919 resultados para SPRAY COATING


Relevância:

10.00% 10.00%

Publicador:

Resumo:

Human exploitation of the forest in the northwest of São Paulo State has generated enormous fragmentation of that forest. Such disturbance has reduced the populations of insects in general. This work was a survey of social wasps (Hymenoptera, Vespidae; Polistinae) in three areas in different stages of regeneration: Paulo de Faria - SP (435 ha), Pindorama - SP (128 ha) and Neves Paulista - SP (1 ha). These three areas were chosen for comparative purposes. To capture the wasps, it was used: active collecting with attractant liquid (solution of water, salt and sugar) with the aid of a dorsal spray bag. During the period from July to December 2006, 414 social wasps were collected in Paulo de Faria, constituting seven species belonging to four genera; 111 social wasps were collected in Pindorama, constituting six species belonging to four genera, and 129 social wasps were collected in Neves Paulista constituting 12 species belonging to seven genera. In order to compare these three areas ecological indexes were calculated. Neves Paulista had the greatest diversity, and Paulo de Faria presented greater abundance. These factors were probably caused by neighboring areas and ecological corridors, which were limited in Paulo de Faria and Pindorama.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

PURPOSE: Recent work practices in the conservation and restoration involve the use of cyclododecane (CDD, CAS 294-62-2) to protect fragile artifacts during their handling or transportation. Little is known about its toxicity, and no previous exposure has been reported. A short field investigation was conducted to characterize the exposure conditions to both CDD vapors and aerosols.METHODS: Measurements were conducted in the laboratory of conservation and restoration of the archeological service in Bern (Switzerland). Three indoor and four outdoor typical work situations, either during brush or spray gun applications, were investigated. Measurements were performed on charcoal adsorbent tube and analyzed by a gas chromatograph equipped with a flame ionization detector.RESULTS: Measurements have been conducted during both brush and spray gun applications. Indoor exposures were of 0.75-15.5 mg/m(3), while outdoors exposures were 19.5-53.9 mg/m(3). Exposures appear to be extremely localized due to both physicochemical properties and application methods of the CDD. Vapor exposure increases dramatically with the confinement of the workplace.CONCLUSION: Preventive measures should be undertaken to limit as much as possible these exposures. Field work in confined areas (ditches, underground) is of particular concern. CDD-coated artifacts or materials should be stored in ventilated areas to avoid delayed exposures. [Authors]

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Adequate in-vitro training in valved stents deployment as well as testing of the latter devices requires compliant real-size models of the human aortic root. The casting methods utilized up to now are multi-step, time consuming and complicated. We pursued a goal of building a flexible 3D model in a single-step procedure. We created a precise 3D CAD model of a human aortic root using previously published anatomical and geometrical data and printed it using a novel rapid prototyping system developed by the Fab@Home project. As a material for 3D fabrication we used common house-hold silicone and afterwards dip-coated several models with dispersion silicone one or two times. To assess the production precision we compared the size of the final product with the CAD model. Compliance of the models was measured and compared with native porcine aortic root. Total fabrication time was 3 h and 20 min. Dip-coating one or two times with dispersion silicone if applied took one or two extra days, respectively. The error in dimensions of non-coated aortic root model compared to the CAD design was <3.0% along X, Y-axes and 4.1% along Z-axis. Compliance of a non-coated model as judged by the changes of radius values in the radial direction by 16.39% is significantly different (P<0.001) from native aortic tissue--23.54% at the pressure of 80-100 mmHg. Rapid prototyping of compliant, life-size anatomical models with the Fab@Home 3D printer is feasible--it is very quick compared to previous casting methods.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The DOT is in the process of replanting all the roadsides on state primary highways to native grasses and wildflowers. While the existing vegetation may look nice, it is not functioning as well as needed for roadside purposes such as erosion control, water infiltration or weed competition. The DOT currently spends nearly $3 million each year to clean ditches, remove silt, and spray and mow weeds. The DOT believes the native vegetation, once established, will provide sufficient benefits and reduced maintenance costs to warrant replacing the existing vegetation.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

The chemical resistance of ceramic tiles is the subject of the European Standard UNE-EN ISO 10545-13. In order to evaluate the effect of aqueous solutions of several chemicals agents on the aspect of the tile surface, this standard establishes a series of tests at room temperature followed by visual inspection. According to this standard the tiles of this study are classified as being of maximum resistance (UHA). However operating conditions can be more aggressive than those detailed in the standard. So, a systematic study has been undertaken. In the present work, the effect of aqueous solutions of several organic and inorganic acids on the tile surface is evaluated. Samples immersed in different solutions are subjected to the following conditions: T= 60º C; pH=2 and to agitation processes. Visual analysis, as well as optical microscopy and scanning electron microscopy (SEM) were performed in order to determine the possible variation of the superficial aspect of tiles. Moreover, atomic absorption spectrophotometry has been used in order to obtain quantitative information concerning the solubility of system M (III)-L (M= Fe; L= H2O or L= ligand). The results obtained show, in all cases, a progressive dissolution of iron oxide precipitates presents in the ceramic body

