Effect of argon ion energy on the performance of silicon nitridemultilayer permeation barriers grown by hot-wire CVD on polymers

One of the authors (S.M.) acknowledges Direction des Relations Extérieures of Ecole Polytechnique for financial support.

Flexible organic–inorganic hybrid layer encapsulation for organic opto-electronic devices

In this work we produce and study the flexible organic–inorganic hybrid moisture barrier layers for the protection of air sensitive organic opto-electronic devices. The inorganic amorphous silicon nitride layer (SiNx:H) and the organic PMMA [poly (methyl methacrylate)] layer are deposited alternatingly by using hot wire chemical vapor deposition (HW-CVD) and spin-coating techniques, respectively. The effect of organic–inorganic hybrid interfaces is analyzed for increasing number of interfaces. We produce highly transparent (∼80% in the visible region) hybrid structures. The morphological properties are analysed providing a good basis for understanding the variation of the water vapor transmission rate (WVTR) values. A minimum WVTR of 4.5 × 10−5g/m2day is reported at the ambient atmospheric conditions for 7 organic/inorganic interfaces. The hybrid barriers show superb mechanical flexibility which confirms their high potential for flexible applications.

Optical properties of zirconium oxynitride films: the effect of composition, electronic and crystalline structures

tThis work is devoted to the investigation of zirconium oxynitride (ZrOxNy) films with varied opticalresponses prompted by the variations in their compositional and structural properties. The films wereprepared by dc reactive magnetron sputtering of Zr, using Ar and a reactive gas mixture of N2+ O2(17:3).The colour of the films changed from metallic-like, very bright yellow-pale and golden yellow, for low gasflows to red-brownish for intermediate gas flows. Associated to this colour change there was a significantdecrease of brightness. With further increase of the reactive gas flow, the colour of the samples changedfrom red-brownish to dark blue or even to interference colourations. The variations in composition dis-closed the existence of four different zones, which were found to be closely related with the variationsin the crystalline structure. XRD analysis revealed the change from a B1 NaCl face-centred cubic zirco-nium nitride-type phase for films prepared with low reactive gas flows, towards a poorly crystallizedover-stoichiometric nitride phase, which may be similar to that of Zr3N4with some probable oxygeninclusions within nitrogen positions, for films prepared with intermediate reactive gas flows. For highreactive gas flows, the films developed an oxynitride-type phase, similar to that of -Zr2ON2with someoxygen atoms occupying some of the nitrogen positions, evolving to a ZrO2monoclinic type structurewithin the zone where films were prepared with relatively high reactive gas flows. The analysis carriedout by reflected electron energy loss spectroscopy (REELS) revealed a continuous depopulation of thed-band and an opening of an energy gap between the valence band (2p) and the Fermi level close to 5 eV.The ZrN-based coatings (zone I and II) presented intrinsic colourations, with a decrease in brightness anda colour change from bright yellow to golden yellow, red brownish and dark blue. Associated to thesechanges, there was also a shift of the reflectivity minimum to lower energies, with the increase of thenon-metallic content. The samples lying in the two last zones (zone III, oxynitride and zone IV, oxide films)revealed a typical semi-transparent-optical behaviour showing interference-like colourations only dueto the complete depopulation of the d band at the Fermi level. The samples lying in these zones presentedalso an increase of the optical bandgap from 2 to 3.6 eV.

Quantifying, generating and mitigating radio interference in Low-Power Wireless Networks

Doctoral Programme in Telecommunication - MAP-tele

Optimization of magnetoelectric composites based on electroactive polymers for energy harvesting and sensor application

Tese de Doutoramento em Engenharia de Materiais.

Listening to the public: enacting power : citizen access, Standing and influence in public participation discourses

Public participation in environmental governance is typically associated with citizen access to power despite many closures and limitations having been identified in participatory processes. This article proposes an analytical framework to analyse discursive practices involved in public consultation processes. Critical Discourse Analysis is used to examine and appraise citizens’ access, standing and influence. We apply that framework to a ‘notice and comment’ process on a hydroelectric power plan in Portugal and show that it was discursively managed to justify the decision of constructing 10 large dams and to reject critical or alternative views. Citizens’ access, standing and influence were constrained through diverse discursive practices which (re)produced very unequal power relationsbetween policy proponents and participating individuals. More generally, the article illustrates the potential of Critical Discourse Analysis to assess voice(s) in policy processes. Focusing on argumentative, interactional and rhetorical levels, and how they are interwoven in public consultation discourses, the proposed framework is conceivably applicable in other studies.

