Lava discharge rate estimates from thermal infrared satellite data at Pacaya Volcano, Guatemala

Time-averaged discharge rates (TADR) were calculated for five lava flows at Pacaya Volcano (Guatemala), using an adapted version of a previously developed satellite-based model. Imagery acquired during periods of effusive activity between the years 2000 and 2010 were obtained from two sensors of differing temporal and spatial resolutions; the Moderate Resolution Imaging Spectroradiometer (MODIS), and the Geostationary Operational Environmental Satellites (GOES) Imager. A total of 2873 MODIS and 2642 GOES images were searched manually for volcanic “hot spots”. It was found that MODIS imagery, with superior spatial resolution, produced better results than GOES imagery, so only MODIS data were used for quantitative analyses. Spectral radiances were transformed into TADR via two methods; first, by best-fitting some of the parameters (i.e. density, vesicularity, crystal content, temperature change) of the TADR estimation model to match flow volumes previously estimated from ground surveys and aerial photographs, and second by measuring those parameters from lava samples to make independent estimates. A relatively stable relationship was defined using the second method, which suggests the possibility of estimating lava discharge rates in near-real-time during future volcanic crises at Pacaya.

Parameter estimation for transformer modeling

Large Power transformers, an aging and vulnerable part of our energy infrastructure, are at choke points in the grid and are key to reliability and security. Damage or destruction due to vandalism, misoperation, or other unexpected events is of great concern, given replacement costs upward of $2M and lead time of 12 months. Transient overvoltages can cause great damage and there is much interest in improving computer simulation models to correctly predict and avoid the consequences. EMTP (the Electromagnetic Transients Program) has been developed for computer simulation of power system transients. Component models for most equipment have been developed and benchmarked. Power transformers would appear to be simple. However, due to their nonlinear and frequency-dependent behaviors, they can be one of the most complex system components to model. It is imperative that the applied models be appropriate for the range of frequencies and excitation levels that the system experiences. Thus, transformer modeling is not a mature field and newer improved models must be made available. In this work, improved topologically-correct duality-based models are developed for three-phase autotransformers having five-legged, three-legged, and shell-form cores. The main problem in the implementation of detailed models is the lack of complete and reliable data, as no international standard suggests how to measure and calculate parameters. Therefore, parameter estimation methods are developed here to determine the parameters of a given model in cases where available information is incomplete. The transformer nameplate data is required and relative physical dimensions of the core are estimated. The models include a separate representation of each segment of the core, including hysteresis of the core, λ-i saturation characteristic, capacitive effects, and frequency dependency of winding resistance and core loss. Steady-state excitation, and de-energization and re-energization transients are simulated and compared with an earlier-developed BCTRAN-based model. Black start energization cases are also simulated as a means of model evaluation and compared with actual event records. The simulated results using the model developed here are reasonable and more correct than those of the BCTRAN-based model. Simulation accuracy is dependent on the accuracy of the equipment model and its parameters. This work is significant in that it advances existing parameter estimation methods in cases where the available data and measurements are incomplete. The accuracy of EMTP simulation for power systems including three-phase autotransformers is thus enhanced. Theoretical results obtained from this work provide a sound foundation for development of transformer parameter estimation methods using engineering optimization. In addition, it should be possible to refine which information and measurement data are necessary for complete duality-based transformer models. To further refine and develop the models and transformer parameter estimation methods developed here, iterative full-scale laboratory tests using high-voltage and high-power three-phase transformer would be helpful.

Estimating greenhouse gas emissions of highway construction and rehabilitation to support pavement life cycle assessment

