MORM--a Petri net based model for assessing OH&S risks in industrial processes: modeling qualitative aspects.

Because of the increase in workplace automation and the diversification of industrial processes, workplaces have become more and more complex. The classical approaches used to address workplace hazard concerns, such as checklists or sequence models, are, therefore, of limited use in such complex systems. Moreover, because of the multifaceted nature of workplaces, the use of single-oriented methods, such as AEA (man oriented), FMEA (system oriented), or HAZOP (process oriented), is not satisfactory. The use of a dynamic modeling approach in order to allow multiple-oriented analyses may constitute an alternative to overcome this limitation. The qualitative modeling aspects of the MORM (man-machine occupational risk modeling) model are discussed in this article. The model, realized on an object-oriented Petri net tool (CO-OPN), has been developed to simulate and analyze industrial processes in an OH&S perspective. The industrial process is modeled as a set of interconnected subnets (state spaces), which describe its constitutive machines. Process-related factors are introduced, in an explicit way, through machine interconnections and flow properties. While man-machine interactions are modeled as triggering events for the state spaces of the machines, the CREAM cognitive behavior model is used in order to establish the relevant triggering events. In the CO-OPN formalism, the model is expressed as a set of interconnected CO-OPN objects defined over data types expressing the measure attached to the flow of entities transiting through the machines. Constraints on the measures assigned to these entities are used to determine the state changes in each machine. Interconnecting machines implies the composition of such flow and consequently the interconnection of the measure constraints. This is reflected by the construction of constraint enrichment hierarchies, which can be used for simulation and analysis optimization in a clear mathematical framework. The use of Petri nets to perform multiple-oriented analysis opens perspectives in the field of industrial risk management. It may significantly reduce the duration of the assessment process. But, most of all, it opens perspectives in the field of risk comparisons and integrated risk management. Moreover, because of the generic nature of the model and tool used, the same concepts and patterns may be used to model a wide range of systems and application fields.

Impact of a smoking ban in hospitality venues on second hand smoke exposure: a comparison of exposure assessment methods

BACKGROUND: In May 2010, Switzerland introduced a heterogeneous smoking ban in the hospitality sector. While the law leaves room for exceptions in some cantons, it is comprehensive in others. This longitudinal study uses different measurement methods to examine airborne nicotine levels in hospitality venues and the level of personal exposure of non-smoking hospitality workers before and after implementation of the law. METHODS: Personal exposure to second hand smoke (SHS) was measured by three different methods. We compared a passive sampler called MoNIC (Monitor of NICotine) badge, to salivary cotinine and nicotine concentration as well as questionnaire data. Badges allowed the number of passively smoked cigarettes to be estimated. They were placed at the venues as well as distributed to the participants for personal measurements. To assess personal exposure at work, a time-weighted average of the workplace badge measurements was calculated. RESULTS: Prior to the ban, smoke-exposed hospitality venues yielded a mean badge value of 4.48 (95%-CI: 3.7 to 5.25; n = 214) cigarette equivalents/day. At follow-up, measurements in venues that had implemented a smoking ban significantly declined to an average of 0.31 (0.17 to 0.45; n = 37) (p = 0.001). Personal badge measurements also significantly decreased from an average of 2.18 (1.31-3.05 n = 53) to 0.25 (0.13-0.36; n = 41) (p = 0.001). Spearman rank correlations between badge exposure measures and salivary measures were small to moderate (0.3 at maximum). CONCLUSIONS: Nicotine levels significantly decreased in all types of hospitality venues after implementation of the smoking ban. In-depth analyses demonstrated that a time-weighted average of the workplace badge measurements represented typical personal SHS exposure at work more reliably than personal exposure measures such as salivary cotinine and nicotine.

Poliittinen islam

Lectio praecursoria Lapin yliopisto, Rovaniemi 4.12.1999

ASPECTS OF THE SILVOPASTORAL SYSTEM CORRELATED WITH PROPERTIES OF A TYPIC QUARTZIPSAMMENT (ENTISOL) IN MATO GROSSO DO SUL, BRAZIL

In Brazil, grazing mismanagement may lead to soil and pasture degradation. To impede this process, integrated cropping systems such as silvopasture have been an effective alternative, allied with precision agriculture based on soil mapping for site-specific management. In this study, we aimed to define the soil property that best sheds light on the variability of eucalyptus and forage yield. The experiment was conducted in the 2011/12 crop year in Ribas do Rio Pardo, Mato Grosso do Sul State, Brazil. We analyzed linear and spatial correlations between eucalyptus traits and physical properties of a Typic Quartzipsamment at two depths (0.00-0.10 and 0.10-0.20 m). For that purpose, we set up a geostatistical grid for collection at 72 points. Gravimetric moisture in the 0.00-0.10 m layer is an important index of soil physical quality, showing correlation to eucalyptus circumference at breast height (CBH) in a Typic Quartzipsamment. With an increase in resistance to penetration in the soil surface layer, there is an increase in eucalyptus height and in neutral detergent fiber content in the forage crop. From a spatial point of view, the height of eucalyptus and the neutral detergent fiber of forage can be estimated by co-kriging analysis with soil resistance to penetration. Resistance to penetration values above 2.3 MPa indicated higher yielding sites.

