Hidrólise e caracterização de poliacrilamida hidrofobicamente modificada: avaliação da aplicabilidade na recuperação de petróleo

The hydrolysis reaction in alkaline conditions of the commercial polymer poly(acrylamide-co-metacrylate of 3,5,5-trimethyl-hexane) called HAPAM, containing 0.75 % of hydrophobic groups, was carried out in 0.1 M NaCl and 0.25M NaOH solutions, varying the temperature and reaction time. The polymers were characterized by 1H and 13C Nuclear Magnetic Resonance (NMR), Elemental Analysis and Size Exclusion Chromatography (SEC). The values of the hydrolysis degree were obtained by 13C NMR. The viscosity of HAPAM and HAPAM-10N-R solutions was evaluated as a function of shear rate, ionic strength and temperature. At high polymer concentration (Cp), the viscosity of HAPAM solutions increased with the ionic strength and decreased with the temperature. The viscosity of HAPAM-10N-R solutions increased significantly in distilled water, due to repulsions between the carboxylate groups. At high Cp, with the increase of ionic strength and temperature, occurred a decrease of viscosity, due to mainly the high hydrolysis degree and the low amount of hydrophobic groups. These results indicated that the studied polymers have properties more suitable for the application in Enhanced Oil Recovery (EOR) in low salinity and moderate temperature reservoirs

Remediação de solos contaminados com diesel por lavagem com solução de tensoativos

Combating pollution of soils is a challenge that has concerned researchers from different areas and motivated the search for technologies that aim the recovery of degraded soils. Literature shows numerous processes that have been proposed with the intent of remediating soils contaminated by oils and other by-products of the oil industry, considering that the processes available have, generally, high operating costs, this work proposes a costeffective alternative to the treatment of Diesel-contaminated soils. The washing solutions were prepared using water as aqueous phase, the saponified coconut oil (OCS) as surfactant and n-butanol as co-surfactant. In this study, the soil was characterized by physical and chemical analyses. The study of diesel desorption from the soil was held in bath, using hexane and washing solutions, which had 10 and 20 wt.% active matter (AM - co-surfactant/surfactants) respectively. The study of the influence of active matter concentration and temperature in bath agitated used an experimental planning. The experiment also developed a system of percolation in bed to wash the soil and studied the influence of the concentration of active substance and volume of washing solution using an experimental planning. The optimal times to achieve hexane extraction were 30 and 180 min, while the best results using a 10% AM was 60 min and using a 20% AM was 120 min. The results of the experimental planning on bath showed that the maximum diesel removal was obtained when at a 20 wt.% of AM and under 50 °C, removing 99.92% of the oil. As for experiments in the system of percolation soil bed, the maximum diesel removal was high when the volume of the washing solution was of 5 L and the concentration of 20% AM. This experiment concluded that the concentration of AM and the temperature were vital to bath experiments for diesel removal, while in the system of percolation soil bed only concentration of AM influenced the soil remediation

Influência da acrilamida e da poliacrilamida em sistema microemulsionado visando aplicação na recuperação avançada de petróleo

This work aims to study the influence of two additives, the monomer, acrylamide and its polymer, polyacrylamide, solubilized in microemulsion systems and applied on enhanced oil recovery. By the microemulsion system obtained, it was chosen points into the phase diagram, presenting these compositions: 25%, 30%, 35% C/T; 2% Fo (fixed for all points) e 73%, 68% e 63% Fa, respectively. However, the monomer and the polymer were solubilized in these microemulsion points with 0.1%; 0.5%; 1% e 2% of concentration, ordering to check the concentration influence at the physicochemical properties (surface tension and rheology) of the microemulsion. Through the salinity study, was possible to observe that the concentrations of 1% and 2% of polymer made the solution became blurred, accordingly, the study of surface tension and rheology only was made for the concentrations of 0.1% e 0.5% of monomer and polymer, respectively. By the surface tension study it was observed that how the concentration of active matter (C/T) was increasing the surface tension was amending for each system, with or without additives. In the rheology study, as it increases the concentration of active matter increases both the viscosity of the microemulsion system (SME) with no additive, as the SME with polymer (AD2). After the entire study, it was chosen the lower point of active matter (25% C/T; 2% Fo e 73% Fa), plus additives in concentrations of 0.1% and 0.5% to be used on enhanced oil recovery. Assays were made on sandstone from Botucatu Formation, where after the tests, it was concluded that among the studied points, the point who showed the best efficiency of advanced shift was the microemulsion system + 0.5% AD2, with a recovery of 28% of oil in place and a total of 96,49%, while the other solution with 0.5% of polymer presented the worst result, with 14.1% of oil in place and 67,39% of efficiency of total displacement