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Summary : Due to anthropogenic impacts and natural fluctuations, fish usually have to cope with constantly changing and often hostile environments. Whereas adult fish have various possibilities to counteract unfavourable environmental conditions, embryos have much fewer options. Besides by their developing immune system, they are protected by the egg envelopes and several immune substances provided by their mothers. In addition to this, they may also adjust their hatching timing in reaction to various risks. However, individuals may vary in their defensive potential. This variation may be either based on their genetics and/or on differential maternal investments and may be dependent on the experienced stress. Nevertheless, in fish, the impact of such parental contributions on embryo and/or juvenile viability is still poorly investigated. The main objective of this thesis was to investigate the importance of paternal (i.e. genetic) and maternal (i.e. genetic + egg investment) contributions to offspring viability under different environmental conditions and at different life stages. In order to investigate this, we used gametes of various salmonids for in vitro fertilisation experiments based on full-factorial breeding designs. The individual studies are summarised in the following chapters: In the first chapter, we tested the effectiveness of the embryonic immune system in Lake whitefish (Coregonus palaea). Namely, we investigated paternal and maternal contributions to the embryos' tolerance to different kinds of pathogen exposure. Additionally, we tested whether an early sub-léthal exposure has a positive or a negative effect on an embryo's susceptibility to later pathogen exposures with the same pathogen. We found that pre-challenged embryos were more susceptible to future challenges. Moreover, pathogen susceptibility was dependent on maternal investments and/or the embryos' own genetics, depending on the challenge level. Chapter 2 summarises a similar study with brown trout (Salmo trutta). In addition to the previously described investigations, we analysed if genetic effects on offspring viability are mediated either by parental MHC genotypes or relatedness based on neutral microsatellite markers, and we tested if males signal their genetic quality either by their body size or their melanin-based skin colouration. We found that embryo survival was lower at higher stress levels and dependent on the embryos' genetics. Addirionally, parents with similar and/or, very common MHC genotypes had higher offspring viabilities. Finally, darker males produced more viable offspring. In the first two chapters we investigated the embryos' defensive potential based on their immune system, i.e. their pathogen tolerance. In chapter 3 we investigate whether hatching timing of Lake whitefìsh (C. palaea) is dependent on parental contributions and/or on pathogen pressure, and whether there are parental-environmental interactions. We found that whitefish embryos hatch earlier under increasing pathogen pressure. Moreover, hatching timing was affected by embryo genetics and/or maternally provided resources, but the magnitude of the effect was dependent on the pathogen. pressure. We also found a significant paternal-environmental interaction, indicating that the hatching efficiency of a certain sib group is dependent on the pathogen environment. Chapter 4 describes an analogous study with brown trout (S. trutta), with similar findings. In the former chapters, we only looked at offspring performance during the embryonic period, and only under semi-natural conditions. In chapter 5 we now test the performance and viability of embryonic and juvenile brown trout (S. trutta) under natural conditions. To measure embryo viability, we put them in brood boxes, buried them in the gravel of a natural river, and analysed survival after several months. To investigate juvenile survival and performance, wé reared embryos under different stress levels in the laboratory and subsequently released the resulting hatchlings in to a closed river section. Juvenile size and survival was then determined one year later. Additionally, we investigated if sires differ in their genetic quality, determined by embryo and juvenile survival as well as juvenile size, and if they signal their quality by either body size or melanin-based body darkness. We found hat juvenile size was dependent on genetic effects and on maternal investment, whereas this was neither the case for embryo nor for juvenile survival. Additionally, we found that offspring of darker males grew larger, and larger juveniles had also an increased survival. Finally, we found acarry-over effect of the early non-lethal challenge: exposing embryos to higher stress levels resulted in smaller juveniles. To evaluate the long-term performance of differently treated groups, mark-recapture studies are inevitable. For this purpose, effective mass-marking techniques are essential. In chapter 6 we tested the suitability of the fluorescent pigment spray marking method for the mass marking of European graylings (Thymallus thymallus), with very promising results. Our in vitro fertilisation studies on whitefish may reveal new insights on potential genetic benefits of mate choice, but the mating system of whitefish under natural conditions is still poorly investigated. In order to study this, we installed underwater cameras at the spawning place of a Coregonus suidteri population, recorded the whole mating period and subsequently analysed the recordings. Confirmations of previous findings as well as exciting new observations are listed and discussed in chapter 7. Dus aux impacts anthropogéniques et aux fluctuations naturelles, les poissons doivent faire face à des environnements en perpétuel changement. Ces changements font que les poissons doivent s'adapter à de nouvelles situations, souvent hostiles pour eux. Les adultes ont différentes possibilités d'échapper à un environnement peu favorable, ce n'est par contre pas le cas des embryons. Les embryons sont protégés d'une part par leur système immunitaire en développement, d'autre part, par la coquille de l'eeuf et différentes substances immunitaires fournies par leur mère. De plus, ils sont capables d'influencer leur propre date d'éclosion en réponse à différents facteurs de stress. Malgré tout, les individus varient dans leur capacité à se défendre. Cette variation peut être basé sur des facteurs génétiques et/ou sur des facteurs maternels, et est dépendante du stress subi. Néanmoins, chez les poissons, l'impact de telles contributions parentales sur la survie d'embryons et/ou juvéniles est peu étudié. L'objectif principal de cette thèse a été d'approfondir les connaissances sur l'importance de la