ECOLOGY AND BEHAVIOR OF WILD BLACK-CRESTED GIBBONS (HYLOBATES-CONCOLOR) IN CHINA WITH A RECONSIDERATION OF EVIDENCE FOR POLYGYNY

The black-crested gibbon, Hylobates concolor, is one of the few species of gibbons that has not yet been the subject of a long term field study. Field observations in the Ai Lao and Wu Liang Mountains of Yunnan Province, China indicate that in this area the habitat and ecology of this species differ markedly from those of other gibbons that have been studied to date. These differences are correlated with some behavioral differences. In particular, these gibbons apparently have greater day ranges than other gibbons. It has also been suggested that this species lives in polygynous groups. To demonstrate this requires observation of groups with two or more females with young. Our own observations and those from other recent studies suggest that there are alternative explanations consistent with available data.

The decline and impending extinction of the South China tiger

The South China tiger Panthera tigris amoyensis is the rarest of the five living tiger subspecies, the most critically threatened and the closest to extinction. No wild South China tigers have been seen by officials for 25 years and one was last brought into captivity 27 years ago. The 19 reserves listed by the Chinese Ministry of Forestry within the presumed range of the tiger are spatially fragmented and most are too small to support viable tiger populations. Over the last 40 years wild populations have declined from thousands to a scattered few. Despite its plight and occasional anecdotal reports of sightings by local people, no intensive field study has been conducted on this tiger subspecies and its habitat. The captive population of about 50 tigers, derived from six wild-caught founders, is genetically impoverished with low reproductive output. Given the size and fragmentation of potential tiger habitat, saving what remains of the captive population may be the only option left to prevent extinction of this tiger subspecies, and even this option is becoming increasingly less probable. This precarious dilemma demands that conservation priorities be re-evaluated and action taken immediately to decide if recovery of the wild population will be possible.

Social organization and range use in the Yunnan snub-nosed monkey Rhinopithecus bieti

We studied social organization, behavior, and range use of the Yunnan snub-nosed monkey (Rhinopithecus bieti) at Wuyapiya (99 degrees 12'E, 28 degrees 30'N, the People's Republic of China) over 12 months between May 1992 and June 1994. The Wuyapiya band contained greater than or equal to 175 members and had two levels of social organization. At one level, the monkeys formed multifemale, one-male units (OMUs) similar to those of many other colobines. At another level, 15 to 18 OMUs traveled together in a cohesive band. Unlike the bands of other species of Rhinopithecus, the Wuyapiya band of R. bieti did not show seasonal fission-fusion, although some social behavior, such as male-male aggression, was seasonal. With regard to range use, the Wuyapiya band had a large home range and long daily travel distances compared with other colobines. Minimum range size in 1 year at Wuyapiya is 16.25 km(2), although there is no asymptote for range size as a function of observation time. Range size for the Wuyapiya band is 25.25 km(2) over the 2-year study and appeared to cover 100 km(2) between 1985 and 1994. The primary food of R. bieti at Wuyapiya is lichens, which are ubiquitous in fir frees. The multitiered social organization of R. bieti appears to result from the interaction of food resource characters with the forces of mate competition, with band sizes based on female responses to the spatial and temporal characteristics of lichens and subdivisions within bands based on male competition for mates.

The reproductive strategies of an endemic Tibetan fish, Gymnocypris selincuoensis

The reproductive traits of Gymnocypris selincuoensis from Selincuo Lake and its tributaries were investigated in 1997 and 1998. The youngest mature male was age 7 with a standard length (SL) of 172.0 mm, and the youngest mature female was age 8 with a SL of 194.0 mm. The L(50)s Of SL and age at first maturity were respectively 250.32 mm and age 9 for males and 224.71 mm and age 8 for females. The gonadosomatic index (GSI) significantly changed with seasons for mature individuals but not for immature individuals. GSIs of mature females at stages IV and V of ovary development increased with SL and reached a maximum value at the SL range from 370 mm to 390 mm; the GSIs of mature males were negatively correlated with SL. The breeding season lasted from early April to early August. Egg size did not significantly change with SL but increased with the delay of spawning. The individual absolute fecundity varied from 1,341 to 28,002 eggs (mean 12,607+/-7,349), and the individual relative fecundity varied from 6.4 to 42.0 eggs.g(-1) (mean 25.5+/-9.7). The individual fecundity increased with total body weight; it also increased with SL for those of SL less than 370 mm. There was a rest of spawning for mature individuals.

Industrial ecology at factory level - A conceptual model

Growing environmental concerns caused by natural resource depletion and pollution need to be addressed. One approach to these problems is Sustainable Development, a key concept for our society to meet present as well as future needs worldwide. Manufacturing clearly has a major role to play in the move towards a more sustainable society. However it appears that basic principles of environmental sustainability are not systematically applied, with practice tending to focus on local improvements. The aim of the work presented in this paper is to adopt a more holistic view of the factory unit to enable opportunities for wider improvement. This research analyses environmental principles and industrial practice to develop a conceptual manufacturing ecosystem model as a foundation to improve environmental performance. The model developed focuses on material, energy and waste flows to better understand the interactions between manufacturing operations, supporting facilities and surrounding buildings. The research was conducted in three steps: (1) existing concepts and models for industrial sustainability were reviewed and environmental practices in manufacturing were collected and analysed; (2) gaps in knowledge and practice were identified; (3) the outcome is a manufacturing ecosystem model based on industrial ecology (IE). This conceptual model has novelty in detailing IE application at factory level and integrating all resource flows. The work is a base on which to build quantitative modelling tools to seek integrated solutions for lower resource input, higher resource productivity, fewer wastes and emissions, and lower operating cost within the boundary of a factory unit. © 2012 Elsevier Ltd. All rights reserved.