Novas formulações de fluidos de corte: otimização, propriedades e recuperação do óleo usado

Cutting fluids are lubricants used in metal-mechanical industries. Their complex composition varies according to the type of operation carried out, also depending on the metals under treatment or investigation. Due to the high amount of mineral oil produced in Northeastern Brazil, we have detected the need to better use this class of material. In this work, two novel formulations have been tested, both based on naphthenic mineral oil and additives, such as: an emulsifying agent (A), an anticorrosion agent (B), a biocide (C) and an antifoam agent (D). Each formulation was prepared by mixing the additives in the mineral oil at a 700-rpm stirring velocity for 10 min, at 25°C, employing a 24 factorial planning. The formulations were characterized by means of density, total acid number (TAN), viscosity, flash point and anticorrosion activity. In a subsequent study, oil-in-water emulsions were prepared from these novel formulations. The emulsions were analyzed in terms of stability, corrosion degree, percentage of foam formation, conductivity, accelerated stability and particle size. The samples were appropriately labeled, and, in special, two of them were selected for featuring emulsion properties which were closer to those of the standards chosen as references (commercial cutting oils). Investigations were undertaken on the ability of NaCl and CaCl2 to destabilize the emulsions, at concentrations of 2%, 5% and 10%, at an 800-rpm stirring velocity for 5 min and temperatures of 25º, 40º, 50º and 60ºC. The recovered oils were chemically altered by reincorporating the same additives used in the original formulations, followed by preparation of emulsions with the same concentrations as those of the initial ones. The purpose was to assess the possibility of reusing the recovered oil. The effluents generated during the emulsion destabilization step were characterized via turbidity index, contents of oil and grease, pH, and contents of anions and cations, observing compliance with the parameters established by the current environmental legislation (Brazil s CONAMA 357/05 resolution). It could be concluded that the formulations presented excellent physicochemical properties as compared to commercial cutting fluids, showing that the quality of the newly-prepared fluids is superior to that of the formulations available in the market, enabling technically and environmentally-safe applications

Estudo teórico aplicado ao petróleo: estabilidade dos alcenos e recuperação terciária

The present work aims to study the theoretical level of some processes employed in the refining of petroleum fractions and tertiary recovery of this fluid. In the third chapter, we investigate a method of hydrogenation of oil fractions by QTAIM (Quantum Theory of Atoms in Molecules) and thermodynamic parameters. The study of hydrogenation reactions, and the stability of the products formed, is directly related to product improvement in the petrochemical refining. In the fourth chapter, we study the theoretical level of intermolecular interactions that occur in the process of tertiary oil recovery, or competitive interactions involving molecules of non-ionic surfactants, oil and quartz rock where oil is accumulated. Calculations were developed using the semiempirical PM3 method (Parametric Model 3). We studied a set of ten non-ionic surfactants, natural and synthetic origin. The study of rock-surfactant interactions was performed on the surface of the quartz (001) completely hydroxylated. Results were obtained energetic and geometric orientations of various surfactants on quartz. QTAIM was obtained through the analysis of the electron density of interactions, and thus, providing details about the formation of hydrogen bonds and hydrogen-hydrogen systems studied. The results show that the adsorption of ethoxylated surfactants in the rock surface occurs through the hydrogen bonding of the type CH---O, and surfactants derivatives of polyols occurs by OH---O bonds. For structures adsorption studied, the large distance of the surfactant to the surface together with the low values of charge density, indicate that there is a very low interaction, characterizing physical adsorption in all surfactants studied. We demonstrated that surfactants with polar group comprising oxyethylene units, showed the lowest adsorption onto the surface of quartz, unlike the derivatives of polyols

Densidade do solo e infiltração de água como indicadores da qualidade física de um Latossolo Vermelho distrófico em recuperação