Highway infrastructure plays a significant role in society. The building and upkeep of America’s highways provide society the necessary means of transportation for goods and services needed to develop as a nation. However, as a result of economic and social development, vast amounts of greenhouse gas emissions (GHG) are emitted into the atmosphere contributing to global climate change. In recognizing this, future policies may mandate the monitoring of GHG emissions from public agencies and private industries in order to reduce the effects of global climate change. To effectively reduce these emissions, there must be methods that agencies can use to quantify the GHG emissions associated with constructing and maintaining the nation’s highway infrastructure. Current methods for assessing the impacts of highway infrastructure include methodologies that look at the economic impacts (costs) of constructing and maintaining highway infrastructure over its life cycle. This is known as Life Cycle Cost Analysis (LCCA). With the recognition of global climate change, transportation agencies and contractors are also investigating the environmental impacts that are associated with highway infrastructure construction and rehabilitation. A common tool in doing so is the use of Life Cycle Assessment (LCA). Traditionally, LCA is used to assess the environmental impacts of products or processes. LCA is an emerging concept in highway infrastructure assessment and is now being implemented and applied to transportation systems. This research focuses on life cycle GHG emissions associated with the construction and rehabilitation of highway infrastructure using a LCA approach. Life cycle phases of the highway section include; the material acquisition and extraction, construction and rehabilitation, and service phases. Departing from traditional approaches that tend to use LCA as a way to compare alternative pavement materials or designs based on estimated inventories, this research proposes a shift to a context sensitive process-based approach that uses actual observed construction and performance data to calculate greenhouse gas emissions associated with highway construction and rehabilitation. The goal is to support strategies that reduce long-term environmental impacts. Ultimately, this thesis outlines techniques that can be used to assess GHG emissions associated with construction and rehabilitation operations to support the overall pavement LCA.

Energy and conductance state modeling of power electronic converters for DC microgrids

This document will demonstrate the methodology used to create an energy and conductance based model for power electronic converters. The work is intended to be a replacement for voltage and current based models which have limited applicability to the network nodal equations. Using conductance-based modeling allows direct application of load differential equations to the bus admittance matrix (Y-bus) with a unified approach. When applied directly to the Y-bus, the system becomes much easier to simulate since the state variables do not need to be transformed. The proposed transformation applies to loads, sources, and energy storage systems and is useful for DC microgrids. Transformed state models of a complete microgrid are compared to experimental results and show the models accurately reflect the system dynamic behavior.

Unsticking the centre-piece – the liberation of European copyright law?

Following European legislative initiatives in the field of copyright limitations and exceptions, policy flexibilities formerly available to mem- ber states has been greatly diminished. The law in this area is increasingly incapable of accommodating any expansion in the scope of freely permitted acts, even where such expansion may be an appropriate response to changes in social and technological conditions. In this article, the causes of this problem are briefly canvassed and a number of potential solutions are noted. It is suggested that one such solution – the adoption of an open, factor-based model similar to s 107 of the United States’ Copyright Act – has not received the serious attention it deserves. The fair use paradigm has generally been dismissed as excessively unpredictable, contrary to international law and/or culturally alien. Drawing on recent fair use scholarship, it is argued here that these disadvantages are over-stated and that the potential for the development of a European fair use model merits investigation.

Ansätze zur Qualitätsbewertung von generativen Fertigungsverfahren durch die Einführung eines Kennzahlensystems

Generative Fertigungsverfahren haben sich in den letzten Jahren als effektive Werkzeuge für die schnelle Entwicklung von Produkten nahezu beliebiger Komplexität entwickelt. Gleichzeitig wird gefordert, die Reproduzierbarkeit der Bauteile und auch seriennahe bzw. seriengleiche Eigenschaften zu gewährleisten. Die Vielfalt und der Umfang der Anwendungen sowie die große Anzahl verschiedener generativer Fertigungsverfahren verlangen adäquate Qualitätsüberwachungs- und Qualitätskontrollsysteme. Ein Lösungsansatz für die Qualitätsbewertung von generativen Fertigungsverfahren besteht in der Einführung eines Kennzahlensystems. Hierzu müssen zunächst Anforderungsprofile und Qualitätsmerkmale für generativ hergestellte Bauteile definiert werden, welche durch Prüfkörpergeometrien abgebildet und mit Hilfe von Einzelkennzahlen klassifiziert werden. In Rahmen der durchgeführten Untersuchungen wurde die Qualitätsbewertung anhand von Prüfkörpergeometrien am Beispiel des Laser-Sinterprozesses qualifiziert. Durch Beeinflussung der Prozessparameter, d.h. der gezielten Einbringung von Störgrößen, welche einzeln oder in Kombination zu unzulässigen Qualitätsschwankungen führen können, ist es möglich, die Qualität des Produktes zu beurteilen. Die Definition von Einzelkennzahlen, die eine Steuerung und Kontrolle sowie eine Vorhersage potentieller Fehler ermöglicht, bietet hierbei essentielle Möglichkeiten zur Qualitätsbewertung. Eine Zusammenführung zu einem gesamtheitlichen Kennzahlensystem soll zum einen den Prozess auf Grundlage der definierten Anforderungsprofile bewerten und zum anderen einen direkten Zusammenhang der ausgewählten Störgrößen und Prozessgrößen herleiten, um vorab eine Aussage über die Bauteilqualität treffen zu können.

