Citrus root distribution under water stress grown in sandy soil of central Florida

The experiment was conducted in an orchard located in University of Florida (Citrus Research and Education Center), Lake Alfred, Polk County, Florida, USA. The objective of this study was to evaluate the effects of water stress in root distribution of 'Valencia' orange tree on 'Swingle' citrumelo rootstock. Three treatments were imposed on the trees: 1) normal irrigation with microsprinklers, 2) no irrigation in winter (November through mid-March) and 3) rainfall exclusion by placing a water repelling fabric (Tyvek) under the trees. Trees in treatments 1 and 2 received normal rainfall during the winter, but treatment 3 received no rain. Normal irrigation was resumed on all treatments in mid March. Soil was collected using root auger head (0.09 m diameter and height 0.25 m) in two opposing quadrants (West and East at 3 horizontal distances from tree trunk (1, 2 and 3 m) and 4 depths (0.0-0.15; 0.15-0.30; 0.30-0.60 and 0.60-0.90 m). The results from root sampling showed that there was a significant difference in root distribution between irrigated treatment and non irrigated/non rainfall.

Soil water evaporation under densities of coverage with vegetable residue

This study was conducted at the Agronomic Institute of Paraná (IAPAR) in Londrina, State of Paraná (PR), Brazil (latitude 23º18'S, longitude 51º09'W and average altitude of 585 m). The local climate, according to the classification of Köeppen, is Cfa type, i.e., humid subtropical climate, with rain in all seasons and can occur dry seasons during the winter. It was determined soil evaporation (E) under different coverage densities with residue from the wheat crop. The treatments were installed in weighting lysimeters of 2.66 m² and 1.3 m deep, which allows to determine E by the mass difference with measuring precision of 0.1mm at one hour intervals. Treatments consisted of 0; 2.5; 5 and 10 t ha-1 of wheat crop residues, placed evenly over each lysimeter. In the first cycle (September 22nd to October 20th, 2008), the reduction of E, as compared to a bare soil, was 4; 15 and 24%, while in the second cycle (December 1st to 30th, 2008), the reduction was of 15; 22 and 25%, respectively, for the treatments of 2.5; 5 and 10 t ha-1.

Ratoon sugarcane yield integrated drip-irrigation and nitrogen fertilization

The aim of this study was to compare the use of water and nitrogen on ratoon sugarcane during irrigated and rain-fed conditions, and to assess the production potential of stalks and sugar with different rates of N-fertilizer on the subsurface drip-irrigated management. The experimental design was a randomized block with four replications for each experiment and treatments: (T1) irrigated, 0kg N ha-1; (T2) irrigated, 70kg N ha-1; (T3) irrigated, 140kg N ha-1; (T4) irrigated, 210kg N ha-1; (T5) not irrigated, 0kg N ha-1, and (T6) not irrigated, 140kg N ha-1. Biometric, technological, dry matter and yield variables were analyzed among the treatments. The irrigation system together with the application of N-fertilizer at 140kg ha-1 presented significant differences in dry matter accumulation of shoots, and for the production of stalks and sugar, respectively 94, 105 and 106%, higher when compared to the not irrigated, without N-fertilizer (T5). There was a positive and synergistic effect of irrigation with N-fertilizer on the productivity of stalks and sugar. Ratoon sugarcane irrigated with subsurface dripping had the highest yield (22Mg ha-1 of sugar) with the dosage of 140kg ha-1 N.

Analysis of the relationship intensity, duration, frequency of disaggregated daily rainfall in southern Rio Grande do Sul, Brazil

The intensity, duration, and frequency relationship (IDF) of rainfall occurrence may be done through continuous records of pluviographs or daily pluviometer values . The objective of this study was to estimate the intensity-duration-frequency relationships of precipitation, using the method of daily rainfall disaggregation, at weather stations located to the southern half of the state of Rio Grande do Sul; comparing them with those obtained by rain gauge records, in places considered homogeneous from the meteorological point of view. The IDF equation parameters were estimated from daily rainfall disaggregation data, using the method of nonlinear optimization. To validate the equations confidence indices and efficiency and the "t" Student test, among maximum intensity values obtained from the disaggregated daily rainfall durations of 10; 30; 60 min and 6; 12 and 24 h and those extracted from existing IDF equations. For all studied stations and return periods, the trust index values were regarded as "optimal", i.e., greater than 0.85. The maximal intensity of rainfall obtained by daily rainfall disaggregation have similarity with those obtained by relations IDF standards. Thus, the method constitutes a feasible alternative in obtaining the IDF relationships.

