Are we too busy to volunteer? The relationship between time and volunteering using the 1997 ABS Time Use Data

Time availability is a key concept in relation to volunteering, leading to organisations and governments targeting those outside paid work as a potential source of volunteers. It may be that factors such as a growth in female participation in the labour market and an increase in work hours will lead to more people saying they are simply too busy to volunteer This paper discusses how social and economic change, such as changing work patterns, are impacting on time availability. Using the 1997 ABS Time Use data, it identifies a predictive model of spare time by looking at demographic, life stage and employment related variables. Results confirm that those outside paid work, particularly the young, males and those without partners or children, are the groups most likely to have time to spare. These groups do not currently report high rates of volunteering. The paper concludes by questioning the premise that people will volunteer simply because they have time to spare. This is just one component of a range of motivations and factors that influence the decision to volunteer.

Acute high-intensity interval training improves T-vent and peak power output in highly trained males.

This study examined the effects of four high-intensity interval-training (HIT) sessions performed over 2 weeks on peak volume of oxygen uptake (VO2peak), the first and second ventilatory thresholds (UT VT2) and peak power output (PPO) in highly trained cyclists. Fourteen highly trained male cyclists (VO2peak = 67.5 +/- 3.7 ml . kg(-1) . min(-1)) performed a ramped cycle test to determine VO2peak VT1 VT2, and PPO. Subjects were divided equally into a HIT group and a control group. The HIT group performed four HIT sessions (20 x 60 s at PPO, 120 s recovery); the V-02peak test was repeated <I wk after the HIT program. Control subjects maintained their regular training program and were reassessed under the same timeline. There was no change in V0(2peak) for either group; however, the HIT group showed a significantly greater increase in VT1, (+22% vs. -3%), VT2 (+15% vs. -1%), and PPO (+4.3 vs. -.4%) compared to controls (all P <.05). This study has demonstrated that HIT can improve VT1, VT2,, and PPO, following only four HIT sessions in already highly trained cyclists.

The prevention of mental disorders in young people

The prevention of some mental disorders in young people appears to be possible. Several small and medium randomised controlled trials show that some anxiety, affective and substance-use disorders can be prevented. These trials show that the interventions are efficacious, but whether they will be effective in routine practice is not known. The evidence is sufficiently good to warrant a large community trial in which the roll-out is staged and school communties evaluated before and after the roll-out.

Review of stress corrosion cracking of pipeline steels in "low" and "high" pH solutions

This paper reviews the current understanding of the mechanisms of stress corrosion cracking of pipeline steels. The similarities, the differences and the influencing factors are considered for the high pH stress corrosion cracking caused by a concentrated bicarbonate-carbonate solution, and for the low pH stress corrosion cracking due to a diluter solution. For high pH stress corrosion cracking, it is well accepted that the mechanism involves anodic dissolution for crack initiation and propagation. In contrast, it has been suggested that the low pH stress corrosion cracking is associated with the dissolution of the crack tip and sides, accompanied by the ingress of hydrogen into the pipeline steel. But the precise influence of hydrogen on the mechanism needs to be further studied. (C) 2003 Kluwer Academic Publishers.

Perioperative epidural analgesia and outcome after major abdominal surgery in high-risk patients

In a primary analysis of a large recently completed randomized trial in 915 high-risk patients undergoing major abdominal surgery, we found no difference in outcome between patients receiving perioperative epidural analgesia and those receiving IV opioids, apart from the incidence of respiratory failure. Therefore, we performed a selected number of predetermined subgroup analyses to identify specific types of patients who may have derived benefit from epidural analgesia. We found no difference in outcome between epidural and control groups in subgroups at increased risk of respiratory or cardiac complications or undergoing aortic surgery, nor in a subgroup with failed epidural block (all P > 0.05). There was a small reduction in the duration of postoperative ventilation (geometric mean [SD]: control group, 0.3 [6.5] h, versus epidural group, 0.2 [4.8] h, P = 0.048). No differences were found in length of stay in intensive care or in the hospital. There was no relationship between frequency of use of epidural analgesia in routine practice outside the trial and benefit from epidural analgesia in the trial. We found no evidence that perioperative epidural analgesia significantly influences major morbidity or mortality after major abdominal surgery.

Patterns of co-morbidity between alcohol use and other substance use in the Australian population

The present study describes patterns of co-morbidity between alcohol use and other substance use problems in the Australian population using data from the 1997 National Survey of Mental Health and Well-Being. Multiple regression analyses examined whether the observed associations between alcohol and other drug use disorders were explained by other variables, including demographic characteristics and neuroticism. We also assessed whether the presence of co-morbid substance use disorders affected treatment seeking for a mental health problem. Alcohol use was related strongly to the use of other substances. Those who did not report alcohol use within the past 12 months were less likely to report using tobacco, cannabis, sedatives, stimulants or opiates. Higher rates again were observed among those with alcohol use disorders: half (51%) of those who were alcohol-dependent were regular tobacco smokers, one-third had used cannabis (32%); 15% reported other drug use; 15% met criteria for a cannabis use disorder and 7% met criteria for another drug use disorder. These associations were not accounted for by the demographic and other variables considered here. Co-morbid substance use disorders (sedatives, stimulants or opioids) predicted a high likelihood of seeking treatment for a mental health problem among alcohol-dependent people.