Flaw sizing in pipes using long-range guided wave testing

The absence of adequate inspection data from difficult-to-access areas on pipelines, such as cased-road crossings, makes determination of fitness for continued service and compliance with increasingly stringent regulatory requirements problematic. Screening for corrosion using long-range guided wave testing is a relatively new inspection technique. The complexity of the possible modes of vibration means the technique can be difficult to implement effectively but this also means that it has great potential for both detecting and characterizing flaws. The ability to determine flaw size would enable the direct application of standard procedures for determining fitness-for-service, such as ASME B31G, RSTRENG, or equivalent for tens of metres of pipeline from a single inspection location. This paper presents a new technique for flaw sizing using guided wave inspection data. The technique has been developed using finite element models and experimentally validated on 6'' Schedule 40 steel pipe. Some basic fitness-for-service assessments have been carried out using the measured values and the maximum allowable operating pressure was accurately determined. © 2011 American Institute of Physics.

Industrial ecology at factory level: A prototype methodology

The concept of sustainable manufacturing is a form of pollution prevention that integrates environmental considerations in the production of goods while focusing on efficient resource use. Taking the industrial ecology perspective, this efficiency comes from improved resource flow management. The assessment of material, energy and waste resource flows, therefore, offers a route to viewing and analysing a manufacturing system as an ecosystem using industrial ecology biological analogy and can, in turn, support the identification of improvement opportunities in the material, energy and waste flows. This application of industrial ecology at factory level is absent from the literature. This article provides a prototype methodology to apply the concepts of industrial ecology using material, energy and waste process flows to address this gap in the literature. Various modelling techniques were reviewed and candidates selected to test the prototype methodology in an industrial case. The application of the prototype methodology showed the possibility of using the material, energy and waste resource flows through the factory to link manufacturing operations and supporting facilities, and to identify potential improvements in resource use. The outcomes of the work provide a basis to build the specifications for a modelling tool that can support those analysing their manufacturing system to improve their environmental performance and move towards sustainable manufacturing. © IMechE 2012.

Long range exhaustion-a mathematical model for the axisymmetric air flow of a local exhaust ventilation hood assisted by a turbulent radial jet

Abstract-Mathematical modelling techniques are used to predict the axisymmetric air flow pattern developed by a state-of-the-art Banged exhaust hood which is reinforced by a turbulent radial jet flow. The high Reynolds number modelling techniques adopted allow the complexity of determining the hood's air Bow to be reduced and provide a means of identifying and assessing the various parameters that control the air Bow. The mathematical model is formulated in terms of the Stokes steam function, ψ, and the governing equations of fluid motion are solved using finite-difference techniques. The injection flow of the exhaust hood is modelled as a turbulent radial jet and the entrained Bow is assumed to be an inviscid potential flow. Comparisons made between contours of constant air speed and centre-line air speeds deduced from the model and all the available experimental data show good agreement over a wide range of typical operating conditions. | Mathematical modelling techniques are used to predict the axisymmetric air flow pattern developed by a state-of-the-art flanged exhaust hood which is reinforced by a turbulent radial jet flow. The high Reynolds number modelling techniques adopted allow the complexity of determining the hood's air flow to be reduced and provide a means of identifying and assessing the various parameters that control the air flow. The mathematical model is formulated in terms of the Stokes steam function, Ψ, and the governing equations of fluid motion are solved using finite-difference techniques. The injection flow of the exhaust hood is modelled as a turbulent radial jet and the entrained flow is assumed to be an inviscid potential flow. Comparisons made between contours of constant air speed and centre-line air speeds deduced from the model and all the available experimental data show good agreement over a wide range of typical operating conditions.

End-of-range defects in germanium and their role in boron deactivation

We investigated the thermal evolution of end-of-range (EOR) defects in germanium and their impact on junction thermal stability. After solid-phase epitaxial regrowth of a preamorphized germanium layer, EOR defects exhibiting dislocation loop-like contrast behavior are present. These defects disappear during thermal annealing at 400 °C, while boron electrical deactivation occurs. After the whole defect population vanishes, boron reactivation is observed. These results indicate that germanium self-interstitials, released by EOR defects, are the cause of B deactivation. Unlike in Si, the whole deactivation/reactivation cycle in Ge is found to take place while the maximum active B concentration exceeds its solubility limit. © 2010 American Institute of Physics.

THE SENSITIVITY OF 2D COMPRESSOR INCIDENCE RANGE TO IN-SERVICE GEOMETRIC VARIATION

The loss mechanisms which control 2D incidence range are discussed with an emphasis on determining which real in-service geometric variations will have the largest impact. For the majority of engine compressor blades (Minlet>0.55) both the negative and positive incidence limits are controlled by supersonic patches. It is shown that these patches are highly sensitive to the geometric variations close to, and around the leading edge. The variations used in this study were measured from newly manufactured as well as ex-service blades. Over most the high pressure compressor considered, it was shown that manufacture variations dominated. The first part of the paper shows that, despite large geometric variations (~10% of leading edge thickness), the incidence range responded in a linear way. The result of this is that the geometric variations have little effect on the mean incidence range of a row of blades. In the second part of the paper a region of the design space is identified where non-linear behavior can result in a 10% reduction in positive incidence range. The mechanism for this is reported and design guidelines for its avoidance offered. In the final part of the paper, the linear behavior at negative incidence and the transonic nature of the flow is exploited to design a robust asymmetric leading edge with a 5% increase in incidence range.