Collaborative governance and innovation in social enterprises

While social enterprises have gained increasing policy attention as vehicles for generating innovative responses to complex social and environmental problems, surprisingly little is known about them. In particular, the social innovation produced by social enterprises (Mulgan, Tucker, Ali, & Sander, 2007) has been presumed rather than demonstrated, and remains under-investigated in the literature. While social enterprises are held to be inherently innovative as they seek to response to social needs (Nicholls, 2010), there has been conjecture that the collaborative governance arrangements typical in social enterprises may be conducive to innovation (Lumpkin, Moss, Gras, Kato, & Amezcua, In press), as members and volunteers provide a source of creative ideas and are unfettered in such thinking by responsibility to deliver organisational outcomes (Hendry, 2004). However this is complicated by the sheer array of governance arrangements which exist in social enterprises, which range from flat participatory democratic structures through to hierarchical arrangements. In continental Europe, there has been a stronger focus on democratic participation as a characteristic of Social Enterprises than, for example, the USA. In response to this gap in knowledge, a research project was undertaken to identify the population of social enterprises in Australia. The size, composition and the social innovations initiated by these enterprises has been reported elsewhere (see Barraket, 2010). The purpose of this paper is to undertake a closer examination of innovation in social enterprises – particularly how the collaborative governance of social enterprises might influence innovation. Given the pre-paradigmatic state of social entrepreneurship research (Nicholls, 2010), and the importance of drawing draw on established theories in order to advance theory (Short, Moss, & Lumpkin, 2009), a number of conceptual steps are needed in order to examine how collaborative governance might influence by social enterprises. In this paper, we commence by advancing a definition as to what a social enterprise is. In light of our focus on the potential role of collaborative governance in social innovation amongst social enterprises, we go on to consider the collaborative forms of governance prevalent in the Third Sector. Then, collaborative innovation is explored. Drawing on this information and our research data, we finally consider how collaborative governance might affect innovation amongst social enterprises.

Analysis of stream cipher based authenticated encryption schemes

Authenticated Encryption (AE) is the cryptographic process of providing simultaneous confidentiality and integrity protection to messages. This approach is more efficient than applying a two-step process of providing confidentiality for a message by encrypting the message, and in a separate pass providing integrity protection by generating a Message Authentication Code (MAC). AE using symmetric ciphers can be provided by either stream ciphers with built in authentication mechanisms or block ciphers using appropriate modes of operation. However, stream ciphers have the potential for higher performance and smaller footprint in hardware and/or software than block ciphers. This property makes stream ciphers suitable for resource constrained environments, where storage and computational power are limited. There have been several recent stream cipher proposals that claim to provide AE. These ciphers can be analysed using existing techniques that consider confidentiality or integrity separately; however currently there is no existing framework for the analysis of AE stream ciphers that analyses these two properties simultaneously. This thesis introduces a novel framework for the analysis of AE using stream cipher algorithms. This thesis analyzes the mechanisms for providing confidentiality and for providing integrity in AE algorithms using stream ciphers. There is a greater emphasis on the analysis of the integrity mechanisms, as there is little in the public literature on this, in the context of authenticated encryption. The thesis has four main contributions as follows. The first contribution is the design of a framework that can be used to classify AE stream ciphers based on three characteristics. The first classification applies Bellare and Namprempre's work on the the order in which encryption and authentication processes take place. The second classification is based on the method used for accumulating the input message (either directly or indirectly) into the into the internal states of the cipher to generate a MAC. The third classification is based on whether the sequence that is used to provide encryption and authentication is generated using a single key and initial vector, or two keys and two initial vectors. The second contribution is the application of an existing algebraic method to analyse the confidentiality algorithms of two AE stream ciphers; namely SSS and ZUC. The algebraic method is based on considering the nonlinear filter (NLF) of these ciphers as a combiner with memory. This method enables us to construct equations for the NLF that relate the (inputs, outputs and memory of the combiner) to the output keystream. We show that both of these ciphers are secure from this type of algebraic attack. We conclude that using a keydependent SBox in the NLF twice, and using two different SBoxes in the NLF of ZUC, prevents this type of algebraic attack. The third contribution is a new general matrix based model for MAC generation where the input message is injected directly into the internal state. This model describes the accumulation process when the input message is injected directly into the internal state of a nonlinear filter generator. We show that three recently proposed AE stream ciphers can be considered as instances of this model; namely SSS, NLSv2 and SOBER-128. Our model is more general than a previous investigations into direct injection. Possible forgery attacks against this model are investigated. It is shown that using a nonlinear filter in the accumulation process of the input message when either the input message or the initial states of the register is unknown prevents forgery attacks based on collisions. The last contribution is a new general matrix based model for MAC generation where the input message is injected indirectly into the internal state. This model uses the input message as a controller to accumulate a keystream sequence into an accumulation register. We show that three current AE stream ciphers can be considered as instances of this model; namely ZUC, Grain-128a and Sfinks. We establish the conditions under which the model is susceptible to forgery and side-channel attacks.

The practice of adaptation : turning fact and fiction into theatre

Adaptation of novels and other source texts into theatre has proven to be a recurring and popular form of writing through the ages. This study argues that as the theoretical discourse has moved on from outmoded notions of fidelity to original sources, the practice of adaptation is a method of re-invigorating theatre forms and inventing new ones. This practice-led research employed a tripartite methodology comprised of the writing of two play adaptations, participation by the author/researcher in their productions, and exegetical components focused on the development and deployment of analytical tools. These tools were derived from theoretical literature and a creative practice based on acquired professional artistry "learnt by doing" over a longstanding professional career as actor, director and writer. A suite of analytical tools was developed through the three phases of the first project, the adaptation of Nick Earls’ novel Perfect Skin. The tools draw on Cardwell’s "comparative analysis", which encompasses close consideration of generic context, authorial context and medium-specific context; and on Stam’s "mechanics of narrative": order, duration, frequency, the narrator and point of view. A third analytical lens was developed from an awareness of the significance of the commissioning brief and ethical considerations and obligations to the source text and its author and audience. The tripartite methodology provided an adaptation template that was applied to the writing and production of the second play Red Cap, which used factual and anecdotal sources. The second play’s exegesis (Chapter 10) analyses the effectiveness of the suite of analytical tools and the reception of the production in order to conclude the study with a workable model for use in the practice of adapting existing texts, both factual and fictional, for the theatre.

