Montaigne, Lying and Early Modern Self-Fashioning: A Discursive Dialogue with Lope's El perro del hortelano on the Page and on Stage

A shared code of connection arguably exists between two plays by Lope de VegaEl mayordomo de la duquesa de Amalfi and El perro del hortelanoand the work of Michel de Montaigne. Nevertheless, one cannot but ask: how it can be that in two works produced so close in time, the same situation is resolved so differently? Montaigne can be said to provide an answer in his Essays, explaining that a similar situation can produce wholly different results: how in the first, one is saved', and in the second, one is destroyed. One might imagine, too, that Belflor's countess and her ennobled secretary, who together sustain a lie in a society that lived by the lie, would have been likewise consoled' by a set of interlocking tropes and similitudes' in the words of Stephen Greenblatt, which linked two contemporary and complementary fashioners of human nature, Lope and Montaigne, in a discursive dialogue on how otherwise honest women and men were subject to the vice of lying in their process of self-fashioning, as well as potentially enslaved' by it.

Molybdenum isotope fractionation in pelagic euxinia: Evidence from the modern Black and Baltic Seas

Here we present stable isotope data for vertical profiles of dissolved molybdenum of the modern euxinic water columns of the Black Sea and two deeps of the Baltic Sea. Dissolved molybdenum in all water samples is depleted in salinity-normalized concentration and enriched in the heavy isotope (δ98Mo values up to + 2.9‰) compared to previously published isotope data of sedimentary molybdenum from the same range of water depths. Furthermore, δ98Mo values of all water samples from the Black Sea and anoxic deeps of the Baltic Sea are heavier than open ocean water. The observed isotope fractionation between sediments and the anoxic water column of the Black Sea are in line with the model of thiomolybdates that scavenge to particles under reducing conditions. An extrapolation to a theoretical pure MoS42− solution indicates a fractionation constant between MoS42− and authigenic solid Mo of 0.5 ± 0.3‰. Measured waters with all thiomolybdates coexisting in various proportions show larger but non-linear fractionation. The best explanation for our field observations is Mo scavenging by the thiomolybdates, dominantly — but not exclusively — present in the form of MoS42−. The Mo isotopic compositions of samples from the sediments and anoxic water column of the Baltic Sea are in overall agreement with those of the Black Sea at intermediate depth and corresponding sulphide concentrations. The more dynamic changes of redox conditions in the Baltic deeps complicate the Black Sea-derived relationship between thiomolybdates and Mo isotopic composition. In particular, the occasional flushing/mixing, of the deep waters, affects the corresponding water column and sedimentary data. δ98Mo values of the upper oxic waters of both basins are higher than predicted by mixing models based on salinity variations. The results can be explained by non-conservative behaviour of Mo under suboxic to anoxic conditions in the shallow bottom parts of the basin, most pronounced on the NW shelf of the Black Sea.

Testing the TICT State Hypothesis: an Investigation into the Solvatochromic Behavior of 2-Naphthalenylmethylene Malononitrile

Towards the goal of investigating the possible Twisted Intramolecular Charge Transfer (TICT) state mechanism of fluorescence emission, two aromatic dicyanovinyl compounds, 2-(naphthalene-2-ylmethylene) malononitrile (DCN) and a rigidified analogue, 3,4-dihydrophenanthren-1(2H)-ylidene)malononitrile (RDCN) were synthesized and their absorption and steady-state fluorescence emission spectra characterized. The spectral characterization was divided into two studies: first, DCN and RDCN were characterized in liquid solvents of increasing polarity; second, DCN and RDCN were characterized in viscous solvents and rigid glass media. The absorption spectra for both DCN and RDCN in all solvents demonstrated little to no solvatochromism. Emission results for DCN and RDCN in liquid solvents of increasing polarity showed DCN possessing strong solvatochromism while RDCN showed much less solvatochromism. Using the Lippert-Mataga equation, the difference between the ground and excited state dipole moment for DCN was estimated to be 8.4 + 0.4 Debye and between ~3.0 to 5.0 Debye for RDCN. Quantum yield measurements for DCN and RDCN in hexane, diethyl ether and acetonitrile were less than 0.01 and independent of polarity for both both solvents, with DCN generally possessing a quantum yield 3-4 times greater than RDCN. Experiments in glass media for DCN and RDCN showed a lessening of their solvatochromic character in both polar and non-polar glasses. These data provide strong evidence for a link between molecular flexibility and solvatochromism. However, while these data are consistent with a TICT state hypothesis for the emission mechanism, an alternative mechanism proposed by Maroncelli et al.10 involving rotation about the dicyanovinyl double bond in the excited state remains a possibility as well.