A necessidade cada vez maior de alimentos, espaço e condições para sobrevivência faz com que as interferências antrópicas no ambiente sejam cada vez maiores. Solos intensivamente cultivados e de forma inadequada são degradados, assim como a construção de obras civis no meio rural sem atender à legislação pertinente tudo isso tem ocasionado problemas ao meio. Várias técnicas têm sido utilizadas para recuperar esses solos, sendo a principal delas a adição de MO. Contudo, informações sobre tempo para recuperação do solo, influência dos tipos de material orgânico e indicadores das alterações ainda são escassas. Este trabalho objetivou avaliar a recuperação das propriedades de um Latossolo Vermelho distrófico, de onde foi retirado material usado na terraplanagem e nas fundações da usina hidrelétrica de Ilha Solteira-SP, utilizando-se como indicadores de qualidade física a densidade do solo e a taxa de infiltração de água. A pesquisa foi feita em uma área onde se retirou uma camada de solo de 8,60 m. O delineamento experimental foi em blocos casualizados, com cinco repetições e cinco tratamentos: testemunha (solo exposto sem técnicas de recuperação); espécie arbórea gonçalo-alves (Astronium fraxinifolium Schott); gonçalo-alves + feijão-de-porco (Canavalia ensiformis); gonçalo-alves + nabo forrageiro (Raphanus sativus); e gonçalo-alves + gramínea (Brachiaria decumbens) + lodo de esgoto (60 Mg ha-1). A densidade do solo foi avaliada antes e 356 dias após a implantação dos tratamentos, e a infiltração de água no solo foi determinada 188 dias depois da instalação dos tratamentos. Concluiu-se que ocorrem melhorias na qualidade do solo quando efetuado o seu preparo e a adição de lodo de esgoto e adubos verdes. A densidade do solo e a infiltração de água do solo são bons indicadores na avaliação dessas melhorias. As diferentes fontes de MO adicionadas ao solo e a ação do preparo deste interagem de maneira semelhante na recuperação da sua qualidade, porém a combinação lodo de esgoto mais braquiária proporciona maior altura de planta da espécie gonçalo-alves.

Período de recuperação do investimento em bomba hidráulica de melhor rendimento em sistemas de bombeamento na tarifa horossazonal verde

Neste trabalho, ajustou-se um modelo matemático para quantificar o efeito da variação do rendimento da bomba hidráulica na variação dos custos de um sistema de bombeamento, na estrutura tarifária horossazonal verde (subgrupo A4) e o tempo de recuperação do capital investido no equipamento de maior rendimento. em seguida, o mesmo foi aplicado a um sistema de bombeamento para suprimento de um sistema de irrigação do tipo pivô central. As opções de rendimento da bomba hidráulica foram: 69,5% (bomba 1), 73% (bomba 2) e 78% (bomba 3), cujos custos de aquisição foram, respectivamente, R$ 6.176,00, R$ 8.479,00 e R$ 15.509,00. Os resultados da aplicação do modelo mostraram que: i) a substituição da bomba 1 pela bomba 2 foi viável, sendo o período de recuperação de capital 3,4 anos; ii) a substituição da bomba 1 pela bomba 3 foi viável, sendo o período de recuperação de capital 9,2 anos; iii) a substituição da bomba 2 pela bomba 3 foi inviável, sendo o período de recuperação de capital 21,1 anos superior ao período de amortização do investimento na avaliação econômica, considerado 15 anos.

Recuperação em área de empréstimo usada para construção de usina hidrelétrica

The recovery of native area used in hydroelectric power station construction is a slow process, and it requires the use of covering plant as a source of organic matter, application of nutrients and amendments as soil conditioner. Thus, this study has the objective to study the recovery of physical attribute of subsoil in a distrophic Red Latosol, used in the embankment and foundation of Hydroelectric Power Station, Ilha Solteira, São Paulo, Brazil. The design used was randomized blocks with eight treatments and four replications. The research started in 1992. The treatments consisted of green manure, pasture and soil amendment. After 13 years, total porosity, macroporosity, microporosity, bulk density, aggregate stability, resistance to penetration, organic matter of soil and dry matter of pasture production were evaluated. The adopted treatments are slowly contributing towards recovery of physical attributes of exposed subsoil. The effects of the soil recovery are reaching 0-0.10 m depth.

O uso de linguagem documentária em catálogos coletivos de bibliotecas universitárias: um estudo de avaliação sociocognitiva com protocolo verbal

Avaliou-se o uso de linguagem documentária alfabética de catálogos coletivos, na perspectiva das bibliotecas universitárias e no contexto sociocognitivo dos indexadores e dos usuários. Concluiu-se que o uso adequado de linguagens documentárias de áreas científicas especializadas faz-se por meio da avaliação quanto à atualização, especificidade e compatibilidade para atender às necessidades de indexação e recuperação da informação.