The role for police in addressing alcohol-related harm inside and outside licensed premises

Alcohol consumption is enmeshed with Australian culture (Palk, 2008) and the use and misuse of alcohol contributes to considerable health and social harms (Barbor et al., 2010; English et al., 1995; Gutjahr, Gmel, & Rehm, 2001; Palk, 2008; Steenkamp, Harrison, & Allsop, 2002). Despite shifts in the way that alcohol is consumed and how it is used, it has been reported that one-third of all alcohol consumed is done so within licensed premises (Lang, Stockwell, Rydon, & Gamble, 1992). Consequently, licensed premises are over-represented as settings in which alcohol-related harms occur. These harms, particularly those related to violence, are associated with particular licensed premises operating in the night-time economy (Briscoe & Donnelly, 2001b; Chikritzhs, Stockwell, & Masters, 1997; Homel, Tomsen, & Thommeny, 1991; Stockwell, 1997). Police have a role in not only responding to the manifestation of harms, such as crime, injuries, assaults, domestic violence, stealing and sexual offences, but they also have a role in preventing problems, and thereby reducing alcohol and other drug-related harms (Doherty & Roche, 2003). Given the extent of alcohol consumption within licensed premises and the nature and extent of the harms, as well as the lack of opportunity to influence outcomes in other settings (e.g. the home), licensed premises offer police and other stakeholders a significant opportunity to influence positively the reduction of alcoholrelated harm. This research focuses specifically on the police role in policing licensed premises. Primarily, this research aims to investigate the factors which are relevant to why and how police officers respond to alcohol-related incidents inside and outside licensed premises. It examines the attitudes and beliefs of police and assesses their knowledge, capacity and ability to effectively police licensed premises. The research methodology uses three distinct surveys. Each contributes to understanding the motivations and practice of police officers in this important area of harm reduction. Study One involved a survey of police officers within a police district (Brisbane Central District) in Queensland, Australia and used a comprehensive questionnaire involving both quantitative and qualitative techniques. A key research outcome of Study One was the finding that officers had low levels of knowledge of the strategies that are effective in addressing alcohol-related harm both inside and outside licensed premises. Paradoxically, these officers also reported extensive recent experience in dealing with alcohol issues in these locations. In addition, these officers reported that alcohol was a significant contextual factor in the majority of matters to which they responded. Officers surveyed reported that alcohol increased the difficulty of responding to situations and that licensed premises (e.g. nightclubs, licensed clubs and hotels) were the most difficult contexts to police. Those surveyed were asked to self-assess their knowledge of the Liquor Act (Qld), which is the primary legislative authority in Queensland for regulating licensed premises. Surprisingly, well over half of the officers (65%) reported ‘no’ to ‘fair’ knowledge of the Act, despite officers believing that their skill level to police such premises was in the ‘good to very good range’. In an important finding, officers reported greater skill level to police outside licensed premises than inside such premises, indicating that officers felt less capable, from a skill perspective, to operate within the confines of a licensed premise than in the environment immediately outside such premises. Another key finding was that officers reported greater levels of training in responding to situations outside and around licensed premises than to situations inside licensed premises. Officers were also asked to identify the frequency with which they employed specified regulatory enforcement and community-based strategies. Irrespective of the type of response, ‘taking no action’ or passive policing interventions were not favoured by officers. The findings identified that officers favoured taking a range of strategies (sending home, releasing into the custody of friends, etc.) in preference to arrest. In another key finding, officers generally reported their support for operational stakeholder partnership approaches to policing licensed premises. This was evidenced by the high number of officers (over 90%) reporting that there should be shared responsibility for enforcing the provisions of the Liquor Act. Importantly, those surveyed also identified the factors which constrain or prevent them from policing licensed premises. Study Two involved interviewing a small but comprehensive group (n=11) of senior managers from within the Queensland Police Service (QPS) who have responsibility for setting operational and strategic policy. The aim of this study was to examine the attitudes, perceptions and influence that senior officers (at the strategy and policy-setting level) had on the officers at the operational level. This qualitative study was carried out using a purposive sampling (Denzin & Lincoln, 2005; Guba & Lincoln, 1989), focused interview and thematic analytic approach. The interview participants were drawn from three tiers of management at district, regional as well as the whole-of-organisational level. The first key theme emerging from the study related to role, in terms of both the QPS broader organisational role, and the individual officer role with respect to the policing of licensed premises. For the QPS organisational role, participants at all three strategic levels had a high degree of congruity as to the organisations service role; that is, to enhance public safety. With respect to participants’ beliefs as to whether police officers have knowledge and understanding of their individual roles concerning licensed premises (as opposed to the QPS role), participants reported most commonly that officers had a reasonable to clear understanding of their role. Participant comments also were supportive of the view that officers operating in the research area, Brisbane Central District (BCD), had a clearer understanding of their role than police operating in other locations. The second key theme to emerge identified a disparity between the knowledge and capability of specialist police, compared with general duties police, to police licensed premises. In fact, a number of the responses to a variety of questions differentiated specialist and general police in a range of domains. One such example related to the clarity of understanding of officer role. Participants agreed that specialist police (Liquor Enforcement & Proactive Strategies [LEAPS] officers) had more clarity of understanding in terms of their role than generalist police. Participants also were strongly of the opinion that specialist police had higher skill levels to deal with issues both inside and outside licensed premises. Some participants expressed the view that general duty police undertook purely response-related activities, or alternatively, dealt with lower order matters. Conversely, it was viewed that specialist police undertook more complex tasks because of their higher levels of knowledge and skill. The third key theme to emerge concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Participant responses strongly indicated that there was a diversity of resourcing barriers that restrict police from undertaking their roles in licensed premises. Examples of such barriers were the lack of police and the low ratio of police to patrons, available officer time, and lack of organisational investment in skills and knowledge acquisition. However, some participants indicated that police resourcing in the BCD was appropriate and officers were equipped with sufficient powers (policy and legislation). Again, the issue of specialist police was raised by one participant who argued that increasing the numbers of specialist police would ameliorate the difficulties for police officers