Sistemas prisionais europeus

Ao longo dos últimos anos a reforma dos sistemas prisionais e a eficácia da reinserção social têm vindo a integrar as agendas políticas dos governos dos países europeus. Esta reforma deriva de vários problemas e carências com que se debatem os diversos sistemas prisionais, nomeadamente a sobrelotação, o ambiente propício à violência, o consumo de drogas, a inactividade do recluso e o elevado índice de reincidência criminal. Porém, qualquer reforma que se venha a delinear compreende matérias muito complexas que vão desde os direitos humanos aos recursos humanos e financeiros, imperativos legais, bem como a conciliação entre a punição e a ressocialização. Estas matérias não dependem apenas da vontade política, mas igualmente da sociedade, a qual ainda ergue barreiras à reinserção, tratando o ex-recluso como um excluído da sociedade. Neste sentido, os estudos universitários constituem um elemento chave na procura de soluções para esta problemática, na medida em que se servem das várias áreas do saber para de alguma forma contribuir com possíveis soluções, tendo em vista a melhoria de todo o sistema prisional e a eficácia da reinserção social. Esta dissertação tem assim como objectivo apresentar os principais modelos de sistemas prisionais adoptados em países europeus e efectuar uma comparação entre estes. Pretende-se retirar os aspectos mais relevantes de cada sistema e que têm contribuído para a melhoria das condições dos reclusos e do aumento da reinserção destes na sociedade, bem como na diminuição da taxa de reincidência criminal.

Possible artemisinin-based combination therapy-resistant malaria in Nigeria: a report of three cases

Artemisinin-based combination therapy-resistant malaria is rare in Sub-Saharan Africa. The World Health Organization identifies monitoring and surveillance using day-3 parasitaemia post-treatment as the standard test for identifying suspected artemisinin resistance. We report three cases of early treatment failure due to possible artemisinin-based combination therapy-resistant Plasmodium falciparum malaria. All cases showed adequate clinical and parasitological responses to quinine. This study reveals a need to re-evaluate the quality and efficacy of artemisinin-based combination therapy agents in Nigeria and Sub-Saharan Africa.

Stomoxys calcitrans as possible vector of Trypanosoma evansi among camels in an affected area of the Canary Islands, Spain

Introduction Trypanosoma evansi was first identified in the Canary Islands in 1997, and is still present in a small area of the Archipelago. To date, the disease has exclusively affected camel herds, and has not been detected in any other animal hosts. However potential vectors of Trypanosoma evansi must be identified. Methods One Nzi trap was placed on a camel farm located in the infected area for a period of one year. Results Two thousand five hundred and five insects were trapped, of which Stomoxys calcitrans was the sole hematophagous vector captured. Conclusions Stomoxys calcitrans could be exclusively responsible for the transmission of Trypanosoma evansi among camels in the surveyed area, as other species do not seem to be infected by S. calcitrans in the presence of camels.

Solution processed quantum dot photodetectors

To find sustainable solutions for the production of energy, it is necessary to create photovoltaic technologies that make every photon count. To pursue this necessity, in the present work photodetectors of zinc oxide embedded with nano-structured materials, that significantly raise the conversion of solar energy to electric energy, were developed. The novelty of this work is on the development of processing methodologies in which all steps are in solution: quantum dots synthesis, passivation of their surface and sol-gel deposition. The quantum dot solutions with different capping agents were characterized by UVvisible absorption spectroscopy, spectrofluorimetry, dynamic light scattering and transmission electron microscopy. The obtained quantum dots have dimensions between 2 and 3nm. These particles were suspended in zinc acetate solutions and used to produce doped zinc oxide films with embedded quantum dots, whose electric response was tested. The produced nano-structured zinc oxide materials have a superior performance than the bulk, in terms of the produced photo-current. This indicates that an intermediate band material should have been produced that acts as a photovoltaic medium for solar cells. The results are currently being compiled in a scientific article, that is being prepared for possible submission to Energy and Environmental Science or Nanoscale journals.