Deposição não eletrolítica de filmes plasmónicos de ouro para biossensores

Dissertação de mestrado em Biofísica e Bionanossistemas

Electronic tongue: a versatile tool for mineral and fruit-flavored waters recognition

Natural mineral waters (still), effervescent natural mineral waters (sparkling) and aromatized waters with fruit-flavors (still or sparkling) are an emerging market. In this work, the capability of a potentiometric electronic tongue, comprised with lipid polymeric membranes, to quantitatively estimate routinely quality physicochemical parameters (pH and conductivity) as well as to qualitatively classify water samples according to the type of water was evaluated. The study showed that a linear discriminant model, based on 21 sensors selected by the simulated annealing algorithm, could correctly classify 100 % of the water samples (leave-one out cross-validation). This potential was further demonstrated by applying a repeated K-fold cross-validation (guaranteeing that at least 15 % of independent samples were only used for internal-validation) for which 96 % of correct classifications were attained. The satisfactory recognition performance of the E-tongue could be attributed to the pH, conductivity, sugars and organic acids contents of the studied waters, which turned out in significant differences of sweetness perception indexes and total acid flavor. Moreover, the E-tongue combined with multivariate linear regression models, based on sub-sets of sensors selected by the simulated annealing algorithm, could accurately estimate waters pH (25 sensors: R 2 equal to 0.99 and 0.97 for leave-one-out or repeated K-folds cross-validation) and conductivity (23 sensors: R 2 equal to 0.997 and 0.99 for leave-one-out or repeated K-folds cross-validation). So, the overall satisfactory results achieved, allow envisaging a potential future application of electronic tongue devices for bottled water analysis and classification.

El impacto de las normas y de la ideología sobre el procesamiento emocional, motivacional y cognitivo del comportamiento político de las elites de poder y la ciudadanía de Córdoba. Norms and ideologies impact on the emotional, motivational and cognitive processesing of power elite and citizen political behavior in Cordoba.

El presente estudio pretende arribar a la construcción de un modelo explicativo del comportamiento político a partir de la contribución que los marcos sociales (norma sociales, normas de ciudadanía, ideología, confianza política) y sociocognitivos (inteligencia afectiva, interés político, eficacia política, conocimiento político, sentimiento de comunidad) mostraron, en términos de relaciones entre las variables, sobre el mismo. Nuestra atención se centra no sólo al comportamiento político de la ciudadanía -que es donde se desarrollaron la mayor parte de los estudios-, sino a las elites de poder constitutivas del sistema político (jueces, legisladores provinciales y representantes de instituciones del gobierno y de organismos no gubernamentales). Asimismo, pretende establecer las diferencias que puedan evidenciarse en torno a la relación de estas variables con el comportamiento político entre los distintos colectivos estudiados en el ámbito de la ciudad de Córdoba. Para ello se realizara una primera etapa de estudio instrumental, con el objeto de analizar las propiedades psicométricas de los instrumentos a utilizar en la operacionalización de las variables. Para ello se tomara una muestra accidental de 250 personas entre 18 y 65 años de edad. Posteriormente, se realizarán dos etapas de estudio ex post facto, con la finalidad de construir los modelos planteados. En la primera de ellas, se trabajará con una muestra accidental de 100 representantes de los grupos de poder estudiados y en la segunda con una muestra probabilística de 500 ciudadanos cordobeses entre 18 y 65 años de edad.

Analisis De Mercados De Energía Eléctrica Competitivos Con Participación De Energía Eólica. Competitive Electricity Markets Analisis with Wind Power Generation.

La utilización de energía eólica es un hecho cada vez más común en nuestro mundo como respuesta a mitigar el creciente aumento de demanda de energía, los aumentos constantes de precio, la escasez de combustibles fósiles y los impactos del cambio climático, los que son cada día más evidentes.Consecuentemente, el interés por la participación de esta nueva forma de generación de energía en sistema eléctrico de potencia ha aumentado considerablemente en los últimos años. La incorporación de generación de origen eólico en el sistema eléctrico de potencia requiere de un análisis detallado del sistema eléctrico en su conjunto, considerando la interacción entre parques y unidades de generación eólica, plantas de generación convencional y el sistema eléctrico de potencia. La integración de generación de origen renovable en el sistema eléctrico de potencia convencional presenta nuevos desafíos los que pueden ser atribuidos a características propias de este tipo de generación, por ejemplo la fluctuación de energía debido a la naturaleza variable del viento, la naturaleza distribuida de la generación eólica y las características constructivas y método de conexión de los distintos modelos de turbinas eólicas al sistema.La finalidad de este proyecto de investigación consiste en investigar el impacto sobre un mercado de sistema eléctrico competitivo causado por el agregado de generación de origen eolico. Como punto de partida se pretende realizar modelos de plantas de generacion eolica para luego incorporarlos a los modelos de sistemas eléctricos y realizar estudios de de despacho económico, flujo de cargas, análisis transitorio y estudios dinámicos del sistema.

Coordinación socio-política. Redes de influencia y estructuras de poder en CórdobaSocio-political coordination. Influence Networks and power structures in Córdoba.