policing licensed premises. The fourth and last key theme to emerge from Study Two related to the perception of senior officers regarding the opportunity and capability of officers to leverage off external partnerships to reduce harms inside and outside licensed premises. Police working in partnership in BCD was seen as an effective harm reduction strategy and strongly supported by the participants. All participants demonstrated a high degree of knowledge as to who these partners were and could identify those government, non-government and community groups precisely. Furthermore, the majority of participants also held strong views that the partnerships were reasonably effective and worked to varying degrees depending on the nature of the partnership and issues such as resourcing. These senior officers identified better communication and coordination as factors that could potentially strengthen these partnerships. This research finding is particularly important for senior officers who have the capacity to shape the policy and strategic direction of the police service, not only in Queensland but throughout Australasia. Study Three examined the perceptions of those with links to the broader liquor industry (government, non-government and community but exclusive of police) concerning their understanding of the police role and the capacity of police to reduce alcohol-related harm inside and outside licensed premises, and their attitudes towards police. Participants (n=26) surveyed represented a range of areas including the liquor industry, business represenatives and government representatives from Queensland Fire and Rescue Service, Queensland Ambulance Service, Brisbane City Council and Queensland Health. The first key theme to emerge from Study Three related to participant understanding of the QPS organisational role, and importantly, individual officer role in policing licensed premises. In terms of participant understanding of the QPS role there was a clear understanding by the majority of participants that the police role was to act in ways consistent with the law and to otherwise engage in a range of enforcement-related activities. Participants saw such activities falling into two categories. The first category related to reactive policing, which included actions around responding to trouble in licensed premises, monitoring crowd controllers and removing trouble-makers. In the second category, proactive approaches, participants identified the following activities as consistent with that approach: early intervention with offenders, support of licensed premises operators and high visibility policing. When participants were asked about their understanding of individual officer roles in the policing of licensed premises, a range of responses were received but the consistent message that emerged was that there is a different role to be played by general duty (uniformed) police compared to specialist (LEAPS Unit) police, which reflects differences in knowledge, skill and capability. The second key theme that emerged from the data related to the external participants’ views of the knowledge and capability of specialist police, compared with general duty police, to police licensed premises. As noted in the first key theme, participants were universally of the view that the knowledge, skill and capability of police in specialist units (LEAPS Unit) was at a higher level than that of general duty police. Participants observed that these specialist officers were better trained than their colleagues in generalist areas and were therefore better able to intervene knowledgeably and authoritatively to deal with problems and issues as they emerged. Participants also reported that officers working within BCD generally had a positive attitude to their duties and had important local knowledge that they could use in the resolution of alcohol-related issues. Participants also commented on the importance of sound and effective QPS leadership, as well as the quality of the leadership in BCD. On both these measures, there was general consensus from participants, who reported positively on the importance and effectiveness of such leadership in BCD. The third key theme to emerge from Study Three concerned the identification of barriers that serve to restrict or prevent police officers from policing licensed premises. Overwhelmingly, external participants reported the lack of human resources (i.e. police officers) as the key barrier. Other resourcing limitations, such as available officer time, police computer systems, and the time taken to charge offenders, were identified as barriers. Some participants identified barriers in the liquor industry such as ‘dodgy operators’ and negative media attention as limitations. Other constraints to emerge related to government and policy barriers. These were reflected in comments about the collection by government of fees from licensees and better ‘powers’ for police to deal with offenders. The fourth and final key theme that emerged from Study Three related to the opportunities for and capability of police to leverage off external partnerships to reduce harms inside and outside licensed premises. Not surprisingly, participants had a comprehensive knowledge of a broad range of stakeholders, from a diversity of contexts, influential in addressing issues in licensed premises. Many participants reported their relationships with the police and other stakeholders as effective, productive and consistent with the objectives of partnering to reduce alcohol-related harm. On the other hand, there were those who were concerned with their relationship with other stakeholders, particularly those with a compliance function (e.g. Office of Liquor & Gaming Regulation [OLGR]). The resourcing limitations of partners and stakeholders were also raised as an important constraining factor in fulfilling the optimum relationship. Again, political issues were mentioned in terms of the impact on partnerships, with participants stating that there is at times political interference and that politicians complicate the relationships of stakeholders. There are some significant strengths with respect to the methodology of this research. The research is distinguished from previous work in that it examines these critical issues from three distinct perspectives (i.e. police officer, senior manager and external stakeholder). Other strengths relate to the strong theoretical framework that guides and informs the research. There are also some identified limitations, including the subjective nature of self-report data as well as the potential for bias by the author, which was controlled for using a range of initiatives. A further limitation concerns the potential for transferability and generalisability of the findings to other locations given the distinctive nature of the BCD. These limitations and issues of transferability are dealt with at length in the thesis. Despite a growing body of literature about contextual harms associated with alcohol, and specific research concerning police intervention in such contextual harms, there is still much to learn. While research on the subject of police engaging in alcohol-related incidents has focused on police behaviours and strategies in response to such issues, there is a paucity of research that focuses on the knowledge and understanding of officers engaged in such behaviours and practices. Given the scarcity of research dealing with the knowledge, skills and attitudes of police officers responding to harms inside and outside licensed premises, this research contributes significantly to what is a recent and growing body of research and literature in the field. The research makes a practical contribution to police agencies’ understanding of officer knowledge and police practice in ways that have the potential to shape education and training agendas, policy approaches around generalist versus specialist policing, strategic and operational strategy, as well as partnership engagements. The research also makes a theoretical contribution given that the research design is informed by the Three Circle