Production and characterization of electrospun composite fibers: confinement of thermosensitive microgels

Materials engineering focuses on the assembly of materials´ properties to design new products with the best performance. By using sub-micrometer size materials in the production of composites, it is possible to obtain objects with properties that none of their compounds show individually. Once three-dimensional materials can be easily customized to obtain desired properties, much interest has been paid to nanostructured poly-mers in order to build biocompatible devices. Over the past years, the thermosensitive microgels have become more common in the framework of bio-materials with potential applicability in therapy and/or diagnostics. In addition, high aspect ratio biopolymers fibers have been produced using the cost-effective method called electrospinning. Taking advantage of both microgels and electrospun fibers, surfaces with enhanced functionalities can be obtained and, therefore employed in a wide range of applications. This dissertation reports on the confinement of stimuli-responsive microgels through the colloidal electro-spinning process. The process mainly depends on the composition, properties and patterning of the precur-sor materials within the polymer jet. Microgels as well as the electrospun non-woven mats were investigated to correlate the starting materials with the final morphology of the composite fibers. PNIPAAm and PNIPAAm/Chitosan thermosensitive microgels with different compositions were obtained via surfactant free emulsion polymerization (SFEP) and characterized in terms of chemical structure, morphology, thermal sta-bility, swelling properties and thermosensitivity. Finally, the colloidal electrospinning method was carried out from spinning solutions composed of the stable microgel dispersions (up to a concentration of about 35 wt. % microgels) and a polymer solution of PEO/water/ethanol mixture acting as fiber template solution. The confinement of microgels was confirmed by Scanning Electron Microscopy (SEM). The electrospinning process was statistically analysed providing the optimum set of parameters aimed to minimize the fiber diameter, which give rise to electrospun nanofibers of PNIPAAm microgels/PEO with a mean fiber diameter of 63 ± 25 nm.

Development of an experimental setup for metal cutting research

Analytical, numerical and experimental models have been developed over time to try to characterize and understand the metal cutting process by chip removal. A true knowledge of the cutting process by chip removal is required by the increasing production, by the quality requirements of the product and by the reduced production time, in the industries in which it is employed. In this thesis an experimental setup is developed to evaluate the forces and the temperature distribution in the tool according to the orthogonal cutting model conditions, in order to evaluate its performance and its possible adoption in future works. The experimental setup is developed in a CNC lathe and uses an orthogonal cutting configuration, in which thin discs fixed onto a mandrel are cut by the cutting insert. In this experimental setup, the forces are measured by a piezoelectric dynamometer while temperatures are measured by thermocouples placed juxtaposed to the side face of the cutting insert. Three different solutions are implemented and evaluated for the thermocouples attachment in the cutting insert: thermocouples embedded in thermal paste, thermocouples embedded in copper plate and thermocouples brazed in the cutting insert. From the tests performed in the experimental setup it is concluded that the adopted forces measurement technique shows a good performance. Regarding to the adopted temperatures measurement techniques, only the thermocouples brazed in the cutting insert solution shows a good performance for temperature measurement. The remaining solutions show contact problems between the thermocouple and the side face of the cutting insert, especially when the vibration phenomenon intensifies during the cut. It is concluded that the experimental setup does not present a sufficiently robust and reliable performance, and that it can only be used in future work after making improvements in the assembly of the thermocouples.

Geopolymers as infill material for conservation of azulejos

The restoration materials currently used to fill gaps in architectural historical azulejos (e.g. lime or organic resin pastes) usually show serious drawbacks in terms of compatibility, effectiveness and durability. The existing solutions do not fully protect azulejos in outdoor conditions and frequently result in further deterioration. Geopolymers can be a potential solution for azulejo lacunae infill given the chemical-mineralogical similitude to the ceramic body, and also the durability and versatile range of physical properties that can be obtained through the manipulation of their formulation and curing conditions. This work presents and discusses the viability of the use of geopolymeric pastes to fill lacunae in azulejos or to act as “cold” cast ceramic tile surrogates reproducing missing azulejo fragments. The formulation of geopolymers, namely the type of activators, the aluminosilicate source, the amount of water (to meet adequate workability requirements) and curing conditions were studied. The need for post-curing desalination was also considered envisaging their application in the restoration of outdoor architectural historical azulejos frequently exposed to adverse environmental conditions. The possible advantages and disadvantages of the use of geopolymers in the conservation of azulejos are also discussed. Several techniques were used to study the chemical and physical behavior of geopolymers, namely FT-IR, XRD, MIP, SEM-EDS, WDXRF, electrical conductivity, open porosity, bending strength, adhesion strength, water vapour permeability, thermal expansion and hydric expansion. The results indicate that geopolymers are a promising material for restoration of azulejos, exhibiting some properties, such as adhesion to the ceramic substrate, higher than inorganic materials used nowadays, such as aerial lime based pastes.