Oral and intravenous methadone use: some clinical and pharmacokinetic aspects.

A sample of 15 patients participating in an injectable methadone trial and of 15 patients in an oral methadone maintenance treatment, who admitted injecting part or all of their methadone take-home doses, were compared to 20 patients in maintenance treatment who use methadone exclusively by mouth. The present study confirms the poorer general health, the higher levels of emotional, psychological or psychiatric problems, the higher use of illicit drugs, and the higher number of problems related to employment and support associated with the use of the intravenous mode of administration of methadone. As expected, due to the shunt of metabolism in the gut wall and of the liver first-pass effect, higher concentration to dose ratios of (R)-methadone, which is the active enantiomer, were measured in the intravenous group (23% increase). This difference reached an almost statistically significant value (P = 0.054). This raises the question whether the effect of a higher methadone dose could be unconsciously sought by some of the intravenous methadone users.

Three-dimensional aspects of fluid flows in channels. II. Effects of meniscus and thin film regimes on viscous fingers

We perform a three-dimensional study of steady state viscous fingers that develop in linear channels. By means of a three-dimensional lattice-Boltzmann scheme that mimics the full macroscopic equations of motion of the fluid momentum and order parameter, we study the effect of the thickness of the channel in two cases. First, for total displacement of the fluids in the channel thickness direction, we find that the steady state finger is effectively two-dimensional and that previous two-dimensional results can be recovered by taking into account the effect of a curved meniscus across the channel thickness as a contribution to surface stresses. Second, when a thin film develops in the channel thickness direction, the finger narrows with increasing channel aspect ratio in agreement with experimental results. The effect of the thin film renders the problem three-dimensional and results deviate from the two-dimensional prediction.

Three-dimensional aspects of fluid flows in channels. I. Meniscus and thin film regimes

We study the forced displacement of a fluid-fluid interface in a three-dimensional channel formed by two parallel solid plates. Using a lattice-Boltzmann method, we study situations in which a slip velocity arises from diffusion effects near the contact line. The difference between the slip and channel velocities determines whether the interface advances as a meniscus or a thin film of fluid is left adhered to the plates. We find that this effect is controlled by the capillary and Péclet numbers. We estimate the crossover from a meniscus to a thin film and find good agreement with numerical results. The penetration regime is examined in the steady state. We find that the occupation fraction of the advancing finger relative to the channel thickness is controlled by the capillary number and the viscosity contrast between the fluids. For high viscosity contrast, lattice-Boltzmann results agree with previous results. For zero viscosity contrast, we observe remarkably narrow fingers. The shape of the finger is found to be universal.

A systematic review of longitudinal population-based studies on the predictors of smoking cessation in adolescent and young adult smokers.

OBJECTIVE: To describe the determinants of self-initiated smoking cessation of duration of at least 6 months as identified in longitudinal population-based studies of adolescent and young adult smokers. METHODS: A systematic search of the PubMed and EMBASE databases using smoking, tobacco, cessation, quit and stop as keywords was performed. Limits included articles related to humans, in English, published between January 1984 and August 2010, and study population aged 10-29 years. A total of 4502 titles and 871 abstracts were reviewed independently by 2 and 3 reviewers, respectively. Nine articles were retained for data abstraction. Data on study location, timeframe, duration of follow-up, number of data collection points, sample size, age/grade of participants, number of quitters, smoking status at baseline, definition of cessation, covariates and analytic method were abstracted from each article. The number of studies that reported a statistically significant association between each determinant investigated and cessation were tabulated, from among all studies that assessed the determinant. RESULTS: Despite heterogeneity in methods across studies, five factors robustly predicted quitting across studies in which the factor was investigated: not having friends who smoke, not having intentions to smoke in the future, resisting peer pressure to smoke, being older at first use of cigarette and having negative beliefs about smoking. CONCLUSIONS: The literature on longitudinal predictors of cessation in adolescent and young adult smokers is not well developed. Cessation interventions for this population will remain less than optimally effective until there is a solid evidence base on which to develop interventions.

Official Positions for FRAX® clinical regarding smoking from Joint Official Positions Development Conference of the International Society for Clinical Densitometry and International Osteoporosis Foundation on FRAX®.