Robust image hash functions using higher order spectra

Robust hashing is an emerging field that can be used to hash certain data types in applications unsuitable for traditional cryptographic hashing methods. Traditional hashing functions have been used extensively for data/message integrity, data/message authentication, efficient file identification and password verification. These applications are possible because the hashing process is compressive, allowing for efficient comparisons in the hash domain but non-invertible meaning hashes can be used without revealing the original data. These techniques were developed with deterministic (non-changing) inputs such as files and passwords. For such data types a 1-bit or one character change can be significant, as a result the hashing process is sensitive to any change in the input. Unfortunately, there are certain applications where input data are not perfectly deterministic and minor changes cannot be avoided. Digital images and biometric features are two types of data where such changes exist but do not alter the meaning or appearance of the input. For such data types cryptographic hash functions cannot be usefully applied. In light of this, robust hashing has been developed as an alternative to cryptographic hashing and is designed to be robust to minor changes in the input. Although similar in name, robust hashing is fundamentally different from cryptographic hashing. Current robust hashing techniques are not based on cryptographic methods, but instead on pattern recognition techniques. Modern robust hashing algorithms consist of feature extraction followed by a randomization stage that introduces non-invertibility and compression, followed by quantization and binary encoding to produce a binary hash output. In order to preserve robustness of the extracted features, most randomization methods are linear and this is detrimental to the security aspects required of hash functions. Furthermore, the quantization and encoding stages used to binarize real-valued features requires the learning of appropriate quantization thresholds. How these thresholds are learnt has an important effect on hashing accuracy and the mere presence of such thresholds are a source of information leakage that can reduce hashing security. This dissertation outlines a systematic investigation of the quantization and encoding stages of robust hash functions. While existing literature has focused on the importance of quantization scheme, this research is the first to emphasise the importance of the quantizer training on both hashing accuracy and hashing security. The quantizer training process is presented in a statistical framework which allows a theoretical analysis of the effects of quantizer training on hashing performance. This is experimentally verified using a number of baseline robust image hashing algorithms over a large database of real world images. This dissertation also proposes a new randomization method for robust image hashing based on Higher Order Spectra (HOS) and Radon projections. The method is non-linear and this is an essential requirement for non-invertibility. The method is also designed to produce features more suited for quantization and encoding. The system can operate without the need for quantizer training, is more easily encoded and displays improved hashing performance when compared to existing robust image hashing algorithms. The dissertation also shows how the HOS method can be adapted to work with biometric features obtained from 2D and 3D face images.

Nurse-administered procedural sedation and analgesia in the cardiac catheterisation laboratory : a mixed methods study

The cardiac catheterisation laboratory (CCL) is a specialised medical radiology facility where both chronic-stable and life-threatening cardiovascular illness is evaluated and treated. Although there are many potential sources of discomfort and distress associated with procedures performed in the CCL, a general anaesthetic is not usually required. For this reason, an anaesthetist is not routinely assigned to the CCL. Instead, to manage pain, discomfort and anxiety during the procedure, nurses administer a combination of sedative and analgesic medications according to direction from the cardiologist performing the procedure. This practice is referred to as nurse-administered procedural sedation and analgesia (PSA). While anecdotal evidence suggested that nurse-administered PSA was commonly used in the CCL, it was clear from the limited information available that current nurse-led PSA administration and monitoring practices varied and that there was contention around some aspects of practice including the type of medications that were suitable to be used and the depth of sedation that could be safely induced without an anaesthetist present. The overall aim of the program of research presented in this thesis was to establish an evidence base for nurse-led sedation practices in the CCL context. A sequential mixed methods design was used over three phases. The objective of the first phase was to appraise the existing evidence for nurse-administered PSA in the CCL. Two studies were conducted. The first study was an integrative review of empirical research studies and clinical practice guidelines focused on nurse-administered PSA in the CCL as well as in other similar procedural settings. This was the first review to systematically appraise the available evidence supporting the use of nurse-administered PSA in the CCL. A major finding was that, overall, nurse-administered PSA in the CCL was generally deemed to be safe. However, it was concluded from the analysis of the studies and the guidelines that were included in the review, that the management of sedation in the CCL was impacted by a variety of contextual factors including local hospital policy, workforce constraints and cardiologists’ preferences for the type of sedation used. The second study in the first phase was conducted to identify a sedation scale that could be used to monitor level of sedation during nurse-administered PSA in the CCL. It involved a structured literature review and psychometric analysis of scale properties. However, only one scale was found that was developed specifically for the CCL, which had not undergone psychometric testing. Several weaknesses were identified in its item structure. Other sedation scales that were identified were developed for the ICU. Although these scales have demonstrated validity and reliability in the ICU, weaknesses in their item structure precluded their use in the CCL. As findings indicated that no existing sedation scale should be applied to practice in the CCL, recommendations for the development and psychometric testing of a new sedation scale were developed. The objective of the second phase of the program of research was to explore current practice. Three studies were conducted in this phase using both quantitative and qualitative research methods. The first was a qualitative explorative study of nurses’ perceptions of the issues and challenges associated with nurse-administered PSA in the CCL. Major themes emerged from analysis of the qualitative data regarding the lack of access to anaesthetists, the limitations of sedative medications, the barriers to effective patient monitoring and the impact that the increasing complexity of procedures has on patients' sedation requirements. The second study in Phase Two was a cross-sectional survey of nurse-administered PSA practice in Australian and New Zealand CCLs. This was the first study to quantify the frequency that nurse-administered PSA was used in the CCL setting and to characterise associated nursing practices. It was found that nearly all CCLs utilise nurse-administered PSA (94%). Of note, by characterising nurse-administered PSA in Australian and New Zealand CCLs, several strategies to improve practice, such as setting up protocols for patient monitoring and establishing comprehensive PSA education for CCL nurses, were identified. The third study in Phase Two was a matched case-control study of risk factors for impaired respiratory function during nurse-administered PSA in the CCL setting. Patients with acute illness were found to be nearly twice as likely to experience impaired respiratory function during nurse-administered PSA (OR=1.78; 95%CI=1.19-2.67; p=0.005). These significant findings can now be used to inform prospective studies investigating the effectiveness of interventions for impaired respiratory function during nurse-administered PSA in the CCL. The objective of the third and final phase of the program of research was to develop recommendations for practice. To achieve this objective, a synthesis of findings from the previous phases of the program of research informed a modified Delphi study, which was conducted to develop a set of clinical practice guidelines for nurse-administered PSA in the CCL. The clinical practice guidelines that were developed set current best practice standards for pre-procedural patient assessment and risk screening practices as well as the intra and post-procedural patient monitoring practices that nurses who administer PSA in the CCL should undertake in order to deliver safe, evidence-based and consistent care to the many patients who undergo procedures in this setting. In summary, the mixed methods approach that was used clearly enabled the research objectives to be comprehensively addressed in an informed sequential manner, and, as a consequence, this thesis has generated a substantial amount of new knowledge to inform and support nurse-led sedation practice in the CCL context. However, a limitation of the research to note is that the comprehensive appraisal of the evidence conducted, combined with the guideline development process, highlighted that there were numerous deficiencies in the evidence base. As such, rather than being based on high-level evidence, many of the recommendations for practice were produced by consensus. For this reason, further research is required in order to ascertain which specific practices result in the most optimal patient and health service outcomes. Therefore, along with necessary guideline implementation and evaluation projects, post-doctoral research is planned to follow up on the research gaps identified, which are planned to form part of a continuing program of research in this field.