Geração de testes a partir de gramáticas: áreas de aplicação

The work proposed by Cleverton Hentz (2010) presented an approach to define tests from the formal description of a program s input. Since some programs, such as compilers, may have their inputs formalized through grammars, it is common to use context-free grammars to specify the set of its valid entries. In the original work the author developed a tool that automatically generates tests for compilers. In the present work we identify types of problems in various areas where grammars are used to describe them , for example, to specify software configurations, which are potential situations to use LGen. In addition, we conducted case studies with grammars of different domains and from these studies it was possible to evaluate the behavior and performance of LGen during the generation of sentences, evaluating aspects such as execution time, number of generated sentences and satisfaction of coverage criteria available in LGen

Detecção e recuperação de falhas para a máquina de redução de grafos PEWS-AM

Web services are software units that allow access to one or more resources, supporting the deployment of business processes in the Web. They use well-defined interfaces, using web standard protocols, making possible the communication between entities implemented on different platforms. Due to these features, Web services can be integrated as services compositions to form more robust loose coupling applications. Web services are subject to failures, unwanted situations that may compromise the business process partially or completely. Failures can occur both in the design of compositions as in the execution of compositions. As a result, it is essential to create mechanisms to make the implementation of service compositions more robust and to treat failures. Specifically, we propose the support for fault recovery in service compositions described in PEWS language and executed on PEWS-AM, an graph reduction machine. To support recovery failure on PEWS-AM, we extend the PEWS language specification and adapted the rules of translation and reduction of graphs for this machine. These contributions were made both in the model of abstract machine as at the implementation level

Diversidade de Seirini (Collembola, Arthropleona, Entomobryidae), em áreas úmidas da caatinga

The family Entomobryidae is one of the most diverse families of Collembola in Northeast Brazil. Data on its diversity may be considered undervalued due to low collection efforts in the region. In this study, five areas in the Northeast region were sampled, to evaluate the species richness of this family. The study was done in the Serra da Jibóia, Santa Terezinha municipality, Bahia; Serra das Confusões, Caracol municipality, Piauí; Chapada do Araripe, Crato municipality, Ceará; Mata do Pau-Ferro, Areia municipality, Paraíba and Parque Nacional de Ubajara, Ubajara municipality, Ceará, all considered humid areas of Caatinga. Collections were made using pitfall traps and entomological aspirators. All the collected material was screened, mounted on slides, identified and, finally, the descriptions of some of the new species encountered were made. A total of 48 Entomobryidae species belonging to nine genera were recorded and 27 of these were new to science, representing a percentage of 56.25% of the total. A new record for Brazil was identified and several new records were made to the States. Seira was the genus with wider distribution and it was the only one found in all areas and the most representative with the highest number of recorded species (26). This result was expected, because individuals of the genus Seira have a good adaptability to semi-arid environments, a fact that has already been proven in previous research. Seven new species of Seira were described. A dichotomous key to genera and species of Seirini from Brazil was drafted. This work demonstrates the great potential of Entomobryidae and Seirini in the Northeast, despite having been held in very restricted areas, obtained important results for the knowledge of fauna of the group

O Gênero Cyathus haller: pers. (Agaricales, Basidiomycota) em áreas de caatinga do Nordeste brasileiro

Fungi of the family Nidulariaceae or bird s nest fungi present a vase-shaped basidiomata with the wall surface smooth or striated lengthwise and internal structures resembling small bird eggs in a nest, the peridioles. Among the five genera that comprise the group, the more representative is Cyathus Haller: Pers. The Brazilian Northeast region shows major importance for the world s diversity by containing a Brazilian unique and exclusively phytoecological domain, the Caatinga, which lacks particular attention regarding macrofungi. Although the gradual growth of knowledge in recent years, studies are still insipient in the Caatinga domain. Between their various vegetal formations are the Brejos de Altitude , described as islands with moist perennial vegetation, low soil fertility and annual precipitation of 900 1.300 mm. This study aimed to evaluate the taxonomic richness of Nidulariaceae fungi in Caatinga s areas of Northeastern Brazil, describing and identifying species, as well as expanding the collection of Herbarium UFRN Fungos. For description of Nidulariaceae fungi was followed the proposed by specialized literature in the group. We have found and described 10 species of the genus Cyathus, namely: C. earlei Lloyd, C. gayanus Tul. & C. Tul., C. gracilis H.J. Brodie, C. intermedius (Mont.) Tul. & C. Tul., C. limbatus Tul. & C. Tul., C. montagnei Tul. & C. Tul., C. pallidus Berk. & M.A. Curtis, C. poeppigii Tul. & C. Tul., C. striatus (Huds.) Willd. and C. tríplex Lloyd. Beyond these have been described four new species to science: Cyathus calvescens R. Cruz & Baseia sp. nov., C. hortum R. Cruz & Baseia sp. nov., C. magnomuralis R. Cruz & Baseia sp. nov. and C. parvocinereus R. Cruz & Baseia sp. nov. Two samples were identified only to genus level. No member of Mycocalia J.T. Palmer, Nidula V.S. White, Nidularia Fr. and Crucibulum Tul. & C. Tul. has been found, however the results were extremely valuable for being an unprecedented work in Caatinga, and importante tool for implementation of conservation projects and sustainable utilization of this domain

