The Iowa State Capitol Fire 1904, November 2012

The twenty-first century Iowa State Capitol contains state-of-the-art fire protection. Sprinklers and smoke detectors are located in every room and all public hallways are equipped with nearby hydrants. The Des Moines Fire Department is able to fight fires at nearly any height. However, on Monday morning, January 4, 1904, the circumstances were much different. By the beginning of 1904, the Capitol Improvement Commission had been working in the Capitol for about two years. The commissioners were in charge of decorating the public areas of the building, installing the artwork in the public areas, installing a new copper roof, re-gilding the dome, replacing windows, and connecting electrical lines throughout. Electrician H. Frazer had been working that morning in Committee Room Number Five behind the House Chamber, drilling into the walls to run electrical wires and using a candle to light his way. The investigating committee determined that Frazer had left his work area and had neglected to extinguish his candle. The initial fire alarm sounded at approximately 10 a.m. Many citizen volunteers came to help the fire department. Capitol employees and state officials also assisted in fighting the fire, including Governor Albert Cummins. The fire was finally brought under control around 6 p.m., although some newspaper accounts at the time reported that the fire continued smoldering for several days. Crampton Linley was the engineer working with the Capitol Improvement Commission. He was in the building at the time of the fire and was credited with saving the building. Linley crawled through attic areas to close doors separating wings of the Capitol, an action which smothered the flames and brought the fire under control. Sadly, Linley did not live long enough to be recognized for his heroism. The day after the fire, while examining the damage, Linley fell through the ceiling of the House Chamber and died instantly from severe head injuries. The flames had burned through the ceiling and caused much of it to collapse to the floor below, while the lower areas of the building had been damaged by smoke and water. Elmer Garnsey was the artist hired by the Capitol Improvement Commission to decorate the public areas of the building. Therefore, he seemed the logical candidate to be given the additional responsibility of redecorating the areas damaged by the fire. Garnsey had a very different vision for the decoration, which is why the House Chamber, the old Supreme Court Room, and the old Agriculture offices directly below the House Chamber have a design that is very different from the areas of the building untouched by the fire.

Group selection and kin selection: two concepts but one process.

In a recent paper, Traulsen and Nowak use a multilevel selection model to show that cooperation can be favored by group selection in finite populations [Traulsen A, Nowak M (2006) Proc Natl Acad Sci USA 103:10952-10955]. The authors challenge the view that kin selection may be an appropriate interpretation of their results and state that group selection is a distinctive process "that permeates evolutionary processes from the emergence of the first cells to eusociality and the economics of nations." In this paper, we start by addressing Traulsen and Nowak's challenge and demonstrate that all their results can be obtained by an application of kin selection theory. We then extend Traulsen and Nowak's model to life history conditions that have been previously studied. This allows us to highlight the differences and similarities between Traulsen and Nowak's model and typical kin selection models and also to broaden the scope of their results. Our retrospective analyses of Traulsen and Nowak's model illustrate that it is possible to convert group selection models to kin selection models without disturbing the mathematics describing the net effect of selection on cooperation.

A Feasibility Study on Embedded Micro-Electromechanical Sensors and Systems (MEMS) for Monitoring Highway Structures, TR-575, 2011

Micro-electromechanical systems (MEMS) provide vast improvements over existing sensing methods in the context of structural health monitoring (SHM) of highway infrastructure systems, including improved system reliability, improved longevity and enhanced system performance, improved safety against natural hazards and vibrations, and a reduction in life cycle cost in both operating and maintaining the infrastructure. Advancements in MEMS technology and wireless sensor networks provide opportunities for long-term continuous, real-time structural health monitoring of pavements and bridges at low cost within the context of sustainable infrastructure systems. The primary objective of this research was to investigate the use of MEMS in highway structures for health monitoring purposes. This study focused on investigating the use of MEMS and their potential applications in concrete through a comprehensive literature review, a vendor survey, and a laboratory study, as well as a small-scale field study. Based on the comprehensive literature review and vendor survey, the latest information available on off-the-shelf MEMS devices, as well as research prototypes, for bridge, pavement, and traffic applications were synthesized. A commercially-available wireless concrete monitoring system based on radio-frequency identification (RFID) technology and off-the-shelf temperature and humidity sensors were tested under controlled laboratory and field conditions. The test results validated the ability of the RFID wireless concrete monitoring system in accurately measuring the temperature both inside the laboratory and in the field under severe weather conditions. In consultation with the project technical advisory committee (TAC), the most relevant MEMS-based transportation infrastructure research applications to explore in the future were also highlighted and summarized.

