Validating ECMWF forecasts for the occurrence of ice supersaturation using visual observations of persistent contrails and radiosonde measurements over England

One of the largest uncertainties in quantifying the impact of aviation on climate concerns the formation and spreading of persistent contrails. The inclusion of a cloud scheme that allows for ice supersaturation into the integrated forecast system (IFS) of the European Centre for Medium-Range Weather Forecasts (ECMWF) can be a useful tool to help reduce these uncertainties. This study evaluates the quality of the ECMWF forecasts with respect to ice super saturation in the upper troposphere by comparing them to visual observations of persistent contrails and radiosonde measurements of ice supersaturation over England. The performance of 1- to 3-day forecasts is compared including also the vertical accuracy of the supersaturation forecasts. It is found that the operational forecasts from the ECMWF are able to predict cold ice supersaturated regions very well. For the best cases Peirce skill scores of 0.7 are obtained, with hit rates at times exceeding 80% and false-alarm rates below 20%. Results are very similar for comparisons with visual observations and radiosonde measurements, the latter providing the better statistical significance.

What is the new medicines use review ‘patient survey’ attempting to capture in the context of existing patient satisfaction with pharmacy questionnaires and a new conceptual framework?

The community pharmacy service medicines use review (MUR) was introduced in 2005 ‘to improve patient knowledge, concordance and use of medicines’ through a private patient–pharmacist consultation. The MUR presents a fundamental change in community pharmacy service provision. While traditionally pharmacists are dispensers of medicines and providers of medicines advice, and patients as recipients, the MUR considers pharmacists providing consultation-type activities and patients as active participants. The MUR facilitates a two-way discussion about medicines use. Traditional patient–pharmacist behaviours transform into a new set of behaviours involving the booking of appointments, consultation processes and form completion, and the physical environment of the patient–pharmacist interaction moves from the traditional setting of the dispensary and medicines counter to a private consultation room. Thus, the new service challenges traditional identities and behaviours of the patient and the pharmacist as well as the environment in which the interaction takes place. In 2008, the UK government concluded there is at present too much emphasis on the quantity of MURs rather than on their quality.[1] A number of plans to remedy the perceived imbalance included a suggestion to reward ‘health outcomes’ achieved, with calls for a more focussed and scientific approach to the evaluation of pharmacy services using outcomes research. Specifically, the UK government set out the main principal research areas for the evaluation of pharmacy services to include ‘patient and public perceptions and satisfaction’as well as ‘impact on care and outcomes’. A limited number of ‘patient satisfaction with pharmacy services’ type questionnaires are available, of varying quality, measuring dimensions relating to pharmacists’ technical competence, behavioural impressions and general satisfaction. For example, an often cited paper by Larson[2] uses two factors to measure satisfaction, namely ‘friendly explanation’ and ‘managing therapy’; the factors are highly interrelated and the questions somewhat awkwardly phrased, but more importantly, we believe the questionnaire excludes some specific domains unique to the MUR. By conducting patient interviews with recent MUR recipients, we have been working to identify relevant concepts and develop a conceptual framework to inform item development for a Patient Reported Outcome Measure questionnaire bespoke to the MUR. We note with interest the recent launch of a multidisciplinary audit template by the Royal Pharmaceutical Society of Great Britain (RPSGB) in an attempt to review the effectiveness of MURs and improve their quality.[3] This template includes an MUR ‘patient survey’. We will discuss this ‘patient survey’ in light of our work and existing patient satisfaction with pharmacy questionnaires, outlining a new conceptual framework as a basis for measuring patient satisfaction with the MUR. Ethical approval for the study was obtained from the NHS Surrey Research Ethics Committee on 2 June 2008. References 1. Department of Health (2008). Pharmacy in England: Building on Strengths – Delivering the Future. London: HMSO. www. official-documents.gov.uk/document/cm73/7341/7341.pdf (accessed 29 September 2009). 2. Larson LN et al. Patient satisfaction with pharmaceutical care: update of a validated instrument. JAmPharmAssoc 2002; 42: 44–50. 3. Royal Pharmaceutical Society of Great Britain (2009). Pharmacy Medicines Use Review – Patient Audit. London: RPSGB. http:// qi4pd.org.uk/index.php/Medicines-Use-Review-Patient-Audit. html (accessed 29 September 2009).