contribution paternelle (c.a.d. génétique) et maternelle (c.a.d. génétique + investissement dans l'oeuf) sur la survie des jeunes dans différentes conditions expérimentales et stades de vie. Pour faire ces analyses, nous avons utilisé des gamètes de divers salmonidés issus de croisements 'full-factorial'. Les différentes expériences sont résumées dans les chapitres suivants: Dans le premier chapitre, nous avons testé l'efficacité du système immunitaire des embryons chez les corégones (Coregonus palea). Plus précisément nous avons étudié la contribution paternelle et maternelle à la tolérance des embryons à différents niveaux de stress pathogène. Nous avons aussi testé, si une première exposition non létale à un pathogène avait un effet positif ou négatif sur la susceptibilité d'un embryon a une deuxième exposition au même pathogène. Nous avons trouvé que des embryons qui avaient été exposés une première fois étaient plus sensibles au pathogène par la suite. Mais aussi que la sensibilité au pathogène était dépendante de l'investissement de la mère et/ou des gènes de l'embryon, dépendamment du niveau de stress. Le deuxième chapitre résume une étude similaire avec des truites (Salmo truffa). Nous avons examiné, si la survie des jeunes variait sous différentes intensités de stress, et si la variance observée était due aux gènes des parents. Nous avons aussi analysé si les effets génétiques sur la survie des juvéniles étaient dus au MHC (Major Histocompatibility Complex) ou au degré de parenté des parents. De plus, nous avons analysé si les mâles signalaient leur qualité génétique par la taille du corps ou par leur coloration noire, due à la mélanine. On a trouvé que la survie des embryons était plus basse quand le niveau de stress était plus haut mais que la variation restait dépendante de la génétique des embryons. De plus, les parents avec des MHC similaires et/ou communs avaient des embryons avec une meilleure survie. Par contre, des parents avec un degré de parenté plus haut produisent des embryons avec une survie plus mauvaise. Finalement nous avons montré que les mâles plus foncés ont des embryons qui survivent mieux, mais que la taille des mâles n'a pas d'influence sur la survie de ces mêmes embryons. Dans les deux premiers chapitres, nous avons étudié le potentiel de défense des embryons basé sur leur système immunitaire, c.a.d. leur tolérance aux pathogènes. Dans le troisième chapitre, nous nous intéressons à la date d'éclosion des corégones (C. palea), pour voir si elle est influencée par les parents ou par la pression des pathogènes, et si il y a une interaction entre ces deux facteurs. Nous avons trouvé que les jeunes naissent plus rapidement lorsque la pression en pathogènes augmente. La date d'éclosion est influencée par la génétique des embryons et/ou l'investissement des parents, mais c'est la magnitude des effets qui est dépendante de la pression du pathogène. Nous avons aussi trouvé une interaction entre l'effet paternel et l'environnement, ce qui indique que la rapidité d'éclosion de certains croisements est dépendante des pathogènes dans l'environnement. Le chapitre 4 décrit une étude analogue avec de truites (S. truffa), avec des résultats sitzimilaires. Dans les précédents chapitres nous nous sommes uniquement concentrés sur les performances des jeunes durant leur stade embryonnaire, et seulement dans des conditions semi naturelles. Dans le chapitre 5 nous testons la performance et la viabilité des embryons et de juvéniles de truites (S. truffa) dans des conditions naturelles. Nous avons trouvé que la taille des juvéniles était dépendante d'effets génétiques et de l'investissement maternel, mais ceci n'était ni les cas pour les survie des embryons et des juvéniles. De plus, nous avons trouvé que les jeunes des mâles plus foncés devenaient plus grands et que les grands ont un meilleur taux de survie. Finalement nous avons trouvé un 'carry-over effect' d'une première exposition non létale à un pathogène: exposer des embryons à des plus hauts niveaux de stress donnait des juvéniles plus petits. Pour évaluer la performance à long terme de groupes traités dé manières différentes, une méthode de marquage-recapture est inévitable. Pour cette raison, des techniques de marquage en masse sont nécessaires. Dans le chapitre 6, nous avons testé l'efficacité de la technique `fluorescent pigment spray marking' pour le marquage en masse de l'Ombre commun (Thymallus thymallus), avec des résultats très prometteurs. Les études de fertilisations in vitro avec les corégones nous donnent une idée du potentiel bénéfice génétique que représente la sélection d'un bon partenaire, même si le système d'accouplement des corégones en milieu naturel reste peu connu. Pour combler cette lacune, nous avons installé des caméras sous-marines autour de la frayère d'une population de corégones (C. suidteri), nous avons enregistré toute la période de reproduction et nous avons analysé les données par la suite. Ainsi, nous avons été capables de confirmer bien des résultats trouvés précédemment, mais aussi de faire de nouvelles observations. Ces résultats sont reportés dans le septième chapitre, où elles sont comparées avec des observations antérieures.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Silver has been demonstrated to be a powerful cationization agent in mass spectrometry (MS) for various olefinic species such as cholesterol and fatty acids. This work explores the utility of metallic silver sputtering on tissue sections for high resolution imaging mass spectrometry (IMS) of olefins by laser desorption ionization (LDI). For this purpose, sputtered silver coating thickness was optimized on an assorted selection of mouse and rat tissues including brain, kidney, liver, and testis. For mouse brain tissue section, the thickness was adjusted to 23 ± 2 nm of silver to prevent ion suppression effects associated with a higher cholesterol and lipid content. On all other tissues, a thickness of at 16 ± 2 nm provided the best desorption/ionization efficiency. Characterization of the species by MS/MS showed a wide variety of olefinic compounds allowing the IMS of different lipid classes including cholesterol, arachidonic acid, docosahexaenoic acid, and triacylglyceride 52:3. A range of spatial resolutions for IMS were investigated from 150 μm down to the high resolution cellular range at 5 μm. The applicability of direct on-tissue silver sputtering to LDI-IMS of cholesterol and other olefinic compounds presents a novel approach to improve the amount of information that can be obtained from tissue sections. This IMS strategy is thus of interest for providing new biological insights on the role of cholesterol and other olefins in physiological pathways or disease.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

