Simultaneous voltammetric determination of paracetamol and caffeine in pharmaceutical formulations using a boron-doped diamond electrode

A simple and highly selective electrochemical method was developed for the single or simultaneous determination of paracetamol (N-acetyl-p-aminophenol, acetaminophen) and caffeine (3,7-dihydro-1,3,7-trimethyl-1H-purine-2,6-dione) in aqueous media (acetate buffer, pH 4.5) on a boron-doped diamond (BDD) electrode using square wave voltammetry (SWV) or differential Pulse voltammetry (DPV). Using DPV with the cathodically pre-treated BDD electrode, a separation of about 550 mV between the peak oxidation potentials Of paracetamol and caffeine present in binary mixtures was obtained. The calibration curves for the simultaneous determination of paracetamol and caffeine showed an excellent linear response, ranging from 5.0 x 10(-7) mol L(-1) to 8.3 x 10(-7) mol L(-1) for both compounds. The detection limits for the simultaneous determination of paracetamol and caffeine were 4.9 x 10(-7) mol L-1 and 3.5 x 10(-8) mol L(-1), respectively. The proposed method Was Successfully applied in the simultaneous determination of paracetamol and caffeine in several pharmaceutical formulations (tablets), with results similar to those obtained using a high-performance liquid chromatography method (at 95% confidence level). (C) 2008 Elsevier BY. All rights reserved.

Simultaneous prediction of symptom severity and cause in data from a test battery for Parkinson patients, using machine learning methods

The main purpose of this thesis project is to prediction of symptom severity and cause in data from test battery of the Parkinson’s disease patient, which is based on data mining. The collection of the data is from test battery on a hand in computer. We use the Chi-Square method and check which variables are important and which are not important. Then we apply different data mining techniques on our normalize data and check which technique or method gives good results.The implementation of this thesis is in WEKA. We normalize our data and then apply different methods on this data. The methods which we used are Naïve Bayes, CART and KNN. We draw the Bland Altman and Spearman’s Correlation for checking the final results and prediction of data. The Bland Altman tells how the percentage of our confident level in this data is correct and Spearman’s Correlation tells us our relationship is strong. On the basis of results and analysis we see all three methods give nearly same results. But if we see our CART (J48 Decision Tree) it gives good result of under predicted and over predicted values that’s lies between -2 to +2. The correlation between the Actual and Predicted values is 0,794in CART. Cause gives the better percentage classification result then disability because it can use two classes.

Determination of Thermal and Blue Light Photochemical Hazard Protection needed by Automatic Welding filters

Recent developments in biological research, has shown that the initial maximum permissible exposure (MPE) limits for protection of workers from risks associated with artificial optical radiations were more stringent than needed. Using the most recent MPE limits for artificial optical radiation this piece of work was focused on the investigation of the level of visible light attenuation needed by automatic welding filters in case of switching failure. Results from the comparison of different exposure standards were employed in investigating the need of Vis/IR and blue light transmittance requirement for automatic welding filters. Real and arbitrary spectra were taken into consideration for the worst and best case scenarios of artificial optical radiations. An excel worksheet developed during the execution of this project took into consideration the exposure from different light sources and the precision of the spectrometer used in measuring the transmittances of a welding filter. The worksheet was developed and tested with known product properties to investigate the validity of its formulation. The conclusion drawn from this project was that attenuation in the light state will be needed for products with the darkest state shade 11 or higher. Also shown is that current welding filter protects the eye well enough even in the case of switching failure.

Fitting conditional and simultaneous autoregressive spatial models in hglm

We present a new version (> 2.0) of the hglm package for fitting hierarchical generalized linear models (HGLMs) with spatially correlated random effects. CAR() and SAR() families for conditional and simultaneous autoregressive random effects were implemented. Eigen decomposition of the matrix describing the spatial structure (e.g., the neighborhood matrix) was used to transform the CAR/SAR random effects into an independent, but eteroscedastic, Gaussian random effect. A linear predictor is fitted for the random effect variance to estimate the parameters in the CAR and SAR models. This gives a computationally efficient algorithm for moderately sized problems.

