Language legislation in Ireland and the United Kingdom: Exploring the gaps between theory and practice

The central objective in this thesis is to explore the gaps between the normative justifications advanced for language rights and language legislative protection and the effective realisation of those rights and legislative provisions in practice. This objective is achieved by examining the scope and application of language rights and legislative provisions within language legislation in Ireland and the United Kingdom. Drawing on Canadian jurisprudence advocating for language rights to be recognised as “purposeful”, the thesis considers the extent to which Ireland and the United Kingdom have limited the acceptance of positive obligations as they relate to the provision of language services in the public sphere. In arguing that language rights are distinct in nature, the thesis suggests that in order for language rights to be effectively realised, an approach to language rights and language legislation more generally must be underpinned by a substantive vision of equality, otherwise language rights and legislative provisions merely amount to symbolic recognition and vacuous rhetoric as opposed to being substantive and enabling rights and provisions. Having said that, the thesis also recognises and elucidates the practical difficulties that arise in the realisation of language rights and language legislative provisions and in doing so seeks to stimulate further dialogue about the nature and limits of language rights and language legislation.

Theme and variations: Christianity and regional landscapes in early medieval Ireland

This thesis explores the impact of Christianity on the landscape in Ireland from the conversion period to the coming of the Anglo-Normans. The premise is that ecclesiastical and secular settlement formed a cohesive whole which characterised the societal organisation of early medieval Ireland. The matter of the thesis is to isolate some of the agents of cohesion to see was this homogenous or did it vary in different areas. One of these agents was the ownership of land and the thesis undertakes to identify ecclesiastical landholding and examine the manner of settlement on it. A corollary is to explore the contribution of the genealogical link between kin-group, founding saint and territory to the construction of local identities. This necessitated a narrow focus; thus small study areas were chosen, which approximated to early medieval kingdoms in North Louth, Rathdown, Co Dublin and Ross, Co Cork. A multidisciplinary approach was taken using both archaeological and documentary evidence. The thesis found ecclesiastical sites were at the same density through the study areas, but there were considerable regional variations in related secular settlement. Ecclesiastical estates were identified in the three study areas and common settlement patterns were found in two of them. Settlement in all areas indicated the foundation of minor churches by local groups. Ecclesiastical sites were found to be integral to kin-group identity and status, but the manner in which each group negotiated this, was very different. Finally the thesis examined material evidence for a change from diffused to concentrated power in the political organisation of Irish society, a process entwined with developments of the Viking Age. This centralisation of power and associated re-formation of identity was still often mediated through the ecclesiastical sphere but the thesis demonstrates diversity in the materialising of the mediation.

A cultural study on communication and technology with specific reference to media in China

This dissertation examines the role of communications technology in social change. It examines secondary data on contemporary China arguing that many interpretations of events in China are unsuitable at best and at worst conceptually damages our understanding of social change in China. This is especially the case in media studies under the ‘democratic framework’. It proposes that there is an alternative framework in studying the media and social change. This alternative conceptual framework is termed a zone of interpretative development offering a means by which to discuss events that take place in a mediated environment. Taking a theoretical foundation using the philosophy of Mikhail Bakhtin this dissertation develops a platform with which to understand communication technology from an anthropological perspective. Three media events from contemporary China are examined. The first examines the Democracy Wall event and the implications of using a public sphere framework. The second case examines the phenomenon of the Grass Mud Horse, a symbol that has gained popular purchase as a humorous expression of political dissatisfaction and develops the problems seen in the first case but with some solutions. Using a modification of Lev Vygotskiĭ’s zone of proximal development this symbol is understood as an expression of the collective recognition of a shared experience. In the second example from the popular TV talent show contests in China further expressions of collective experience are introduced. With the evidence from these media events in contemporary China this dissertation proposes that we can understand certain modes of communication as occurring in a zone of interpretative development. This proposed anthropological feature of social change via communication and technology can fruitfully describe meaning-formation in society via the expression and recognition of shared experiences.

