The generation of virtual prototypes for performance optimization

I am suspicious of tools without a purpose - tools that are not developed in response to a clearly defined problem. Of course tools without a purpose can still be useful. However the development of first generation CAD was seriously impeded because the solution came before the problem. We are in danger of repeating this mistake if we do not clarify the nature of the problem that we are trying to solve with the next generation of tools. Back in the 1980s I used to add a postscript slide at the end of CAD conference presentations and the applause would invariably turn to concern. The slide simple asked: can anyone remember what it was about design that needed aiding before we had computer aided design?

The impact of unique characteristics of projects and project-based organisations on knowledge transfer

Knowledge has been recognised as an important organisational asset that increases in value when shared; the opposite to other organisational assets which decrease in value during their exploitation. Effective knowledge transfer in organisations helps to achieve and maintain competitive advantage and ultimately organisational success. So far, the research on knowledge transfer has focused on traditional (functional) organisations. Only recently has attention been directed towards knowledge transfer in projects. Existing research on project learning has recognised the need for knowledge transfer within and across projects in project-based organisations (PBOs). Most projects can provide valuable new knowledge from unexpected actions, approaches or problems experienced during the project phases. The aim of this paper is to demonstrate the impact of unique projects characteristics on knowledge transfer in PBO. This is accomplished through review of the literature and a series of interviews with senior project practitioners. The interviews complement the findings from the literature. Knowledge transfer in projects occurs by social communication and transfer of lessons learned where project management offices (PMOs) and project managers play significant roles in enhancing knowledge transfer and communication within the PBO and across projects. They act as connectors between projects and the PBO ‘hub’. Moreover, some project management processes naturally facilitate knowledge transfer across projects. On the other hand, PBOs face communication challenges due to unique and temporary characteristics of projects. The distance between projects and the lack or weakness of formal links across projects, create communication problems that impede knowledge transfer across projects. The main contribution of this paper is to demonstrate that both social communication and explicit informational channels play important role in inter-project knowledge transfer. Interviews also revealed the important role organisational culture play in knowledge transfer in PBOs.

The digital practice ecosystem : supporting change in the construction industry through digital practice

The Digital Practice Ecosystem is a network of professional architectural, engineering and contracting firms, government agencies and professional bodies, academic, educational, and research institutions that have the shared goal of fostering changes in the construction industry through applications of digital practice. Changing the process of designing and constructing buildings using digital models will improve quality and efficiency and reduce costs allowing completion on time and on budget.

The impact of service orientation on relationship quality and future intentions

This paper examines the impact of service orientation (SO) on relationship quality, and its consequences for consumer behaviour in the travel industry. Specifically consumers' positive behavioural intentions, perceptions of switching costs, and consumer activism are examined as consequences of relationship quality (RQ). A sample of leisure and business travellers on a cross sea ferry were surveyed using a consumer intercept methodology. We find that SO has a significant and positive impact on RQ and that RQ has a positive impact on positive behavioural intentions and perceptions of switching costs. Both RQ and switching costs were found to reduce consumer activism. The implications of these findings for service managers and academics are discussed and directions forfuture research presented.

The use of technology-based self-service on assessments of consumer satisfaction and consumer commitment

Technology-based self-service (TBSS) enables consumers to complete services themselves using a technological interface. As evaluations of consumer satisfaction and commitment have typically focused on interpersonal interactions, the effect of TBSS on these is under researched . This paper explores the impact of TBSS on consumer satisfaction and on a multidimensional measure of consumer commitment.Data are collected from 241 hotel guests. The results suggest personal-service is more important for satisfaction and commitment. This has implications for marketing as the benefits of adopting TBSS are not clear. Multi-dimensional commitment provides some interesting findings and suggests the need for further research into TBSS and commitment.

E-marketing : the impact of self-service technology on consumer satisfaction and consumer commitment

Traditionally, service encounters have included an interpersonal interaction between the service provider and the customer. The introduction ofself-service technologies to the service encounter, however, is reducing and in some cases, eliminating this interpersonal interaction. Self-se rvice technology is where the customer delivers the service themselves using a technological interface. This CIM funded research programme investigates the effect of self-service technology on the service encounter, and in turn on consumer satisfaction and consumer commitment. This paper reviews the literature relevant to the current study and outlines the constructs of interest in this study. The resear ch hypotheses and conceptual model are also introduced.Finally, the agenda for future research is presented.