A retrospective audit of medicines use review forms

The medicines use review (MUR) service was introduced in England and Wales in 2005 to improve patients’ knowledge and use of medicines through a private, patient–pharmacist consultation. The pharmacist completes a standard form as a record of the MUR consultation and the patient receives a copy. The 2008 White Paper, Pharmacy in England[1] notes some MURs are of poor or questionable quality and there are anecdotal reports that pharmacists elect to conduct ‘easy’ MURs with patients on a single prescribed medicine only.[2] In 2009, the Royal Pharmaceutical Society of Great Britain (RPSGB) launched a multi-disciplinary audit template to review the effectiveness of MURs and improve their quality.[3] Prior to this, we conducted a retrospective MUR audit in a 1-month period in 2008. Our aims were to report on findings from this audit and the validity of using MUR forms as data for audit.

Methodology for assessing the appropriateness of Continuing Professional Development for pharmacy professionals’ revalidation

From April 2010, the General Pharmaceutical Council (GPhC) will be responsible for the statutory regulation of pharmacists and pharmacy technicians in Great Britain (GB).[1] All statutorily regulated health professionals will need to periodically demonstrate their fitness-to-practise through a process of revalidation.[2] One option being considered in GB is that continuing professional development (CPD) records will form a part of the evidence submitted for revalidation, similar to the system in New Zealand.[3] At present, pharmacy professionals must make a minimum of nine CPD entries per annum from 1 March 2009 using the Royal Pharmaceutical Society of Great Britain (RPSGB) CPD framework. Our aim was to explore the applicability of new revalidation standards within the current CPD framework. We also wanted to review the content of CPD portfolios to assess strengths and qualities and identify any information gaps for the purpose of revalidation.

‘We are managing our own lives...’: life transitions and care in sibling-headed households affected by AIDS in Tanzania and Uganda

This paper explores the ways that young people express their agency and negotiate complex lifecourse transitions according to gender, age and inter- and intra-generational norms in sibling-headed households affected by AIDS in East Africa. Based on findings from a qualitative and participatory pilot study in Tanzania and Uganda, I examine young people's socio-spatial and temporal experiences of heading the household and caring for their siblings following their parent's/relative's death. Key dimensions of young people's caring pathways and life transitions are discussed: transitions into sibling care; the ways young people manage changing roles within the family; and the ways that young people are positioned and seek to position themselves within the community. The research reveals the relational and embodied nature of young people's life transitions over time and space. By living together independently, young people constantly reproduce and reconfigure gendered, inter- and intra-generational norms of ‘the family’, transgressing the boundaries of ‘childhood’, ‘youth’ and ‘adulthood’. Although young people take on ‘adult’ responsibilities and demonstrate their competencies in ‘managing their own lives’, this does not necessarily translate into more equal power relations with adults in the community. The research reveals the marginal ‘in-between’ place that young people occupy between local and global discourses of ‘childhood’ and ‘youth’ that construct them as ‘deviant’. Although young people adopt a range of strategies to resist marginalisation and harassment, I argue that constraints of poverty, unequal gender and generational power relations and the emotional impacts of sibling care, stigmatisation and exclusion can undermine their ability to exert agency and control over their sexual relationships, schooling, livelihood strategies and future lifecourse transitions.

Evaluation of the S(T) assimilation method with the Argo dataset

Recent observations from the Argo dataset of temperature and salinity profiles are used to evaluate a series of 3-year data assimilation experiments in a global ice–ocean general circulation model. The experiments are designed to evaluate a new data assimilation system whereby salinity is assimilated along isotherms, S(T ). In addition, the role of a balancing salinity increment to maintain water mass properties is investigated. This balancing increment is found to effectively prevent spurious mixing in tropical regions induced by univariate temperature assimilation, allowing the correction of isotherm geometries without adversely influencing temperature–salinity relationships. In addition, the balancing increment is able to correct a fresh bias associated with a weak subtropical gyre in the North Atlantic using only temperature observations. The S(T ) assimilation method is found to provide an important improvement over conventional depth level assimilation, with lower root-mean-squared forecast errors over the upper 500 m in the tropical Atlantic and Pacific Oceans. An additional set of experiments is performed whereby Argo data are withheld and used for independent evaluation. The most significant improvements from Argo assimilation are found in less well-observed regions (Indian, South Atlantic and South Pacific Oceans). When Argo salinity data are assimilated in addition to temperature, improvements to modelled temperature fields are obtained due to corrections to model density gradients and the resulting circulation. It is found that observations from the Argo array provide an invaluable tool for both correcting modelled water mass properties through data assimilation and for evaluating the assimilation methods themselves.