Metodologia de análise de dioxinas em cinzas obtidas da incineração de couro Wet-Blue

O presente trabalho trata da validação de uma metodologia de análise para a determinação de dibenzo-p-dioxinas policloradas (PCDDs) em cinzas obtidas através de um processo de incineração de aparas de couro wet-blue. As dioxinas, compostos de extrema toxicidade, podem ser formadas na superfície das partículas de cinzas em reações de combustão. O mecanismo de formação de PCDDs requer uma atmosfera rica em oxigênio, uma fonte de cloro e a presença na cinza de um metal capaz de catalizar uma reação Deacon. O couro wet-blue apresenta em sua composição os precursores para a formação de dioxinas tais como o cloro e o metal catalisador sódio, cuja presença destes elementos foi comprovada por análises de superfície realizadas no couro e nas cinzas usando as técnicas de Rutherford Back-scattering Spectrometry (RBS) e Microscopia Eletrônica de Varredura (MEV). Desta forma, torna-se necessária a análise de dioxinas em cinzas de couro para especificar seu tratamento e destino final. As cinzas de couro foram obtidas numa unidade de bancada de incineração com reator de leito fixo, processo conhecido como GCC (Gaseificação e Combustão Combinadas). A metodologia utilizada para analisar dioxinas nas cinzas de couro foi baseada no Método 8280B da Agência de Proteção Ambiental dos Estados Unidos da América (EPA-USA). Este método descreve os procedimentos de extração de matrizes específicas, o clean-up para os analitos específicos e a determinação de dioxinas através das técnicas de cromatografia gasosa de alta resolução e espectrometria de massa de baixa resolução. O sucesso da análise depende da preparação dos extratos das amostras, etapa conhecida como clean-up, a qual é descrita minuciosamente neste trabalho, incluindo a montagem das colunas cromatográficas. A eficiência de extração das dioxinas foi obtida com os resultados comparativos das análises entre matrizes contaminadas com solução padrão de dioxinas e o padrão analítico. A validação deste método para análise de dioxinas policloradas em cinzas de couro wet-blue foi considerada satisfatória para os objetivos do trabalho, uma vez que a eficiência de extração de dioxinas obtida ficou dentro dos critérios estabelecidos pelo método.

Determinação das espécies de cromo nas cinzas da incineração de couro wet-blue em reatores de leito fixo e leito fluidizado

Este trabalho tem como objetivo a determinação quantitativa da concentração de cromo (III, VI e total) nas cinzas de serragem de couro wet-blue, incineradas em reatores de leito fixo nas temperaturas de 450, 550 e 650 C e reator de leito fluidizado nas temperaturas de 730, 780, 830 e 850 C, verificando se estes resultados estão dentro dos limites permitidos pelas normas ambientais brasileiras e, consequentemente, se em relação à concentração de cromo, os processos de incineração utilizados são uma maneira adequada de promover a eliminação ambientalmente aceitável da serragem de couro wet-blue. Realizou-se, neste trabalho, o estudo dos procedimentos para digestão da amostra, dos métodos analíticos quantitativos para a determinação da concentração de cromo que constatou-se depender da valência a ser analisada. As determinações de cromo total e cromo hexavalente contido nas cinzas foram realizadas após digestão ácida e digestão alcalina da amostra, respectivamente. Após o processo de digestão o cromo total (na forma de Cr (VI)) e o cromo hexavalente foram determinados por dois métodos espectrofotométricos na forma de Cr (VI) em meio ácido com difenilcarbazida (DPC) e após redução na forma de Cr (III), complexado com EDTA. O cromo total também foi determinado por volumetria empregando o método titulométrico. Este método não foi empregado na determinação de cromo hexavalente devido aos baixos teores deste nas cinzas. O teor de Cr (III) foi obtido pela diferença entre o cromo total e cromo hexavalente Procedendo-se a análise estatística dos resultados de cromo hexavalente e total nas cinzas pelos diferentes técnicas analíticas, independente do tipo de incinerador, verificou-se que não há diferenças significativas entre os mesmos. Podendo, portanto, utilizar quaisquer uma das técnicas para avaliá-los. Comparando-se os resultados das análises obtidos na incineração da serragem de couro wet-blue em reator de leito fixo e reator de leito fluidizado em diferentes temperaturas, verificou-se que no reator de leito fixo o teor de Cr (VI) nas cinzas geradas foi muito baixa, praticamente inexistente; enquanto que no reator de leito fluidizado se a temperatura de combustão não for muito alta o teor de Cr (VI) ficará dentro dos limites aceitáveis. As cinzas provenientes de qualquer um dos processos de incineração analisadas, neste trabalho, tanto do reator de leito fixo como de leito fluidizado não é conveniente que seja descartada diretamente no solo. As mesmas devem ser aproveitadas na indústria de cerâmicos, ou mesmo em algum processo que visa recuperar o cromo.

A dynamic model of simultaneous price competition with switching and search costs

Esse artigo apresenta um modelo dinâmico de competição em precos que incorpora tanto custos de procura quanto custos de switching e onde que as decisões do consumidor e das firmas são simultâneas. Dadas as hipóteses feitas n ós veremos que este modelo possui equilí brio. As principais propriedades do equil íbrio deste modelo são: Se os custos de procura forem baixos o suficiente, em equilí brio o consumidor vai procurar todas as firmas no mercado enquanto que o aumento dos custos de procura vai reduzir a propor cão de firmas que o consumidor busca. Um resultado contraintuitivo e que os pre cos esperados pagos pelo consumidor normalmente decresce em nossas computa cões numéricas do equil íbrio quando os custos de procura aumentam. Enquanto que aumentar os custos de switching tamb ém vai produzir o resultado contraituitivo que as firmas unmatched vão diminuir suas ofertas de modo a atrair o consumidor.