Diversidade de paronellidae (collembola, arthropleona, entomobryoidea) no nordeste brasileiro, com ênfase em áreas úmidas da caatinga

Paronellidae is among the most diverse and distinctive components of epiedaphic Collembola in tropical countries. However, only 15 species of the family were recorded in Brazil, and only two of them were record in northeast region of the country. This condiction is clearly related to low sampling efforts and lack of specialists working with the group. Due to this reality, this work aimed to study the Paronellidae fauna, under a taxonomic point of view, in six distinct environments in Northeastern Brazil (from Alagoas, Bahia, Ceará, Piauí and Paraíba states), five areas of Caatinga and one from Atlantic Rain Forest biome. Collections were made during the rainy season on each area. The specimens were analyzed under stereomicroscope and mounted in glass slides for microscopy. The specimens identified as Paronellidae had their occurrence recorded and five new species were described. An identification key to the brazilian genera of the family was also prepared. Twelve species of Paronellidae were recorded for the first time to Brazil: Campylothorax mitrai; Lepidonella. sp. nov. 1; Lepidonella sp. nov. 2, Lepidonella sp. nov. 3, Lepidonella sp. nov 4, Lepidonella sp. nov. 5; Dicranocentruga sp. Nov. 1; Dicranocentruga sp. Nov. 2; Dicranocentruga sp. Nov. 3; Paronella sp. nov.1; Serroderus sp. nov.1 and Trogolaphysa. sp. 1, where C. mitrai, Lepidonella. sp. nov 1, Dicranocentruga sp. nov 1, Dicranocentruga sp. nov 2 and Dicranocentruga sp. nov 3 were described. Serroderus and Dicranocentruga genera were recorded for the first time to Brazil. The description of Lepidonella sp. nov 1 also represents the first description of a species of the genus for the country. The data presented show a high potential species richness to Paronellidae, not only in the northeast region, but as in Brazil. In fact, with the records presented in this work, the number of recorded species of Paronellidae in the country increased by 80%. The study of this particular fauna may direct environmental conservation policies, especially in areas of Caatinga

Fungos gasteroides (Basidiomycota, Agaricomycetes) de três áreas de semiárido no Estado do Ceará, Brasil

Gasteroid fungi include several distinct lineages of basidiomycetes that were grouped by presenting some striking features in common like angiocarpic development and passive release of basidiospores. For a long period these fungi were accomodate in Gasteromycetes class. However, biochemistry and molecular studies showed the polyphyly of this group and curriently this class lies devoid of taxonomic value. These organisms influence the ecology of the various biomes, however, are poorly studied and knowledge of their diversity in neotropical ecosystems remains insufficient, despite studies that have been developed in recent years. The Brazilian semiarid region has many areas with an unexplored mycobiota. Ceará State has many areas of extreme biological importance and for this study three protected areas were chosen: Área de Proteção Ambiental da Serra da Ibiapaba, Parque Nacional de Ubajara and Área de Proteção Ambiental de Baturité. Therefore, the aim of this study was to inventory gasteroid fungi ocorring in these three areas in the semiarid region of Ceará. The expeditions, herborization and analysis of specimes were based in traditional methodology used to identify gasteroid fungi. Were identified 16 species belong to 5 families: Agaricaceae, Clathraceae, Geastraceae, Nidulariceae and Phallaceae. Morganella nuda Alfredo & Baseia is recorded for the second time in the world, Blumenavia angolensis (Welw. & Curr) Dring and Mutinus elegans (Mont.) E. Fisch. corresponds to a first record in the Brazilian Northeastern. Except for Abrachium floriforme (Baseia & Calonge) Baseia & T.S. Cabral and Geastrum lloydianum Rick, all remaining species are new records for Ceará, increasing the list of gasteroid fungi in the region of 3 for 17 species. Identified species were deposited in the collection of the Herbarium of Universidade Federal do Rio Grande do Norte. Although these areas have proved conducive to the study of gasteroid fungi, more efforts are still needed to increase knowledge of these fungi in the region