Obras marítimas de acostagem: o caso do porto de abrigo da Ilha do Porto Santo

O projecto e a execução de estruturas costeiras, marítimas e portuárias apresentam elavada complexidade, envolvendo a consideração de um grande número de factores e restrições e a utilização sinergética de conhecimentos oriundos de diferentes áreas do saber. Nesta dissertação, efectua-se inicialmente uma breve descrição das questões e preocupações que decorrem destas obras, bem como dos métodos de auxílio e validação dos cálculos utilizados no dimensionamento dessas estruturas, de modo a melhor aproximar o projecto à realidade, permitindo com isto antecipar e corrigir potenciais problemas. Além disso, nesta dissertação são apresentados os diferentes tipos de obras marítimas, as suas funções e os objectivos de cada uma delas, bem como os materiais utilizados e alguns dos seus métodos constructivos, descrevendo-se as diversas soluções que podem ser implementadas consoante as necessidades locais, a realidade económica existente e os materiais mais adequados a aplicar, sendo dada especial ênfase às obras marítimas de acostagem, tendo como caso de estudo a obra de recuperação do porto de abrigo da Ilha do Porto Santo, no Arquipélago da Madeira, sendo focados neste estudo os seus parâmetros essenciais, como o enquadramento climático e geográfico, os estudos preliminares e diagnósticos realizados, a caracterização da obra e da solução implementada, bem como a ordem de trabalhos e os meios necessários à sua execução. São também expostas as metodologias de cálculo das dimensões e do peso dos blocos de protecção e do enrocamento, bem como das espessuras das diferentes camadas por estes formadas, projectadas para dissipar a energia da agitação marítima, sendo ainda apresentados os resultados da aplicação de tais metodologias simplificadas de cálculo à obra de reabilitação portuária escolhida para este estudo.

Sistema de gestão de rondas: aplicação android para empresas de segurança privada

Este é um relatório submetido como requisito parcial, para obtenção de grau de mestre em Engenharia Informática pela universidade da Madeira, em parceria com o Miti (Madeira Interactive Technologies Institute) e teve como base, o desenvolvimento de uma aplicação para equipamentos móveis com sistema operativo android. O objetivo principal foi, criar uma aplicação alternativa aos atuais sistemas existentes, para gestão e controlo de inspeções de segurança, efetuadas por funcionários de empresas de segurança privada (vigilantes) a instalações de clientes, atividade denominada por rondas. O principal problema encontrado e para o qual pretendia ser encontrada uma solução, não foi a falta de um sistema deste tipo, pois existem vários no mercado, mas sim, o elevado custo de aquisição dos atuais sistemas, aliado ao facto das suas limitações em termos de funcionalidades disponibilizadas tendo em conta esse elevado custo, e ainda a utilização de um equipamento dedicado e limitado exclusivamente a essa função. Conseguiu ser encontrada uma alternativa viável, versátil e prática, que para além de ser mais users friendly (termo utilizado para aplicações desenvolvidas tendo como foco o seu utilizador), disponibiliza aos seus utilizadores uma variedade de novas funcionalidades. Trata-se de uma alternativa muito mais económica mas igualmente eficaz, cumprindo assim o seu objetivo principal. Dadas as restrições temporais para o desenvolvimento deste projeto, são dadas no final deste documento, algumas ideias para uma possível evolução deste sistema, no sentido de o tornar ainda mais inovador.

