Evaluation of dental pulp repair using low level laser therapy (688 nm and 785 nm) morphologic study in capuchin monkeys

The aim of this study was to evaluate the hypothesis that low-level laser therapy (LLLT) 688 nm and 785 nm accelerate dentin barrier formation and repair process after traumatic pulp exposure. The sample consisted of 45 premolars of capuchin monkeys (Cebus apella) with pulp exposure Class V cavities. All premolars were treated with calcium hydroxide (Ca(OH)(2)), divided in groups of 15 teeth each, and analyzed on 7(th), 25(th), and 60(th) day. Group GI - only Ca(OH)(2), GIF- laser 688 nm, and GIII - laser 785 nm. Laser beam was used in single and punctual dose with the parameters: continuous, 688 nm and 785 nm wavelength, tip`s area of 0.00785 cm(2), power 50 mW, application time 20 s, dose 255 J/cm(2), energy 2 J. Teeth were capped with Ca(OH)(2), Ca(OH)(2) cement and restored with amalgam. All groups presented pulp repair. On 25(th) day the thickness of the formed dentin barrier was different between the groups GI and GII (p < 0.05) and between groups GI and GIII (p < 0.01). On 60(th) day there was difference between GI and GIII (p < 0.01). It may be concluded that, LLLT 688 nm and 785 nm accelerated dentin barrier formation and consequently pulp repair process, with best results using infrared laser 785 nm. (c) 2009 by Astro Ltd. Published exclusively by WLLEY-VCH Verlag GmbH & Co. KGaA

Chondrichthyans from the base of the Irati Formation (Early Permian, Parana Basin), Sao Paulo, Brazil

Three species of chondrichthyans are reported from conglomeratic sandstone at the base of the Lower Permian (Artinskian) Irati Formation (Parana Basin) near Rio Claro, Sao Paulo State, Brazil. The fossils include: 1) dispersed teeth of the petalodont ltapyrodus punctatus Silva Santos 1990, first described from the Permian (Artinskian) Pedra do Fogo Formation, Parnaiba Basin, Northeast Brazil; 2) a new species of tooth of the Order Orodontiformes; and 3) a new species of finspine of the Order Ctenacanthiformes. These fossils occur in an allochthonous assemblage of vertebrate remains including other Chondrichthyes, Xenacanthiformes and cladodonts, paleonisciform bony fish, and tetrapods. This discovery is a significant contribution to the sparse record of South American Chondrichthyes from the Early Permian and raises questions regarding the paleoenvironmental adaptations among these fish within Paleozoic basins of Brazil at this time. (C) 2010 International Association for Gondwana Research. Published by Elsevier B.V. All rights reserved.

Bond Strength and Etching Pattern of Adhesive Systems to Enamel: Effects of Conditioning Time and Enamel Preparation

Statement of the problem: The performance of self-etch systems on enamel is controversial and seems to be dependent on the application technique and the enamel preparation. Purpose of the Study: To examine the effects of conditioning time and enamel surface preparation on bond strength and etching pattern of adhesive systems to enamel. Materials and Methods: Ninety-six teeth were divided into 16 conditions (N = 6) in function of enamel preparation and conditioning time for bond strength test. The adhesive systems OptiBond FL (Kerr, Orange, CA, USA), OptiBond SOLO Plus (Kerr), Clearfil SE Bond (Kuraray, Osaka, Japan), and Adper Prompt L-Pop (3M ESPE, St. Paul, MN, USA) were applied on unground or ground enamel following the manufacturers` directions or doubling the conditioning time. Cylinders of Filtek Flow (0.5-mm height) were applied to each bonded enamel surface using a Tygon tube (0.7 mm in diameter; Saint-Gobain Corp., Aurora, OH, USA). After storage (24 h/37 degrees C), the specimens were subjected to shear force (0.5 mm/min). The data were treated by a three-way analysis of variance and Tukey`s test (alpha = 0.05). The failure modes of the debonded interfaces and the etching pattern of adhesives were observed using scanning electron microscopy. Results: Only the main factor ""adhesive"" was statistically significant (p < 0.001). The lowest bond strength value was observed for OptiBond FL. The most defined etching pattern was observed for 35% phosphoric acid and for Adper Prompt L-Pop. Mixed failures were observed for all adhesives, but OptiBond FL showed cohesive failures in resin predominantly. Conclusions: The increase in the conditioning time as well as the enamel pretreatment did not provide an increase in the resin-enamel bond strength values for the studied adhesives. CLINICAL SIGNIFICANCE The surface enamel preparation and the conditioning time do not affect the performance of self-etch systems to enamel. (J Esthet Restor Dent 20:322-336, 2008)

