Variabilidade espacial de atributos químicos em um Argissolo sob pastagem

Studies show the importance of knowing the variability of soil attributes for a more efficient management. This work was carried out to evaluate the spatial variability of the chemical attributes of an Ultisol, cultivated with Brachiaria decumbens pasture in Alegre - ES. Soil samples were collected at a depth of 00-0.2 m, at the crossing points of a regular grid with 10 m-intervals, comprising a total of 64 points. Data were submitted to descriptive statistics, geostatistics and kriging interpolation analysis. The coefficient of variation was low for pH, high for Al and m%, and medium the other attributes. The attributes pH, P, H+Al and m% presented strong dependence, and the other moderate dependence. The attributes presented a spatial dependence structure, allowing their mapping by geostatistics techniques.

Atributos físicos de latossolo vermelho sob pousio ou cultivado com forrageiras tropicais sob pastejo

The objective was to study the physical attributes of an Oxisol under fallow or planted with tropical grasses under grazing. The experiment was conducted under the experimental design of randomized blocks in split-plot 2 x 5, being five types of use of soil (Brachiaria ruziziensis, Panicum maximum cv. Aries, Brachiaria brizantha cv. MG5, Panicum maximum cv. Mombaca and fallow) and two evaluation periods (after the first and after the second grazing), with four replications. We evaluated the characteristics of soil bulk density, total porosity, microporosity and macroporosity, after the first and second grazing, and soil resistance to penetration after the second grazing. In layer of 0.00 to 0.10 m, the macroporosity was affected by the interaction between types of use and evaluation periods, while the microporosity and total porosity were reduced and the density was increased from first to second evaluation time. In the subsurface layer (0.10-0.20 m), there were significant effect only of evaluation time, on the macroporosity, total porosity and density. The porosity were reduced, while the density increased from first to second evaluation time. No significant effects of types of use of soil on penetration resistance in all layers studied. The maintenance of an Oxisol under fallow or cultivation with tropical grasses subjected to grazing cattle causes a reduction in total porosity and increased density of surface soil layers (0 to 0.10 m) and subsurface (0.10 - 0.20 m), without promoting changes on resistance to penetration mechanics.

Atributos físicos do solo e produtividade do milho sob sistemas de manejo e adubações

No-tillage system is an efficient technique in control of soil erosion, when compared with conventional tillage, however, some studies indicate higher compaction under no-tillage, mainly in the surface layer. Strategies that increase the organic matter content, as crop rotation and organic fertilization, can be used to solve the soil compaction. The aim of this study was to evaluate the effect of soil managements (crop succession and crop rotation) and fertilization (organic, mineral and organic-mineral) in the physical properties of the soil, under no-tillage system, from 2006 to 2008. The evaluations were carried out in February 2007, after the summer corn harvest, and in September 2008, after the winter corn harvest. Crop rotation decreased the soil density and soil resistance to penetration and increased the macroporosity and total porosity. The use of organic sources of fertilization did not affect any of the physical attributes of soil. The yield of summer corn was highest in succession crop and mineral fertilization, however, in the winter, there was no difference between the soil managements and among the fertilizations.

Estimativas de parâmetros genéticos e proposição de critérios de seleção para pesos na raça Canchim

The objectives of this study were to obtain heritability and genetic, phenotypic and environmental correlation estimates for birth (B), weaning (WW), yearling (YW) and 18 - (EW) and 24 - month (TW) weights, and to propose selection criteria for body weight in Canchim cattle. The data were analyzed by the least-squares method with models that included the fixed effects of herd, year and month of birth, sex of calf and age of cow at calving, and the random effects of sire within herd. The heritability estimates obtained were equal to 0.36 0.06 (BW), 0.47 0.06 (WW), 0.53 0.07 (YW), 0.54 0.08 (EW) and 0.27 0.06 (TW). The genetic correlations were equal to 0.51 (BW and WW), 0.36 (BW and YW), 0.14 (BW and EW), 0.00 (BW and TW), 0.92 (WW and YW), 0.77 (WW and EW), 0.75 (WW and TW), 0.94 (YW and EW), 0.86 (YW and TW) and 0.85 (EW and TW). The phenotypic correlations ranged from 0.19 to 0.72, and the environmental correlations from 0.11 to 0.61. The results showed that, in general, mass selection for weight will result in genetic progress, selection for weight at any age will result in correlated changes at other ages, and EW and TW are good selection criteria for increasing weight in the Canchim breed.

Efeito da seleção quanto ao peso corporal nas características reprodutivas em linhagens de frangos de corte

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos da Seleção para Peso Pós-desmame sobre Medidas Corporais e Perímetro Escrotal de Machos Nelore de Sertãozinho (SP)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Modelo de otimização para seleção de árvores matrizes de Eucalyptus grandis

Individual data of basic density and volume of wood, pulp kappa number, soluble lignin, cost of pulping process as well as gravimetric gross yield of pulping process were used from 64 trees of Eucalyptus grandis W. Hill ex Maiden from a commercial population at Lençóis Paulista, SP. The Eucalyptus grandis's seeds were originally from a Seed Production Area (SPA) of Duratex S/A at Botucatu, SP. Obtained data were quantified considering objective of maximization no-bleaching pulp and volume and mass wood restriction, mass of residual and soluble lignin, planted area and pulping process cost. it has also been aimed a selection method for matrix trees through mathematical programming techniques. Obtained strategy maximized the economical result, selected matrix trees and followed all limits of technological and organizing productivities imposed by the company. It also aimed the production of no-bleaching pulp within the planned time.