Reabilitação de pontes rodoviárias de betão armado

Cada vez mais na atualidade a reabilitação de obras de arte é de grande importância. Muitas dessas estruturas apresentam degradações e problemas estruturais consideráveis, no qual necessitam urgentemente de ações de reparação e de reforço para garantir um nível de segurança. Em Portugal só se deu uma maior importância à conservação e a reabilitação em obras de arte após a um colapso de uma ponte no concelho de Castelo de Paiva que levou à perda de vidas humanas. Este trabalho preocupa-se a dar a conhecer os vários tipos de patologias que poderão ocorrer na vida de uma ponte, desde da fase conceção e projeto até a fase de serviço, com o intuito de poder sensibilizar para futuras construções de pontes. De forma esquemática apresentam-se os diferentes tipos de inspeções, ensaios e monitorização, cujo através destes, consegue-se acompanhar o estado de conservação e o aparecimento de eventuais anomalias, que possam implicar possíveis restrições ao tráfego ou até mesmo o encerramento. De modo a poder garantir as condições de segurança e durabilidade das pontes de betão armado, ilustram-se algumas soluções e técnicas de reparação e de reforço, salientando que estas soluções e técnicas dependem da natureza e grau das anomalias, da necessidade ou não de manter a circulação de veículos e de fatores técnicos e económicos. De modo a poder exemplificar alguns aspetos importantes, nomeadamente, conservação, patologias, reparação e reforço estrutural, abordam-se duas obras de arte de Portugal Continental (um viaduto e uma ponte) que foram sujeitas a intervenções devido ao seu estado de degradação e a problemas estruturais. Por fim, apresentam-se algumas obras de arte pertencentes à Região Autónoma da Madeira (RAM) onde foram detetadas alguns problemas. Neste sentido, expõem-se algumas soluções às patologias abordadas no contacto visual, de forma a expor o conhecimento adquirido ao longo deste trabalho.

Alfabetização no cárcere: novo modelo pedagógico aplicado aos reeducandos do Presídio de Igarassu Pernambuco, Brasil

Na perspectiva de renovação dos métodos de aprendizagem, esta dissertação investiga um modelo de intervenção pedagógica com diferenciações no processo de construção do conhecimento e suas implicações na aprendizagem da alfabetização no meio prisional. Desconstruindo paradigmas da pedagogia tradicional, o programa de alfabetização carcerária MOVA-BRASIL, aplicado aos reeducandos do Presídio de Igarassu, apresenta prática pedagógica a partir das experiências prévias da turma e com interesse tanto na aprendizagem quanto na reintegração social desses apenados por meio da educação. Todo mecanismo de identificação das necessidades de aprendizagem dos alfabetizandos a partir da percepção de suas situações significativas, caracterizam o MOVA-BRASIL como modelo diferenciador de aprendizagem, inserindo-o num contexto de inovação pedagógica. Na potencialização desta prática pedagógica destaca-se a sucessiva relação desenvolvida entre educador e reeducandos como estímulo para a aprendizagem. Logo, a comunicação dialógica ganha espaço e importância numa turma que sofre dupla carência: exclusão social e educacional. O compartilhamento de conhecimentos e os relatos das necessidades, dúvidas e perspectivas da turma favorecem para a construção deste novo contexto de aprendizagem, em um ambiente repleto de restrições. Embora, os reeducandos descubram e conquistem, neste novo modelo de prática pedagógica, a liberdade a para suas ideias, pensamentos e expressões. Assim, este trabalho acende uma reflexão e evidencia a importância do papel da aprendizagem como mecanismos de libertação, emancipação e reintegração social.

O Modelo de gestão participativa do Plano Nacional do Turismo (PNT-2003/2007): a atuação do CONETUR/RN

To implement policies and plans at the tourist sector involve disposition to the establishment of parceries among government and private initiative, space to the action of studious, researchers and professionals of several areas of knowledge and formation, able of to give new courses no only at the tourism, but to the economy how a every, seen which the tourism had a effect multiplicator, reaching 52 sectors of the economy. At this sense, the Brazil came pruning for a new phase of politic actuation at the touristy activity. Until the year 2002, the tourism politic in the Brazil no had detail, because herself treated of isolated actions and many without continuity. However, at to start 2003, several actions were developed in order to contribute for the national touristy planning. The principal was the creation of Ministério do Turismo, accompanied of the formulation and implementation of the Plano Nacional do Turismo (2003/2007). This work pretend to understand the implementation at the Rio Grande do Norte of the model of participative administration extolled by Plano Nacional do Turismo. The your centre detail the action of the Conselho Estadual de Turismo do Rio Grande do Norte (CONETUR), to promote the participation at the tourism public policies. The bibliographical research contemplated diverse sources in order to compile knowledge of credential authors in the quarrel of inherent subjects to the participation and to the tourism public policies, especially at the Brazil. A qualitative perspective the case study was adapted as research method and for attainment of the data interviews with the members of the Conselho had been carried through beyond consultation the referring documents the dynamics of functioning of the Conselho. The principal actuations of the CONETUR, the directives tourism public policies already made and directed to implementation, the type of participation at made decision, the principal difficulties of the implementation of the participative administration model of the Plano Nacional do Turismo and the degree of participation of the members of the Conselho at the reunions had been identified. The results had shown that exist some difficulties at the implementation of the participation at the Conselho Estadual de Turismo do Rio Grande do Norte, knowledge of the Conselheiros of CONETUR function, the presence of bodies which doesn t directly connected at the touristy activity; the absence of time of the Conselheiros to be presents at reunions; the discontinuity of the presidency of the Conselho; among others. So, the CONETUR show himself how a Conselho with participative characteristics, but with some adapted needs.