M-PESA mobile money: a case study in Blue ocean strategy

The recent and widespread availability of affordable mobile phone technology in developing countries has paved the way for the development of a number of mobile money and electronic remittance services. One of the most successful of these services is Safaricom’s M-PESA program, launched in the East African nation of Kenya in March 2007. Since then, the program has successfully enrolled over 15.2 million users, transferred more than US$1.4 trillion in electronic funds, and contributed significantly to poverty alleviation and financial inclusion efforts in Kenya. M-Pesa is a mobile phone based money transfer system in Kenya which grew at a blistering pace following its inception in 2007. This case study will analyze the critical factors that make M-PESA such a unique success in Kenya specifically.

Simultaneous analysis of free amino acids and biogenic amines in honey and wine samples using in loop orthophthalaldeyde derivatization procedure

This work presents a RP-HPLC method for the simultaneous quantification of free amino acids and biogenic amines in liquid food matrices and the results of the application to honey and wine samples obtained from different production processes and geographic origins. The developed methodology is based on a pre-column derivatization with o-phthaldialdehyde carried out in the sample injection loop. The compounds were separated in a Nova-Pack RP-C18 column (150 mm × 3.9 mm, 4 μm) at 35 °C. The mobile phase used was a mixture of phase A: 10 mM sodium phosphate buffer (pH 7.3), methanol and tetrahydrofuran (91:8:1); and phase B: methanol and phosphate buffer (80:20), with a flow rate of 1.0 ml/min. Fluorescence detection was used at an excitation wavelength of 335 nm and an emission wavelength of 440 nm. The separation and quantification of 19 amino acids and 6 amines was carried out in a single run as their OPA/MCE derivatives elute within 80 min, ensuring a reproducible quantification. The method showed to be adequate for the purpose, with an average RSD of 2% for the different amino acids; detection limits varying between 0.71 mg/l (Asn) and 8.26 mg/l (Lys) and recovery rates between 63.0% (Cad) and 98.0% (Asp). The amino acids present at the highest concentration in honey and wine samples were phenylalanine and arginine, respectively. Only residual levels of biogenic amines were detected in the analysed samples.

Propriedade fotoluminescente da ZrO2: Tb+3, Eu+3, Tm+3 obtida pelo método de polimerização de complexos

Recent studies are investigating a new class of inorganic materials which arise as a promising option for high performance applications in the field of photoluminescence. Highlight for rare earth (TR +3 ) doped, which have a high luminous efficiency, long decay time and being able to emit radiation in the visible range, specific to each element. In this study, we synthesized ZrO2: Tb +3 , Eu +3 , Tm +3 nanoparticles complex polymerization method (CPM). We investigated the influences caused by the heat treatment temperature and the content of dopants in zirconia photoluminescent behavior. The particles were calcined at temperature of 400, 500 and 600 ° C for two hours and ranged in concentration of dopants 1, 2, 4 and 8 mol% TR +3 . The samples were characterized by thermal analysis, X-ray diffraction, photoluminescence of measurements and uv-visible of spectroscopies. The results of X-ray diffraction confirmed the formation of the tetragonal and cubic phases in accordance with the content of dopants. The photoluminescence spectra show emission in the region corresponding simultaneous to blue (450 nm), green (550 nm) and red (615 nm). According to the results, ZrO2 particles co-doped with rare earth ions is a promising material white emission with a potential application in the field of photoluminescence

Feeding habits of the blue shark (Prionace glauca) off the coast of Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

DIET of THE BLUE MARLIN (MAKAIRA NIGRICANS, LACEPEDE 1802) (PERCIFORMES: ISTIOPHORIDAE) of THE SOUTHWESTERN EQUATORIAL ATLANTIC OCEAN.

Diet composition of the blue marlin, Makaira nigricans, from the southwestern equatorial Atlantic Ocean was analyzed between October 2004 and November 2005. In the 226 stomachs of fish ranging between 100 and 311 cm lower jaw -fork length (LJFL), 44 items were identified, including 31 fishes and 13 cephalopods. Seventy stomachs were empty (23.6 %). M. nigricans fed preferentially on heavy and muscular scombrid fishes especially upon the skipjack tuna, Katsuwonus pelamis (Linnaeus, 1758), probably to sustain their high metabolism, and on a variety of other items composed mainly by epipelagic species of fish and cephalopods.

Reproductive migration and population dynamics of the blue crab Callinectes danae in an estuary in southeastern Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)