East African Freshwater Fisheries Research Organization Annual Report 1972

Feeding habits of many animals have been used widely in animal classifications. This is so, because the type of diet an organism requires demands structural specialisation which will utilise the available resource. Many animals may however have many structural modifications to enable them to be described as omnivourous or generalised feeders such as H. empodisma and H. riponianus (GREENWOOD 1960) which may show varying degrees of structural and adaptational intermediacy between two trophic groups. Generally, however, the diet of many animals including fish changes as the animal grow larger. The change in structural modifications is usually correlated with changes in the diet. In fishes the change may involve change from tricuspid to biscuspid and finally to unicuspid type of teeth. The degree of modification in the structure depends on the diet, thus Haplochromis that feeds on soft tissues of snails only requires modifications in oral dentition while Haplochromis that feeds on both soft tissues and shells of snails require modification in the lower pharyngeal bone for grinding purposes. Other modifications connected with food utilisation may be located in the alimentary canal. (I) The fish species that are commercially exploited are Protopterus aethiopicus, Clarias mossambicus, Tilapia esculenta, Tilapia amphimelas and Tilapia hybrids. The other fish species present in the lake but not commercially exploited are: Gnathonemus sp. Alestes sp. Labeo sp., Barbus paludinoses, Barbus jacksoni, Barbus lineomaculatus, Barbus regersi, Leptogrlanis sp., Schilbe sp., Haplochromis spp. and Hemihaplochromis sp. (2) Protopterus sp. and Clarias sp. are mostly caught with hooks on long lines. There has been a steady increase in number of hooks on the lake. Since the stocks of Protopterus and C/arias in the lake have a limit, we should control the number of hooks used by each of the fishermen in order to avoid overharvesting. (3) All the previous studies on Lake Kitangiri fisheries suggested the use of gill nets with mesh size greater than 88.9 mm in order to avoid the capture of immature Ti/apia spp. But if the fishermen are to obtain economic gains from the fishery, the optimum mesh size for use is 88.9 -101.6 mm. (4) The gillnet is a passive gear with very beneficial selective characteristics. Unfortunately the drive-in fishery which exists on Lake Kitangiri more or less destroys the gillnet selectivity characteristics. It is therefore recommended that the beating of water with poles be discouraged and stopped. (5) There is need for provision of stable fishing canoes to replace the unstable bottle palm dug-out canoes which are currently being used and which are very risky to operate. (6) The fish processing facilities on Lake Kitangiri are still inadequate. Most of the fish is sun dried, Since sun drying is very difficult during the rainy season, most fishermen carry out intensive fishing during the dry season, Concentrating most of the fishing effort in anyone season instead of spreading evenly this effort over the whole year could damage the age structure of the exploitable stocks. (7) There are considerable fluctuations in the volume of water of the lake. The feasibility of regulating the water loss through the effluent Sibiti river should be investigated by the Water Development Department. (8) Damming the Sibiti river is an expensive undertaking and therefore, the Rural Development Bank of Tanzania should be asked to assess the economic feasibility of such a project.

Water quality parameters of coastal shrimp farms from southwest and southeast regions of Bangladesh

The impacts of shrimp farming on water quality and effluent loading of shrimp farms in southwest (Khulna) and southeast (Cox's Bazar) regions of Bangladesh was investigated during March-August and August-October season, respectively. Water salinity fluctuated from 3.0 to 15.0 ppt in the southwest, whereas it was between 2.5 to 20.0 ppt. in southeast region. Total ammonia nitrogen as recorded in most farms of Cox's Bazar region was higher (0. 1160.438 mg/L) than the recommended level of shrimp farming. Mean values of total ammonia nitrogen and total nitrogen at the outlet of shrimp farms were higher than those of inlet in both regions. Mean values of phosphate phosphorus and total phosphorus at outlet were lower than inlet except in harvest time of Penaeus monodon. Total suspended solids were deposited on the bottom of shrimp farms in both regions, which resulted in higher concentration in inlets than outlets in both regions.