Saliva flow rate, buffer capacity, and pH of autistic individuals

The objective of the study was to evaluate saliva flow rate, buffer capacity, pH levels, and dental caries experience (DCE) in autistic individuals, comparing the results with a control group (CG). The study was performed on 25 noninstitutionalized autistic boys, divided in two groups. G1 composed of ten children, ages 3-8. G2 composed of 15 adolescents ages 9-13. The CG was composed of 25 healthy boys, randomly selected and also divided in two groups: CG3 composed of 14 children ages 4-8, and CG4 composed of 11 adolescents ages 9-14. Whole saliva was collected under slight suction, and pH and buffer capacity were determined using a digital pHmeter. Buffer capacity was measured by titration using 0.01 N HCl, and the flow rate expressed in ml/min, and the DCE was expressed by decayed, missing, and filled teeth (permanent dentition [DMFT] and primary dentition [dmft]). Data were plotted and submitted to nonparametric (Kruskal-Wallis) and parametric (Student`s t test) statistical tests with a significance level less than 0.05. When comparing G1 and CG3, groups did not differ in flow rate, pH levels, buffer capacity, or DMFT. Groups G2 and CG4 differ significantly in pH (p = 0.007) and pHi = 7.0 (p = 0.001), with lower scores for G2. In autistic individuals aged 3-8 and 9-13, medicated or not, there was no significant statistical difference in flow rate, pH, and buffer capacity. The comparison of DCE among autistic children and CG children with deciduous (dmft) and mixed/permanent decayed, missing, and filled teeth (DMFT) did not show statistical difference (p = 0.743). Data suggest that autistic individuals have neither a higher flow rate nor a better buffer capacity. Similar DCE was observed in both groups studied.

Microbiopsies of Surface Dental Enamel as a Tool to Measure Body Lead Burden

Lead (Pb) poisoning is preventable but continues to be a public health problem in several countries. Measuring Pb in the surface dental enamel (SDE) using microbiopsies is a rapid, safe, and painless procedure. There are different protocols to perform these microbiopsies, but the reliability of dental enamel lead levels (DELL) determination is dependent upon biopsy depth (BD). It is established that DELL decrease from the outermost superficial layer to the inner layer of dental enamel. The aim of this study was to determine DELL obtained by two different microbiopsy techniques on SDE termed protocol I and protocol II. Two consecutive enamel layers were removed from the same subject group (n = 138) for both protocols. Protocol I consisted of a biopsied site with a diameter of 4 mm after the application of 10 l HCl for 35 s. Protocol II involved a biopsied site of 1.6 mm diameter after application of 5 l HCl for 20 s. The results demonstrated that there were no significant differences for BD and DELL between homologous teeth using protocol I. However, there was a significant difference between DELL in the first and second layers using both protocols. Further, the BD in protocol II overestimated DELL values. In conclusion, SDE analyzed by microbiopsy is a reliable biomarker in protocol I, but the chemical method to calculate BD in protocol II appeared to be inadequate for measurement of DELL. Thus, DELL could not be compared among studies that used different methodologies for SDE microbiopsies.

Effect of Calcium Pre-rinse and Fluoride Dentifrice on Enamel and on Dental Plaque Formed In Situ