Introduction to Homeland Security and Emergency Management for Local Officials, 2012

The purpose of the Introduction to Homeland Security and Emergency Management for Local Officials is to provide you with information regarding this system. Inside, you will learn about local and state emergency management and homeland security; the phases of homeland security and emergency management; hazards that affect the state; comprehensive planning requirements; emergency declarations; available state and federal assistance; and other important topics that will help you become more versed in homeland security and emergency management in Iowa.

Issue review : state funding for libraries.

The state appropriates funds to support library services to Iowans through the State Library, the Library Service Areas, and state aid to local libraries known as Enrich Iowa. As a result of legislation enacted in 2010, the Iowa Library Association, or ILA, convened a committee to make recommendations regarding reorganization of state-funded library operations and services. The committee's recommendations have been approved by the ILA and endorsed by the State Commission of Libraries. The recommendations described involve the reorganization of the State Library and Library Service Areas.

Issue review : state funding for preschool.

The state provides funds for preschool programming through several annual and standing appropriations. The funds are received and managed by a variety of local and state entities, including local school districts, Area Education Agencies, or AEAs, the Child Development Coordinating Council, the Department of Education, and local early childhood Iowa boards. This document also provides limited information on the federally funded Head Start Program, the largest source of preschool funding in Iowa.

Water planning law and government.

Water planning efforts typically identify problems and needs. But simply calling attention to issues is usually not enough to spur action; the end result of many well-intentioned planning efforts is a report that ends up gathering dust on a shelf. Vague recommendations like “Water conservation measures should be implemented” usually accomplish little by themselves as they don’t assign responsibility to anyone. Success is more likely when an implementation strategy — who can and should do what — is developed as part of the planning process. The more detailed and specific the implementation strategy, the greater the chance that something will actually be done. The question then becomes who has the legal authority or responsibility to do what? Are new laws and programs needed or can existing ones be used to implement the recommendations? ... This document is divided into four main parts. The first, “Carrots and Sticks” looks at two basic approaches — regulatory and non-regulatory — that can be, and are, used to carry out water policy. Both have advantages and disadvantages that need to be considered. The second, “The powers of federal, state and local governments…,” looks at the constitutional powers the federal government and state and local governments have to carry out water policy. An initial look at the U. S. Constitution might suggest the federal government’s regulatory authority over water is limited but, in fact, its powers are very substantial. States have considerable authority to do a number of things but have to be mindful of any federal efforts that might conflict with those state efforts. And local governments can only do those things the state constitution or state legislature says they can do and must conform to any requirements or limitations on those powers that are contained in the enabling acts. Parts three and four examine in more detail the main programs and agencies at the federal level as well as Iowa’s state and local levels and the roles they play in national and state water policy.

Highway/Railroad Grade Crossings Identification and Signing, HR-254, 1987

In 1982, Iowa's crossing warning identification system and signage at rail crossings were outdated, inconsistent and inadequate. Iowa's railroad system had been reduced and reorganized during the 1970's and many of the surviving railroad companies were unable to install new signs or devote staff to updating information. The preliminary engineering part of this project improved the information inventory about each crossing, provided for installation of identification tags and resulted in a comprehensive list of posts and signs eligible for replacement. The sign installation portion of this project resulted in erection of nearly 10,000 new crossbuck signs and 10,000 advance warning signs with high intensity reflectorization. In addition, new posts and multiple track signs were replaced where appropriate. Increased visibility of crossings for the motoring public has resulted from proper sign placement and use of high intensity reflectorization. The tagging has provided a consistent correct identification of crossings for accident reporting. The computer inventory of information about the crossings is now correct and provides for informed decision making to administrators of Federal and State crossing safety funds.

Risk aversion and embedding bias

In Selten (1967) ?Strategy Method,? the second mover in the game submits a complete strategy. This basic idea has been exported to nonstrategic experiments, where a participant reports a complete list of contingent decisions, one for each situation or state in a given sequence, out of which one and only one state, randomly selected, will be implemented.In general, the method raises the following concern. If S0 and S1 are two differentsequences of states, and state s is in both S0 and S1, would the participant make the same decision in state s when confronted with S0 as when confronted with S1? If not, the experimental results are suspect of suffering from an ?embedding bias.?We check for embedding biases in elicitation methods of Charles Holt and Susan Laury(Laury and Holt, 2000, and Holt and Laury, 2002), and of the present authors (Bosch-Dom?nech and Silvestre, 1999, 2002, 2006a, b) by appropriately chosen replications of the original experiments. We find no evidence of embedding bias in our work. But in Holt and Laury?s method participants tend to switch earlier to the riskier option when later pairs of lotteries are eliminated from the sequence, suggesting the presence of some embedding bias.