Autorenwerkzeuge für digitale, multimediale und interaktive Lernbausteine im Web 2.0

Die vorliegende Forschungsarbeit siedelt sich im Dreieck der Erziehungswissenschaften, der Informatik und der Schulpraxis an und besitzt somit einen starken interdisziplinären Charakter. Aus Sicht der Erziehungswissenschaften handelt es sich um ein Forschungsprojekt aus den Bereichen E-Learning und Multimedia Learning und der Fragestellung nach geeigneten Informatiksystemen für die Herstellung und den Austausch von digitalen, multimedialen und interaktiven Lernbausteinen. Dazu wurden zunächst methodisch-didaktische Vorteile digitaler Lerninhalte gegenüber klassischen Medien wie Buch und Papier zusammengetragen und mögliche Potentiale im Zusammenhang mit neuen Web 2.0-Technologien aufgezeigt. Darauf aufbauend wurde für existierende Autorenwerkzeuge zur Herstellung digitaler Lernbausteine und bestehende Austauschplattformen analysiert, inwieweit diese bereits Web 2.0-Technologien unterstützen und nutzen. Aus Sicht der Informatik ergab sich aus der Analyse bestehender Systeme ein Anforderungsprofil für ein neues Autorenwerkzeug und eine neue Austauschplattform für digitale Lernbausteine. Das neue System wurde nach dem Ansatz des Design Science Research in einem iterativen Entwicklungsprozess in Form der Webapplikation LearningApps.org realisiert und stetig mit Lehrpersonen aus der Schulpraxis evaluiert. Bei der Entwicklung kamen aktuelle Web-Technologien zur Anwendung. Das Ergebnis der Forschungsarbeit ist ein produktives Informatiksystem, welches bereits von tausenden Nutzern in verschiedenen Ländern sowohl in Schulen als auch in der Wirtschaft eingesetzt wird. In einer empirischen Studie konnte das mit der Systementwicklung angestrebte Ziel, die Herstellung und den Austausch von digitalen Lernbausteinen zu vereinfachen, bestätigt werden. Aus Sicht der Schulpraxis liefert LearningApps.org einen Beitrag zur Methodenvielfalt und zur Nutzung von ICT im Unterricht. Die Ausrichtung des Werkzeugs auf mobile Endgeräte und 1:1-Computing entspricht dem allgemeinen Trend im Bildungswesen. Durch die Verknüpfung des Werkzeugs mit aktuellen Software-Entwicklungen zur Herstellung von digitalen Schulbüchern werden auch Lehrmittelverlage als Zielgruppe angesprochen.

Dezentrale selbstorganisierte Grobplanung von Intralogistiksystemen mit Hilfe eines Software-Agentensystems

In diesem Beitrag wird eine dezentral aufgebaute und auf Selbstorganisation basierende Methodik zur Grobplanung von Intralogistiksystemen thematisiert. Diese Methodik sieht eine Kombination des Wissenschaftsgebiets der Agentensysteme aus der Informatik mit der Materialflussplanung vor. Dieser Artikel leistet somit einen Beitrag für die Entwicklung eines intelligenten, rechnergestützten Assistenzsystems zur Planung intralogistischer Systeme.

The pollen tube: a soft shell with a hard core

Plant cell expansion is controlled by a fine-tuned balance between intracellular turgor pressure, cell wall loosening and cell wall biosynthesis. To understand these processes, it is important to gain in-depth knowledge of cell wall mechanics. Pollen tubes are tip-growing cells that provide an ideal system to study mechanical properties at the single cell level. With the available approaches it was not easy to measure important mechanical parameters of pollen tubes, such as the elasticity of the cell wall. We used a cellular force microscope (CFM) to measure the apparent stiffness of lily pollen tubes. In combination with a mechanical model based on the finite element method (FEM), this allowed us to calculate turgor pressure and cell wall elasticity, which we found to be around 0.3 MPa and 20–90 MPa, respectively. Furthermore, and in contrast to previous reports, we showed that the difference in stiffness between the pollen tube tip and the shank can be explained solely by the geometry of the pollen tube. CFM, in combination with an FEM-based model, provides a powerful method to evaluate important mechanical parameters of single, growing cells. Our findings indicate that the cell wall of growing pollen tubes has mechanical properties similar to rubber. This suggests that a fully turgid pollen tube is a relatively stiff, yet flexible cell that can react very quickly to obstacles or attractants by adjusting the direction of growth on its way through the female transmitting tissue.