Purpose: The aim of this in situ double-blind randomised crossover study was to investigate the effect of calcium (Ca) pre-rinse on the composition of plaque and on enamel prior to the use of fluoride (F) dentifrice. Materials and Methods: During four phases (14 days each) of this study, 10 volunteers had agreed to wear dental appliances containing two healthy bovine enamel blocks. A fresh solution containing 20% weight/volume (w/v) sucrose was dripped on the enamel blocks ex vivo for 5 min three times a day. Subsequently, the appliances were replaced in the mouth, and the volunteers rinsed their mouth with 10 mL of a Ca (150 mmol/L) or a placebo rinse (1 min). In sequence, a slurry (1:3 w/v) of F (1030 ppm) or placebo dentifrice was dripped onto the blocks ex vivo for 1 min. During this time, the volunteers brushed their teeth with the respective dentifrice. The appliances were replaced in the mouth, and the volunteers rinsed their mouth with water. The plaque formed on the blocks was analysed for F and Ca. The enamel demineralisation as well as the incorporation of F on enamel was evaluated by cross-sectional microhardness and alkali-soluble F analysis, respectively. Data were tested using analysis of variance (P < 0.05). Results: The Ca pre-rinse prior to the use of the F dentifrice led to a three- and sixfold increase in the plaque F and Ca concentrations, respectively. It also did not have any additive effect on the F content on the enamel and the demineralisation of the enamel, in comparison with the use of F dentifrice alone. Conclusions: A Ca lactate rinse used prior to the F dentifrice was able to change the mineral content in the plaque, but it was unable to prevent enamel demineralisation.

Functional morphology of the gastric mills of carnivorous, omnivorous, and herbivorous land crabs

Terrestrial decapods consume a wide variety of plant and animal material. The potential adaptations of carnivorous, omnivorous, and herbivorous terrestrial crustaceans were studied by examining the functional morphology of the gastric mill. Two closely related species from each feeding preference group were examined to identify which features of the mill were due to phylogeny and which were due to adaptation. The morphology of the gastric mill matched the diet well; the gastric mills of the carnivorous species (Geograpsus grayi and Geograpsus crinipes) possessed a blunt, rounded medial tooth and flattened lateral teeth with a longitudinal grinding groove. These features make them well suited to a carnivorous diet of soft animal tissue as well as hard material, such as arthropod exoskeleton. In contrast, the mill of the herbivorous gecarcinids (Gecarcoidea natalis and Discoplax hirtipes) consisted of a medial tooth with sharp transverse ridges and lateral teeth with sharp interlocking cusps and ridges and no grinding surface. These features would efficiently shred fibrous plant material. The morphology of the mill of the omnivorous coenobitids (Coenobita perlatus and Birgus latro) was more generalized toward a mixed diet. However, the mill of B. latro was more adapted to deal with highly nutritious food items, such as nuts and heavily calcified decapods. Its mill possessed lateral teeth with extended ridges, which sat close to the calcified cardiopyloric valve to form a flattened floor. Hard items trapped in the mill would be crushed against this surface by the medial tooth.

A post-contact Aboriginal mortuary tree from southwestern Victoria, Australia

Here we document the investigation of the first Australian Aboriginal mortuary tree found since the early 20th century and the first studied by archaeologists and Aboriginal traditional owners. In 2001, a landowner discovered Aboriginal skeletal remains inside a fallen, dead tree while evaluating the tree’s potential as firewood, leading to the investigation of the site. The tree was located near Moyston, in southwestern Victoria, in traditional Djab Wurrung country and held the partial skeletons of three Aboriginal individuals—two adults and a child. Clay pipe-stem wear on several teeth belonging to the two adults indicates that these remains were broadly contemporaneous secondary placements from the early post-contact period (ca. A.D. 1835–1845). Along with five additional mortuary trees within 30 km of the Moyston tree, this practice constitutes a previously unknown traditional mortuary pattern and contributes to our understanding of the complex mortuary behavior of the Aboriginal people of southwestern Victoria.