Todo Brasileiro merece nível A : habitação multifamiliar para o programa minha casa minha vida energeticamente eficiente

This thesis describes the theoretical, methodological and programmatic proposal for a multifamily residential building located in the urban expansion area of Parnamirim/RN, inserted in the program Minha Casa Minha Vida and level of energy efficiency "A", as the RegulamentoTécnico de Qualidade (RTQ-R/INMETRO) for residential buildings. The development project initially consists of procedures as the study of theoretical, architectural programming and cases studies. With the delimitation of a field solution, situated between the reference and the context, proposals are studied to determine the solution and architectural detailing of the proposal. The architectural program was built based on the method of Problem Seeking (Peña and Parshall, 2001) and research has highlighted aspects of reducing the environmental impact and of the program Minha Casa Minha Vida , among others. The design process was characterized by the incorporation of aspects reviewed and programmed, seeking them compatible and have an economically viable building, socio-spatial quality and energy efficient. The results show that it is possible to obtain a building that meets the constraints of the program that provides housing and energy efficiency level A - and many other environmental qualities and constructive, particularly through architectural design

Simulação computacional como ferramenta de auxílio ao projeto: aplicação em edifícios naturalmente ventilados no clima de Natal/RN

Natural air ventilation is the most import passive strategy to provide thermal comfort in hot and humid climates and a significant low energy strategy. However, the natural ventilated building requires more attention with the architectural design than a conventional building with air conditioning systems, and the results are less reliable. Therefore, this thesis focuses on softwares and methods to predict the natural ventilation performance from the point of view of the architect, with limited resource and knowledge of fluid mechanics. A typical prefabricated building was modelled due to its simplified geometry, low cost and occurrence at the local campus. Firstly, the study emphasized the use of computational fluid dynamics (CFD) software, to simulate the air flow outside and inside the building. A series of approaches were developed to make the simulations possible, compromising the results fidelity. Secondly, the results of CFD simulations were used as the input of an energy tool, to simulate the thermal performance under different rates of air renew. Thirdly, the results of temperature were assessed in terms of thermal comfort. Complementary simulations were carried out to detail the analyses. The results show the potentialities of these tools. However the discussions concerning the simplifications of the approaches, the limitations of the tools and the level of knowledge of the average architect are the major contribution of this study

Avaliação da toxicidade de florações naturais e de cultura de cianobactérias: efeitos sobre Ceriodaphnia silvestri (Crustacea, Cladocera)