Minimal computation structures for visual information applications based on printed electronics

In the early nineties, Mark Weiser wrote a series of seminal papers that introduced the concept of Ubiquitous Computing. According to Weiser, computers require too much attention from the user, drawing his focus from the tasks at hand. Instead of being the centre of attention, computers should be so natural that they would vanish into the human environment. Computers become not only truly pervasive but also effectively invisible and unobtrusive to the user. This requires not only for smaller, cheaper and low power consumption computers, but also for equally convenient display solutions that can be harmoniously integrated into our surroundings. With the advent of Printed Electronics, new ways to link the physical and the digital worlds became available. By combining common printing techniques such as inkjet printing with electro-optical functional inks, it is starting to be possible not only to mass-produce extremely thin, flexible and cost effective electronic circuits but also to introduce electronic functionalities into products where it was previously unavailable. Indeed, Printed Electronics is enabling the creation of novel sensing and display elements for interactive devices, free of form factor. At the same time, the rise in the availability and affordability of digital fabrication technologies, namely of 3D printers, to the average consumer is fostering a new industrial (digital) revolution and the democratisation of innovation. Nowadays, end-users are already able to custom design and manufacture on demand their own physical products, according to their own needs. In the future, they will be able to fabricate interactive digital devices with user-specific form and functionality from the comfort of their homes. This thesis explores how task-specific, low computation, interactive devices capable of presenting dynamic visual information can be created using Printed Electronics technologies, whilst following an approach based on the ideals behind Personal Fabrication. Focus is given on the use of printed electrochromic displays as a medium for delivering dynamic digital information. According to the architecture of the displays, several approaches are highlighted and categorised. Furthermore, a pictorial computation model based on extended cellular automata principles is used to programme dynamic simulation models into matrix-based electrochromic displays. Envisaged applications include the modelling of physical, chemical, biological, and environmental phenomena.

A critical review of the possible benefits associated with homeopathic medicine

OBJECTIVE: To evaluate the recent scientific research progress on homeopathy. METHODOLOGY: Homeopathy was evaluated in terms of its clinical research; in vitro research, and physical foundations. The Medline database was the main reference source for the present research, concerning data of approximately the last 10 years. Secondary references (not available in this database) were obtained by means of direct requests to authors listed in the primary references. RESULTS: Clinical studies and in vitro research indicate the inefficacy of homeopathy. Some few studies with positive results are questionable because of problems with the quality and lack of appropriate experimental controls in these studies. The most recent meta-analyses on the topic yielded negative results. One of the few previous meta-analyses with positive results had serious publication bias problems, and its results were later substantially reconsidered by the main authors. The sparse in vitro homeopathic research with positive results has not been replicated by independent researchers, had serious methodological flaws, or when replicated, did not confirm the initial positive results. A plausible mechanism for homeopathic action is still nonexistent, and its formulation, by now, seems highly unlikely. CONCLUSIONS: As a result of the recent scientific research on homeopathy, it can be concluded that ample evidence exists to show that the homeopathic therapy is not scientifically justifiable.

Coupling organic substrate removal to methane production in a fully biological microbial electrolysis cell

Microbial electrolysis cells (MECs) are an innovative and emerging technique based on the use of solid-state electrodes to stimulate microbial metabolism for wastewater treatment and simultaneous production of value-added compounds (such as methane). This research studied the performance of a two-chamber MEC in terms of organic matter oxidation (at the anode) and methane production (at the cathode). MEC‟s anode had been previously inoculated with an activated sludge, whereas the cathode chamber inoculum was an anaerobic sludge (containing methanogenic microorganisms). During the experimentation, the bioanode was continuously fed with synthetic solutions in anaerobic basal medium, at an organic load rate (OLR) of around 1 g L-1 d-1, referred to the chemical oxygen demand (COD). At the beginning (Run I), the feeding solution contained acetate and subsequently (Run II) it was replaced with a more complex solution containing soluble organic compounds other than acetate. For both conditions, the anode potential was controlled at -0.1 V vs. standard hydrogen electrode, by means of a potentiostat. During Run I, over 80% of the influent acetate was anaerobically oxidized at the anode, and the resulting electric current was recovered as methane at the cathode (with a cathode capture efficiency, CCE, accounting around 115 %). The average energy efficiency of the system (i.e., the energy captured into methane relative to the electrical energy input) under these conditions was over 170%. However, reactor‟s performance decreased over time during this run. Throughout Run II, a substrate oxidation over 60% (on COD basis) was observed. The electric current produced (57% of coulombic efficiency) was also recovered as methane, with a CCE of 90%. For this run the MEC‟s average energy efficiency accounted for almost 170 %. During all the experimentation, a very low biomass growth was observed at the anode whereas ammonium was transferred through the cationic membrane and concentrated at the cathode. Tracer experiments and scanning electron microscopy analyses were also carried out to gain a deeper insight into the reactor performance and also to investigate the possible reasons for partial loss of performance. In conclusion, this research suggests the great potential of MEC to successfully treat low-strength wastewaters, with high energy efficiency and very low sludge production.

