Sprayed films of europium complexes toward light conversion devices

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Conversion between basic density and apparent density at any moisture content in Eucalyptus grandis

Wood basic density (BD) is related to other wood characteristics and its determination is important in forest inventory, though BD must be differentiated from the apparent density (AD), which relates to the moisture content (MC) of wood. The aim of this study is to demonstrate a reliable conversion from BD to AD for any MC of Eucalyptus grandis wood based on two exponential and linear models that relate volumetric shrinkage to MC. To this end, wood specimens were submitted to drying and the volumetric shrinkage was determined as a function of MC. The two models proved to be efficient in the conversion of BD to AD and vice versa.

Infrared to visible up-conversion in biocellulose yttrium vanadate nanoparticle composite membranes. Demonstration of chloroaluminum phthalocyanine light emission under up-converted light excitation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Long-term surface hardness and monomer conversion of a nonofilled and a microhybrid composite resin

Objective: This study aims to evaluate the degree of conversion (DC) and hydrolytic degradation through the Vickers hardness test (HV) of a nanofilled (Filtek™ Z-250, 3M) and a microhybrid (Filtek™Supreme-XT, 3M) composite resin. Materials and methods: Eight disk-shaped specimens (4 mm diameter × 2 mm thick, ISO 4049) of each material were prepared for each test. Composites were inserted into single increment in a metallic matrix and light-cured for 40 seconds. VH readings were performed for each specimen at predetermined intervals: immediately after polymerization (control), 1, 2, 3, 7, 14, 21, 30 and 180 days. After curing, initial hardness measurements were performed and the specimens were immersed in artificial saliva at 37°C. For DC (%), specimens were ground, pressed with KBr and analyzed by FT-IR spectrophotometer. Results: Student t-test showed that there was no difference between the resins for DC (p = 0.252). ANOVA analysis revealed that Z-250 VH means were all greater than S-XT, for both top and bottom surfaces, whatever the storage-period in artificial saliva (p < 0.001). After 180 days of storage, the hardness obtained for S-XT was similar with that at the baseline, for both top and bottom surfaces. While for Z-250 hardness was not significantly different from baseline only for top surface, but there was a significant decrease observed in hardness for bottom surface. Conclusion: The materials tested showed no evidence of hydrolytic degradation in a significant way, in a 6-month storagetime in artificial saliva. Nanofilled resin presents a monomer conversion comparable to the conventional microhybrid.

Degree of conversion of different composite resins photo-activated with light-emitting diode and argon ion laser

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Greenhouse gas balance in the conversion from extensive pasture to other agricultural systems in Andean region of Colombia

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

O reino Visigodo: catolicismo e permanências pagãs

What became accustomed to call “paganism” is undoubtedly one of the most significant forms of what is designated as “popular religiosity”. This expression, which seems useful when a generalization is required, shows all its weakness when a more precise and objective observation of a particular religion is attempted. Would the official visigothic kingdom’s “conversion” to Catholicism, with Recardo (586-601) at the Council of Toledo of 589 have effectively matched to the “conversion” of this kingdom’s population? Firstly, it is necessary to consider, in beyond the exalting intentions of the sources of that moment, that mass conversions do not imply a radical change in the convictions and religious practices of an entire people. Secondly, that “conversion” and “Christianization” are not synonymous. “Religiosity”, which includes the “conversion”, implies a fundamental religious attitude, which can simply be interior and personal. On the other hand, “religion”, in which “Christianization” is included, would correspond to a public aspect, institutionalized, which elaborates a set of techniques aiming, as in the case of “religiosity”, the guarantee of the supernatural Thus, elevated to the position of “official religion,” Catholic Christianity would live with a series of rites, rituals, devotions, from the previous “religiosity” that, through its ecclesiastical perspective, would be reprehensible, considered marginal and something that would lead to error. However, on the eve of the Muslim invasion in 711, not only among the laity but even in ecclesiastical segments, the manifestations of the “paganism” still were aim of coactive condemnation in the Catholic kingdom of Toledo’s councils.

