927 resultados para Ponta Grossa dike swarms
Resumo:
Pós-graduação em Agronomia (Energia na Agricultura) - FCA
Resumo:
The granitic massif Capão Bonito is located in the southwest of the State of São Paulo and is associated with Neoproterozoic evolution of Central Mantiqueira Province. Its rocks outcrop along the edge of the Paraná Basin in a body with elongated shape whose major axis has a general NE-SW, covering an area of approximately 110km2. Occurs in intrusive epimetamorphic rocks of Votuverava Formation, Acungui Group and granitic rocks of the Três Córregos Complex and their placement is related to a brittle tectonics of NE-SW direction shear zones. In metasediments, when preserved from deformational features imposed by mylonitic deformation, preserve up textures and mineralogy of contact metamorphism with development of mineral in albite-epidote and hornblende hornfels facies. The Massif Capão Bonito consists of red syenogranites, holo-leucocratic with biotite and rare hornblende, medium to coarse inequigranulars and isotropic lightly mylonitic and / or cataclastic in marginal regions. Commercially are called Vermelho Capão Bonito and for export as Ruby Red Granite. Rocks belonging to the calcium-alkaline high potassium to shoshonitic series or the series subalkaline potassic and metaluminous to peraluminous character. The magmatism is compatible with granite type A, tardi-orogenic to anorogenic of intraplate environment, from the crust material with lower melting emplacement associated with correlated transtensive structure to shear zones in an extensional environment at the end of collisional event of Orogênese Ribeira. Metamorphism occurred in the region in the greenschist facies, low to medium, generating quartzites, phyllites, schists, and calcium-silicate metabasics
Resumo:
This research evaluated corn grains with flint and dent texture (ensiled high-moisture or dried), submitted to grinding degrees, using the in situ ruminal degradation technique. Three rumen canulated adult sheeps were used in a complete randomized design, using a factorial outline 2 x 2 x 3, with two corn hybrids (flint and dent texture), two conservation methods (ensiled high-moisture and dry) and three grinding degress (whole, coarsely and finely ground, corresponding to the sieve of 12; 10 and 8 mm). Starch soluble fraction (A) of the dent hybrid ensiled corn grains was greater comparing to the dry materials and in both conservation forms this fraction was reduced in the flint texture hybrid, while the insoluble fraction potentially degradable (B) the opposite occurred. The degradation potential was higher in grains ensiled in two textures. The ensiled allowed more starch effective degradation in relation to dry grain in two textures and the grains dent texture hybrid also increased such degradation in both conservation methods. The dent texture and the ensiled high-moisture grains proved the best option considering the starch degradability. Regardless of the conservation forms, the grains of corn hybrid flint texture should be finely ground, for providing higher ruminal degradation, while for the dent texture hybrid, the coarsely and whole grinding are the most suitable for ensiled and dry grain, respectively.
Resumo:
Due to its nutritional characteristics sorghum has been indicated as substitute cereal to corn and wheat. Besides, in Brazil sorghum is not used for human feeding unlike corn, witch reduces its costs in almost 20% in comparison to corn costs. This research was conducted at UNESP, in Botucatu and Jaboticabal Campus, São Paulo, Brazil, with the purpose to evaluate the grinding effect on two sorghum genotypes grain (with and without tannin) preserved dry or ensiled humid above the degradability in situ of the dry matter, crude protein and starch. Three rumen fistulated sheep were used, distributed in an experimental block design, at 2 x 2 x 3 factorial outline, with two sorghum genotypes (with and without tannin), two forms of conservation (dry grain and high moisture grains silage) and three grinding ways (undivided, thick grinding and fine grinding) and the time as sub-portion. According to the results the grinding is recommended to sorghum grains because it increases the ruminal and effective degradability of the dry matter, crude protein and starch. The presence of tannin in sorghum grain changed the degrability potential of crude protein and starch. The thick grinding in dry grain without tannin was the better treatment.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
The application technology shows many parameters related to the quality of the application, one is the droplet spectrum, which is influenced by the spray nozzles and the adjuvant used. Therefore, the objective of this work was estimate the behavior of the droplet spectrum generated with different nozzles and different adjuvants. The experiment was installed containing four solutions from different type adjuvant dilution, as vegetal oil, mineral oil, surfactant and drift reduction, which were applied with two nozzle, one pre-orifice flat fan (DG 8003 VS) and other of air induction flat fan (AI 8003 VS), totaling 8 treatments with 3 repetitions. The experiment was realized in ideal weather conditions for spraying. The treatments averages were compared using Confidence Interval at 95% probability and the correlations between variables were analyzed using Pearson at 5% of probability. The analysis of droplet spectrum showed different behavior for each adjuvant and nozzle. The surfactant treatment showed VMD superior for all treatments when sprayed with AI nozzles. For the %vol.<100 µm the lowest value found was for the AI nozzle in combination with the surfactant. The significant correlations found for the nozzles AI and DG were negative between VMD and %vol.<100 µm. It can be concluded that the values of DMV and %vol.<100 µm showed that the nozzle with pre-orifice have droplet spectrum more prone to drift. The surfactant showed to be the best drift reduction technique when combined with the AI nozzle.