Observation on some of the environmental parameters and feed quality of selected golda (Macrobrachium rosenbergii) farms in Bangladesh

A study was conducted to ascertain the existing farm water, effluent and feed quality of selected giant freshwater prawn farms from major prawn farming areas (Bagerhat Sadar, Noakhali Sadar and Mymensingh) of Bangladesh during July to November 2005. Water quality parameters such as the mean values of dissolved oxygen, alkalinity, nitrite-nitrogen, phosphate-phosphorus and ammoniacal nitrogen did not show any significantly differences among the farming areas. Whereas significant differences (p < 0.05) were observed in the mean values of temperature, secchi disc visibility, pH and chlorophyll a. However, all the water quality parameters in the farming areas were within the suitable range for prawn culture. There was no significant variation in nutrients concentration of discharged effluent among the prawn farming areas. All of the nutrients measured in effluent water were within the acceptable range and did not seem to pose a direct threat to the recipient environment. The analysed crude protein contents of commercial CP, Quality and Saudi-Bangla prawn feeds were 31.84%, 27.21% and 28.97%, respectively, whereas all analysed farm made feeds were less than 25%. The other nutrients of prawn feeds varied largely with the source of feeds and ingredients used to prepare feed. The annual yield of prawn varied from 320.4 to 512.6 kg/ha (mean 412.3 kg/ha) depending on the management system.

Diversity, abundance distribution and secondary production of intertidal and subtidal benthic macrofauna of Bushehr Province with emphasis on annelida groups

The present investigation was undertaken to establish a reference situation for future use, to identify temporal and spatial composition of macrofauna and estimate some ecological indices in the sub tidal waters along the Bushehr coastal waters in Persian Gulf. Six transects were selected including Genaveh, Farakeh, Shif, Bandargah, Rostami and Asalouyeh, at each transect 3 station were sampled in depths of zero, 5 and 10 metres. Sampling was seasonally carried out by a VAN VEEN grab 0.0225 m2, during summer 2008 until spring 2009. Samples were wet sieved immediately using 0.5 mm mesh size sieves and sediment retained in the sieve was preserved in 4% buffered formalin solution. Macrofauna specimen were separated from the sediments using decantation and elutriation methods, enumerated and identified up to the Genus level. Environmental factors such as temperature. pH, and salinity were recorded in field using sensitive probs and refractometer (for salinity) and also sediment samples were taken for TOM and grain size analysis in all the stations. 5611 specimens belonging to 66 genera were collected during the present study. Polychaetes were dominant both in terms of genus number (31) and relative abundance (74 % of total macrofaunal abundance). The other dominant groups were Artheropoda, (16.1%), Molusca (2.8%), Echinodermata (1.29%) and others including Nematoda, Nemertina, Echiura and Turbellaria (5.8%). Thirty one Genera belong of 27 families of polychaeta, one genus and family of Subphylum Chlicerata,19 genera belong to 14 families of Crustacea, 8 genera belong to 6 families of Molusca, were indentified in the studied region. 1 family (Polygordidae) and 3 genera (Flabeligera, Pilargis and Polygordius) of Polychaeta, 1 family (Nymphonidae) and genus (Nymphon) of Chelicerata, 1 Family (Nematoplanidae) and genus (Nematoplana) of Turbellaria, were identified for the first time in Persian Gulf area. The result indicated that macrofauna organism have strong relationship with the grain size characteristics of the sediments they inhabit. The most surface deposit feeder specimens such as Prionospio and Cossura were found in zero meters depth of Genaveh, Farakeh, Bandargah, Rostami and Asalouyeh stations with sandy substratum, however the most burrowing deposit feeder and scavenger specimens such as Capitella and Petaloproctus were collected in 5 and 10 meter depths of stations with silty–clay substratum. The annual mean abundance, Shanon- weiner diversity and evenness of macrofauna were estimated1152.73 N/ m² , 2.72 and 0.792 respectively .The annual average biomass and secondary production were computed 1.797 gDW m² and 3.594 gDW m² y-1 .The average of water temperature, salinity, pH and oxygen concentration were recorded between 16.37-36.05 °C, 38-42 g/l, 7.89-8.76 and 4.23-8.23 mg/l, respectively during this study in 6 studied region. Among of investigated stations Asalouyeh adjacent of effluent canal of Gas and petrochemical industry sewage and Farakeh regions adjacent the Helleh estuary had the lowets and the highest community indices. The average of diversity and density in 5 meters depth stations with moderate of sand, silt and clay were slightly more than 2 other depths stations, it seems that 5 meters stations are made a transition habitats between 2 sandy and clay habitats, that can be used by 2 groups of surface and borrowing deposit feeders. Based on the data provided in this survey, the temperature variation, sediment texture, TOM, type habitat and manmade factors of Gas and petrochemical industries have had the most effect on the macrofauna community structure in the studied region during sampling periods.