A novel NO2 sensor based on (CdO)x(ZnO)1-x mixed-oxide thin films deposited by the spray pyrolysis technique is developed. The sensor response to 3-ppm NO2 is studied in the range 50°C-350°C for three different film compositions. The device is also tested for other harmful gases, such as CO (300 ppm) and CH4 (3000 ppm). The sensor response to these reducing gases is different at different temperatures varying from the response typical for the p-type semiconductor to that typical for the n-type semiconductor. Satisfactory response to NO2 and dynamic behavior at 230°C, as well as low resistivity, are observed for the mixed-oxide film with 30% Cd. The response to interfering gas is poor at working temperature (230°C). On the basis of this study, a possible sensing mechanism is proposed.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Em solos de restinga de constituição areno-quartzosa aumenta a influência da fração orgânica e da atividade biológica em funções-chave dos solos, como a capacidade de reciclar e armazenar nutrientes. A análise de atributos do solo e da fauna edáfica em sítios sob diferentes coberturas vegetais é importante para entender o comportamento desses ambientes. Neste estudo, avaliaram-se atributos químicos, físicos e microbiológicos do solo e suas relações com a população de formigas de sítios de restinga sob diferentes coberturas vegetais no Estado de Sergipe. Foram coletadas amostras em seis coberturas vegetais (três sítios por cobertura), sendo quatro na área Caju (mata, capim-gengibre, coqueiral e capoeira) e duas na área Pirambu (mata de topo de duna e mata de sopé de duna). As análises químicas foram feitas em amostras coletadas nas camadas de 0-5 e 5-20 cm, e a atividade microbiana, avaliada por meio da hidrólise do diacetato de fluoresceína, foi determinada em amostras coletadas a 0-10 cm. A massa de fragmentos orgânicos foi avaliada em diferentes profundidades. Na avaliação das comunidades de formigas foram consideradas aquelas com atividade na superfície do solo. Na comparação entre os sítios foi utilizada a análise de componentes principais. Os atributos de compartimentos orgânicos (C orgânico, C orgânico dissolvido e fragmentos orgânicos) foram muito sensíveis à modificação da cobertura vegetal nos sítios do Caju, isolando os sítios sob mata dos alterados e os sítios sob capim-gengibre daqueles sob capoeira e coqueiral. Atributos da solução do solo influenciáveis pelo spray marinho (condutividade elétrica e concentração de K, Na e Mg) isolaram os sítios de Pirambu dos sítios do Caju. Os grupos de formiga mostraram elevado nível de especialização. A análise de correspondência canônica apontou baixa percentagem da variância da distribuição desses grupos e isolou os sítios de mata dos outros usos, indicando que existem outros atributos a serem considerados na distribuição.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Background: Bacteria form a biofilm on the surface of orthopaedic devices, causing persistent and infection. Little is known about biofilms formation on bone grafts and bone substitutes. We analyzed various representative materials regarding their propensity for biofilm formation caused by Staphylococcus aureus.Methods: As bone graft beta-tricalciumphosphate (b-TCP, CyclOsTM) and as bone substitute a tantalum metal mesh (trabecular metalTM) and PMMA (Pala-cosTM) were investigated. As test organism S. aureus (strain ATCC 29213) was used. Test materials were incubated with bacterial solution of 105 colony-forming units (cfu)/ml at 37°C for 24 h without shaking. After 24 h, the test materials were removed and washed 3 times in normal saline, followed by sonication in 50 ml Ringer solution at 40 kHz for 5 minutes. The resulting sonication fluid was plated in aliquots of 0.1 ml onto aerobe blood agar with 5% sheep blood and incubated at 37°C with 5% CO2 for 24 h. Then, bacterial counts were enumerated and expressed as cfu/ml. All experiments were performed in triplicate to calculate the mean ± standard deviation. The Wilcoxon test was used for statistical calculations.Results: The three investigated materials show a differing specific surface with b-TCB>trabecular metal>PMMA per mm2. S. aureus formed biofilm on all test materials as confirmed by quantitative culture after washing and sonication. The bacterial counts in sonication fluid (in cfu/ml) were higher in b-TCP (5.1 x 106 ± 0.6 x 106) and trabecular metal (3.7 x 106 ± 0.6 x 106) than in PMMA (3.9 x 104 ± 1.8 x 104), p<0.05.Conclusion: Our results demonstrate that about 100-times more bacteria adhere on b-TCP and trabecular metal than on PMMA, reflecting the larger surface of b-TCP and trabecuar metal compared to the one of PMMA. This in-vitro data indicates that bone grafts are susceptible to infection. Further studies are needed to evaluate efficient approaches to prevent and treat infections associated with bone grafts and substitutes, including modification of the surface or antibacterial coating.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Fibrin sealant is used in many areas of surgery. We present a novel aspect of flap insetting in the ischial region using fibrin spray to seal the transferred tissue. We analyzed 10 patients suffering from decubital ulcers and assessed drainage output, time of drain removal, as well as complications following fasciocutaneous flap surgery. Patients were randomized to receive sprayed fibrin glue (study group) or not (control group) before wound closure. The mean drainage time was 4 +/- 1 days in the study group and 6 +/- 1 days in the control group ( P = 0.06). The mean drainage volume was 100 +/- 20 mL in the study group and 168 +/- 30 mL in the control group ( P < 0.01). Fibrin sealant led to reduced drainage volumes and duration of drainage, indicating a beneficial effect of the application of fibrin glue in fasciocutaneous flap surgery for pressure sore coverage.