coordinates of entities in subsequent frames. The 2D coordinates are triangulated on the basis of the camera system parameters to obtain 3D coordinates. The methodology presented in this paper has been implemented and tested with data collected from a construction site. The results demonstrate the suitability of this method for on-site tracking purposes.

Long-term performance of cement-bentonite containment wall

The paper presents hydraulic conductivity, unconfined compression strength (UCS) and triaxial test results of an 11 year old slag-cement-bentonite (CB) cut-off wall material and identifies factors affecting their long-term performance. The laboratory tests were performed on three types of CB samples ranging from contaminated block field samples to uncontaminated laboratory cast samples. The results showed that hydraulic conductivity reduces till 3 years and UCS increases till 90 days, but there after it remains constant till 11 years of age. The mean hydraulic conductivity and UCS values of block field samples are inferior and have large variability than laboratory cured samples. Such variations are mainly because of heterogeneity caused by aggressive environment and impurities within the specimen. Consolidated undrained triaxial test found that under an effective confining pressure of less than 200 kPa, tension failure occurred since the minor principal stress dropped to zero value at failure. The research outcome is useful for understanding future liability of CB wall and improving their design. © 2009 IOS Press.

Three-dimensional distribution of Al in high-k metal gate: Impact on transistor voltage threshold

The three-dimensional spatial distribution of Al in the high-k metal gates of metal-oxide-semiconductor field-effect-transistors is measured by atom probe tomography. Chemical distribution is correlated with the transistor voltage threshold (VTH) shift generated by the introduction of a metallic Al layer in the metal gate. After a 1050 °C annealing, it is shown that a 2-Å thick Al layer completely diffuses into oxide layers, while a positive VTH shift is measured. On the contrary, for thicker Al layers, Al precipitation in the metal gate stack is observed and the VTH shift becomes negative. © 2012 American Institute of Physics.

The interaction of riblets with wall-bounded turbulence

The purpose of this thesis is to give answer to the question: why do riblets stop working for a certain size? Riblets are small surface grooves aligned in the mean direction of an overlying turbulent flow, designed specifically to reduce the friction between the flow and the surface. They were inspired by biological surfaces, like the oriented denticles in the skin of fastswimming sharks, and were the focus of a significant amount of research in the late eighties and nineties. Although it was found that the drag reduction depends on the riblet size scaled in wall units, the physical mechanisms implicated have not been completely understood up to now. It has been explained how riblets of vanishing size interact with the turbulent flow, producing a change in the drag proportional to their size, but that is not the regime of practical interest. The optimum performance is achieved for larger sizes, once that linear behavior has broken down, but before riblets begin adopting the character of regular roughness and increasing drag. This regime, which is the most relevant from a technological perspective, was precisely the less understood, so we have focused on it. Our efforts have followed three basic directions. First, we have re-assessed the available experimental data, seeking to identify common characteristics in the optimum regime across the different existing riblet geometries. This study has led to the proposal of a new length scale, the square root of the groove crosssection, to substitute the traditional peak-to-peak spacing. Scaling the riblet dimension with this length, the size of breakdown of the linear behavior becomes roughly universal. This suggests that the onset of the breakdown is related to a certain, fixed value of the cross-section of the groove. Second, we have conducted a set of direct numerical simulations of the turbulent flow over riblets, for sizes spanning the full drag reduction range. We have thus been able to reproduce the gradual transition between the different regimes. The spectral analysis of the flows has proven particularly fruitful, since it has made possible to identify spanwise rollers immediately above the riblets, which begin to appear when the riblet size is close to the optimum. This is a quite surprising feature of the flow, not because of the uniqueness of the phenomenon, which had been reported before for other types of complex and porous surfaces, but because most previous studies had focused on the detail of the flow above each riblet as a unit. Our novel approach has provided the adequate tools to capture coherent structures with an extended spanwise support, which interact with the riblets not individually, but collectively. We have also proven that those spanwise structures are responsible for the increase in drag past the viscous breakdown. Finally, we have analyzed the stability of the flow with a simplified model that connects the appearance of rollers to a Kelvin–Helmholtz-like instability, as is the case also for the flow over plant canopies and porous surfaces. In spite of the model emulating the presence of riblets only in an averaged, general fashion, it succeeds to capture the essential attributes of the breakdown, and provides a theoretical justification for the scaling with the groove cross-section.

Vortical structures on three-dimensional shock control bumps

The vortical wake structure produced by a three-dimensional shock control bump (SCB) is thought to be useful for controlling transonic buffet on airfoils. However, at present the vorticity produced is relatively weak and the production mechanism is not well understood. Using a combined experimental and computational approach, a preliminary investigation on the wake vorticity for different bump geometries has been carried out. The structure of the wake for on and off-design conditions are considered, and the effects on the downstream boundary layer demonstrated. Three main vortical structures are observed: a primary vortex pair, weak inter-bump vortices and shear flow in the lambda-shock region. The effect of pressure gradients on vortex strength is examined and it is found that spanwise pressure gradients on the front section of the bump are the most significant parameter influencing vortex strength. © 2013 by S.P. Colliss et al.

The effect of wind tunnel size on incident shock boundary layer in-teraction experiments

We examine the effects of varying the tunnel width to height ratio on the shock boundary layer interac-tion of an incident oblique shock with a turbulent boundary layer. The computational domain is a simpli-fied representation of typical wind tunnel experiments; the top wall of the tunnel is not modeled; only the flow conditions imposed by the shock are modeled on the top of the computational domain. A hy-pothesis of the expected effect of width to height ratio is presented and tested computationally. All flows are found to be three dimensional for the single shock strength range of width to height ratios considered. The effect of tunnel width is a function of the boundary layer thickness which decreases the effective width.

Transient reflectivity on vertically aligned single-wall carbon nanotubes

One-color transient reflectivity measurements are carried out on two different samples of vertically aligned single-wall carbon nanotube bundles and compared with the response recently published on unaligned bundles. The negative sign of the optical response for both samples indicates that the free electron character revealed on unaligned bundles is only due to the intertube interactions favored by the tube bending. Neither the presence of bundles nor the existence of structural defects in aligned bundles is able to induce a free-electron like behavior of the photoexcited carriers. This result is also confirmed by the presence of non-linear excitonic effects in the transient response of the aligned bundles. © 2013 Elsevier B.V.