Doppler lidar measurements of oriented planar ice crystals falling from supercooled and glaciated layer clouds

The properties of planar ice crystals settling horizontally have been investigated using a vertically pointing Doppler lidar. Strong specular reflections were observed from their oriented basal facets, identified by comparison with a second lidar pointing 4° from zenith. Analysis of 17 months of continuous high-resolution observations reveals that these pristine crystals are frequently observed in ice falling from mid-level mixed-phase layer clouds (85% of the time for layers at −15 °C). Detailed analysis of a case study indicates that the crystals are nucleated and grow rapidly within the supercooled layer, then fall out, forming well-defined layers of specular reflection. From the lidar alone the fraction of oriented crystals cannot be quantified, but polarimetric radar measurements confirmed that a substantial fraction of the crystal population was well oriented. As the crystals fall into subsaturated air, specular reflection is observed to switch off as the crystal faces become rounded and lose their faceted structure. Specular reflection in ice falling from supercooled layers colder than −22 °C was also observed, but this was much less pronounced than at warmer temperatures: we suggest that in cold clouds it is the small droplets in the distribution that freeze into plates and produce specular reflection, whilst larger droplets freeze into complex polycrystals. The lidar Doppler measurements show that typical fall speeds for the oriented crystals are ≈ 0.3 m s−1, with a weak temperature correlation; the corresponding Reynolds number is Re ∼ 10, in agreement with light-pillar measurements. Coincident Doppler radar observations show no correlation between the specular enhancement and the eddy dissipation rate, indicating that turbulence does not control crystal orientation in these clouds. Copyright © 2010 Royal Meteorological Society

Data assimilation for marine monitoring and prediction: The MERCATOR operational assimilation systems and the MERSEA developments

During the past 15 years, a number of initiatives have been undertaken at national level to develop ocean forecasting systems operating at regional and/or global scales. The co-ordination between these efforts has been organized internationally through the Global Ocean Data Assimilation Experiment (GODAE). The French MERCATOR project is one of the leading participants in GODAE. The MERCATOR systems routinely assimilate a variety of observations such as multi-satellite altimeter data, sea-surface temperature and in situ temperature and salinity profiles, focusing on high-resolution scales of the ocean dynamics. The assimilation strategy in MERCATOR is based on a hierarchy of methods of increasing sophistication including optimal interpolation, Kalman filtering and variational methods, which are progressively deployed through the Syst`eme d’Assimilation MERCATOR (SAM) series. SAM-1 is based on a reduced-order optimal interpolation which can be operated using ‘altimetry-only’ or ‘multi-data’ set-ups; it relies on the concept of separability, assuming that the correlations can be separated into a product of horizontal and vertical contributions. The second release, SAM-2, is being developed to include new features from the singular evolutive extended Kalman (SEEK) filter, such as three-dimensional, multivariate error modes and adaptivity schemes. The third one, SAM-3, considers variational methods such as the incremental four-dimensional variational algorithm. Most operational forecasting systems evaluated during GODAE are based on least-squares statistical estimation assuming Gaussian errors. In the framework of the EU MERSEA (Marine EnviRonment and Security for the European Area) project, research is being conducted to prepare the next-generation operational ocean monitoring and forecasting systems. The research effort will explore nonlinear assimilation formulations to overcome limitations of the current systems. This paper provides an overview of the developments conducted in MERSEA with the SEEK filter, the Ensemble Kalman filter and the sequential importance re-sampling filter.

Can 4D-Var use dynamical information from targeted observations of a baroclinic structure?

Targeted observations are generally taken in regions of high baroclinicity, but often show little impact. One plausible explanation is that important dynamical information, such as upshear tilt, is not extracted from the targeted observations by the data assimilation scheme and used to correct initial condition error. This is investigated by generating pseudo targeted observations which contain a singular vector (SV) structure that is not present in the background field or routine observations, i.e. assuming that the background has an initial condition error with tilted growing structure. Experiments were performed for a single case-study with varying numbers of pseudo targeted observations. These were assimilated by the Met Office four-dimensional variational (4D-Var) data assimilation scheme, which uses a 6 h window for observations and background-error covariances calculated using the National Meteorological Centre (NMC) method. The forecasts were run using the operational Met Office Unified Model on a 24 km grid. The results presented clearly demonstrate that a 6 h window 4D-Var system is capable of extracting baroclinic information from a limited set of observations and using it to correct initial condition error. To capture the SV structure well (projection of 0.72 in total energy), 50 sondes over an area of 1×106 km2 were required. When the SV was represented by only eight sondes along an example targeting flight track covering a smaller area, the projection onto the SV structure was lower; the resulting forecast perturbations showed an SV structure with increased tilt and reduced initial energy. The total energy contained in the perturbations decreased as the SV structure was less well described by the set of observations (i.e. as fewer pseudo observations were assimilated). The assimilated perturbation had lower energy than the SV unless the pseudo observations were assimilated with the dropsonde observation errors halved from operational values. Copyright © 2010 Royal Meteorological Society