Ganho genético por diferentes critérios de seleção em populações segregantes de soja

In breeding programs, the complexity of economically outstanding characters, most of which highly influenced by the environment, makes selection difficult. Using genetic parameters, like heritability and gain with selection, it is possible to identify superior genotypes in early generations. Therefore, the aim of the present research was to compare different selection criteria by the estimated gains and the selected progenies, determining the superior and more similar methods. Augmented block design was used with three additional checks. Twelve hundred genotypes were evaluated. The most expressive expected gains were obtained with direct selection. However, the indices have shown to be more appropriate for selecting superior progenies because of their higher total gains, distributed among all the evaluated characters. The Sum of Ranks Index allowed the highest gains in most of the situations analysed.

Seleção simultânea de caracteres em progênies de Pinus caribaea Morelet var. bahamensis

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Atributos químicos do solo e produtividade do milho afetados por corretivos e manejo do solo

A field experiment was carried out in the Lageado Experimental Farm belonging to the São Paulo State University - UNESP, Campus of Botucatu, SP, in a distrophic Nitosoil in 1997/98. The objective was to compare the effects of magnesium termophosphate; termophosphate + lime; termophosphate + phosphogypsum + sugarcane vinnace application on the chemical characteristics of the soil and on the corn (Zea mays L.) yield cultivated in no-tillage and conventional tillage systems. The Crotalaria juncea was cultivated as mulch-producing to make possible the establishment of the tillage systems. The mean modifications in the soil fertility were due to aplication of the magnesium termophosphate. The differences between the two tillage systems, related to crop productivity, were associated to the smaller N content in the corn leaf in the no-tillage system.

Determinação da distribuição de um nível de turbidito na formação Macaé no campo de Namorado através de uso de atributos sísmicos

This study was developed on the basis of petrophysics characterization, 3D seismic interpretation, and rock-wire-log integration. The results were integrated with amplitude attribute through cross plot (rock attribute x amplitude value). 3D seismic data also allowed inteipreting the top of Lagoa Feia, Macaé, and Carapebus formations, and Outeiro Member. The analyses of the maps of structures and attributes, integrated with wire-log data, suggest that Namorado turbidite level is candidate to be mapped with stratigraphic attributes like AverageTroughAmplitude, RMS velocity and Total AbsoluteAmplitude. Lagoa Feia Formation attribute maps (Dip-Azimuth and TotalEnergy) allows to interpret a low fault density at the carbonate coquina level in the Namorado field. This level is also considered one at the best seismic reflector and an important reservoir of the Campos Basin.

Espécies invasoras: Conceitos, modelose atributos

The distribution of species in ecosystems is influenced by several biotic and abiotic factors, and physical barriers operate as filters to dispersion. The ancient processes of human migration and settlement, and the recent globalization trends are the main responsible factors for the transposition of geographic barriers by organisms and species introduction in regions outside their original distribution range. In order to designate introduced species, the adopted terminology may eventually lead to a lack of operational definitions, misleading the interpretation of paradigms concerning the invasion process. According to the literature, the criteria i) biogeographic, ii) population growth, and iii) spreading in the invaded region, should be taken into account as a manner to avoid subjective interpretations. Most of the presented models are inserted in the same paradigms to explain the status of the invasion process (arrival, establishment and invasion), although each model has its own concepts. Many authors consider both characteristics of the invader species and of the invaded environments to explain species success and establishment. The use of clear concepts, well established and non subjective concepts of introduced and invading species as well as its derivatives is crucial to unify the paradigms of the invasion process.

Atributos químicos e físicos de um solo tratado com biossólido industrial e cultivado com milho

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Avaliação de interpoladores estatísticos e determinísticos na estimativa de atributos do solo em agricultura de precisão

The obtaining of the correct space distribution for attributes of the soil is relevant in the agricultural planning, in what concerns to the installation and maintenance of the cultures. The objective of that work was to compare statistical interpolation methods (ordinary krigagem) and deterministic methods (inverse square distance) in the estimate of CTC and V% in a distrophic yellow-red Latossolo. The study was accomplished in the State of Experimental Hands on of the Instituto Capixaba de Pesquisa, Assistência Técnica e Extensão Rural (INCAPER), in an irregular grading with 109 points. The data were collected in the layer of 0 - 0,20 m in the projection of the cup of the plants, in the superior part of the slope. The performance of the interpolators was obtained and compared using the criterion of the medium mistake. The observations are dependent in space until a maximum reach of 14,1 m, considering the isotropy. IDW presented larger mistake in the estimate of the data; however its difference in relation to KRIG was small for both variables.

Implantação de aterros sanitários: Comparação de métodos de seleção de áreas

Historically, the incorrect waste disposal has been related to epidemics which resulted in thousand of deaths. Despite the efforts to develop sanitary disposal methods in the 19 century, even today, uncontrolled dumps are often found in undeveloped countries. These places are responsible for environment pollution and for several diseases. The process of adequate waste disposal begins with the selection of suitable landfill areas, based on environmental characteristics. The goal of this research was to compare two methods of landfill site selection: the first one developed by IG-SMA (1999), and the other by Basílio (2001). Both methods were developed and applied in the same area - region of Campinas, São Paulo State, Brazil and this fact explains the choice for them; the comparison was made by superposing maps. Despite the same geographic area, the result was very different and few areas in common were found; IG-SMA (1999) obtained more suitable areas than Basílio (2001). This has been attributed to scale, criteria and attribute differences and, as a conclusion, Basílio (2001) was considered more restrictive than IG-SMA (1999).