Producing and maintaining professional identities in early childhood

This study is an inquiry into early childhood teacher professional identities. In Australia, workforce reforms in early childhood include major shifts in qualification requirements that call for a university four-year degree-qualified teacher to be employed in child care. This marks a shift in the early years workforce, where previously there was no such requirement. At the same time as these reforms to quality measures are being implemented, and requiring a substantive up skilling of the workforce, there is a growing body of evidence through recent studies that suggests these same four-year degree-qualified early childhood teachers have an aversion to working in child care. Their preferred employment option is to work in the early years of more formal schooling, not in before-school contexts. This collision of agendas warrants investigation. This inquiry is designed to investigate the site at which advocacy for higher qualification requirements meets early childhood teachers who are reluctant to choose child care as a possible career pathway. The key research question for this study is: How are early childhood teachers’ professional identities currently produced? The work of this thesis is to problematise the early childhood teacher in child care through a particular method of discourse analysis. There are two sets of data. The first was a key early childhood political document that read as a "moment of arising" (Foucault, 1984a, p. 83). It is a political document which was selected for its current influence on the early childhood field, and in particular, workforce reforms that call for four-year degree-qualified teachers to work in before-school contexts, including child care. The second data set was generated through four focus group discussions conducted with preservice early childhood teachers. The document and transcripts of the focus groups were both analysed as text, as conceptualised by Foucault (1981). Foucault’s work spans a number of years and a range of philosophical matters. This thesis draws particularly on Foucault’s writings on discourse, power/knowledge, regimes of truth and resistance. In order to consider the production of early childhood teachers’ professional identities, the study is also informed by identity theorists, who have worked on gender, performativity and investment (Davies, 2004/2006; McNay, 1992; Osgood, 2012; Walkerdine, 1990; Weedon, 1997). The ways in which discourses intersect, compete and collide produce the subject (Foucault, 1981) and, in the case of this inquiry, there are a number of competing discourses at play, which produce the early childhood teacher. These particular theories turn particular lenses on the question of professional identities in early childhood, and such a study calls for the application of particular methodologies. Discourse analysis was used as the methodological framework, and the analysis was informed by Foucauldian concepts of discourse. While Foucault did not prescribe a form of discourse analysis as a method, his writings nonetheless provide a valuable framework for illuminating discursive practices and, in turn, how people are affected, through the shifts and distribution of power (Foucault, 1980a). The treatment used with both data sets involved redescription. For the policy document, a technique for reading document-as-text applied a genealogical approach (Foucault, 1984a). For the focus groups, the process of redescription (Rorty, 1989) involved reading talk-as-text. As a method, redescription involves describing "lots and lots of things in new ways until you have created a pattern of linguistic behaviour which will tempt the new generation to adopt it" (Rorty, 1989, p. 9). The development and application of categories (Davies, 2004/2006) built on a poststructuralist theoretical framework and the literature review informed the data analysis method of discourse analysis. Irony provided a rhetorical and playful tool (Haraway, 1991; Rorty, 1989), to look to how seemingly opposing discourses are held together. This opens a space to collapse binary thinking and consider seemingly contradictory terms in a way in which both terms are possible and both are true. Irony resists the choice of one or the other being right, and holds the opposites together in tension. The thesis concludes with proposals for new, ironic categories, which work to bring together seemingly opposing terms, located at sites in the field of early childhood where discourses compete, collide and intersect to produce and maintain early childhood teacher professional identities. The process of mapping these discourses goes some way to investigating the complexities about identities and career choices of early childhood teachers. The category of "the cost of loving" captures the collision between care/love, inherent in child care, and new discourses of investment/economics. Investment/economics has not completely replaced care/love, and these apparent opposites were not read as a binary because both are necessary and both are true (Haraway, 1991). They are held together in tension to produce early childhood teacher professional identities. The policy document under scrutiny was New Directions, released in 2007 by the then opposition ALP leader, Kevin Rudd. The claim was made strongly that the "economic prosperity" of Australia relies on investment in early childhood. The arguments to invest are compelling and the neuroscience/brain research/child development together with economic/investment discourses demand that early childhood is funding is increased. The intersection of these discourses produces professional identities of early childhood teachers as a necessary part of the country’s economy, and thus, worthy of high status. The child care sector and work in child care settings are necessary, with children and the early childhood teacher playing key roles in the economy of the nation. Through New Directions it becomes sayable (Foucault, 1972/1989) that the work the early childhood teacher performs is legitimated and valued. The children are produced as "economic units". A focus on what children are able to contribute to the future economy of the nation re-positions children and produces these "smart productive citizens", making future economic contribution. The early childhood teacher is produced through this image of a child and "the cost of loving" is emphasised. A number of these categories were produced through the readings of the document-as text and the talk-as-text. Two ironic categories were read in the analysis of the transcripts of the focus group discussions, when treated as talk-as-text data: the early childhood teacher as a "heroic victim"; and the early childhood teacher as a "glorified babysitter". This thesis raises new questions about professional identities in early childhood. These new questions might go some way to prompt re-thinking of some government policy, as well as some aspects of early childhood teacher education course design. The images of children and images of child care provide provocations to consider preservice teacher education course design. In particular, how child care, as one of the early childhood contexts, is located, conceptualised and spoken throughout the course. Consideration by course designers and teacher educators of what discourses are privileged in course content —what discourses are diminished or silenced—would go some way to reconceptualising child care within preservice teacher education and challenging dominant ways of speaking child care, and work in child care. This inquiry into early childhood teachers’ professional identities has gone some way to exploring the complexities around the early childhood teacher in child care. It is anticipated that the significance of this study will thus have immediate applicably and relevance for the Australian early childhood policy landscape. The early childhood field is in a state of rapid change, and this inquiry has examined some of the disconnects between policy and practice. Awareness of the discourses that are in play in the field will continue to allow space for conversations that challenge dominant assumptions about child care, work in child care and ways of being an early childhood teacher in child care.