Design and process selection for joints in flexible materials

The application of high performance textiles has grown significantly in the last 10 to 15 years. Various research groups throughout the United Kingdom, such as the Department of Trade and Industry, have identified technical textiles as a field for future development. There is little design guidance for joining of flexible materials or general property models that can be applied to theses materials. This lack is due to the large diversity of properties, structures and resulting behaviours of the materials that are classified as "Flexible Materials". This dissertation explores the issues that are involved in characterising the materials at the fibre, bulk and textile levels. Different units of measurement are used for each stage of the manufacturing process of flexible materials and this disparity creates problems when trying to make general comparisons (e.g. comparing textiles to polymer films). Thus, a possible solution to this is to create selection charts that allow designers to compare the strength of materials for a given mass per unit area. A design tool was created using the Cambridge Engineering Selector (CES) software to enable the selection of joining processes for material. The tool is effective in selecting a reduced number of viable joining processes. Through case studies it was shown that designers are required to examine the selected processes (identified by the software) in greater detail - in particular the economics and geometry of the joint - in order to identify the optimum joining process.

Guidelines for the development of environmentally acceptable coastal aquaculture

The paper presents some recommendations for the development of the environmentally acceptable coastal aquaculture such as: 1) Formulate coastal aquaculture development and management plans, 2) Formulate integrated coastal zone management plans, 3) Apply the environmental impact assessment (EIA) process to all major aquaculture proposals, 4) Select suitable sites for coastal aquaculture, 5) Improve the management of aquaculture operations, 6) Assess the capacity of the ecosystem to sustain aquaculture development with minimal ecological change, 7) Establish guidelines governing the use of mangrove wetland for coastal aquaculture, 8) Establish guidelines for the use of bioactive compounds in aquaculture, 9) Assess and evaluate the true consequences of transfers and introductions of exotic organisms, 10) Regulate discharges from land-based aquaculture through the enforcement of effluent standards, 11) Establish control measures for aquaculture products, 12) Increase public awareness of the safety aspects of consuming seafood, 13) Apply incentives and deterrents to reduce environmental degradation from aquaculture activities, and 14) Monitor for ecological change.

Seawater irrigation systems for intensive marine shrimp farming in Thailand

The aim of the seawater irrigation system (SIS) is to clean up shrimp pond effluent and provide high quality seawater for shrimp farming. The system has 3 components: water intake; treatment reservoir and discharge system. There are criteria for site selection because shrimp farmers are required to form associations so they can work closely together. The construction site must be on the coastal area outside a mangrove forest and located away from a production agricultural area. All construction sites must have undergone an environmental impact assessment, and should be located on the area listed in Thailand's Coastal Zone Management Plan. Five SIS projects, which cover a culture area of 6,500 ha with 1,300 farmers (families), were completed and operated. The Department of Fisheries has planned for another 28 projects, that will cover almost 44,000 ha of culture area.

Potential risks of contaminants with specific reference to mercury

Fresh water and fish are important to the people who live in the Lake Victoria region therefore the quality of the water and fish is of major importance (Johnson & Odada, 1996). It is well known that dirty water and spoilt fish can lead to poor health and lower standards of living, and that quality can be affected by the pollution in the environment. Even though Lake Victoria is very large, it is relatively shallow and the water remains in the lake basin for a long time (Bootsma & Hecky, 1993). There are a number of environmental issues in Lake Victoria, including water hyacinth~over-population and increased farming causing problems with the lake ecosystem. All these factors combine to keep contaminants within the lake for long time, which will lead to gradually increasing concentrations in the lake. Pollution is a term that covers a wide variety of chemicals and physical changes and their adverse effects on the environment. Here we focus on contaminants, which are unwanted chemicals introduced to the environment. Contaminants include a very wide variety of chemicals, both man-made and natural, for example, mercury, pesticides and herbicides, heavy metals, and natural plant and algae toxins. Many contaminants do not always lead to adverse effects immediately, but can gradually induce long-term problems leading to chronic illnesses and physical damage. A few contaminants have very rapid impacts resulting in immediately obvious changes such as death or injury. Sources of contaminants are varied. Contaminants can get in the lake by the way of agricultural treatment of crops near the lake, industrial effluent, intentional introduction such as fish poisoning byfishermen, natural sources such as heavy metals from particular types of rocks, and even some plants naturally release their toxins. Contaminant sources are not always found near Lake Victoria.