The impact of planning delays and other holding costs on housing affordability

Housing affordability is gaining increasing prominence in the Australian socioeconomic landscape, despite strong economic growth and prosperity. It is a major consideration for any new development. However, it is multi-dimensional, has many facets, is complex and interwoven. One factor widely held to impact housing affordability is holding costs. Although it is only one contributor, the nature and extent of its impact requires clarification. It is certainly more multifarious than simple calculation of the interest or opportunity cost of land holding. For example, preliminary analysis suggests that even small shifts in the regulatory assessment period can significantly affect housing affordability. Other costs associated with “holding” also impact housing affordability, however these costs cannot always be easily identified. Nevertheless it can be said that ultimately the real impact is felt by those whom can least afford it - new home buyers whom can be relatively easily pushed into the realms of un-affordability.

The effect of alternate supply of shielding gases in austenite stainless steel GTA welding

Welding system has now been concentrated on the development of new process to achieve cost savings, higher productivity and better quality in manufacturing industry. Discrete alternate supply of shielding gas is a new technology that alternately supplies the different kinds of shielding gases in weld zone. As the newdevelopedmethods compared to the previous generalwelding with a mixing supply of shielding gas, it cannot only increase thewelding quality, but also reduce the energy by 20% and the emission rate of fume. As a result, under thesamewelding conditions,comparedwith thewelding by supplying pure argon, argon + 67% helium mixture by conventional method and thewelding by supplying alternately pure argon and pure helium by alternate method showed the increased welding speed. Also, the alternate method showed the same welding speed with argon + 67% helium mixture without largely deteriorating of weld penetration. The alternate method with argon and helium compared with the conventional methods of pure argon and argon + 67% helium mixture produced the lowest degree of welding distortion.

Radiobiological model comparison of 3D conformal radiotherapy and IMRT plans for the treatment of prostate cancer

The main aim of radiotherapy is to deliver a dose of radiation that is high enough to destroy the tumour cells while at the same time minimising the damage to normal healthy tissues. Clinically, this has been achieved by assigning a prescription dose to the tumour volume and a set of dose constraints on critical structures. Once an optimal treatment plan has been achieved the dosimetry is assessed using the physical parameters of dose and volume. There has been an interest in using radiobiological parameters to evaluate and predict the outcome of a treatment plan in terms of both a tumour control probability (TCP) and a normal tissue complication probability (NTCP). In this study, simple radiobiological models that are available in a commercial treatment planning system were used to compare three dimensional conformal radiotherapy treatments (3D-CRT) and intensity modulated radiotherapy (IMRT) treatments of the prostate. Initially both 3D-CRT and IMRT were planned for 2 Gy/fraction to a total dose of 60 Gy to the prostate. The sensitivity of the TCP and the NTCP to both conventional dose escalation and hypo-fractionation was investigated. The biological responses were calculated using the Källman S-model. The complication free tumour control probability (P+) is generated from the combined NTCP and TCP response values. It has been suggested that the alpha/beta ratio for prostate carcinoma cells may be lower than for most other tumour cell types. The effect of this on the modelled biological response for the different fractionation schedules was also investigated.

The effect of consumer risk perceptions and information search on willingness to buy GM food products: A cross cultural analysis

This paper seeks to address the widespread call in the literature for the cross-cultural examination ( and validation) of accepted concepts within consumer behaviour, such as consumer risk perceptions and information search. The findings of the study provide support for a number of accepted relationships, whilst identifying distinct cross cultural differences in external information search and willingness to buy genetically modified (GM) food products by consumers.