Towards the retrieval of accurate OD matrices from Bluetooth data : lessons learned from 2 years of data

The Bluetooth technology is being increasingly used to track vehicles throughout their trips, within urban networks and across freeway stretches. One important opportunity offered by this type of data is the measurement of Origin-Destination patterns, emerging from the aggregation and clustering of individual trips. In order to obtain accurate estimations, however, a number of issues need to be addressed, through data filtering and correction techniques. These issues mainly stem from the use of the Bluetooth technology amongst drivers, and the physical properties of the Bluetooth sensors themselves. First, not all cars are equipped with discoverable Bluetooth devices and the Bluetooth-enabled vehicles may belong to some small socio-economic groups of users. Second, the Bluetooth datasets include data from various transport modes; such as pedestrian, bicycles, cars, taxi driver, buses and trains. Third, the Bluetooth sensors may fail to detect all of the nearby Bluetooth-enabled vehicles. As a consequence, the exact journey for some vehicles may become a latent pattern that will need to be extracted from the data. Finally, sensors that are in close proximity to each other may have overlapping detection areas, thus making the task of retrieving the correct travelled path even more challenging. The aim of this paper is twofold. We first give a comprehensive overview of the aforementioned issues. Further, we propose a methodology that can be followed, in order to cleanse, correct and aggregate Bluetooth data. We postulate that the methods introduced by this paper are the first crucial steps that need to be followed in order to compute accurate Origin-Destination matrices in urban road networks.

Improving the ability of guarantors to make a real choice : lenders' practices in taking third party guarantees

This article considers recent cases on guarantees of business loans to identify the lending practices that led the court to set aside the guarantee as against the creditor on the basis that the creditor had engaged in unconscionable conduct. It also explores the role of industry codes of practice in preventing unconscionable conduct, including whether there is a correlation between commitment to an industry code and higher standards of lending practices; whether compliance with an industry code would have produced different outcomes in the cases considered; and whether lenders need to do more than comply with an industry code to ensure their practices are fair and reasonable.

Distinguishing between mean-field, moment dynamics and stochastic descriptions of birth-death-movement processes

Mathematical descriptions of birth–death–movement processes are often calibrated to measurements from cell biology experiments to quantify tissue growth rates. Here we describe and analyze a discrete model of a birth–death-movement process applied to a typical two–dimensional cell biology experiment. We present three different descriptions of the system: (i) a standard mean–field description which neglects correlation effects and clustering; (ii) a moment dynamics description which approximately incorporates correlation and clustering effects, and; (iii) averaged data from repeated discrete simulations which directly incorporates correlation and clustering effects. Comparing these three descriptions indicates that the mean–field and moment dynamics approaches are valid only for certain parameter regimes, and that both these descriptions fail to make accurate predictions of the system for sufficiently fast birth and death rates where the effects of spatial correlations and clustering are sufficiently strong. Without any method to distinguish between the parameter regimes where these three descriptions are valid, it is possible that either the mean–field or moment dynamics model could be calibrated to experimental data under inappropriate conditions, leading to errors in parameter estimation. In this work we demonstrate that a simple measurement of agent clustering and correlation, based on coordination number data, provides an indirect measure of agent correlation and clustering effects, and can therefore be used to make a distinction between the validity of the different descriptions of the birth–death–movement process.