The incidence of toxic cyanobacterial blooms is one of the important consequences of eutrophication in aquatic ecosystems. It is a very common phenomenon in reservoirs and shrimp ponds in the State of Rio Grande do Norte (RN), Brazil. Cyanobacterias produce toxins which can affect aquatic organisms and men trough the food chain. Aiming to contribute to the studies of cyanobacterias in RN, we propose: a) to evaluate the toxicity of isolated cyanobacterias in important fresh-water environments; and b) to verify the effects of both natural and cultured blooms occurred in reservoirs for human supply and in the cladoceran Ceriodaphnia silvestrii. This study was carried out using samples of natural blooms occurred between March and October of 2004 in Gargalheiras Dam (08º L e 39º W), in July of 2004 in Armando Ribeiro Gonçalves Dam (06o S e 37o W) and in commercial shrimp ponds (Litopenaeus vannamei) located in fresh-water environments. The samples were collected with plankton net (20µm.) for identification, isolation and obtaining of phytoplanktonic biomass for liophilization and later toxicity bioassays. The toxicity of cultured samples and natural blooms was investigated through bioassays in Swiss mice. Quantification of cyanobacteria in samples was conducted following the Ütermol method, with 300mL samples fixed with lugol. The toxicity test with Ceriodaphnia silvestrii followed ABNT, 2001 recommendations, and were accomplished with natural hepatotoxic bloom s samples and cultured samples of both non-toxic and neurotoxic C. raciborskii. In this test, five newborns, aged between 6 and 24 hours, were exposed to different concentrations (0 a 800 mg.L-1) of crude cyanobacterial extracts during 24 and 48 hours. Three replicates were used per treatment. The pH, temperature and dissolved oxygen at the beginning and after 24 and 48hours from the test were measured. We estimated the CL50 through the Trimmed Spearman-Karber method. The blooms were constituted by Microcystis panniformis, M. aeruginosa, Anabaena circinalis, Cylindrospermopsis raciborskii and Planktothrix agardhii, producers of mycrocistin-LR confirmed with HPLC analysis. Samples of hepatotoxic blooms registered toxinogenic potential for C. silvestrii, with CL50-24h value of 47.48 mg.L-1 and CL5048h of 38.15 mg.L-1 for GARG samples in march/2005; CL50-24h of 113,13 mg.L-1 and CL5048h of 88,24 mg.L-1 for ARG July/2004; CL50-24h of 300.39 mg.L-1 and CL50-48h of 149.89 mg.L-1 for GARG October/2005. For cultured samples, values of CL50-24h and CL50-48h for C. raciborskii toxic strains were 228.05 and 120.28 mg.L-1, respectively. There was no mortality of C. silvestrii during the tests with non-toxic C. raciborskii strain. The toxicity test with C. silvestrii presented good sensitivity degree to cyanotoxins. The toxicity of natural hepatotoxic blooms samples (microcystins) and cultured neurotoxic saxitoxins producer samples analyzed in this study give us strong indications of that toxin s influence on the zooplanktonic community structure in tropical aquatic environments. Eleven cyanobacteria strains were isolated, representing 6 species: Anabaenopsis sp., Cylindrospermopsis raciborskii, Chroococcus sp., Microcystis panniformis, Geitlerinema unigranulatum e Planktothrix agardhii. None presented toxicity in Swiss mice. The strains were catalogued and deposited in the Laboratório de Ecologia e Toxicologia de Organismos Aquáticos (LETMA), in UFRN, and will be utilized in ecotoxicológical and ecophysiological studies, aiming to clarify the causes and control of cyanobacterial blooms in aquatic environments in RN. This state s reservoirs must receive broader attention from the authorities, considering the constant blooms occurring in waters used for human consumption

Aproveitamento de resíduos minerais na formulação de argamassas para a construção civil

Current environmental concerns include the excessive consumption and inefficient use of non-renewable natural resources. The construction industry is considered one of the largest consumers of natural raw materials, significantly contributing to the environmental degradation of the planet. The use of calcareous quarry (RPPC) and porcelain tile polishing residues (RPP) as partial replacements of the cement in mortars is an interesting alternative to minimize the exploration of considerably large amounts of natural resources. The present study aimed at investigating the properties of fresh and hardened mortars produced using residues to replace cement. The residues used were fully characterized to determine their specific mass, unitary mass, particle size distribution and morphology, and composition. The performance of the mortars was compared to that of reference compositions, prepared without residues. A total of 18 compositions were prepared, 16 using residues and 2 reference ones. The mortars were prepared using Portland CP II F 32 cement, CH I hydrated lime, river sand and tap water. The compositions of the mortars were 1:1:6 and 1:0.5:4.5 (vol%), and water to cement ratios of 1.87 and 1.45 were used, respectively. The mortars in the fresh state were evaluated by consistency index, water retention, density of mass and incorporated air content tests. In their hardened state, the mortars were evaluated by apparent mass density, modulus of elasticity, flexural tensile strength, compressive strength and water absorption by capillarity. The mortars were also analyzed by scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction and fluorescence. Finally, they were classified according to NBR 13281 standards. The mortars prepared using residues partially replacing the cement exhibited lower modulus of elasticity compared to the reference compositions, thus improving the performance in their intended use. On the downside, the water absorption by capillarity was affected by the presence of residues and both the tensile and compressive strength were reduced. However, from the overall standpoint, the replacement of cement by calcareous quarry or porcelain tile polishing residues did not result in significant changes in the properties of the mortars. Therefore, compositions containing these residues can be used in the construction industry