Method adjustment and equation set of maximum rainfall intensity, duration and frequency in the Mato Grosso do Sul State

Due to the lack of information concerning maximum rainfall equations for most locations in Mato Grosso do Sul State, the alternative for carrying out hydraulic work projects has been information from meteorological stations closest to the location in which the project is carried out. Alternative methods, such as 24 hours rain disaggregation method from rainfall data due to greater availability of stations and longer observations can work. Based on this approach, the objective of this study was to estimate maximum rainfall equations for Mato Grosso do Sul State by adjusting the 24 hours rain disaggregation method, depending on data obtained from rain gauge stations from Dourado and Campo Grande. For this purpose, data consisting of 105 rainfall stations were used, which are available in the ANA (Water Resources Management National Agency) database. Based on the results we concluded: the intense rainfall equations obtained by pluviogram analysis showed determination coefficient above 99%; and the performance of 24 hours rain disaggregation method was classified as excellent, based on relative average error WILMOTT concordance index (1982).

Bartlett-Lewis of rectangular pulse modified model: estimate of parameters for simulation of precipitation in sub-hourly duration

The Bartlett-Lewis Rectangular Pulse Modified (BLPRM) model simulates the precipitous slide in the hourly and sub-hourly and has six parameters for each of the twelve months of the year. This study aimed to evaluate the behavior of precipitation series in the duration of 15 min, obtained by simulation using the model BLPRM in situations: (a) where the parameters are estimated from a combination of statistics, creating five different sets; (b) suitability of the model to generate rain. To adjust the parameters were used rain gauge records of Pelotas/RS/Brazil, which statistics were estimated - mean, variance, covariance, autocorrelation coefficient of lag 1, the proportion of dry days in the period considered. The results showed that the parameters related to the time of onset of precipitation (λ) and intensities (μx) were the most stable and the most unstable were ν parameter, related to rain duration. The BLPRM model adequately represented the mean, variance, and proportion of the dry period of the series of precipitation lasting 15 min and, the time dependence of the heights of rain, represented autocorrelation coefficient of the first retardation was statistically less simulated series suitability for the duration of 15 min.

Weather variables, water balance, growth, and agro industrial yield of sugarcane

The objective of this study was to evaluate the meteorological variables, water deficiency, growth, and agro-industrial yield of sugarcane varieties: RB72454, RB863129, RB867515, RB92579, RB93509, RB931003, RB951541, and RB971755, in rainfed crop in two harvests in the Rio Largo-AL region. The meteorological variables were obtained in an automatic station and water balance was done by Thornthwaite & Mather method. During the study period, the air temperature ranged from 16.6 to 35.9 ºC. In the first production cycle rained 1,806 mm and the crop evapotranspiration was 1,775 mm. In the second cycle, the rainfall totaled 1,632 mm and the crop evapotranspiration was 1,290 mm. The average water excess of two production cycles was 689 mm and the water deficit totaled 665 mm. The average agricultural productivity in the plant was 86.8 t ha-1, in the first ratoon was 75.2 t ha-1 and the agro-industrial yield average was 12.9 and 10.9 tons of sugar per hectare in the plant and first ratoon, respectively. The air temperature was not limiting to the growth of sugarcane and the rainfall was higher than the crop evapotranspiration, but due to poor distribution of the rains there was water deficit. The most productive varieties were RB93509, RB92579, and RB863129.

Hulevesikuormitus ja sen vähentäminen rakennetulla alueella

Työssä tarkasteltiin hulevesien ravinnekuormituksen muodostumista ja kuormituksen vähentämismahdollisuuksia rakennetussa ympäristössä esimerkkialueena Sunisenlahden valuma-alue. Työn tavoitteena oli löytää ns. hotspot- alueet ja esittää valuma-alueelle osa-alueittain käsittelymenetelmä, joka soveltuu kyseisen alueen hulevesien käsittelyyn, huomioi alueen maankäytön, maastoprofiilin, maanomistuksesta ja maaperästä johtuvat rajoitukset. Sunisenlahden valuma-alue on kokonaisuudessaan rakennettua, jakautuen 24 osavaluma-alueeseen, joiden pinta-alat ja maankäyttö poikkeavat toisistaan. Alueella on kauttaaltaan sadevesiverkosto, jonka purku tapahtuu pääosin Sunisenlahdelle. Osa valuma-alueista on keskustamaisia, osa väljästi rakennettua pientaloaluetta. Joillakin valuma-alueilla on myös toimintoja, joiden hulevesien käsittely edellyttää myös haitta-aineiden poistamista. Valuma-alueella tutkittiin ravinnekuormituksen muodostumista näyttein 12 näytepisteellä. Typpikuormituksesta hulevesien osuus on noin 48 % ja fosforikuormituksesta hulevesien osuus on noin 36 %.