The effect of polymerization mode on monomer conversion, free radical entrapment, and interaction with hydroxyapatite of commercial self-adhesive cements

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Bio-energy conversion cost: a new index to evaluate the bioeconomic eficiency

This study evaluated a nonlinear programming excel workbook PPFR (http://www.fmva.unesp.br/ppfr) for determining the optimum nutrient density and maximize margins. Two experiments were conducted with 240 one-day-old female chicks and 240 one-day-old male chicks distributed in 48 pens (10 chicks per pen, 4 replicates) in a completely randomized design. The treatments include the average price history (2009s and 2010s) for broiler increased and decreased by 25% or 50% (5 treatments to nonlinear feed formulation) and 1 linear feed formulation. Body gain, feed intake, feed conversion were measured at 21, 42 and 56 d of age. Chicks had ad libitum access to feed and water in floor pens with wood shavings as litter. The bio-economic Energy Conversion [BEC= (Total energy intake*Feed weighted cost per kg)/ (Weight gain*kg live chicken cost)] was more sensitive for measuring the bio-economic performance for broilers, and especially with better magnitude. This allowed a better assessment of profitability, the rate of growth and not just energy consumption, the production of broilers, by incorporating energy consumption, allowing for more sensitivity to the new index (BEC). The BEC was demonstrated that the principle of nonlinear formulation minimizes losses significantly (P<0.05), especially under unfavorable conditions the price of chicken in the market. Thus, when considering that a diet of energy supply shows up as the most expensive item of a formulation, it should compose necessarily the formula proposed for a bio-economic index. Thus, there is need to evaluate more accurately, not only the ingredients of a ration, but the impact of nutrients on the stability of a solution, mainly due to the energy requirement. This strategy promotes better accuracy for decision making under conditions of uncertainty, to find alternative post-formulation. From the above, both weight gain and feed conversion, as traditional performance indicators, cannot finalize or predict a performance evaluation of an economic system creating increasingly intense and competitive. Thus, the energy concentration of the diet becomes more important definition to feed formulator, by directly impact profit activity by interactions with the density of nutrients. This allowed a better evaluation of profitability, the rate of energy performance for broilers, by incorporating the energy consumption formula, allowing more sensitivity to the new index (BEC). These data show that nonlinear feed formulation is a toll to offer new opportunities for poultry production to improved profitability.

Effect of different light sources on degree of conversion, hardness and plasticization of a composite

Clinical performance of composite resins depends largely on their mechanical properties,and those are influenced by several factors,such as the light-curing mode. The purpose of this study was to evaluate the influence of different light sources on degree of conversion(DC), Knoop hardness(KHN) and plasticization(P) of a composite resin. Disc-shaped specimens (5 x 2 mm) of Esthet-X(Dentsply) methacrylate-based microhybrid composite were light-cured using quartz-tungsten-halogen (QTH) Optilight Plus(Gnatus) or light-emitting diode(LED) Ultraled(Dabi Atlante) curing units at 400 and 340 mW/cm2 of irradiance, respectively. After 24 h, absorption spectra of composite were obtained using Nexus 670(Nicolet)FT-IR spectrometer in order to calculate the DC.The KHN was measured in the HMV-2000(Shimadzu) microhardness tester under 50 g loads for 15 s, and P was evaluated by percentage reductio of hardness after 24 h of alcohol storage. Data were subjected to t-Student test(alpha=0.05).QTH device showed lower P and higher KHN$ than LED (p<0.05), and no difference between the light-curing units was found for DC (p>0.05). The halogen-curing unit with higher irradiance promoted higher KHN and lower softening in alcohol than LED.

Carbon content in Amazonian Oxisols after forest conversion to pasture

O solo desempenha importante papel no ciclo do C, porém a substituição da floresta tropical por áreas cultivadas altera a dinâmica e o estoque desse elemento. Em uma frente pioneira de colonização no município de Itupiranga (PA), na Amazônia Oriental, foi desenvolvido este estudo com o objetivo de avaliar as consequências da substituição de floresta nativa por pastagens de Brachiaria brizantha no conteúdo de C de um Latossolo Amarelo distrófico. As amostras de solo foram coletadas em área de floresta nativa (FN), floresta secundária de 8–10 anos (FS), pastagens de 1–2 anos (P1-2), de 5–7 anos (P5–7) e de 10–12 anos (P10–12), nas camadas de 0–2, 2–5 e 5–10 cm, para avaliar os teores e o estoque de C e realizar um fracionamento granulométrico da matéria orgânica. Após o desmatamento, a densidade do solo aumentou até a profundidade de 5 cm, sendo esse aumento maior nas pastagens mais antigas. As maiores mudanças no conteúdo de C ocorreram na camada superior do solo, havendo aumento nesse conteúdo com o tempo de implantação das pastagens. Nas camadas de 2–5 e 5–10 cm, o conteúdo de C se mostrou estável entre os tipos de cobertura vegetal avaliados. As maiores concentrações de C foram encontradas na fração silte, mas os maiores conteúdos de C ocorreram na fração argila, independentemente do tipo de cobertura vegetal. Um aumento da quantidade de C associado à fração areia, na forma de resíduos orgânicos pouco decompostos, foi observado nas pastagens, confirmando a maior sensibilidade dessa fração às mudanças de uso do solo.