The potential for thermal energy recovery from wastewater treatment works in Southern England

There is potential to extract energy from wastewater in a number of ways, including: kinetic energy using micro-hydro systems, chemical energy through the incineration of sludge, biomass energy from the biogas produced after anaerobic sludge digestion, and thermal energy as heat. This paper considers the last option and asks how much heat could be recovered under UK climatic conditions and can this heat be used effectively by wastewater treatment plants to reduce their carbon footprint? Four wastewater treatment sites in southern England are investigated and the available heat that can be recovered at those sites is quantified. Issues relating to the environmental, economic and practical constraints on how energy can be realistically recovered and utilised are discussed .The results show there is a definite possibility for thermal energy recovery with potential savings at some sites of up to 35,000 tonnes of total long-cycle carbon equivalent (fossil fuel) emissions per year being achievable. The paper also shows that the financial feasibility of three options for using the heat (either for district heating, sludge drying or thermophilic heating in sludge digestion processes) is highly dependant upon the current shadow price of carbon. Without the inclusion of the cost of carbon, the financial feasibility is significantly limited. An environmental constraint for the allowable discharge temperature of effluent after heat-extraction was found to be the major limitation to the amount of energy available for recovery. The paper establishes the true potential of thermal energy recovery from wastewater in English conditions and the economic feasibility of reducing the carbon footprint of wastewater treatment operations using this approach.

Coagulation removal of melanoidins from biologically treated molasses wastewater using ferric chloride

The pigments (melanoidins) in molasses wastewater are refractory to conventional biological treatment. Ferric chloride was used as coagulant to remove color and chemical oxygen demand (COD) from molasses effluent. Using jar test procedure, main operating conditions such as pH and coagulant dosage were investigated. Under the optimum conditions, up to 86% and 96% of COD and color removal efficiencies were achieved. Residual turbidity in supernatant was less than 5 NTU and Fe3+ concentration was negligible because of effective destabilization and subsequent sedimentation. The results of high performance size exclusion chromatography (HPSEC) show that low molecular weight (MW) fraction of melanoidins is more reactive than high MW fraction and increase in the concentration of the lowest MW organic group is related to the capacity of charge neutralization. Aggregate size measurement reveals the size effect on the settleability of flocs formed, with larger flocs settling more rapidly. Charge neutralization and co-precipitation are proposed as predominant coagulation mechanism under the optimum conditions. (C) 2009 Elsevier B.V. All rights reserved.

Polishing Treatment of Molasses Wastewater with Iron Salts: the Role of Counter-ions

The effect of counter-ions on the coagulation of biologically treated molasses wastewater using iron-based coagulants was investigated. Parameters such as removals of chemical oxygen demand (COD) and color, and residual turbidity, were measured to evaluate coagulation performance. Experimental results showed that ferric chloride and ferric nitrate were more effective than ferric sulfate at optimal dosages, achieving 89 to 90% and 98 to 99% of COD and color removals, respectively, with residual turbidity of less than 5 NTU. High-performance size exclusion chromatography (HPSEC) results revealed differences in the removal of the molecular weight fraction of organic compounds using iron salts. Scanning electron microscopy (SEM) showed randomly formed coagulated flocs characterized with irregular, sheet-like shapes. Nitrate and chloride counter-ions had similar effects on coagulation performance compared to sulfate. Both FeCl3 and Fe(NO3)(3) yielded better results than Fe(SO4)(2) under underdosed and optimum dosage conditions. Coagulation efficiency was less adversely affected in the overdosed regions, however, if sulfate rather than chloride or nitrate was present. Water Environ. Res., 81, 2293 (2009).

Variables affecting melanoidins removal from molasses wastewater by coagulation/flocculation