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This report presents the results of the largest and most comprehensive study to date on portland cement pervious concrete (PCPC). It is designed to be widely accessible and easily applied by designers, producers, contractors, and owners. The project was designed to begin with pervious concrete best practices and then to address the unanswered questions in a systematic fashion to allow a successful overlay project. Consequently, the first portion of the integrated project involved a combination of fundamental material property investigations, test method development, and addressing constructability issues before actual construction could take place. The second portion of the project involved actual construction and long-term testing before reporting successes, failures, and lessons learned. The results of the studies conducted show that a pervious concrete overlay can be designed, constructed, operated, and maintained. A pervious concrete overlay has several inherent advantages, including reduced splash and spray and reduced hydroplaning potential, as well as being a very quiet pavement. The good performance of this overlay in a particularly harsh freeze-thaw climate, Minnesota, shows pervious concrete is durable and can be successfully used in freeze-thaw climates with truck traffic and heavy snow plowing.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Introduction Le cadre conceptuel de l'analyse économique considère que l'individu prend des décisions en mettant en balance les avantages et les inconvénients que ces décisions présentent pour lui. En s'appuyant sur ses préférences et en intégrant ses contraintes (matérielles, physiques, externes, etc.), il choisit d'effectuer ou non une action, d'adopter ou pas un comportement, de façon à ce que les conséquences de ses choix maximisent sa satisfaction. Le fait qu'un individu adopte un certain comportement révèle donc le caractère positif pour lui des conséquences de ce comportement. C'est le postulat méthodologique de rationalité du consommateur, fondement de toute analyse économique. L'adoption par un individu d'un comportement qui implique un risque pour son bien-être physique ou mental suit le même schéma d'analyse. Il résulte d'un arbitrage inter temporel entre la satisfaction que procure ce comportement et le coût du risque associé. Ce risque se définit par la combinaison de la probabilité d'occurrence de l'événement redouté avec la gravité de ses conséquences. En adoptant un comportement à risque, l'individu révèle donc que ce comportement a pour lui un impact net positif. Certains comportements à risque, comme la consommation de tabac et, plus largement, de psychotropes, engendrent une dépendance à même de brider le libre-arbitre du consommateur. Un individu peut être amené à consommer un produit alors même que sa raison lui dicte de ne pas le faire. Ces comportements ont longtemps été considérés par les économistes comme extérieurs au champ d'analyse de leur discipline, la dépendance paraissant antinomique avec le concept de rationalité du consommateur. Par son modèle de dépendance rationnelle, Gary Stanley Becker prend le contre-pied de cette approche en montrant qu'un comportement de dépendance pouvait parfaitement s'expliquer par la maximisation de la fonction de satisfaction d'un individu rationnel et informé. Il postule que les consommateurs de stupéfiants sont conscients des conséquences futures de leurs décisions présentes, tant du point de vue de leur santé que de celui de la dépendance. Dans ce modèle, la dépendance implique deux effets le renforcement et la tolérance. Le renforcement signifie que plus un bien a été consommé dans le passé, plus l'augmentation de sa consommation courante est valorisée. En d'autres termes, l'utilité marginale de la consommation courante augmente avec la consommation antérieure. La tolérance traduit le fait qu'un individu habitué à la consommation d'un bien tirera d'une consommation donnée une satisfaction inférieure par rapport à un individu qui a peu consommé par le passé. Dans l'exemple du tabagisme, l'effet de renforcement implique qu'un grand fumeur ressent une forte envie de fumer, mais que plus il a fumé dans le passé, plus le plaisir qu'il ressent en fumant une quantité donnée de cigarettes diminue. Le premier effet explique le phénomène de manque et le second explique pourquoi la satisfaction qu'un fumeur retire de sa consommation de cigarettes tend à diminuer avec le temps. Selon Becker, l'individu choisit de devenir dépendant : il sait que sa consommation présente de cigarettes contraint ses choix futurs et il détermine au départ sa consommation sur l'ensemble de sa vie. Cependant, ce modèle n'est pas compatible avec les regrets exprimés par de nombreux fumeurs et les tentatives infructueuses de sevrage souvent concomitantes. Un fumeur qui anticiperait parfaitement le phénomène de dépendance arrêterait de fumer à la date voulue, à sa première tentative. Partant de ce constat, Athanasios Orphanides a construit un modèle dans lequel les fumeurs peuvent se retrouver prisonniers de leur consommation par des anticipations imparfaites du pouvoir addictif du tabac. Leur théorie suppose que les individus ne sont pas tous sujets de la même manière à la dépendance, que chacun a une perception subjective de son risque de dépendance et que cette perception évolue constamment durant la période de consommation du bien addictif. Dans ce contexte, un individu qui maximise des préférences stables, mais qui sous-estime le potentiel addictif d'un produit peut devenir dépendant par accident et regretter ensuite cette dépendance. Le modèle de Becker ou celui d'Orphanides ont des conséquences très différentes sur l'action régulatrice que doit ou non jouer l'État sur le marché d'un bien addictif. Si, comme Becker, on considère que les consommateurs sont rationnels et parfaitement informés des conséquences de leurs actes, l'action du régulateur devrait