Estudo de massa cerâmica triaxial visando à otimização do ciclo de queima da indústria de cerâmica estrutural

Over recent years the structural ceramics industry in Brazil has found a very favorable market for growth. However, difficulties related to productivity and product quality are partially inhibiting this possible growth. An alternative for trying to solve these problems and, thus, provide the pottery industry the feasibility of full development, is the substitution of firewood used in the burning process by natural gas. In order to contribute to this process of technological innovation, this paper studies the effect of co-use of ceramic phyllite and kaolin waste on the properties of a clay matrix, verifying the possible benefits that these raw materials can give to the final product, as well as the possibility of such materials to reduce the heat load necessary to obtain products with equal or superior quality. The study was divided into two steps: characterization of materials and study of formulations. Two clays, a phyllite and a residue of kaolin were characterized by the following techniques: laser granulometry, plasticity index by Atterberg limits, X-ray fluorescence, X-ray diffraction, mineralogical composition by Rietveld, thermogravimetric and differential thermal analysis. To study the formulations, specifically for evaluation of technological properties of the parts, was performed an experimental model that combined planning involving a mixture of three components (standard mass x phyllite x kaolin waste) and a 23 factorial design with central point associated with thermal processing parameters. The experiment was performed with restricted strip-plot randomization. In total, 13 compositional points were investigated within the following constraints: phyllite ≤ 20% by weight, kaolin waste ≤ 40% by weight, and standard mass ≥ 60% by weight. The thermal parameters were used at the following levels: 750 and 950 °C to the firing temperature, 5 and 15 °C/min at the heating rate, 15 and 45min to the baseline. The results showed that the introduction of phyllite and/or kaolin waste in ceramic body produced a number of benefits in properties of the final product, such as: decreased absorption of water, apparent porosity and linear retraction at burn; besides the increase in apparent specific mass and mechanical properties of parts. The best results were obtained in the compositional points where the sum of the levels of kaolin waste and phyllite was maximal (40% by weight), as well as conditions which were used in firing temperatures of 950 °C. Regarding the prospect of savings in heat energy required to form the desired microstructure, the phyllite and the residue of kaolin, for having small particle sizes and constitutions mineralogical phases with the presence of fluxes, contributed to the optimization of the firing cycle.

Membrana de alumina anódica: comportamento da microestrutura e estudo das propriedades ópticas após tratamento térmico

Thin commercial aluminum electrolytic and passed through reactions was obtained with anodic alumina membranes nanopores. These materials have applications in areas recognized electronic, biomedical, chemical and biological weapons, especially in obtaining nanostructures using these membranes as a substrate or template for processing nanowires, nanodots and nanofibers for applications noble. Previous studies showed that the membranes that have undergone heat treatment temperature to 1300° C underwent changes in morphology, crystal structure and optical properties. This aim, this thesis, a study of the heat treatment of porous anodic alumina membranes, in order to obtain and to characterize the behavior changes structures during the crystallization process of the membranes, at temperatures ranging between 300 and 1700° C. It was therefore necessary to mount a system formed by a tubular furnace resistive alumina tube and controlled environment, applying flux with special blend of Ag-87% and 13% N2, in which argon had the role of carrying out the oxygen nitrogen system and induce the closing of the pores during the densification of the membrane. The duration of heat treatment ranged from 60 to 15 minutes, at temperatures from 300 to 1700° C respectively. With the heat treatment occurred: a drastic reduction of porosity, grain growth and increased translucency of the membrane. For the characterization of the membranes were analyzed properties: Physical - thermogravimetric, X-ray diffraction, BET surface area; morphological - SEM, EDS through compositional and, optical absorbance, and transmittance in the UV-VIS, and FTIR. The results using the SEM showed that crystallization has occurred, densification and significant changes in membrane structure, as well as obtaining microtube, the BET analysis showed a decrease in specific surface area of the membranes has to 44.381 m2.g-1 to less than 1.8 m2.g-1 and in the analysis of transmittance and absorbance was found a value of 16.5% in the range of 800 nm, characteristic of the near infrared and FTIR have confirmed the molecular groups of the material. Thus, one can say that the membranes were mixed characteristics and properties which qualify for use in gas filtration system, as well as applications in the range of optical wavelength of the infra-red, and as a substrate of nanomaterials. This requires the continuation and deepening of additional study