Tensions, transisitions and triumphs : examining the transitional experience of fashion students between school and university

Joining any new community involves transition and adaptation. Just as we learn to adapt to different cultures when we choose to live abroad, so students learn the language and culture of an academic community in order to succeed within that environment. At the same time however, students bring with them individual learning styles and expectations, influenced by their prior experiences of learning and of life more generally. Some have excelled at school; others have come to fashion seeking something in which to excel for the first time. Commencing a degree in fashion design brings students into contact with peers and lecturers who share their passion, providing them with a community of practice which can be both supportive and at the same time intimidating.----- In Queensland where university level study in fashion is such a new phenomenon, few applicants have any depth of training in design when they apply to study fashion. Unlike disciplines such as Dance or Visual Art, where lecturers can expect a good level of skill upon entry to a degree program, we have to look for the potential evidenced in an applicant’s portfolio, much of which is untutored work that they have generated themselves in preparation for application. This means that many first year fashion students at QUT whilst very passionate about the idea of fashion design are often very naïve about the practice of fashion design, with limited knowledge of the history or cultural context of fashion and few of the technical skills needed to translate their ideas into three dimensional products.----- For teachers engaging with first year students in the design studios, it is critical to be cognizant of this mix of different experiences, expectations and emotions in order to design curricula and assessment that stretch and engage students without unduly increasing their sense of frustration and anxiety. This paper examines a first year project designed to provide an introduction to design process and to learning within a creative discipline. The lessons learnt provide a valuable and transferable resource for lecturers in a variety of art and design disciplines.

A natural model for architecture : the nature of the evolutionary model 1995

John Frazer's architectural work is inspired by living and generative processes. Both evolutionary and revolutionary, it explores informatin ecologies and the dynamics of the spaces between objects. Fuelled by an interest in the cybernetic work of Gordon Pask and Norbert Wiener, and the possibilities of the computer and the "new science" it has facilitated, Frazer and his team of collaborators have conducted a series of experiments that utilize genetic algorithms, cellular automata, emergent behaviour, complexity and feedback loops to create a truly dynamic architecture. Frazer studied at the Architectural Association (AA) in London from 1963 to 1969, and later became unit master of Diploma Unit 11 there. He was subsequently Director of Computer-Aided Design at the University of Ulter - a post he held while writing An Evolutionary Architecture in 1995 - and a lecturer at the University of Cambridge. In 1983 he co-founded Autographics Software Ltd, which pioneered microprocessor graphics. Frazer was awarded a person chair at the University of Ulster in 1984. In Frazer's hands, architecture becomes machine-readable, formally open-ended and responsive. His work as computer consultant to Cedric Price's Generator Project of 1976 (see P84)led to the development of a series of tools and processes; these have resulted in projects such as the Calbuild Kit (1985) and the Universal Constructor (1990). These subsequent computer-orientated architectural machines are makers of architectural form beyond the full control of the architect-programmer. Frazer makes much reference to the multi-celled relationships found in nature, and their ongoing morphosis in response to continually changing contextual criteria. He defines the elements that describe his evolutionary architectural model thus: "A genetic code script, rules for the development of the code, mapping of the code to a virtual model, the nature of the environment for the development of the model and, most importantly, the criteria for selection. In setting out these parameters for designing evolutionary architectures, Frazer goes beyond the usual notions of architectural beauty and aesthetics. Nevertheless his work is not without an aesthetic: some pieces are a frenzy of mad wire, while others have a modularity that is reminiscent of biological form. Algorithms form the basis of Frazer's designs. These algorithms determine a variety of formal results dependent on the nature of the information they are given. His work, therefore, is always dynamic, always evolving and always different. Designing with algorithms is also critical to other architects featured in this book, such as Marcos Novak (see p150). Frazer has made an unparalleled contribution to defining architectural possibilities for the twenty-first century, and remains an inspiration to architects seeking to create responsive environments. Architects were initially slow to pick up on the opportunities that the computer provides. These opportunities are both representational and spatial: computers can help architects draw buildings and, more importantly, they can help architects create varied spaces, both virtual and actual. Frazer's work was groundbreaking in this respect, and well before its time.

Story Circle : Digital Storytelling Around the World

Story Circle is the first collection ever devoted to a comprehensive international study of the digital storytelling movement. Exploring subjects of central importance on the emergent and ever-shifting digital landscape-consumer-generated content, memory grids, the digital storytelling youth movement, and micro-documentary- Story Circle pinpoints who is telling what stories, where, on what terms, and what they look and sound like.