Bus bar aeolian vibration field tests

Large amplitude bus bar aeolian vibration may lead to post insulator damage. Different damping applications are used to decrease the risk of large amplitude aeolian vibration. In this paper the post insulator load caused by the bus bar aeolian vibration and the effect of damping methods are evaluated. The effects of three types of bus bar connectors and three types of primary structures are studied. Two actual damping devices, damping cable and their combinations are studied. The post insulator loads are studied with strain gage based custom made force sensors installed on the both ends of the post insulator and with the displacement sensor installed on the midpoint of the bus bar. The post insulator loads are calculated from the strain values and the damping properties are determined from the displacement history. The bus bar is deflected with a hanging weight. The weight is released and the bus bar is left to free damped vibration. Both actual bus bar vibration dampers RIBE and SBI were very effective against the aeolian vibration. Combining vibration damper with damping cable will increase the damping ratio but it may be unnecessary considering the extra effort. Bus bar connector type or primary structure have no effect on the vertical load. The bending moment at the post insulator with double sided bus bar connector is significantly higher than at the post insulator with single sided bus bar connector. No reliable conclusions about bus bar connector type effect can be done, but the roller bearing type or central bearing type connector may reduce the bending moment. The RHS steel frame as primary structure may increase the bending moment peak values since it is the least rigid primary structure type and it may start to vibrate as a response to the awakening force of the vibrating bus bar.

Weed emergence in autumn under temperate conditions

The emergence of weed plants depends on environmental conditions, especially temperature and soil moisture. The latter is extremely important in Mediterranean environments which are characterized by irregular amount and distribution of rain throughout the year, which influences the beginning of the growth cycle of the annual species (seed germination). This paper studies the influence of rainfall, in particular accumulated rainfall in autumn, on the emergence of weed plants. The experiment was carried out on Luvisols, and the appearance of flora under field conditions was observed. Through analysis of the results, it can be concluded that a high percentage of weed plants (> 85% related to the highest registered value) was obtained with more than 90 mm of accumulated rainfall from the beginning of September. Thus, in those years in which this amount of rainfall (90 mm) is registered until the end of October, the appearance of potential weed plants can be ensured, under Mediterranean conditions, in a period before sowing the autumn-winter crops.

Leaching of Picloram in ultisol under different rainfall volumes

The present study aimed to evaluate the leaching potential of Picloram in Ultisol columns under different rainfall amounts. For such, 30 treatments were evaluated (one soil associated with three levels of rainfall and ten depths).The experiments were arranged in a split-plot design, in a completely randomized design, with four replications. PVC columns of 10 cm in diameter and 50 cm in length were filled with these soils, moistened, and placed upright for 48 hours to drain the excess water. The herbicide was applied and rainfall simulations were carried out at specified intensities, according to the treatments, to force Picloram leaching. After 72 hours, all the columns were arranged in a horizontal position and opened lengthwise. Then, soil sampling was carried out every 5 cm of depth for subsequent herbicide extraction and quantification and analysis by high performance liquid chromatography. The remaining soil samples were placed in plastic pots, and, at the respective depths, the indicator species Cucumis sativus was sown. Twenty-one days after the emergence (DAE) of the indicator plants, evaluations were conducted to verify the symptoms of toxicity caused by Picloram in the plants. It was concluded that Picloram leaching is directly dependent on the volume of rain applied. The herbicide reached the deepest regions in the soil with the highest intensity of rain. The results obtained by bioassay were in agreement with those found by liquid chromatography.

Germination ecology of wild onion: a rainfed crop weed

Asphodelus tenuifolius is becoming a more common weed in rain-fed area in Pakistan. Laboratory and greenhouse experiments were conducted to determine the effect of different environmental factors on germination and emergence of A.tenuifolius. Results showed that A.tenuifolius can tolerate a wide range of varying environmental factors. Greatest percentage of germination (80%) was recorded at 15 ºC constant temperature; however, considerable germination occurred at 20 and 25 ºC. Light for 10 h photoperiod stimulate germination of Asphodelus tenuifolius compared with complete darkness. Germination was totally inhibited at osmotic stress higher than -0.8 MPa. There was no significant difference in germination at pH 6 to 8; however, there was a slightly decrease at pH 9, compared with distilled water. Asphodelus tenuifolius was very sensitive to salinity; however, a few seeds of A.tenuifolius were able to germinate even at 150 mM NaCl concentration. Greatest emergence occurred with seed placed at soil surface and emergence decreased with increase in burial depth. No emergence occurred from 4 cm or greater. This information may aid in developing tools and strategies for management.