se limiter à l'internalisation du coût externe que les fumeurs font peser sur la société. Si le fumeur est conscient du risque qu'il prend et que pour lui le plaisir qu'il retire de cette consommation dépasse le déplaisir engendré par ses conséquences, une intervention du régulateur reposerait sur une base paternaliste, l'État posant alors un jugement de valeur sur les préférences des individus. En revanche, si on considère, comme dans la modélisation d'Orphanides, que les fumeurs sous-estiment le phénomène de dépendance lorsqu'ils décident de se mettre à fumer, un marché non régulé conduit à une consommation supérieure à celle qui prévaudrait en information parfaite. Certains fumeurs peuvent ainsi se retrouver accrochés à leur consommation de tabac, sans que cela ait été leur but. Dans cette perspective, l'État est légitimé à intervenir par des politiques de lutte contre le tabagisme, afin de compenser les erreurs d'anticipation des individus. Cette thèse propose d'appliquer les outils de l'analyse économique à des problématiques de santé publique dans le domaine des comportements à risque et en particulier du tabagisme. Elle a pour finalité d'apporter de nouveaux éléments de connaissance permettant d'éclairer certains choix de régulation dans ce domaine. Le premier chapitre est une analyse coût-efficacité des thérapies médicamenteuses de soutien à la désaccoutumance tabagique. Comme nous l'avons vu plus haut, certains fumeurs se trouvent piégés dans leur consommation par le phénomène de dépendance et ont des difficultés à arrêter de fumer. Ces dernières années, plusieurs médicaments de soutien au fumeur en phase de sevrage ont fait leur apparition. Parmi eux, on compte des substituts nicotiniques sous forme de gomme, patch, spray ou inhalateur, mais aussi un antidépresseur ne contenant pas de nicotine. Ces traitements présentent des efficacités et des coûts différents. L'évaluation économique en santé permet de calculer un indicateur unique d'efficience qui synthétise l'efficacité d'un traitement et son coût. Cette méthode permet de comparer différents types de prises en charge médicales d'une même pathologie, mais aussi de comparer des interventions thérapeutiques dans des domaines différents. Nous développons un modèle de Markov pour estimer le gain en année de vie d'une stratégie de prévention du tabagisme. Ce modèle permet de simuler le devenir d'une cohorte de fumeurs en fonction du type de soutien à la désaccoutumance qui leur est proposé. Sur cette base, nous calculons le coût par année de vie gagnée de chaque type d'intervention. Les résultats permettent de classer les cinq types de prise en charge selon leur efficience, mais aussi de les comparer à d'autres interventions de prévention dans des domaines différents. Le deuxième chapitre traite des corrélations entre le niveau de formation des individus et leur consommation de tabac. Sur un plan épidémiologique, on constate que les personnes qui atteignent un niveau de formation plus élevé ont une propension à fumer plus faible que les autres. Peut-on en conclure qu'il existe une relation causale inverse entre formation et tabagisme ? Sous l'angle de la théorie économique, il existe deux principales hypothèses à même d'expliquer cette corrélation. La première hypothèse repose sur le modèle de capital santé développé par Michael Grossman au début des années 1970. Dans ce modèle, l'individu dispose d'un stock de santé qui se déprécie avec le temps. Ce stock peut être augmenté grâce à des dépenses en soins médicaux ou à des investissements en temps consacré à l'amélioration de sa santé. La formation a pour effet d'augmenter l'efficacité des investissements en santé. Dans le cas du tabac, Grossman considère que des individus mieux formés auront une meilleurs information sur les méfaits du tabac sur la santé, ce qui tendra à diminuer leur consommation de tabac. La seconde hypothèse ne considère pas un lien causal entre la formation et la santé, mais repose sur l'existence d'une tierce variable qui influencerait parallèlement, et dans un sens opposé, le niveau de formation et la propension à fumer. Cette tierce variable est le taux de préférence pour le présent. Pour un individu fortement tourné vers le présent, l'investissement en temps de formation a un coût relativement élevé dans la mesure où il doit sacrifier du revenu aujourd'hui pour obtenir un revenu plus élevé demain. Parallèlement, il pondère moins fortement la santé future et a donc une plus forte propension à fumer. Nous développons une méthode économétrique qui permet de séparer l'effet de causalité de l'effet de sélection. Le troisième chapitre traite du rôle des interactions sociales dans les comportements à risque des adolescents. La théorie économique considère que chaque individu définit seul ses choix de consommation en maximisant sa fonction d'utilité. Cela ne signifie pas pour autant qu'il soit insensible aux influences extérieures, notamment au comportement de son entourage. Dans certaines situations et pour certains produits, l'utilité que procure la consommation d'un bien est corrélée avec le nombre de personnes qui consomment ce même bien dans l'entourage. En d'autres termes, la consommation des autres, augmente la valeur que l'on attribue à un bien. Ce mécanisme est souvent appliqué à l'analyse des comportements à risque des adolescents et du rôle que peut y jouer le groupe des pairs. Si cet impact est bien connu du point de vue théorique, il est beaucoup plus difficile de le quantifier sur un plan empirique. Pour identifier cet effet, nous développons une méthodologie économétrique, originale dans ce contexte, qui permet de séparer l'effet individuel de l'effet d'influence des pairs dans l'adoption d'un comportement à risque. Nous appliquons cette méthode aux trois comportements à risque que sont la consommation de tabac, d'alcool et de cannabis chez les adolescents.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