Caring for the Celtic cubs: Discursive constructions of mothers and mothering in the Irish childcare debate

Drawing on an understanding of the public sphere as a multiplicity of communicative and discursive spaces this paper examines the constructions of mothers, mothering and motherhood which emerged in recent debates about childcare in Ireland. Preliminary analysis of these discursive constructions suggest that they are often based on rhetoric, informed by stereotypical assumptions and rooted in frames of reference which mitigate against the emergence of alternative ways of understanding the issues of mothering and childcare. It will be argued that the reductionist and divisive nature of the childcare debate which ensued prior to the 2005 budget, stymied childcare policy development at a time when its unprecedented prominence on the political agenda and the strength of public finances could have underpinned a shift in policy approach. The paper concludes with an exploration of the ways in which feminist scholarship can challenge the Irish model of childcare policy, which continues to be premised on an understanding of childcare and the reconciliation of work and family life as the privatised responsibility of individual women.

Formation and characterisation of ordered porous vanadium oxide inverse opal materials for Li-ion batteries

This thesis presents several routes towards achieving artificial opal templates by colloidal self-assembly of polystyrene (PS) or poly(methyl methacrylate) (PMMA) spheres and the use of these template for the fabrication of V2O5 inverse opals as cathode materials for lithium ion battery applications. First, through the manipulation of different experimental factors, several methods of affecting or directing opal growth towards realizing different structures, improving order and/or achieving faster formation on a variety of substrates are presented. The addition of the surfactant sodium dodecyl sulphate (SDS) at a concentration above the critical micelle concentration for SDS to a 5 wt% solution of PMMA spheres before dip-coating is presented as a method of achieving ordered 2D PhC monolayers on hydrophobic Au-coated silicon substrates at fast and slow rates of withdrawal. The effect that the degree of hydrophilicity of glass substrates has on the ordering of PMMA spheres is next investigated for a slow rate of withdrawal under noise agitation. Heating of the colloidal solution is also presented as a means of affecting order and thickness of opal deposits formed using fast rate dip coating. E-beam patterned substrates are shown as a means of altering the thermodynamically favoured FCC ordering of polystyrene spheres (PS) when dip coated at slow rate. Facile routes toward the synthesis of ordered V2O5 inverse opals are presented with direct infiltration of polymer sphere templates using liquid precursor. The use of different opal templates, both 2D and 3D partially ordered templates, is compared and the composition and arrangement of the subsequent IO structures post infiltration and calcination for various procedures is characterised. V2O5 IOs are also synthesised by electrodeposition from an aqueous VOSO4 solution at constant voltage. Electrochemical characterisation of these structures as cathode material for Li-ion batteries is assessed in a half cell arrangement for samples deposited on stainless steel foil substrates. Improved rate capabilities are demonstrated for these materials over bulk V2O5, with the improvement attributed to the shorter Li ion diffusion distances and increased electrolyte infiltration provided by the IO structure.

Water exchange rates of water-soluble manganese(III) porphyrins of therapeutical potential.

The activation parameters and the rate constants of the water-exchange reactions of Mn(III)TE-2-PyP(5+) (meso-tetrakis(N-ethylpyridinium-2-yl)porphyrin) as cationic, Mn(III)TnHex-2-PyP(5+) (meso-tetrakis(N-n-hexylpyridinium-2-yl)porphyrin) as sterically shielded cationic, and Mn(III)TSPP(3-) (meso-tetrakis(4-sulfonatophenyl)porphyrin) as anionic manganese(iii) porphyrins were determined from the temperature dependence of (17)O NMR relaxation rates. The rate constants at 298 K were obtained as 4.12 x 10(6) s(-1), 5.73 x 10(6) s(-1), and 2.74 x 10(7) s(-1), respectively. On the basis of the determined entropies of activation, an interchange-dissociative mechanism (I(d)) was proposed for the cationic complexes (DeltaS(double dagger) = approximately 0 J mol(-1) K(-1)) whereas a limiting dissociative mechanism (D) was proposed for Mn(III)TSPP(3-) complex (DeltaS(double dagger) = +79 J mol(-1) K(-1)). The obtained water exchange rate of Mn(III)TSPP(3-) corresponded well to the previously assumed value used by Koenig et al. (S. H. Koenig, R. D. Brown and M. Spiller, Magn. Reson. Med., 1987, 4, 52-260) to simulate the (1)H NMRD curves, therefore the measured value supports the theory developed for explaining the anomalous relaxivity of Mn(III)TSPP(3-) complex. A magnitude of the obtained water-exchange rate constants further confirms the suggested inner sphere electron transfer mechanism for the reactions of the two positively charged Mn(iii) porphyrins with the various biologically important oxygen and nitrogen reactive species. Due to the high biological and clinical relevance of the reactions that occur at the metal site of the studied Mn(iii) porphyrins, the determination of water exchange rates advanced our insight into their efficacy and mechanism of action, and in turn should impact their further development for both diagnostic (imaging) and therapeutic purposes.