Resumo:
The aim of this study was to build and validate a low cost reduced-scale wind tunnel for drift evaluation on pesticide application technology. The work was carried out at the NEMPA - Núcleo de Ensaio de Máquinas e Pneus Agroflorestais (NEMPA), FCA/UNESP, Departamento de Engenharia Rural, Botucatu/SP, Brazil. The wind tunnel main characteristics were an open circuit and a closed working section with a fan blowing air into the tunnel. Screens were fitted downstream after the fan in order to stabilize the air flow on the working section. The tunnel was built with 3.0 mm eucalyptus hardboard, with a total length of 4.8 m and a squared section of 0.56 m. The air flow was provided by a 180 W axial fan. The system was adjusted and calibrated to provide a laminar and stable flow at 2.0 m s-1. Validation studies were carried out by using a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) to apply a spray solutions containing water plus a food dye (Blue FDC) at 0,6% m v-1 mixed with two adjuvants: a polymer based anti drift formulation at 0,06% m v-1 and a sodium lauryl ether sulfate based surfactant at 0,2% v v-1. After a 10-second application the drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The wind tunnel had low levels of turbulence and high repeatability of the data, which means that the flow was uniform and able to be used for carrying out measures to estimate drift. The validation results showed that the tunnel was effective to enable comparative drift measurements on the spray solution used in this work making possible the evaluation of drift risk potential under those spray technologies. The use of an adjuvant based on a polymer reduced the amount of drift from the nozzle compared to the surfactant.
Resumo:
The aim of this work was to evaluate the effect of the addition of different surfactants in physical and chemical properties of spray solutions, droplets spectra and drift potential on agricultural spraying. The surfactants and concentrations (v v-1) were: Haiten (0.1%), Antideriva and Intec (0.05% and 0.1%). The following characteristics were analyzed: surface tension, viscosity, density and electric conductivity. The droplet size spectrum was determined by a laser particle analyzer (Mastersizer S®, version 2.15) including measurements of volume medium diameter (VMD), the percent of droplets below 50 and 100 μm (V50 e V100) and index span. In order to estimate the drift potential, a series of wind tunnel tests were performed with a Teejet XR 8003 flat fan nozzle at 200 kPa (medium droplets) used to apply the spray solutions containing water, the adjuvants and a food color dye (Brilliant blue FD & C no 1) at 0,6% m v-1. The drift was collected on nylon strips transversally fixed along the tunnel at different distances from the nozzle and different high from the bottom part of the tunnel. Drift deposits were evaluated by spectrophotometry. The results showed that the addition of adjuvants changed physical and chemical properties of spray solutions in different magnitudes according to the surfactant. Surfactants changed the droplet spectrum and drift potential, indicating that higher VMD and smaller V100 induced higher percentage of drift.