PHYSIOLOGICAL QUALITY OF SOYBEAN SEEDS DEPENDING ON THE PREHARVEST DESICCATION

ABSTRACTDepending on the cultivar, the use of desiccants in the preharvest can favor maintenance of physiological quality. The objective of the study was to assess the physiological quality of soybean seeds as due to the use of apreharvest desiccant and desiccation time in two harvests (2011/12 and 2012/13). The treatments were five soybean cultivars, two growth stages of application, a control (without desiccant application), and three desiccants (glufosinate-ammonium, carfentrazone-ethyl and paraquat) (2011/12 harvest). In the 2012/13 harvest the carfentrazone-ethyl desiccant was replaced by diquat. The physiological quality of seeds was assessed by the percentage of viability and vigor (cold test, tetrazolium test and accelerated aging test). In 2011/12 harvest, there was an early harvest in six days with the use of glufosinate-ammonium and paraquat desiccants, when desiccation was done in stage R7.1, with maintenance of seed quality; however it was dependent on the cultivar. In the 2012/13 harvest there was no early harvesting due to the presence of rain in the preharvest and the use of desiccation did not affect the physiological quality of the seeds either. Cultivar NA5909 RG was more tolerant to remaining in the cultivation environment and maintained higher viability than 90% and greater vigor of 71% by the cold test compared to cultivar BMX Turbo (2011/12 harvest). It is concluded that desiccation can be a viable alternative to the soybean early harvesting, but it depends on the cultivar, the time of desiccation, the active principle of the desiccant and the absence of rain in preharvest.

WATER USE EFFICIENCY, GROWTH AND YIELD OF WHEAT CULTIVATED UNDER COMPETITION WITH Setaria

ABSTRACT Understanding the critical period of weed competition is indispensable in the development of an effective weed management program in field crops. Current experiment was planned to evaluate the critical growth period ofSetaria and level of yield losses associated with delay in weeding in rain-fed drip irrigated wheat production system of Saudi Arabia. Field experiment was conducted to evaluate the effect of weeding interval (07-21, 14-28, 21-35, 28-42 and 35-49 days after sowing) and drought stress (75% and 50% of field capacity) on Setaria growth, wheat yield and water use efficiency. Season long weedy check and wellwatered (100% FC) plots were also maintained for comparison. Weeding interval and drought stress significantly (p ≤ 0.05) affected the growth and yield of Setaria and wheat. Drought stress from 75% to 50% FC resulted in reductions of 29-40% in Setaria height, 14-27% in Setaria density and 11-26% in Setaria dry biomass. All weeding intervals except 35-49 DAS significantly suppressedSetaria growth as compared with control. Delay in weeding increased weed-crop competition interval and reduced wheat yield and yield contributors. Therefore, the lowest yield of 1836 kg ha-1 was attained for weeding interval of 35-49 DAS at 50% FC. Water use efficiency and harvest index increased with decreasing FC levels but reduced with delay in weeding. Correlation analysis predicted negative association ofSetariadensity with wheat yield and yield contributors and the highest negative association was for harvest index (-0.913) and water use efficiency (-0.614). Early management of Setaria is imperative for successful wheat production otherwise yield losses are beyond economical limits.

Floração e chuva de sementes em mata secundária em São Paulo, SP

(Floração e chuva de sementes em mata secundária em São Paulo, SP). O florescimento e a chuva de sementes foram estudados em trecho de mata secundária em São Paulo, SP, através da coleta de material reprodutivo depositado em peneiras de 0,5 x 0,5 m, recolhido mensalmente entre janeiro e dezembro de 1993. Foram identificadas 90 espécies pertencentes a 37 famílias. Observaram-se padrões sazonais de floração e de frutificação, sendo que a maioria das espécies floresceu a partir de setembro, com picos de floração e de frutificação em novembro. O padrão de floração encontrado foi o mesmo verificado em outras florestas da região, sendo o de frutificação mais sazonal. Na chuva de sementes, as espécies anemocóricas dispersaram propágulos predominantemente em novembro, no início das chuvas e não durante a estação seca, como esperado. A maioria das espécies zoocóricas liberou propágulos durante o meio da estação chuvosa, com pico em janeiro, na época de melhores condições de amadurecimento do fruto, dispersão de sementes e estabelecimento de plântulas. As lianas produziram a maior quantidade de propágulos, enquanto das arbóreas obteve-se o maior número de espécies.