On-board Robotic Multi-pinhole SPECT System for Region-of-interest (ROI) Imaging

On-board image guidance, such as cone-beam CT (CBCT) and kV/MV 2D imaging, is essential in many radiation therapy procedures, such as intensity modulated radiotherapy (IMRT) and stereotactic body radiation therapy (SBRT). These imaging techniques provide predominantly anatomical information for treatment planning and target localization. Recently, studies have shown that treatment planning based on functional and molecular information about the tumor and surrounding tissue could potentially improve the effectiveness of radiation therapy. However, current on-board imaging systems are limited in their functional and molecular imaging capability. Single Photon Emission Computed Tomography (SPECT) is a candidate to achieve on-board functional and molecular imaging. Traditional SPECT systems typically take 20 minutes or more for a scan, which is too long for on-board imaging. A robotic multi-pinhole SPECT system was proposed in this dissertation to provide shorter imaging time by using a robotic arm to maneuver the multi-pinhole SPECT system around the patient in position for radiation therapy.

A 49-pinhole collimated SPECT detector and its shielding were designed and simulated in this work using the computer-aided design (CAD) software. The trajectories of robotic arm about the patient, treatment table and gantry in the radiation therapy room and several detector assemblies such as parallel holes, single pinhole and 49 pinholes collimated detector were investigated. The rail mounted system was designed to enable a full range of detector positions and orientations to various crucial treatment sites including head and torso, while avoiding collision with linear accelerator (LINAC), patient table and patient.

An alignment method was developed in this work to calibrate the on-board robotic SPECT to the LINAC coordinate frame and to the coordinate frames of other on-board imaging systems such as CBCT. This alignment method utilizes line sources and one pinhole projection of these line sources. The model consists of multiple alignment parameters which maps line sources in 3-dimensional (3D) space to their 2-dimensional (2D) projections on the SPECT detector. Computer-simulation studies and experimental evaluations were performed as a function of number of line sources, Radon transform accuracy, finite line-source width, intrinsic camera resolution, Poisson noise and acquisition geometry. In computer-simulation studies, when there was no error in determining angles (α) and offsets (ρ) of the measured projections, the six alignment parameters (3 translational and 3 rotational) were estimated perfectly using three line sources. When angles (α) and offsets (ρ) were provided by Radon transform, the estimation accuracy was reduced. The estimation error was associated with rounding errors of Radon transform, finite line-source width, Poisson noise, number of line sources, intrinsic camera resolution and detector acquisition geometry. The estimation accuracy was significantly improved by using 4 line sources rather than 3 and also by using thinner line-source projections (obtained by better intrinsic detector resolution). With 5 line sources, median errors were 0.2 mm for the detector translations, 0.7 mm for the detector radius of rotation, and less than 0.5° for detector rotation, tilt and twist. In experimental evaluations, average errors relative to a different, independent registration technique were about 1.8 mm for detector translations, 1.1 mm for the detector radius of rotation (ROR), 0.5° and 0.4° for detector rotation and tilt, respectively, and 1.2° for detector twist.

Simulation studies were performed to investigate the improvement of imaging sensitivity and accuracy of hot sphere localization for breast imaging of patients in prone position. A 3D XCAT phantom was simulated in the prone position with nine hot spheres of 10 mm diameter added in the left breast. A no-treatment-table case and two commercial prone breast boards, 7 and 24 cm thick, were simulated. Different pinhole focal lengths were assessed for root-mean-square-error (RMSE). The pinhole focal lengths resulting in the lowest RMSE values were 12 cm, 18 cm and 21 cm for no table, thin board, and thick board, respectively. In both no table and thin board cases, all 9 hot spheres were easily visualized above background with 4-minute scans utilizing the 49-pinhole SPECT system while seven of nine hot spheres were visible with the thick board. In comparison with parallel-hole system, our 49-pinhole system shows reduction in noise and bias under these simulation cases. These results correspond to smaller radii of rotation for no-table case and thinner prone board. Similarly, localization accuracy with the 49-pinhole system was significantly better than with the parallel-hole system for both the thin and thick prone boards. Median localization errors for the 49-pinhole system with the thin board were less than 3 mm for 5 of 9 hot spheres, and less than 6 mm for the other 4 hot spheres. Median localization errors of 49-pinhole system with the thick board were less than 4 mm for 5 of 9 hot spheres, and less than 8 mm for the other 4 hot spheres.