The preparation and readiness for voluntary movement: a high-field event-related fMRI study of the Bereitschafts-BOLD response

Activity within motor areas of the cortex begins to increase 1 to 2 s prior to voluntary self-initiated movement (termed the Bereitschaftspotential or readiness potential). There has been much speculation and debate over the precise source of this early premovement activity as it is important for understanding the roles of higher order motor areas in the preparation and readiness for voluntary movement. In this study, we use high-field (3-T) event-related fMRI with high temporal sampling (partial brain volumes every 250 ms) to specifically examine hemodynamic response time courses during the preparation, readiness, and execution of purely self-initiated voluntary movement. Five right-handed healthy volunteers performed a rapid sequential finger-to-thumb movement performed at self-determined times (12-15 trials). Functional images for each trial were temporally aligned and the averaged time series for each subject was iteratively correlated with a canonical hemodynamic response function progressively shifted in time. This analysis method identified areas of activation without constraining hemodynamic response timing. All subjects showed activation within frontal mesial areas, including supplementary motor area (SMA) and cingulate motor areas, as well as activation in left primary sensorimotor areas. The time courses of hemodynamic responses showed a great deal of variability in shape and timing between subjects; however, four subjects clearly showed earlier relative hemodynamic responses within SMA/cingulate motor areas compared with left primary motor areas. These results provide further evidence that the SMA and cingulate motor areas are major contributors to early stage premovement activity and play an important role in the preparation and readiness for voluntary movement. (C) 2003 Elsevier Inc. All rights reserved.

Millennial and orbital variations of El Nino/Southern Oscillation and high-latitude climate in the last glacial period

The El Nino/Southern Oscillation (ENSO) phenomenon is believed to have operated continuously over the last glacial interglacial cycle(1). ENSO variability has been suggested to be linked to millennial-scale oscillations in North Atlantic climate during that time(2,3), but the proposals disagree on whether increased frequency of El Nino events, the warm phase of ENSO, was linked to North Atlantic warm or cold periods. Here we present a high-resolution record of surface moisture, based on the degree of peat humification and the ratio of sedges to grass, from northern Queensland, Australia, covering the past 45,000 yr. We observe millennial-scale dry periods, indicating periods of frequent El Nino events ( summer precipitation declines in El Nino years in northeastern Australia). We find that these dry periods are correlated to the Dansgaard - Oeschger events - millennial-scale warm events in the North Atlantic climate record - although no direct atmospheric connection from the North Atlantic to our site can be invoked. Additionally, we find climatic cycles at a semiprecessional timescale (, 11,900 yr). We suggest that climate variations in the tropical Pacific Ocean on millennial as well as orbital timescales, which determined precipitation in northeastern Australia, also exerted an influence on North Atlantic climate through atmospheric and oceanic teleconnections.

In Australia are people born in other countries at higher risk of road trauma than locally born people?

This study examined whether people born in other countries had higher rates of death and hospitalization due to road crashes than people born in Australia. Data on deaths that occurred in the whole of Australia between 1994 and 1997 and hospitalizations that occurred in the state of New South Wales, Australia, between I July 1995 and 30 June 1997 due to road crashes were analyzed. The rates of death and hospitalization, adjusted for age and area of residence, were calculated using population data from the 1996 Australian census. The study categorized people born in other countries according to the language (English speaking, non-English speaking) and the road convention (left-hand side, right-hand side) of their country of birth. Australia has the left-hand side driving convention. The study found that drivers born in other countries had rates of death or hospitalization due to road trauma equal to or below those of Australian born drivers. In contrast, pedestrians born in other countries, especially older pedestrians had higher rates of death and hospitalization due to road crashes. Pedestrians aged 60 years or more born in non-English speaking countries where traffic travels on the right-hand side of the road had risks about twice those of Australian born pedestrians in the same age group. (C) 2003 Elsevier Ltd. All rights reserved.

A study of high-speed milling characteristics of nitinol

High-speed milling (HSM) has many advantages over conventional machining. Among these advantages, the lower cutting force associated with the machining process is of particular significance for Nitinol alloys because their machined surfaces show less strain hardening. In this article, a systematic study has been carried out to investigate the machining characteristics of a Ni50.6Ti49.4 alloy in HSM. The effects of cutting speed, feed rate, and depth of cut on machined surface characteristics and tool wear are studied. It is found that an increase in cutting speed has resulted in a better surface finish and less work hardening. This is attributed to the reduction of chip cross-sectional area or chip thickness, which thus leads to a lower cutting force or load.