This manual summarizes the roadside tree and brush control methods used by all of Iowa's 99 counties. It is based on interviews conducted in Spring 2002 with county engineers, roadside managers and others. The target audience of this manual is the novice county engineer or roadside manager. Iowa law is nearly silent on roadside tree and brush control, so individual counties have been left to decide on the level of control they want to achieve and maintain. Different solutions have been developed but the goal of every county remains the same: to provide safe roads for the traveling public. Counties in eastern and southern Iowa appear to face the greatest brush control challenge. Most control efforts can be divided into two categories: mechanical and chemical. Mechanical control includes cutting tools and supporting equipment. A chain saw is the most widely used cutting tool. Tractor mounted boom mowers and brush cutters are used to prune miles of brush but have significant safety and aesthetic limitations and boom mowers are easily broken by inexperienced operators. The advent of tree shears and hydraulic thumbs offer unprecedented versatility. Bulldozers are often considered a method of last resort since they reduce large areas to bare ground. Any chipper that violently grabs brush should not be used. Chemical control is the application of herbicide to different parts of a plant: foliar spray is applied to leaves; basal bark spray is applied to the tree trunk; a cut stump treatment is applied to the cambium ring of a cut surface. There is reluctance by many to apply herbicide into the air due to drift concerns. One-third of Iowa counties do not use foliar spray. By contrast, several accepted control methods are directed toward the ground. Freshly cut stumps should be treated to prevent resprouting. Basal bark spray is highly effective in sensitive areas such as near houses. Interest in chemical control is slowly increasing as herbicides and application methods are refined. Fall burning, a third, distinctly separate technique is underused as a brush control method and can be effective if timed correctly. In all, control methods tend to reflect agricultural patterns in a county. The use of chain saws and foliar sprays tends to increase in counties where row crops predominate, and boom mowing tends to increase in counties where grassland predominates. For counties with light to moderate roadside brush, rotational maintenance is the key to effective control. The most comprehensive approach to control is to implement an integrated roadside vegetation management (IRVM) program. An IRVM program is usually directed by a Roadside Manager whose duties may be shared with another position. Funding for control programs comes from the Rural Services Basic portion of a county's budget. The average annual county brush control budget is about $76,000. That figure is thought not to include shared expenses such as fuel and buildings. Start up costs for an IRVM program are less if an existing control program is converted. In addition, IRVM budgets from three different northeastern Iowa counties are offered for comparison in this manual. The manual also includes a chapter on temporary traffic control in rural work zones, a summary of the Iowa Code as it relates to brush control, and rules on avoiding seasonal disturbance of the endangered Indiana bat. Appendices summarize survey and forest cover data, an equipment inventory, sample forms for record keeping, a sample brush control policy, a few legal opinions, a literature search, and a glossary.