Besides prone breast imaging, respiratory-gated region-of-interest (ROI) imaging of lung tumor was also investigated. A simulation study was conducted on the potential of multi-pinhole, region-of-interest (ROI) SPECT to alleviate noise effects associated with respiratory-gated SPECT imaging of the thorax. Two 4D XCAT digital phantoms were constructed, with either a 10 mm or 20 mm diameter tumor added in the right lung. The maximum diaphragm motion was 2 cm (for 10 mm tumor) or 4 cm (for 20 mm tumor) in superior-inferior direction and 1.2 cm in anterior-posterior direction. Projections were simulated with a 4-minute acquisition time (40 seconds per each of 6 gates) using either the ROI SPECT system (49-pinhole) or reference single and dual conventional broad cross-section, parallel-hole collimated SPECT. The SPECT images were reconstructed using OSEM with up to 6 iterations. Images were evaluated as a function of gate by profiles, noise versus bias curves, and a numerical observer performing a forced-choice localization task. Even for the 20 mm tumor, the 49-pinhole imaging ROI was found sufficient to encompass fully usual clinical ranges of diaphragm motion. Averaged over the 6 gates, noise at iteration 6 of 49-pinhole ROI imaging (10.9 µCi/ml) was approximately comparable to noise at iteration 2 of the two dual and single parallel-hole, broad cross-section systems (12.4 µCi/ml and 13.8 µCi/ml, respectively). Corresponding biases were much lower for the 49-pinhole ROI system (3.8 µCi/ml), versus 6.2 µCi/ml and 6.5 µCi/ml for the dual and single parallel-hole systems, respectively. Median localization errors averaged over 6 gates, for the 10 mm and 20 mm tumors respectively, were 1.6 mm and 0.5 mm using the ROI imaging system and 6.6 mm and 2.3 mm using the dual parallel-hole, broad cross-section system. The results demonstrate substantially improved imaging via ROI methods. One important application may be gated imaging of patients in position for radiation therapy.

A robotic SPECT imaging system was constructed utilizing a gamma camera detector (Digirad 2020tc) and a robot (KUKA KR150-L110 robot). An imaging study was performed with a phantom (PET CT PhantomTM), which includes 5 spheres of 10, 13, 17, 22 and 28 mm in diameter. The phantom was placed on a flat-top couch. SPECT projections were acquired with a parallel-hole collimator and a single-pinhole collimator both without background in the phantom, and with background at 1/10th the sphere activity concentration. The imaging trajectories of parallel-hole and pinhole collimated detectors spanned 180 degrees and 228 degrees respectively. The pinhole detector viewed a 14.7 cm-diameter common volume which encompassed the 28 mm and 22 mm spheres. The common volume for parallel-hole was a 20.8-cm-diameter cylinder which encompassed all five spheres in the phantom. The maneuverability of the robotic system was tested by navigating the detector to trace the flat-top table while avoiding collision with the table and maintaining the closest possible proximity to the common volume. For image reconstruction, detector trajectories were described by radius-of-rotation and detector rotation angle θ. These reconstruction parameters were obtained from the robot base and tool coordinates. The robotic SPECT system was able to maneuver the parallel-hole and pinhole collimated SPECT detectors in close proximity to the phantom, minimizing impact of the flat-top couch on detector to center-of-rotation (COR) distance. In no background case, all five spheres were visible in the reconstructed parallel-hole and pinhole images. In with background case, three spheres of 17, 22 and 28 mm diameter were readily observed with the parallel-hole imaging, and the targeted spheres (22 and 28 mm diameter) were readily observed in the pinhole ROI imaging.

In conclusion, the proposed on-board robotic SPECT can be aligned to LINAC/CBCT with a single pinhole projection of the line-source phantom. Alignment parameters can be estimated using one pinhole projection of line sources. This alignment method may be important for multi-pinhole SPECT, where relative pinhole alignment may vary during rotation. For single pinhole and multi-pinhole SPECT imaging onboard radiation therapy machines, the method could provide alignment of SPECT coordinates with those of CBCT and the LINAC. In simulation studies of prone breast imaging and respiratory-gated lung imaging, the 49-pinhole detector showed better tumor contrast recovery and localization in a 4-minute scan compared to parallel-hole detector. On-board SPECT could be achieved by a robot maneuvering a SPECT detector about patients in position for radiation therapy on a flat-top couch. The robot inherent coordinate frames could be an effective means to estimate detector pose for use in SPECT image reconstruction.