Diet and habitat of the powerful owl (Ninox strenua) living near Melbourne

The diet of Powerful Owls (Ninox strenua) living at Christmas Hills, 35km north-east of Melbourne was examined by analysis of 686 regurgitated pellets collected over two years. An aid was also developed to help identify potential mammalian prey species based on hair and skeletal characteristics. The following features were found to be most useful in distinguishing between the three species of arboreal marsupials - Common Ringtail Possum (Pseudocheirus peregrinus), Common Brushtail Possum (Trichosurus vulpecula) and Sugar Glider (Petaurus breviceps): - Cross-sectional width of primary guard hairs. - The size and shape of the nasal, frontal, parietal and squamosal bones of the skull. - Dentition. The size and shape of the upper incisor, canine and premolar teeth. The size and shape of the lower incisor and premolar teeth. - The size of the humerus. The Sugar Glider has a much smaller humerus than that of the Common Ringtail Possum and the Common Brushtail Possum. In the Common Brushtail Possum the entepicondyle ends in a very sharp point but the Common Ringtail Possum this point is not as sharp. - The Common Ringtail Possum’s femur has a very prominent trochanter which projects further than that in the Common Brushtail Possum. The femur of the Sugar Glider is distinguished by having a very large depression between the condyle and the trochanter. - The Common Brushtail Possum’s scapula has a narrower lower blade (relative to length) than that in the Common Ringtail Possum. The scapula of the Sugar Glider is smaller in size than that of the other two possums.The pelvic girdle Of the Common Brushtail Possum has a much wider ischium than those of the Common Brushtail Possum and the Sugar Glider. The ilium of the Sugar is much narrower and smaller than that of the other two possums Mammalian prey was found in 89%, insects in 13% and birds in 10% of the pellets. Of the mammals, Common Ringtail Possums occurred most frequently in the pellets over the year. There was no seasonal difference in the frequency of occurrence of Common Ringtail Possums and Sugar Gliders in pellets. However, Common Brushtail Possums were more likely to be taken in spring than in the other seasons. More adult Common Ringtail Possums were taken as prey than were other age classes over the year, except in summer when high numbers of young were consumed by the owls. The habitat of the Powerful Owl was examined by ground surveys and spotlight surveys in sixteen sites within the Warrandyte-Kinglake Nature Conservation Link. Four categories of survey sites were chosen with the following features. Category A - Sites with a dense understorey of shrubs and small trees, as well as many old trees (>10/ha) which might be suitable for nest hollows. Category B - Sites which lacked a dense understorey of shrubs and small trees and containing few or no old trees suitable for nest hollows. Category C - Sites with a dense understorey of shrubs and small trees but containing few or no old trees suitable for nest hollows. Category D - Sites which lacked a dense understorey of shrubs and small trees but having old trees (>10/ha) which might be suitable for nest hollows. High prey densities strongly correlated with the presence of hollows at these sites. In the light of the results, management recommendations were made for the future conservation of the Powerful Owls living at Christmas Hills. The following recommendations were particularly important: 1. Cleared or semi - cleared land within the Warrandyte Kinglake Nature Conservation Link be revegetated using indigenous species of eucalypts and waffles in order to provide a contiguous native forest corridor for the movement of possums and gliders between the Yarra River Valley and the Kinglake Plateau. 2. Continued planting of Eucalyptus spp. and Acacia spp. in the forested areas of the Warrandyte-Kinglake Nature Conservation Link. 3. Continued protection of healthy living trees to provide a continuous supply of hollow trees. 4. No falling of dead standing trees for firewood collecting as these can provide nest hollows for prey species of the Powerful Owl.

Biomimetic porous titanium scaffolds for orthopaedic and dental applications

The development of artificial organs and implants for replacement of injured and diseased hard tissues such as bones, teeth and joints is highly desired in orthopedic surgery. Orthopedic prostheses have shown an enormous success in restoring the function and offering high quality of life to millions of individuals each year. Therefore, it is pertinent for an engineer to set out new approaches to restore the normal function of impaired hard tissues.

Over the last few decades, a large number of metals and applied materials have been developed with significant improvement in various properties in a wide range of medical applications. However, the traditional metallic bone implants are dense and often suffer from the problems of adverse reaction, biomechanical mismatch and lack of adequate space for new bone tissue to grow into the implant. Scientific advancements have been made to fabricate porous scaffolds that mimic the architecture and mechanical properties of natural bone. The porous structure provides necessary framework for the bone cells to grow into the pores and integrate with host tissue, known as osteointegration. The appropriate mechanical properties, in particular, the low elastic modulus mimicking that of bone may minimize or eliminate the stress-shielding problem. Another important approach is to develop biocompatible and corrosion resistant metallic materials to diminish or avoid adverse body reaction. Although numerous types of materials can be involved in this fast developing field, some of them are more widely used in medical applications. Amongst them, titanium and some of its alloys provide many advantages such as excellent biocompatibility, high strength-to-weight ratio, lower elastic modulus, and superior corrosion resistance, required for dental and orthopedic implants. Alloying elements, i.e. Zr, Nb, Ta, Sn, Mo and Si, would lead to superior improvement in properties of titanium for biomedical applications.