Ultimate flexural limit states analysis of prestressed concrete sleeper

Railway is one of the most important, reliable and widely used means of transportation, carrying freight, passengers, minerals, grains, etc. Thus, research on railway tracks is extremely important for the development of railway engineering and technologies. The safe operation of a railway track is based on the railway track structure that includes rails, fasteners, pads, sleepers, ballast, subballast and formation. Sleepers are very important components of the entire structure and may be made of timber, concrete, steel or synthetic materials. Concrete sleepers were first installed around the middle of last century and currently are installed in great numbers around the world. Consequently, the design of concrete sleepers has a direct impact on the safe operation of railways. The "permissible stress" method is currently most commonly used to design sleepers. However, the permissible stress principle does not consider the ultimate strength of materials, probabilities of actual loads, and the risks associated with failure, all of which could lead to the conclusion of cost-ineffectiveness and over design of current prestressed concrete sleepers. Recently the limit states design method, which appeared in the last century and has been already applied in the design of buildings, bridges, etc, is proposed as a better method for the design of prestressed concrete sleepers. The limit states design has significant advantages compared to the permissible stress design, such as the utilisation of the full strength of the member, and a rational analysis of the probabilities related to sleeper strength and applied loads. This research aims to apply the ultimate limit states design to the prestressed concrete sleeper, namely to obtain the load factors of both static and dynamic loads for the ultimate limit states design equations. However, the sleepers in rail tracks require different safety levels for different types of tracks, which mean the different types of tracks have different load factors of limit states design equations. Therefore, the core tasks of this research are to find the load factors of the static component and dynamic component of loads on track and the strength reduction factor of the sleeper bending strength for the ultimate limit states design equations for four main types of tracks, i.e., heavy haul, freight, medium speed passenger and high speed passenger tracks. To find those factors, the multiple samples of static loads, dynamic loads and their distributions are needed. In the four types of tracks, the heavy haul track has the measured data from Braeside Line (A heavy haul line in Central Queensland), and the distributions of both static and dynamic loads can be found from these data. The other three types of tracks have no measured data from sites and the experimental data are hardly available. In order to generate the data samples and obtain their distributions, the computer based simulations were employed and assumed the wheel-track impacts as induced by different sizes of wheel flats. A valid simulation package named DTrack was firstly employed to generate the dynamic loads for the freight and medium speed passenger tracks. However, DTrack is only valid for the tracks which carry low or medium speed vehicles. Therefore, a 3-D finite element (FE) model was then established for the wheel-track impact analysis of the high speed track. This FE model has been validated by comparing its simulation results with the DTrack simulation results, and with the results from traditional theoretical calculations based on the case of heavy haul track. Furthermore, the dynamic load data of the high speed track were obtained from the FE model and the distributions of both static and dynamic loads were extracted accordingly. All derived distributions of loads were fitted by appropriate functions. Through extrapolating those distributions, the important parameters of distributions for the static load induced sleeper bending moment and the extreme wheel-rail impact force induced sleeper dynamic bending moments and finally, the load factors, were obtained. Eventually, the load factors were obtained by the limit states design calibration based on reliability analyses with the derived distributions. After that, a sensitivity analysis was performed and the reliability of the achieved limit states design equations was confirmed. It has been found that the limit states design can be effectively applied to railway concrete sleepers. This research significantly contributes to railway engineering and the track safety area. It helps to decrease the failure and risks of track structure and accidents; better determines the load range for existing sleepers in track; better rates the strength of concrete sleepers to support bigger impact and loads on railway track; increases the reliability of the concrete sleepers and hugely saves investments on railway industries. Based on this research, many other bodies of research can be promoted in the future. Firstly, it has been found that the 3-D FE model is suitable for the study of track loadings and track structure vibrations. Secondly, the equations for serviceability and damageability limit states can be developed based on the concepts of limit states design equations of concrete sleepers obtained in this research, which are for the ultimate limit states.

A simplified approach for calculating the moments of action for linear reaction-diffusion equations

The mean action time is the mean of a probability density function that can be interpreted as a critical time, which is a finite estimate of the time taken for the transient solution of a reaction-diffusion equation to effectively reach steady state. For high-variance distributions, the mean action time under-approximates the critical time since it neglects to account for the spread about the mean. We can improve our estimate of the critical time by calculating the higher moments of the probability density function, called the moments of action, which provide additional information regarding the spread about the mean. Existing methods for calculating the nth moment of action require the solution of n nonhomogeneous boundary value problems which can be difficult and tedious to solve exactly. Here we present a simplified approach using Laplace transforms which allows us to calculate the nth moment of action without solving this family of boundary value problems and also without solving for the transient solution of the underlying reaction-diffusion problem. We demonstrate the generality of our method by calculating exact expressions for the moments of action for three problems from the biophysics literature. While the first problem we consider can be solved using existing methods, the second problem, which is readily solved using our approach, is intractable using previous techniques. The third problem illustrates how the Laplace transform approach can be used to study coupled linear reaction-diffusion equations.

A cross-discipline and collaborative approach to identifying the predictors of environmentally friendly and health protective behaviour

Background. As a society, our interaction with the environment is having a negative impact on human health. For example, an increase in car use for short trips, over walking or cycling, has contributed to an increase in obesity, diabetes and poor heart health and also contributes to pollution, which is associated with asthma and other respiratory diseases. In order to change the nature of that interaction, to be more positive and healthy, it is recommended that individuals adopt a range of environmentally friendly behaviours (such as walking for transport and reducing the use of plastics). Effective interventions aimed at increasing such behaviours will need to be evidence based and there is a need for the rapid communication of information from the point of research, into policy and practice. Further, a number of health disciplines, including psychology and public health, share a common mission to promote health and well-being. Therefore, the objective of this project is to take a cross-discipline and collaborative approach to reveal psychological mechanisms driving environmentally friendly behaviour. This objective is further divided into three broad aims, the first of which is to take a cross-discipline and collaborative approach to research. The second aim is to explore and identify the salient beliefs which most strongly predict environmentally friendly behaviour. The third aim is to build an augmented model to explain environmentally friendly behaviour. The thesis builds on the understanding that an interdisciplinary collaborative approach will facilitate the rapid transfer of knowledge to inform behaviour change interventions. Methods. The application of this approach involved two surveys which explored the psycho-social predictors of environmentally friendly behaviour. Following a qualitative pilot study, and in collaboration with an expert panel comprising academics, industry professionals and government representatives, a self-administered, Theory of Planned Behaviour (TPB) based, mail survey was distributed to a random sample of 3000 residents of Brisbane and Moreton Bay Region (Queensland, Australia). This survey explored specific beliefs including attitudes, norms, perceived control, intention and behaviour, as well as environmental altruism and green identity, in relation to walking for transport and switching off lights when not in use. Following analysis of the mail survey data and based on feedback from participants and key stakeholders, an internet survey was employed (N=451) to explore two additional behaviours, switching off appliances at the wall when not in use, and shopping with reusable bags. This work is presented as a series of interrelated publications which address each of the research aims. Presentation of Findings. Chapter five of this thesis consists of a published paper which addresses the first aim of the research and outlines the collaborative and multidisciplinary approach employed in the mail survey. The paper argued that forging alliances with those who are in a position to immediately utilise the findings of research has the potential to improve the quality and timely communication of research. Illustrating this timely communication, Chapter six comprises a report presented to Moreton Bay Regional Council (MBRC). This report addresses aim's one and two. The report contains a summary of participation in a range of environmentally friendly behaviours and identifies the beliefs which most strongly predicted walking for transport and switching off lights (from the mail survey). These salient beliefs were then recommended as targets for interventions and included: participants believing that they might save money; that their neighbours also switch off lights; that it would be inconvenient to walk for transport and that their closest friend also walks for transport. Chapter seven also addresses the second aim and presents a published conference paper in which the salient beliefs predicting the four specified behaviours (from both surveys) are identified and potential applications for intervention are discussed. Again, a range of TPB based beliefs, including descriptive normative beliefs, were predictive of environmentally friendly behaviour. This paper was also provided to MBRC, along with recommendations for applying the findings. For example, as descriptive normative beliefs were consistently correlated with environmentally friendly behaviour, local councils could engage in marketing and interventions (workshops, letter box drops, internet promotions) which encourage parents and friends to model, rather than simply encourage, environmentally friendly behaviour. The final two papers, presented in Chapters eight and nine, addresses the third aim of the project. These papers each present two behaviours together to inform a TPB based theoretical model with which to predict environmentally friendly behaviour. A generalised model is presented, which is found to predict the four specific behaviours under investigation. The role of demographics was explored across each of the behaviour specific models. It was found that some behaviour's differ by age, gender, income or education. In particular, adjusted models predicted more of the variance in walking for transport amongst younger participants and females. Adjusted models predicted more variance in switching off lights amongst those with a bachelor degree or higher and predicted more variance in switching off appliances amongst those on a higher income. Adjusted models predicted more variance in shopping with reusable bags for males, people 40 years or older, those on a higher income and those with a bachelor degree or higher. However, model structure and general predictability was relatively consistent overall. The models provide a general theoretical framework from which to better understand the motives and predictors of environmentally friendly behaviour. Conclusion. This research has provided an example of the benefits of a collaborative interdisciplinary approach. It has identified a number of salient beliefs which can be targeted for social marketing campaigns and educational initiatives; and these findings, along with recommendations, have been passed on to a local council to be used as part of their ongoing community engagement programs. Finally, the research has informed a practical model, as well as behaviour specific models, for predicting sustainable living behaviours. Such models can highlight important core constructs from which targeted interventions can be designed. Therefore, this research represents an important step in undertaking collaborative approaches to improving population health through human-environment interactions.