Design of bio-inspired ionic liquids for protein stabilisation

Ionic Liquids (ILs) consist in organic salts that are liquid at/or near room temperature. Since ILs are entirely composed of ions, the formation of ion pairs is expected to be one essential feature for describing solvation in ILs. In recent years, protein - ionic liquid (P-IL) interactions have been the subject of intensive studies mainly because of their capability to promote folding/unfolding of proteins. However, the ion pairs and their lifetimes in ILs in P-IL thematic is dismissed, since the action of ILs is therefore the result of a subtle equilibrium between anion-cation interaction, ion-solvent and ion-protein interaction. The work developed in this thesis innovates in this thematic, once the design of ILs for protein stabilisation was bio-inspired in the high concentration of organic charged metabolites found in cell milieu. Although this perception is overlooked, those combined concentrations have been estimated to be ~300 mM among the macromolecules at concentrations exceeding 300 g/L (macromolecular crowding) and transient ion-pair can naturally occur with a potential specific biological role. Hence the main objective of this work is to develop new bio-ILs with a detectable ion-pair and understand its effects on protein structure and stability, under crowding environment, using advanced NMR techniques and calorimetric techniques. The choline-glutamate ([Ch][Glu]) IL was synthesized and characterized. The ion-pair was detected in water solutions using mainly the selective NOE NMR technique. Through the same technique, it was possible to detect a similar ion-pair promotion under synthetic and natural crowding environments. Using NMR spectroscopy (protein diffusion, HSQC experiments, and hydrogen-deuterium exchange) and differential scanning calorimetry (DSC), the model protein GB1 (production and purification in isotopic enrichment media) it was studied in the presence of [Ch][Glu] under macromolecular crowding conditions (PEG, BSA, lysozyme). Under dilute condition, it is possible to assert that the [Ch][Glu] induces a preferential hydration by weak and non-specific interactions, which leads to a significant stabilisation. On the other hand, under crowding environment, the [Ch][Glu] ion pair is promoted, destabilising the protein by favourable weak hydrophobic interactions , which disrupt the hydration layer of the protein. However, this capability can mitigates the effect of protein crowders. Overall, this work explored the ion-pair existence and its consequences on proteins in conditions similar to cell milieu. In this way, the charged metabolites found in cell can be understood as key for protein stabilisation.

Unilever food solutions new digital CRM platform- what is the combination of tools, processes and content that will help Unilever food solutions grow his business?

Unilever Food Solutions new digital CRM1 Platform - What is the combination of tools, processes and content that will help Unilever Food Solutions grow his business? Unilever Food Solutions (UFS) intend to create a new online platform to enable it to communicate with segments of the markets, which have previously been too difficult to reach. Specifically targeted at Chefs and other food professionals, the aim is to create an interactive website, which delivers value to its intended users by providing a variety of relevant content and functions, while simultaneously opening up a potential transactional channel to those same users.

MODELES DES TRANSFERTS RADIATIFS A L'INTERIEUR DES COUVERTS VEGETAUX LES SOLUTIONS ANALYTIQUES

Cette étude décrit la modélisation mathématique des transferts radiatifs en milieu végétal, en focalisant l'attention sur le régime du rayonnement solaire au sein des couverts végétaux homogènes. Le rayonnement solaire est traité en quatre composantes principales: rayonnement primaire et complémentaire, chacune de ces parties étant constituée des composantes directe et diffuse. On a présenté, dans un contexte assez général, les équations différentielles ou les systèmes d'équations différentielles qui gouvernent les différents processus de interaction rayonnement-végétation, et des solutions analytiques sont proposées pour les différentes composantes.