Coagulation/flocculation process was applied in the polishing treatment of molasses wastewater on a bench-scale. Important operating variables, including coagulant type and dosage, solution pH, rapid mixing conditions as well as the type and dosage of polyeletrolytes were investigated based on the maximum removal efficiencies of chemical oxygen demand (COD) and color, residual turbidity and settling characteristics of flocs. HPSEC was utilized to evaluate the removal of molecular weight fractions of melanoidins-dominated organic compounds. Experimental results indicate that ferric chloride was the most effective among the conventional coagulants, achieving 89% COD and 98% color eliminations; while aluminum sulfate was the least effective, giving COD and color reductions of 66% and 86%, respectively. In addition to metal cations, counter-ions exert significant influence on the coagulation performance since Cl--based metal salts attained better removal efficiency than SO42--based ones at the optimal coagulant dosages. Coagulation of molasses effluent is a highly pH-dependent process, with better removal efficiency achieved at lower pH levels. Rapid mixing intensity, rather than rapid mixing time, has relatively strong influence on the settling characteristics of flocs formed. Lowering mixing intensity resulted in increasing settling rate but the accumulation of floating flocs. When used as coagulant aids, synthetic polyelectrolytes showed little effects on the improvement in organic removal. On the other hand, cationic polyacrylamide was observed to substantially enhance the settleability of flocs as compared to anionic polyacrylamide. The effects of rapid mixing conditions and polymer flocculants on the coagulation performance were discussed. (C) 2009 Elsevier B.V. All rights reserved.

Hydrolysis and coagulation behavior of polyferric sulfate and ferric sulfate

The hydrolysis behaviors of polyferric sulfate (PFS) and ferric sulfate (FS) under conditions similar to raw wastewater were investigated and the coagulation of biologically pretreated molasses wastewater using PFS and FS was evaluated by studying coagulation efficiency, zeta potential and microscopic surface morphology of flocs. Experimental results show that the hydrolysis behavior of PFS is different from that of FS on the basis of ferron assay. In the case of FS, fast-reacting Fe(III) polymers were the dominant polynuclear species while large fraction of slow-reacting iron polymers is present in PFS. Despite slightly fewer dosages of PFS required as compared to FS, there is no marked difference in the coagulation of molasses effluent between PFS and FS, especially at the optimum dosages. Both coagulants destabilize organic compounds predominantly through charge neutralization-precipitation mechanism. Hydrolysis rate of PFS in synthetic solution is appreciably different from that in raw wastewater. This may due to the effect of sulfate anion introduced as counter-ion as well as depolymerization of larger polymeric Fe(III) species by the organic ligands present in molasses effluent.

The status and causes of alien species invasion in China

Data of classification, origin, pathway and environmental impacts of invasive alien micro-organisms, invertebrates, amphibians and reptiles, fish, birds, mammals, weeds, trees, and marine organisms in terrestrial, aquatic and marine ecosystems of China, were analyzed, based on literature retrieval, field survey and consultation. Some 283 invasive alien species were recorded in China, including 19 invasive alien micro-organisms, 18 aquatic plants, 170 terrestrial plants, 25 aquatic invertebrates, 33 terrestrial invertebrates, 3 amphibians and reptiles, 10 fish, and 5 mammals. Of the invasive alien species, 55.1% originated from North and South America, 21.7% from Europe, 9.9% from Asia, 8.1% from Africa and 0.6% from Oceania. Many institutions and individuals in China lack adequate knowledge of ecological and environmental consequences caused by invasive alien species, with some ignorance of the dangerous invasion in the introduction of alien species. For instance, 50.0% of invasive alien plants were intentionally introduced as pasture, feedingstuff, ornamental plants, textile plants, medicinal plants, vegetables, or lawn plants, 25% of alien invasive animals were intentionally introduced for cultivation, ornament, or biological control, In addition, more efforts are being made in the introduction of alien species, and little attention is paid on the management of introduced alien species, which may cause their escape into natural environment and potential threats to the environment. There were also gaps in quarantine system in China. All microorganisms were unintentionally introduced, through timber, seedling, flowerpot, or soil; 76.3% of alien invasive animals invaded through commodity or transportation facility because of the failure of quarantine. Therefore, quarantine measures should be strictly implemented; and meanwhile the intentional introduction of alien species should be strictly managed and a system of risk assessment should be implemented.

Removal of dibutyl phthalate by a staged, vertical-flow constructed wetland

Two sets of small scale systems of staged, vertical-flow constructed wetlands (VFCW) were operated in a greenhouse to study the purification of dibutyl phthalate (DBP) in admeasured water. Each system consisted of two chambers in which water flowed downward in chamber I and then upward in chamber 2. The systems were intermittently fed with wastewater under a hydraulic load of 420 mm(.)d(-1). The measured influent concentrations of DBP in the experimental system were 9.84 mg(.)l(-1), while the other system was used as a control and received no DBP. Effluent concentrations of the treated system averaged 5.82 mug(.)l(-1) and were far below the Chinese DBP discharge standard of less than or equal to0.2 mg(.)l(-1). These results indicate the potential purification capacity of this new kind of constructed wetland in removing DBP from a polluted water body.