Nitretação em plasma com gaiola catódica: caracterização e avaliação do desempenho da camada nitretada em facas de corte

Nowadays, in the plastic industry are used mills that accomplish the recycling of residues generated in the production of its components. These mills contain cut sheets that suffer accelerated wear, once they are submitted constantly to the tribologic efforts, decreasing its useful life. To reduce this problem, it s used noble steels or takes place superficial treatments. The ionic nitriding process presents some limitations related to the uniformity of the layer in pieces with complex geometry, committing its application in pieces as knives, head offices, engagements, etc. However, the new technique of nitriding in cathodic cage eliminates some problems, as the restrictions rings, inherent to the conventional ionic nitriding. In present work, was studied the use viabilization of steels less noble, as SAE 1020, SAE 4320 and SAE 4340, nitreded by two different techniques, to substitute the AISI 01 steels, usually used in the cut knifes fabrication, seeking to reduce the costs and at the sane time to increase the useful life of these knifes. The steel most viable was the SAE 4340, nitrided in cathodic cage, because it presented uniformity in thickness and in the hardness of the layer, besides of increased 58% in the average its useful life

Uma aplicação da apredizagem por reforço na otimização da produção em um campo de petróleo

The objective of reservoir engineering is to manage fields of oil production in order to maximize the production of hydrocarbons according to economic and physical restrictions. The deciding of a production strategy is a complex activity involving several variables in the process. Thus, a smart system, which assists in the optimization of the options for developing of the field, is very useful in day-to-day of reservoir engineers. This paper proposes the development of an intelligent system to aid decision making, regarding the optimization of strategies of production in oil fields. The intelligence of this system will be implemented through the use of the technique of reinforcement learning, which is presented as a powerful tool in problems of multi-stage decision. The proposed system will allow the specialist to obtain, in time, a great alternative (or near-optimal) for the development of an oil field known

Remoção de ruídos sísmicos utilizando transformada de wavelet 1D e 2D com software em desenvolvimento

In the Hydrocarbon exploration activities, the great enigma is the location of the deposits. Great efforts are undertaken in an attempt to better identify them, locate them and at the same time, enhance cost-effectiveness relationship of extraction of oil. Seismic methods are the most widely used because they are indirect, i.e., probing the subsurface layers without invading them. Seismogram is the representation of the Earth s interior and its structures through a conveniently disposed arrangement of the data obtained by seismic reflection. A major problem in this representation is the intensity and variety of present noise in the seismogram, as the surface bearing noise that contaminates the relevant signals, and may mask the desired information, brought by waves scattered in deeper regions of the geological layers. It was developed a tool to suppress these noises based on wavelet transform 1D and 2D. The Java language program makes the separation of seismic images considering the directions (horizontal, vertical, mixed or local) and bands of wavelengths that form these images, using the Daubechies Wavelets, Auto-resolution and Tensor Product of wavelet bases. Besides, it was developed the option in a single image, using the tensor product of two-dimensional wavelets or one-wavelet tensor product by identities. In the latter case, we have the wavelet decomposition in a two dimensional signal in a single direction. This decomposition has allowed to lengthen a certain direction the two-dimensional Wavelets, correcting the effects of scales by applying Auto-resolutions. In other words, it has been improved the treatment of a seismic image using 1D wavelet and 2D wavelet at different stages of Auto-resolution. It was also implemented improvements in the display of images associated with breakdowns in each Auto-resolution, facilitating the choices of images with the signals of interest for image reconstruction without noise. The program was tested with real data and the results were good

Sistema inteligente para apoio à decisão na operação de uma malha de escoamento de petróleo

The petroleum production pipeline networks are inherently complex, usually decentralized systems. Strict operational constraints are applied in order to prevent serious problems like environmental disasters or production losses. This paper describes an intelligent system to support decisions in the operation of these networks, proposing a staggering for the pumps of transfer stations that compose them. The intelligent system is formed by blocks which interconnect to process the information and generate the suggestions to the operator. The main block of the system uses fuzzy logic to provide a control based on rules, which incorporate knowledge from experts. Tests performed in the simulation environment provided good results, indicating the applicability of the system in a real oil production environment. The use of the stagger proposed by the system allows a prioritization of the transfer in the network and a flow programming