Role of Intersectoral Collaboration in Mental Health Policy Formulation And Service Delivery in Saint Lucia

RESUMO: Santa Lúcia pequena ilha de país em desenvolvimento com recursos limitados e é confrontada com uma série de desafios socioeconômicos que exigem soluções criativas e inovadoras. É comprovado que a combinação de recursos entre setores para estabelecer os determinantes social, econômico e ambiental da saúde são uma estratégia útil para melhorar a saúde da população, principalmente a sua saúde mental. Este estudo, o primeiro do seu tipo em Santa Lúcia, procurou examinar até que ponto a disponibilidade de uma política nacional de saúde mental levou a ação intersetorial para o fornecimento de serviços e promoção da saúde mental. Além disso, o estudo examinou o nível de colaboração intersetorial que existe entre as agências que prestam cuidados diretos e serviços de suporte para pessoas com doenças mentais e problemas sérios de saúde mental. O estudo também teve como objetivo identificar os fatores que promovem ou dificultam a colaboração intersectorial e gerar recomendações que possam ser aplicadas para países muito pequenos e com perfis socioeconômicos semelhantes. Os dados gerados a partir de três (3) fontes foram sintetizados para formar uma visão ampla das questões. Uma avaliação da política de saúde mental de 2007, uma avaliação que identifica até que ponto a ação intersetorial atualmente deixa a prestação de serviços de saúde mental e a administração de entrevistas semiestruturadas nas mãos de gestores do programa de diferentes agências em todos os setores. O estudo concluiu que, apesar da disponibilidade de uma política de saúde mental, que articula clara e explicitamente a colaboração intersetorial como área prioritária para ação, quase não existe no sistema de fornecimento atual do serviço. Os provedores de serviços em todos os setores reconhecem que há os benefícios da colaboração intersectorial e com entraves significativos em relação à colaboração intersetorial, que por sua vez, impede uma abordagem nacional para o planejamento e o fornecimento do serviço. A colaboração intersetorial não será possível se os próprios setores dependerem da abordagem direta do setor da saúde ou se a atmosfera geral for ofuscada pela estigmatização das doenças mentais.------------------------------------------------------------------------ABSTRACT: Saint Lucia a small island developing country with limited resources, is faced with a number of socio-economic challenges which require creative and innovative solutions to address. Combining resources across sectors to address the social, economic and environmental determinants of health has proven to be a useful strategy for improving population health in particular mental health. This study, the first of its kind for Saint Lucia sought to examine the extent to which the availability of a national mental health policy led to intersectoral action for mental health promotion and service delivery. In addition the study examined the level of intersectoral collaboration which actually exist between agencies which provide direct care and support services to people with mental illnesses and significant mental health problems. The study also aimed to identify the factors which promote or hinder intersectoral collaboration and generate recommendations which can be applied to extremely small countries with similar socio-economic profiles. Data generated from three (3) sources was synthesized to form a broad picture of the issues. An evaluation of the mental health policy of 2007, an assessment of the extent to which intersectoral action currently exist in mental health service delivery and the administration of semi-structured interviews with program managers from different agencies across sectors to identify implementation issues. The study concluded that despite the availability of a mental health policy which clearly and explicitly articulates intersectoral collaboration as a priority area for action, very little exists in the current service delivery system. Services providers across sectors acknowledge the benefits of intersectoral collaboration and that there are significant barriers to intersectoral collaboration, which in turn hinders a national approach to service planning and delivery. Intersectoral collaboration is not possible if sectors themselves are dependent on a top-down health sector driven and dominated approach, or if the general atmosphere is clouded by stigmatization of mental health illnesses.

Field oriented control of an axial flux permanent magnet synchronous motor for traction solutions

Electric Vehicles (EVs) are increasingly used nowadays, and different powertrain solutions can be adopted. This paper describes the control system of an axial flux Permanent Magnet Synchronous Motor (PMSM) for EVs powertrain. It is described the implemented Field Oriented Control (FOC) algorithm and the Space Vector Modulation (SVM) technique. Also, the mathematical model of the PMSM is presented. Both, simulation and experimental, results with different types of mechanical load are presented. The experimental results were obtained using a laboratory test bench. The obtained results are discussed.