The worldwide prevalence of smoking has been estimated at about 50% in men, and 10% in women, with larger variations among different populations studied. Smoking has been shown to affect many organ systems resulting in severe morbidity and increased mortality. In addition, smoking has been identified as a predictor of ten-year fracture risk in men and women, largely independent of an individual's bone mineral density. This finding has eventually lead to incorporation of this risk factor into FRAX®, an algorithm that has been developed to calculate an individual's ten-year fracture risk. However, only little, or conflicting data is available on a possible association between smoking dose, duration, length of time after cessation, type of tobacco and fracture risk, limiting this risk factor's applicability in the context of FRAX®.

The Iowa Medical Smoking Cessation Program, January 15, 2009

This report by the Iowa medical Drug Utilization Review Commission is in response to a request by the General Assembly to monitor the smoking cessation benefit for Iowa medicaid members, This review is performed on an ongoing basis to ensure all the elements of the legislation are met.

Relationship between cigarette smoking and abdominal obesity

BACKGROUND: Although smokers tend to have a lower body-mass index (BMI) than non-smokers, smoking may affect body fat (BF) distribution. Some studies have assessed the association between smoking, BMI and waist circumference (WC), but, to our knowledge, no population-based studies assessed the relation between smoking and BF composition. We assessed the association between amount of cigarette smoking, BMI, WC and BF composition. METHODS: Data was analysed from a cross-sectional population-based study including 6187 Caucasians aged 32-76 and living in Switzerland. Height, weight and WC were measured. BF, expressed in percent of total body weight, was measured by electrical bioimpedance. Obesity was defined as a BMI>=30 kg/m2 and normal weight as a BMI<25 kg/m2. Abdominal obesity was defined as a WC>=102 cm for men and >=88 cm for women and normal WC as <94 cm for men and <80 cm for women. In men, excess BF was defined as %BF >=28.1, 28.7, 30.6 and 32.6 for age groups 32-44, 45-54, 55-64 and 65-76, respectively; the corresponding values for women were 35.9, 36.5, 40.5 and 44.4. Cigarette smoking was assessed using a self-reported questionnaire. RESULTS: 29.3% of men and 25.0% of women were smokers. Prevalence of obesity, abdominal obesity, and excess of BF was 16.9% and 26.6% and 14.2% in men and 15.0%, 33.0% and 27.5% in women, respectively. Smokers had lower age-adjusted mean BMI, WC and percent of BF compared to non-smokers. However, among smokers,mean age-adjusted BMI,WC and BF increased with the number of cigarettes smoked per day: among light (1-10 cig/day), moderate (11-20) and heavy smokers (>20), mean +/-SE %BF was 22.4 +/−0.3, 23.1+/−0.3 and 23.5+/−0.4 for men, and 31.9+/−0.3, 32.6+/−0.3 and 32.9+/−0.4 for women, respectively. Mean WC was 92.9+/−0.6, 94.0+/−0.5 and 96.0+/−0.6 cm for men, and 80.2+/−0.5, 81.3+/−0.5 and 83.3+/−0.7 for women, respectively. Mean BMI was 25.7+/−0.2, 26.0+/−0.2, and 26.1+/−0.2 kg/m2 for men; and 23.6+/−0.2, 24.0+/−0.2 and 24.1+/−0.3 for women, respectively. Compared with light smokers, the age-adjusted odds ratio (95% Confidence Interval) for excess of BF was 1.04 (0.58 to 1.85) formoderatesmokers and 1.06 (0.57 to 1.99) for heavy smokers in men (p-trend = 0.9), and 1.35 (0.92 to 1.99) and 2.26 (1.38 to 3.72), respectively, in women (p-trend = 0.04). Odds ratio for abdominal obesity vs. normal WC was 1.32 (0.81 to 2.15) for moderate smokers and 1.95 (1.16 to 3.27) for heavy smokers in men (p-trend < 0.01), and 1.15 (0.79 to 1.69) and 2.36 (1.41 to 3.93) in women (p-trend = 0.03). Odds ratio for obesity vs. normal weight was 1.35 (0.76 to 2.41) for moderate smokers and 1.33 (0.71 to 2.49) for heavy smokers in men (p-trend = 0.9) and 0.78 (0.45 to 1.35) and 1.44 (0.73 to 2.85), in women (p-trend = 0.08). CONCLUSIONS: WC and BF were positively and dose-dependently associated with the number of cigarettes smoked per day in women, whereas onlyWC was dose dependently and significantly associated with the amount of cigarettes smoked per day in men. This suggests that heavy smokers, especially women, are more likely to have an excess of BF and to accumulate BF in the abdomen compared to lighter smokers.