Instability of surface-temperature filaments in strain and shear

The effects of uniform straining and shearing on the stability of a surface quasi-geostrophic temperature filament are investigated. Straining is shown to stabilize perturbations for wide filaments but only for a finite time until the filament thins to a critical width, after which some perturbations can grow. No filament can be stabilized in practice, since there are perturbations that can grow large for any strain rate. The optimally growing perturbations, defined as solutions that reach a certain threshold amplitude first, are found numerically for a wide range of parameter values. The radii of the vortices formed through nonlinear roll-up are found to be proportional to θ/s, where θ is the temperature anomaly of the filament and s the strain rate, and are not dependent on the initial size of the filament. Shearing is shown to reduce the normal-mode growth rates, but it cannot stabilize them completely when there are temperature discontinuities in the basic state; smooth filaments can be stabilized completely by shearing and a simple scaling argument provides the shear rate required. Copyright © 2010 Royal Meteorological Society

Horizontal potential vorticity dipoles on the convective storm scale

The structure and dynamics of potential vorticity (PV) anomalies generated by convective storms is investigated both theoretically and in a numerical model case study. Linear theory suggests that if the storm-induced heating is on a sufficiently small scale (relative to the Rossby radius of deformation), and the environment contains moderate vertical wind shear (of order 1 m s(-1) km(-1)), then the dominant mode of a diabatically generated PV anomaly is a horizontally oriented dipole. The horizontal dipoles are typically of O(10 PVU), compared with the O(1 PVU) vertical dipoles that have been studied extensively throughout the literature. Furthermore, the horizontal PV dipoles are realized almost entirely as relative vorticity anomalies (on a time-scale of the order of tens of minutes after the heating has been turned on). The analysis of horizontal PV dipoles offers a new perspective on the vorticity dynamics of individual convective cells, implying that moist processes play a role in the maintenance of vertical vorticity in the convective storm environment.

The dynamics of a polar low assessed using potential vorticity inversion

The dynamics of a polar low are examined using a piecewise potential vorticity (PV) inversion method. In previous studies of this and other polar lows, structural evolution has been described in terms of regions of anomalous PV. In this study the relative importance of different PV anomalies and the interactions between them have been quantified using PV diagnostics. The intensification of the polar low occurred in three stages (in contrast to previous studies of polar lows that have only identified two stages). The dynamical characteristics of stages one and two are consistent with the proposed type C cyclogenesis mechanism. A diabatically-generated lower-tropospheric PV anomaly dominated intensification after initial triggering by a positive upper-level PV anomaly. A phase tilt between the upper and lower levels was maintained through retardation of the positive upper-level anomaly by the effects of latent heat release. Stage three was a period of growth dominated by wind-induced surface heat exchange (WISHE), which contributed at least 18% to the amplitude of the mature surface polar low.

A simple theoretical model for the intensification of tropical cyclones and polar lows

A simple theoretical model for the intensification of tropical cyclones and polar lows is developed using a minimal set of physical assumptions. These disturbances are assumed to be balanced systems intensifying through the WISHE (Wind-Induced Surface Heat Exchange) intensification mechanism, driven by surface fluxes of heat and moisture into an atmosphere which is neutral to moist convection. The equation set is linearized about a resting basic state and solved as an initial-value problem. A system is predicted to intensify with an exponential perturbation growth rate scaled by the radial gradient of an efficiency parameter which crudely represents the effects of unsaturated processes. The form of this efficiency parameter is assumed to be defined by initial conditions, dependent on the nature of a pre-existing vortex required to precondition the atmosphere to a state in which the vortex can intensify. Evaluation of the simple model using a primitive-equation, nonlinear numerical model provides support for the prediction of exponential perturbation growth. Good agreement is found between the simple and numerical models for the sensitivities of the measured growth rate to various parameters, including surface roughness, the rate of transfer of heat and moisture from the ocean surface, and the scale for the growing vortex.

Analysis of the eyes formed in simulated tropical cyclones and polar lows

The structure and size of the eyes generated in numerically simulated tropical cyclones and polar lows have been studied. A primitive-equation numerical model simulated systems in which the structures of the eyes formed were consistent with available observations. Whilst the tropical cyclone eyes generated were usually rapidly rotating, it appeared impossible for an eye formed in a system with a polar environment to develop this type of structure. The polar low eyes were found to be unable to warm through the subsidence of air with high values of potential temperature, as the environment was approximately statically neutral. Factors affecting the size of the eye were investigated through a series of controlled experiments. In mature tropical cyclone systems the size of the eye was insensitive to small changes in initial conditions, surface friction and latent and sensible heating from the ocean. In contrast, the eye size was strongly dependent on these parameters in the mature polar lows. Consistent with the findings, a mechanism is proposed in which the size of the eye in simulated polar lows is controlled by the strength of subsidence within it.