Measurement as legitimacy versus legitimacy of measures : Performance evaluation of social enterprise

Purpose The purpose of this paper is to review the growing emphasis on quantifiable performance measures such as social return on investment (SROI) in third sector organisations – specifically, social enterprise – through a legitimacy theory lens. It then examines what social enterprises value (i.e. consider important) in terms of performance evaluation, using a case study approach. Design/methodology/approach Case studies involving interviews, documentary analysis, and observation, of three social enterprises at different life-cycle stages with different funding structures, were constructed to consider “what measures matter” from a practitioner's perspective. Findings Findings highlight a priority on quality outcomes and impacts in primarily qualitative terms to evaluate performance. Further, there is a noticeable lack of emphasis on financial measures other than basic access to financial resources to continue pursuing social goals. Social implications The practical challenges faced by social enterprises – many of which are small to medium sized – in evaluating performance and by implication organisational legitimacy are contrasted with measures such as SROI which are resource intensive and have inherent methodological limitations. Hence, findings suggest the limited and valuable resources of social enterprises would be better allocated towards documenting the actual outcomes and impacts as a first step, in order to evaluate social and financial performance in terms appropriate to each objective, in order to demonstrate organisational legitimacy. Originality/value Findings distinguish between processes which may hold symbolic legitimacy for select stakeholder groups, and processes which hold substantive, cognitive legitimacy for stakeholders more broadly, in the under-researched context of social enterprise.

Economic burden of malignant neoplasms in Shandong province [山东省恶性肿瘤经济负担分析]

Objective: To evaluate the economic burden of malignant neoplasms in Shandong province in order to provide scientific evidence for policy-making. Methods: The main sources for this study were the data from the third sampling survey of death cause in 2006 and cancer prevalence survey in 2007 in Shandong province. The direct medical cost was calculated based on the survey data. The indirect cost due to mortality and morbidity were estimated with human capital approach based on the data of disability-adjusted life years derived from the two surveys and gross domestic product (GDP) data. The total economic burden was the sum of direct medical cost and indirect cost. The uncertainty analysis was conducted according to the methodology in global burden of disease study. Results: The total cost of cancer in Shandong province in 2006 estimated was 18 057 million Yuan RMB (95% confidence interval:16 817 － 19 393 million), which accounted for 0. 83% of the total GDP. The direct medical cost，indirect mortality cost and indirect morbidity cost accounted for 17.28%, 78.53%, and 4.20% of total economic burden of malignant neoplasms, respectively. Liver，lung and stomach cancer were the top three tumors with heavier economic burden, with accounted for more than one half (57. 83%) of the total economic burden of all cancers. The uncertainty of total burden estimated was around ± 7%, which mainly derived from the uncertainty of indirect economic burden. Conclusion: The influence of cancers on social economy is dominated by the loss of productivity, especially by the productivity loss due to premature death. Liver, lung and stomach cancer are the major cancers for disease control and prevention in Shandong province. Abstract in Chinese 目的 评价山东省恶性肿瘤经济负担,为卫生决策提供科学依据. 方法 以2006年山东省第3次死因回顾抽样凋查资料和2007年山东省恶性肿瘤现患状况抽样调查资料为基础,测算全省直接医疗成本;采用人力资本法测算死亡间接负担和伤残间接负担;参考全球疾病负担研究的方法对测算结果的不确定性进行分析. 结果 2006年山东省因恶性肿瘤导致的总经济负担为180.57亿元(95%CI=16 817～19 393),占全省GDP总量的0.83%,其中直接医疗成本占总负担的17.28%,死亡造成的间接经济负担占78.53%,伤残所致间接经济负担占4.20%;肝癌、肺癌和胃癌为山东省经济负担最重的3种恶性肿瘤,总经济负担合计占全部恶性肿瘤的57.83%;总经济负担估计结果的不确定性范围在±7%左右,主要取决于间接经济负担的不确定性. 结论 恶性肿瘤对社会经济的影响主要通过生产力的损失产生作用,并以死亡所致生产力损失为主;肝癌、肺癌和胃癌应是山东省恶性肿瘤预防控制的重点.