MUSICAL EXOTICISM EXPLORED IN PIANO WORKS FROM THE EIGHTEENTH CENTURY THROUGH THE EARLY TWENTIETH CENTURY

Musical exoticism is the evocation of a culture different from that of the composer. It occurs anytime a composer tries to conjure up the music of a country not his own. Although there have been studies of exoticism in the piano works of an individual composer, namely Debussy, there has not been a comprehensive study of musical exoticism in the piano literature as a whole. Upon chronological examination of the piano repertoire, general trends exhibiting exoticism become evident. The first general trend is the emergence of the Turkish style (alia turca) in the eighteenth century. Turkish style soon transmuted to the Hungarian-Gypsy style (all 'ongarese or style hongrois). [In Beethoven's Op. 129, it is alia ingharese.] Composers often alternated between the two styles even in the same composition. By the late nineteenth century, style hongrois was firmly entrenched in the musical language of Austro-German composers, as seen in the works of Brahms. In the nineteenth century, composers turned to the Middle East, North Africa and Spain for inspiration. In particular are several compositions emulating Spanish dance music, culminating in the Spanish works of Debussy and Ravel. The gamelans from Indonesia and objects from the Far East of Japan and China, brought by advances in trade and transportation, captivated the imagination of composers at the turn of the twentieth century. Also in the early twentieth century, composers tried emulating dance and jazz music coming from the Americas, such as the cakewalk, minstrelsy, and the blues. One sees the ever widening sphere of exotic inspiration for western music composers: from the Turkish invasions to the traveling Gypsies of Hungary; to the captivating dance rhythms, soulful cante jondo sections, and guitar flourishes of Spain; expanding further to the far reaches of Asia and the jazzy rhythms of the Americas. This performance dissertation consists of three recitals presented at the University of Maryland, and is documented on compact disc recordings which are housed within the University of Maryland Library System. The recordings present the music of Balakirev, Beethoven, Brahms, Chopin, Debussy, Haydn, Hummel, Milhaud, Moszkowski, Mozart, Ravel, and Schubert.

Tracing Neoclassical Influences in selected solo and chamber music for the clarinet

The musical period of Neoclassicism began in the 1920's, between the first and second world wars. It was initiated by French composers and eventually spread to other countries. One of the most important themes to emerge from the movement was to escape from the formless, rather emotional music of the Romantic era and instead, emphasize balance, order, objectivity and clarity in musical form. Many popular clarinet repertoires are enjoyed by performers and listeners because the music is enjoyable to play and easy to listen to. In particular, classically influenced clarinet music is quite interesting because it features musical elements from both the past and contemporary musical styles. For instance, some composers have integrated preexisting, more traditional styles of composition with lighter styles of modern culture such as popular music and Jazz. It is difficult to discover purely neoclassical clarinet repertoires even though many composers created their pieces during the neoclassical era. What we most commonly find are both neoclassical and non-neoclassical influences in compositions from that time period. Thus, I aim to trace the influence of neoclassicism in selected clarinet repertoires that exist today. It is my hope that increased awareness and knowledge about accessible clarinet music may encourage the general public to develop a deeper interest in a wider sphere of clarinet music, beyond what is considered popular today. The works performed and discussed in this dissertation are the following: (Recital I) Duo Concertante by Darius Milhaud; Sonata by Leonard Bernstein; Sonata for Two Clarinets by Francis Poulenc; Duos for Flute and Clarinet, Op. 34 by Robert Muczynski; Dance Preludes by Witold Lutoslawski, (Recital II) Sonatine by Arthur Honegger; Time pieces by Robert Muczynski; Suite for Clarinet, Violin and Piano by Darius Milhaud; Sonate for Clarinet, Flute and Piano by Maurice Emmanuel; Tarantelle for Flute, Clarinet and Piano, Op. 6 by Camille Saint-Saëns, (Recital III) Sonatina by Joseph Horovitz; Suite from L'histoire du Soldat for Clarinet, Violin and Piano by Igor Stravinsky; Contrasts for Clarinet, Violin and Piano by Béla Bartók The recitals that took place on December 1, 2012 and on April 25, 2013 were performed in the Ulrich Recital Hall of the Clarice Performing Arts Center in College Park, Maryland. The recital that took place on November 2, 2013 was performed at the Gildenhorn Recital Hall of the same performing arts center.