Gründungsausbildung und Gründungsabsicht: eine empirische Untersuchung an der TU Dortmund

Für das wirtschaftliche Wachstum und die Innovationskraft einer Volkswirtschaft sind junge Unternehmen von herausragender Bedeutung. Ein wichtiges Ziel von Politik und Wirtschaft muss folglich die Sensibilisierung und Förderung potenzieller Gründer sein. Die vorliegende Untersuchung geht der Frage nach, ob eine universitäre Gründungsausbildung die Gründungsabsicht von Studierenden positiv beeinflussen kann. Aufbauend auf dem intentionsbasierten Modell von Krueger /Carsrud (1993) wurden im Rahmen einer Befragung an der TU Dortmund 111 Studierende der Wirtschaftswissenschaften zu ihren Gründungsabsichten befragt. Es zeigte sich, dass die Gründungsabsicht durch den Besuch von Veranstaltungen zum Gründungsmanagement deutlich gesteigert werden kann. Für die deutsche Wirtschafts- und Bildungspolitik ergibt sich aus den Ergebnissen die Handlungsempfehlung, die universitäre Gründungsausbildung auszubauen und intensiv zu fördern.

Assessment of detectability of neutral interstellar deuterium by IBEX observations

Context. The abundance of deuterium in the interstellar gas in front of the Sun gives insight into the processes of filtration of neutral interstellar species through the heliospheric interface and potentially into the chemical evolution of the Galactic gas. Aims: We investigate the possibility of detection of neutral interstellar deuterium at 1 AU from the Sun by direct sampling by the Interstellar Boundary Explorer (IBEX). Methods: Using both previous and the most recent determinations of the flow parameters of neutral gas in the local interstellar cloud (LIC) and an observation-based model of solar radiation pressure and ionization in the heliosphere, we simulated the flux of neutral interstellar D at IBEX for the actual measurement conditions. We assessed the number of interstellar D atom counts expected during the first three years of IBEX operation. We also simulated the observations expected during an epoch of high solar activity. In addition, we calculated the expected counts of D atoms from the thin terrestrial water layer covering the IBEX-Lo conversion surface, sputtered by neutral interstellar He atoms. Results: Most D counts registered by IBEX-Lo are expected to come from the water layer, exceeding the interstellar signal by 2 orders of magnitude. However, the sputtering should stop once the Earth leaves the portion of orbit traversed by interstellar He atoms. We identify seasons during the year when mostly the genuine interstellar D atoms are expected in the signal. During the first 3 years of IBEX operations about 2 detectable interstellar D atoms are expected. This number is comparable to the expected number of sputtered D atoms registered during the same time intervals. Conclusions: The most favorable conditions for the detection occur during low solar activity, in an interval including March and April each year. The detection chances could be improved by extending the instrument duty cycle, say, by making observations in the special deuterium mode of IBEX-Lo.

Inventory of veterinary syndromic surveillance initiatives in Europe (Triple-S project): current situation and perspectives.

Within the current context that favours the emergence of new diseases, syndromic surveillance (SyS) appears increasingly more relevant tool for the early detection of unexpected health events. The Triple-S project (Syndromic Surveillance Systems in Europe), co-financed by the European Commission, was launched in September 2010 for a three year period to promote both human and animal health SyS in European countries. Objectives of the project included performing an inventory of current and planned European animal health SyS systems and promoting knowledge transfer between SyS experts. This study presents and discusses the results of the Triple-S inventory of European veterinary SyS initiatives. European SyS systems were identified through an active process based on a questionnaire sent to animal health experts involved in SyS in Europe. Results were analyzed through a descriptive analysis and a multiple factor analysis (MFA) in order to establish a typology of the European SyS initiatives. Twenty seven European SyS systems were identified from twelve countries, at different levels of development, from project phase to active systems. Results of this inventory showed a real interest of European countries for SyS but also highlighted the novelty of this field. This survey highlighted the diversity of SyS systems in Europe in terms of objectives, population targeted, data providers, indicators monitored. For most SyS initiatives, statistical analysis of surveillance results was identified as a limitation in using the data. MFA results distinguished two types of systems. The first one belonged to the private sector, focused on companion animals and had reached a higher degree of achievement. The second one was based on mandatory collected data, targeted livestock species and is still in an early project phase. The exchange of knowledge between human and animal health sectors was considered useful to enhance SyS. In the same way that SyS is complementary to traditional surveillance, synergies between human and animal health SyS could be an added value, most notably to enhance timeliness, sensitivity and help interpreting non-specific signals.