Relevância:

10.00% 10.00%

Publicador:

Resumo:

Surface characteristics (area, chemical reactivity) play an important role in cell response to nanomaterials. The aim of this study was to evaluate the oxidative and inflammatory effects of multi−wall carbon nanotubes (MWCNT) uncoated (P0) or coated with carboxylic polyacid or polystyrene polybutadiene polymetacrylate of methyl polymers (P1 and P2 respectively) on murine macrophages (RAW 264.7 cell line). Carbon black nanoparticles (CB, diameter 95 nm) and crocidolite fibers (diameter: 80 nm, length: < 10 μm) were used as controls. Surface functional groups present on MWCNTs were analyzed by Knudsen flow reactor. The amount of acidic sites was P1> P0> P2, for basic sites was P0> P1>> P2 and for oxidizable sites was P0> P2> P1. In contact with cells, P2 formed smaller aggregates than P0 and P1, which were of similar size. Optical microscopy showed the formation of vacuoles after exposure only to P0, P1 and crocidolite. Incubation of cells with P0, P1 and crocidolite fibers induced a significant and similar decrease in metabolic activity, whereas P2 and CB had no effect. Cell number and membrane permeability were unmodified by incubation with the different particles. Incubation of macrophages with P0, P1 and crocidolite induced a dose− and time−dependent increase in mRNA expression of oxidative stress marker (HO−1, GPX1) and inflammatory mediators (TNF−a, MIP−2). No such responses were observed with P2 and CB. In conclusion, MWCNT coated with a carboxylic polyacid polymer exerted similar oxidative and inflammatory effects to uncoated MWCNT. By contrast, no such effects were observed with MWCNT coated with a polystyrene−based polymer. This kind of coating could be useful to decrease MWCNT toxicity.