Consistent deformations of [p,p]-type gauge field theories

Using BRST-cohomological techniques, we analyze the consistent deformations of theories describing free tensor gauge fields whose symmetries are represented by Young tableaux made of two columns of equal length p, p > 1. Under the assumptions of locality and Poincaré invariance, we find that there is no consistent deformation of these theories that non-trivially modifies the gauge algebra and/or the gauge transformations. Adding the requirement that the deformation contains no more than two derivatives, the only possible deformation is a cosmological-constant-like term. © SISSA/ISAS 2004.

No self-interaction for two-column massless fields

We investigate the problem of introducing consistent self-couplings in free theories for mixed tensor gauge fields whose symmetry properties are characterized by Young diagrams made of two columns of arbitrary (but different) lengths. We prove that, in flat space, these theories admit no local, Poincaré-invariant, smooth, selfinteracting deformation with at most two derivatives in the Lagrangian. Relaxing the derivative and Lorentz-invariance assumptions, there still is no deformation that modifies the gauge algebra, and in most cases no deformation that alters the gauge transformations. Our approach is based on a Becchi-Rouet-Stora-iyutin (BRST) -cohomology deformation procedure. © 2005 American Institute of Physics.

Spin three gauge theory revisited

We study the problem of consistent interactions for spin-3 gauge fields in flat spacetime of arbitrary dimension 3$">n>3. Under the sole assumptions of Poincaré and parity invariance, local and perturbative deformation of the free theory, we determine all nontrivial consistent deformations of the abelian gauge algebra and classify the corresponding deformations of the quadratic action, at first order in the deformation parameter. We prove that all such vertices are cubic, contain a total of either three or five derivatives and are uniquely characterized by a rank-three constant tensor (an internal algebra structure constant). The covariant cubic vertex containing three derivatives is the vertex discovered by Berends, Burgers and van Dam, which however leads to inconsistencies at second order in the deformation parameter. In dimensions 4$">n>4 and for a completely antisymmetric structure constant tensor, another covariant cubic vertex exists, which contains five derivatives and passes the consistency test where the previous vertex failed. © SISSA 2006.

Parity-violating vertices for spin-3 gauge fields

The problem of constructing consistent parity-violating interactions for spin-3 gauge fields is considered in Minkowski space. Under the assumptions of locality, Poincaré invariance, and parity noninvariance, we classify all the nontrivial perturbative deformations of the Abelian gauge algebra. In space-time dimensions n=3 and n=5, deformations of the free theory are obtained which make the gauge algebra non-Abelian and give rise to nontrivial cubic vertices in the Lagrangian, at first order in the deformation parameter g. At second order in g, consistency conditions are obtained which the five-dimensional vertex obeys, but which rule out the n=3 candidate. Moreover, in the five-dimensional first-order deformation case, the gauge transformations are modified by a new term which involves the second de Wit-Freedman connection in a simple and suggestive way. © 2006 The American Physical Society.

Geometrías no euclídeas: un acercamiento con tecnología digital

En este curso corto utilizamos distintas aplicaciones de geometría dinámica para realizar construcciones geométricas en el modelo de Poincaré para geometría hiperbólica con el propósito de investigar y determinar la naturaleza de algunos teoremas de geometría para la enseñanza secundaria y superior. De esta forma clasificamos algunos de los teoremas de geometría plana como neutrales, estrictamente euclidianas o estrictamente hiperbólicos.

Phase-accuracy comparisons and improved far-field estimates for 3-D edge elements on tetrahedral meshes

Edge-element methods have proved very effective for 3-D electromagnetic computations and are widely used on unstructured meshes. However, the accuracy of standard edge elements can be criticised because of their low order. This paper analyses discrete dispersion relations together with numerical propagation accuracy to determine the effect of tetrahedral shape on the phase accuracy of standard 3-D edgeelement approximations in comparison to other methods. Scattering computations for the sphere obtained with edge elements are compared with results obtained with vertex elements, and a new formulation of the far-field integral approximations for use with edge elements is shown to give improved cross sections over conventional formulations.