Prediction of the thermal release of transactinide elements (112 ≤ Z ≤ 116) from metals

Metallic catcher foils have been investigated on their thermal release capabilities for future superheavy element studies. These catcher materials shall serve as connection between production and chemical investigation of superheavy elements (SHE) at vacuum conditions. The diffusion constants and activation energies of diffusion have been extrapolated for various catcher materials using an atomic volume based model. Release rates can now be estimated for predefined experimental conditions using the determined diffusion values. The potential release behavior of the volatile SHE Cn (E112), E113, Fl (E114), E115, and Lv (E116) from polycrystalline, metallic foils of Ni, Y, Zr, Nb, Mo, Hf, Ta, and W is predicted. Example calculations showed that Zr is the best suited material in terms of on-line release efficiency and long-term operation stability. If higher temperatures up to 2773 K are applicable, tungsten is suggested to be the material of choice for such experiments.

On the road through the Bolivian Amazon: a multi-level land governance analysis of deforestation

Previous studies have shown that collective property rights offer higher flexibility than individual property and improve sustainable community-based forest management. Our case study, carried out in the Beni department of Bolivia, does not contradict this assertion, but shows that collective rights have been granted in areas where ecological contexts and market facilities were less favourable to intensive land use. Previous experiences suggest investigating political processes in order to understand the criteria according to which access rights were distributed. Based on remote sensing and on a multi-level land governance framework, our research confirms that land placed under collective rights, compared to individual property, is less affected by deforestation among Andean settlements. However, analysis of the historical process of land distribution in the area shows that the distribution of property rights is the result of a political process based on economic, spatial, and environmental strategies that are defined by multiple stakeholders. Collective titles were established in the more remote areas and distributed to communities with lower productive potentialities. Land rights are thus a secondary factor of forest cover change which results from diverse political compromises based on population distribution, accessibility, environmental perceptions, and expected production or extraction incomes.

Multi-scale micro-structure generation strategy for up-scaling transport in clays

Clays and claystones are used as backfill and barrier materials in the design of waste repositories, because they act as hydraulic barriers and retain contaminants. Transport through such barriers occurs mainly by molecular diffusion. There is thus an interest to relate the diffusion properties of clays to their structural properties. In previous work, we have developed a concept for up-scaling pore-scale molecular diffusion coefficients using a grid-based model for the sample pore structure. Here we present an operational algorithm which can generate such model pore structures of polymineral materials. The obtained pore maps match the rock’s mineralogical components and its macroscopic properties such as porosity, grain and pore size distributions. Representative ensembles of grains in 2D or 3D are created by a lattice Monte Carlo (MC) method, which minimizes the interfacial energy of grains starting from an initial grain distribution. Pores are generated at grain boundaries and/or within grains. The method is general and allows to generate anisotropic structures with grains of approximately predetermined shapes, or with mixtures of different grain types. A specific focus of this study was on the simulation of clay-like materials. The generated clay pore maps were then used to derive upscaled effective diffusion coefficients for non-sorbing tracers using a homogenization technique. The large number of generated maps allowed to check the relations between micro-structural features of clays and their effective transport parameters, as is required to explain and extrapolate experimental diffusion results. As examples, we present a set of 2D and 3D simulations and investigated the effects of nanopores within particles (interlayer pores) and micropores between particles. Archie’s simple power law is followed in systems with only micropores. When nanopores are present, additional parameters are required; the data reveal that effective diffusion coefficients could be described by a sum of two power functions, related to the micro- and nanoporosity. We further used the model to investigate the relationships between particle orientation and effective transport properties of the sample.