Los mecanismos de producción y reproducción de la influencia política es una importante área de estudio de la ciencia política en las últimas décadas. En la misma se han disputado diferentes teorías, desde las que plantean la influencia predominante de grupos de poder y sectores corporativos tanto en las decisiones del estado como en las no decisiones, hasta los que plantean que existe la puja de diferentes intereses dentro del Estado pero que no existe ningún grupo predominante. El análisis de redes (network analysis) permite estudiar este objeto mediante la observación de la estructura de relaciones de los actores influyentes dentro de la política provincial. En esta area de estudio, este proyecto propone estudiar de qué manera se produce y reproduce la influencia política en la Provincia de Córdoba.Las hipótesis que plantea el proyecto son las siguientes: H1- La estructura del poder socio-político provincial adquiere una configuración reticular en la que existe un núcleo de actores que representan intereses tradicionales organizados y permite un escaso acceso de nuevas organizaciones que defienden intereses sociales difusos. H2- En el proceso de influencia sociopolítica provincial operan mecanismos de influencia interpersonales directos e indirectos (Brokerage) que permiten a los actores acceder e influir en los decisores públicos. H3- En el proceso de influencia socio-política interviene una diversidad de recursos de poder que los actores utilizan para influir las políticas públicas. Para esto se propone como objetivos del proyecto los siguientes: 1- Identificar y analizar la estructura de poder e influencia que subyace a la política provincial. 2- Analizar los intereses, actores y sectores incluidos y excluidos de la estructura de influencia política. 3- Analizar los mecanismos y recursos de producción y reproducción del poder y la influencia. 4- Analizar las áreas de política del estado provincial que resultan lugar de influencia de los actores y sectores que configuran la estructura de poder socio-política. 5- Analizar el sistema de decisión colectiva (policy domain) en dos áreas de política provincial. 6- Analizar los recursos que posibilitan a los actores ejercer poder e influencia en las áreas de políticas estudiadas. Para la verificación empírica de las hipótesis se realiza un diseño de investigación que incluye el mapeo y análisis de dos tipos de redes políticas diferentes, la "red de influencia en la política provincial" y la red de influencia en un "área de políticas públicas". La reconstrucción de las redes políticas se realizará mediante entrevistas semi-estructuradas a actores sociales y políticos en un muestreo no probabilístico de tipo "bola de nieve". La investigación pretende realizar un aporte a la comprensión de la coordinación política y, en tal sentido, espera alcanzar una adecuada descripción y comprensión de los procesos de influencia y de estructuración del poder en la Provincia de Córdoba.

Impact of wind power generation on the electricity supply industry

The objective of this dissertation is to investigate the effect wind energy has on the Electricity Supply Industry in Ireland. Wind power generation is a source of renewable energy that is in abundant supply in Ireland and is fast becoming a resource that Ireland is depending on as a diverse and secure of supply of energy. However, wind is an intermittent resource and coupled with a variable demand, there are integration issues with balancing demand and supply effectively. To maintain a secure supply of electricity to customers, it is necessary that wind power has an operational reserve to ensure appropriate backup for situations where there is low wind but high demand. This dissertation examines the affect of this integration by comparing wind generation to that of conventional generation in the national grid. This is done to ascertain the cost benefits of wind power generation against a scenario with no wind generation. Then, the analysis examines to see if wind power can meet the pillars of sustainability. This entails looking at wind in a practical scenario to observe how it meets these pillars under the criteria of environmental responsibility, displacement of conventional fuel, cost competitiveness and security of supply.

The importance and accuracy of wind power forecasts

Due to the global crisis o f climate change many countries throughout the world are installing the renewable energy o f wind power into their electricity system. Wind energy causes complications when it is being integrated into the electricity system due its intermittent nature. Additionally winds intennittency can result in penalties being enforced due to the deregulation in the electricity market. Wind power forecasting can play a pivotal role to ease the integration o f wind energy. Wind power forecasts at 24 and 48 hours ahead of time are deemed the most crucial for determining an appropriate balance on the power system. In the electricity market wind power forecasts can also assist market participants in terms o f applying a suitable bidding strategy, unit commitment or have an impact on the value o f the spot price. For these reasons this study investigates the importance o f wind power forecasts for such players as the Transmission System Operators (TSOs) and Independent Power Producers (IPPs). Investigation in this study is also conducted into the impacts that wind power forecasts can have on the electricity market in relation to bidding strategies, spot price and unit commitment by examining various case studies. The results o f these case studies portray a clear and insightful indication o f the significance o f availing from the information available from wind power forecasts. The accuracy o f a particular wind power forecast is also explored. Data from a wind power forecast is examined in the circumstances o f both 24 and 48 hour forecasts. The accuracy o f the wind power forecasts are displayed through a variety o f statistical approaches. The results o f the investigation can assist market participants taking part in the electricity pool and also provides a platform that can be applied to any forecast when attempting to define its accuracy. This study contributes significantly to the knowledge in the area o f wind power forecasts by explaining the importance o f wind power forecasting within the energy sector. It innovativeness and uniqueness lies in determining the accuracy o f a particular wind power forecast that was previously unknown.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Power quality studies in distribution systems involving spectral decomposition

Distribution systems, eigenvalue analysis, nodal admittance matrix, power quality, spectral decomposition