Resumo:
O objetivo deste trabalho foi avaliar diferentes pontas e taxas de pulverização na deposição de calda na cultura do milho e nas plantas daninhas Euphorbia heterophylla e Brachiaria plantaginea, localizadas nas linhas e nas entrelinhas da cultura. O experimento foi conduzido em delineamento de blocos ao acaso, em esquema fatorial 2 x 2 (2 pontas de pulverização DG 11002 VS (jato plano e gotas médias) e TXVK08 (jato cônico e gotas muito finas) x 2 taxas de aplicação, 100 e 200 L ha-1) com quatro repetições. As aplicações ocorreram aos 13 dias após a germinação do milho (3 a 5 folhas expandidas), as plantas de E. heterophylla apresentavam de 2 a 4 folhas e as plantas de B. plantaginea de 2 a 3 folhas. Utilizou-se como marcador o corante Azul Brilhante (FD&C-1) na concentração de 3000 ppm. Conclui-se que os maiores depósitos médios nas plantas de milho foram proporcionados pela ponta TXVK08, independente da taxa utilizada e que os depósitos mais uniformes ocorreram quando utilizou-se a taxa de 200 L ha-1. Para as plantas daninhas localizadas na linha da cultura, as pontas de pulverização promoveram depósitos de calda mais uniformes na B. plantaginea do que na E. heterophylla, em ambas as taxas de aplicação. Para a B. plantaginea localizadas na entrelinha da cultura a ponta DG 11002VS foi a que proporcionou depósitos de gotas mais uniformes, sendo que para E. heterophylla a ponta mais eficiente em depositar gotas foi a TXVK08.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The proposed work is located in education field in exhibition spaces of art and seeks to analyze a process of formation as a mediator focusing on the public's relationship with art, taking into account the fact that often the general public does not dominate the codes of this area, being incumbent upon mediator introduce them. One of the main points to be analyzed is the impact that can be generated by the contact of the visitor with the mediator in the exhibition space, considering a spectrum of possibilities, where at one end focuses the belonging and in the other the symbolic violence. In this direction this research aims to build a relationship of emancipation and autonomy of both, the educator and the visitor. It is known that the concept of public is a generalization, therefore, the analysis of the mediation process, are having as support the experiences lived by the mediator, especially, in the relationship with the lay public. The locations of the experiences lived, were the SESC Pompéia and the Pavilion of the Bienal of São Paulo, different places, but both with the potential to generate reception and / or distances, shot through space (architecture), bodies, codes, accesses, works of art, repertoires, expographic and especially through the mobilization of educator front of all these issues. The cutting of the research covers the experience of the educator (as an intern and professional) in six exhibitions, in these two spaces, between the years 2010 to 2015.
Resumo:
This work talks about the importance of the steel adhesion to concrete, reinforced concrete structures, their testing and forms of measurement used and how the results are used in the structural design, which uses as a reference the NBR 6118 and NBR 7480. It also deals with the importance of a reliable assessment, discussing failures that the test used, NBR 7477, features in specific circumstances, as discussed under the EC-094. It also presents an initial proposal for simplified pullout test, which aims to analyze the grip on steel bars with diameter less than 10 mm, which results when used standardized testing by ABNT NBT 7477, has shown excessive variability, the main criticism of the trial today used without distinction to be established thick or thin bars. The proposal also presented methodology is in the consolidation phase, given the time and the volume of necessary tests. For this reason it is not possible to make a comparison between the values obtained and the results of the test used on the basis of the standard in force, this can only be done once the front with a continuation of this work
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
The proposed work is located in education field in exhibition spaces of art and seeks to analyze a process of formation as a mediator focusing on the public's relationship with art, taking into account the fact that often the general public does not dominate the codes of this area, being incumbent upon mediator introduce them. One of the main points to be analyzed is the impact that can be generated by the contact of the visitor with the mediator in the exhibition space, considering a spectrum of possibilities, where at one end focuses the belonging and in the other the symbolic violence. In this direction this research aims to build a relationship of emancipation and autonomy of both, the educator and the visitor. It is known that the concept of public is a generalization, therefore, the analysis of the mediation process, are having as support the experiences lived by the mediator, especially, in the relationship with the lay public. The locations of the experiences lived, were the SESC Pompéia and the Pavilion of the Bienal of São Paulo, different places, but both with the potential to generate reception and / or distances, shot through space (architecture), bodies, codes, accesses, works of art, repertoires, expographic and especially through the mobilization of educator front of all these issues. The cutting of the research covers the experience of the educator (as an intern and professional) in six exhibitions, in these two spaces, between the years 2010 to 2015.