New processes have recently been developed to synthesize biomimetic porous titanium scaffolds for bone replacement through powder metallurgy. In particular, the space holder sintering method is capable of adjusting the pore shape, the porosity, and the pore size distribution, notably within the range of 200 to 500 m as required for osteoconductive applications. The present chapter provides a review on the characteristics of porous metal scaffolds used as bone replacement as well as fabrication processes of porous titanium (Ti) scaffolds through a space holder sintering method. Finally, surface modification of the resultant porous Ti scaffolds through a biomimetic chemical technique is reviewed, in order to ensure that the surfaces of the scaffolds fulfill the requirements for biomedical applications.

Chronic disease and impairment among Alaska native elders : the Alaska Education and Research Towards Health (EARTH) study

Background: Chronic diseases and impairments are prevalent among older Americans. However, prevalence data for Alaska Native (AN) elders are limited, with estimates usually extrapolated from national studies in which AN elders may not be well-represented. The aim of this study was to describe the prevalence of selected chronic diseases, impairments, and measured medical risk factors among a large community sample of AN elders.

Methods: Design, setting, and participants. A community-based cross-sectional study of baseline information from 656 AN elders aged 55 years or over who participated in the Alaska Education and Research Towards Health (EARTH) Study, March 2004 to August 2006. Measurements. Self-reported lifetime prevalence of 17 doctor-diagnosed chronic diseases, and point prevalence of vision, hearing, oral, and general health impairment were estimated from data collected using audio computer-assisted self-administered questionnaires. In addition, height, weight, blood pressure, fasting blood lipids, and fasting blood glucose levels were measured.

Results: The four most prevalent chronic diseases among AN elders were high blood pressure (55%), arthritis (49%), high cholesterol (42%), and adult bone fracture/break (35%). The median number of chronic diseases reported was three (inter-quartile range, 2 to 5). The prevalence of self-reported vision impairment was 15%, hearing impairment 18%, and having had all natural teeth removed 25%. Almost 50% were obese. High blood pressure (systolic ≥ 140 mm Hg and/or diastolic ≥ 90 mm Hg) was measured in 23%, high low density lipoprotein (LDL) cholesterol (≥ 130 mg/dL) in 39%, and high fasting plasma glucose (> 125 mg/dL) in 9%. Obesity was more prevalent among women than men. There were also significant regional differences in rates of obesity and high LDL cholesterol.

Conclusion: These data may be useful in public health programs and health services planning.

Toddlers and tiaras : American beauty pageants in Australia

Little Miss Perfect, otherwise known as the Supreme or High Point title pageant winner stands in line with five ‘full glitz’ runners-up. These Perfect Misses all have fake tans, false eyelashes, hairpieces, flippers (a dental plate of fake teeth), acrylic nails and a full face of stage make-up. Before the pageant they have had their legs, eyebrows and armpits waxed, many have had facials and pedicures and a few mothers have even injected their daughters with Botox. Finally, these little girls have been coached on the perfect way for a female to walk and talk and have had classes to hone their ‘talent’, which is most often dancing or singing. Displayed within a portfolio of photoshopped photographs, these Stepford children are touted as the epitome of female perfection.

Unfair punishment : when criminal record checks lead to discrimination

Applying for a job is stressful enough, but if you have a criminal record, even if it’s not relevant to the job you’re applying for, it can be a nightmare.

Employers in Australia regularly discriminate on the grounds that a person has an irrelevant criminal record and checking criminal records is on the increase. The number of criminal record checks undertaken in Victoria have risen by almost 6,000% since 1993.

It is concerning then that the few laws that prohibit discrimination on the basis of irrelevant criminal record lack real teeth.

Mohair research update 18 : the importance of the live weight of Angora goats on husbandry and production

The live weight of farm animals is strongly associated with production, profitability, management requirements and animal survival (Table 1). The mature live weight of farm animals and of goats is positively associated with their potential to grow rapidly. Live weight is directly related to the nutrient requirements of goats, irrespective of their productive state.

For Angora goats in particular, live weight is associated with mohair production and mohair fibre diameter, age at puberty, reproductive performance and ovulation rate, carcass attributes, meat production and sale value at the end of their productive life. Live weight also affects the timing of the eruption of incisor teeth.