Hydro-Surface Preparation and Coating for Painted Structural Steel, TR-407, 1999

Cities and counties in Iowa have more than 8,890 steel bridges, most of which are painted with red lead paint. The Iowa Department of Transportation (Iowa DOT) maintains less than 35 bridges coated with red lead paint, including seven of the large border bridges over the Mississippi and Missouri Rivers. Because of the federal and state regulations for bridge painting, many governmental agencies have opted not to repaint, or otherwise maintain, lead paint coatings. Consequently, the paint condition on many of these bridges is poor, and some bridges are experiencing severe rusting of structural members. This research project was developed with two objectives: 1) to evaluate the effectiveness of preparing the structural steel surface of a bridge with high pressure water jetting instead of abrasive blasting and 2) to coat the structural steel surface with a moisture-cured polyurethane paint under different surface preparation conditions.

Laboratory Performance Evaluation of CIR-Emulsion and its Comparison Against CIR-Foam Test Results from Phase 2, TR-474, 2009

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix design process developed during the previous phase is applied for CIR-emulsion mixtures with varying emulsified asphalt contents. Dynamic modulus test, dynamic creep test, static creep test and raveling test were conducted to evaluate the short- and long-term performance of CIR-emulsion mixtures at various testing temperatures and loading conditions. A potential benefit of this research is a better understanding of CIR-emulsion material properties in comparison with those of CIR-foam material that would allow for the selection of the most appropriate CIR technology and the type and amount of the optimum stabilization material. Dynamic modulus, flow number and flow time of CIR-emulsion mixtures using CSS- 1h were generally higher than those of HFMS-2p. Flow number and flow time of CIR-emulsion using RAP materials from Story County was higher than those from Clayton County. Flow number and flow time of CIR-emulsion with 0.5% emulsified asphalt was higher than CIR-emulsion with 1.0% or 1.5%. Raveling loss of CIR-emulsion with 1.5% emulsified was significantly less than those with 0.5% and 1.0%. Test results in terms of dynamic modulus, flow number, flow time and raveling loss of CIR-foam mixtures are generally better than those of CIR-emulsion mixtures. Given the limited RAP sources used for this study, it is recommended that the CIR-emulsion mix design procedure should be validated against several RAP sources and emulsion types.

Stringless Portland Cement Concrete Paving, TR-490, 2004

This report describes results from a study evaluating the use of stringless paving using a combination of global positioning and laser technologies. CMI and Geologic Computer Systems developed this technology and successfully implemented it on construction earthmoving and grading projects. Concrete paving is a new area for considering this technology. Fred Carlson Co. agreed to test the stringless paving technology on two challenging concrete paving projects located in Washington County, Iowa. The evaluation was conducted on two paving projects in Washington County, Iowa, during the summer of 2003. The research team from Iowa State University monitored the guidance and elevation conformance to the original design. They employed a combination of physical depth checks, surface location and elevation surveys, concrete yield checks, and physical survey of the control stakes and string line elevations. A final check on profile of the pavement surface was accomplished by the use of the Iowa Department of Transportation Light Weight Surface Analyzer (LISA). Due to the speed of paving and the rapid changes in terrain, the laser technology was abandoned for this project. Total control of the guidance and elevation controls on the slip-form paver were moved from string line to global positioning systems (GPS). The evaluation was a success, and the results indicate that GPS control is feasible and approaching the desired goals of guidance and profile control with the use of three dimensional design models. Further enhancements are needed in the physical features of the slipform paver oil system controls and in the computer program for controlling elevation.

2015-16 Student Loan Repayment and Forgiveness Programs

Many loan repayment and incentive programs are available to encourage college students and graduates to enter into and continue to work in designated high-need careers. More and more Iowans are reaping the rewards of these federal, state and private programs that help reduce student loan debt while allowing them to pursue their career goals. Some programs make payments directly to the recipient’s student loan servicer to reduce the balance owed (loan repayment), while others may provide the option of an income stipend or bonus for eligible recipients who meet specified employment and other criteria. This guide provides information on many of the federal and state loan repayment and incentive programs currently available.

Introduction to Homeland Security and Emergency Management for Local Officials, 2015

The purpose of the Introduction to Homeland Security and Emergency Management for Local Officials is to provide you with information regarding this system. Inside, you will learn about local and state emergency management and homeland security; the phases of homeland security and emergency management; hazards that affect the state; comprehensive planning requirements; emergency declarations; available state and federal assistance; and other important topics that will help you become more versed in homeland security and emergency management in Iowa.

First-passage and escape problems in the Feller process

The Feller process is an one-dimensional diffusion process with linear drift and state-dependent diffusion coefficient vanishing at the origin. The process is positive definite and it is this property along with its linear character that have made Feller process a convenient candidate for the modeling of a number of phenomena ranging from single-neuron firing to volatility of financial assets. While general properties of the process have long been well known, less known are properties related to level crossing such as the first-passage and the escape problems. In this work we thoroughly address these questions.