The Crystallization Kinetics of Polylactic Acid (Pla) Processed Through Solid-State/Melt Extrusion

Polylactic acid (PLA) is a bio-derived, biodegradable polymer with a number of similar mechanical properties to commodity plastics like polyethylene (PE) and polyethylene terephthalate (PETE). There has recently been a great interest in using PLA to replace these typical petroleum-derived polymers because of the developing trend to use more sustainable materials and technologies. However, PLA¿s inherent slow crystallization behavior is not compatible with prototypical polymer processing techniques such as molding and extrusion, and in turn inhibits its widespread use in industrial applications. In order to make PLA into a commercially-viable material, there is a need to process the material in such a way that its tendency to form crystals is enhanced. The industry standard for producing PLA products is via twin screw extrusion (TSE), where polymer pellets are fed into a heated extruder, mixed at a temperature above its melting temperature, and molded into a desired shape. A relatively novel processing technique called solid-state shear pulverization (SSSP) processes the polymer in the solid state so that nucleation sites can develop and fast crystallization can occur. SSSP has also been found to enhance the mechanical properties of a material, but its powder output form is undesirable in industry. A new process called solid-state/melt extrusion (SSME), developed at Bucknell University, combines the TSE and SSSP processes in one instrument. This technique has proven to produce moldable polymer products with increased mechanical strength. This thesis first investigated the effects of the TSE, SSSP, and SSME polymer processing techniques on PLA. The study seeks to determine the process that yields products with the most enhanced thermal and mechanical properties. For characterization, percent crystallinity, crystallization half time, storage modulus, softening temperature, degradation temperature and molecular weight were analyzed for all samples. Through these characterization techniques, it was observed that SSME-processed PLA had enhanced properties relative to TSE- and SSSP-processed PLA. Because of the previous findings, an optimization study for SSME-processed PLA was conducted where throughput and screw design were varied. The optimization study determined PLA processed with a low flow rate and a moderate screw design in an SSME process produced a polymer product with the largest increase in thermal properties and a high retention of polymer structure relative to TSE-, SSSP-, and all other SSME-processed PLA. It was concluded that the SSSP part of processing scissions polymer chains, creating defects within the material, while the TSE part of processing allows these defects to be mixed thoroughly throughout the sample. The study showed that a proper SSME setup allows for both the increase in nucleation sites within the polymer and sufficient mixing, which in turn leads to the development of a large amount of crystals in a short period of time.

The Modern Urban Cartography of Present-day Bratislava.

Following an extensive survey of sources on urban development and comparative analyses of Bratislava and other major Central European cities and Slovak regional centres, Divinsky completed a detailed study of Bratislava's spatial structure using the most recent approaches of the so-called Belgian school. He also produced an intraurban regionalisation of Bratislava as a multi-structural interactive model, mapped and characterised by the cardinal parameters, processes, trends and inequalities of population and housing in each spatial element of the model. The field survey entailed a seven-month physical investigation of the territory using a "street by street, block by block, house by house and locality by locality" system to ensure that no areas were missed. A second field survey was carried out two years later to check on transformations. An important feature of the research was the concept of the morphological city, which was defined as "a continuously built-up area of all urban functions (i.e. excluding agricultural lands and forests lying outside the city which serve for half-day recreation) made up of spatial-structural units fulfilling certain criteria". The most important criteria was a minimum population density per unit of no less than 650 persons per square kilometre, except in the case of units totally surrounded by units of higher densities, where it could be lower. The morphological city as defined here includes only 36% of the territory of the administrative city, but 95% of the popula tion, giving a much higher population density which better reflects the urban reality of Bratislava.

The Legal Protection of Fundamental Human Values in Central and Eastern Europe and Modern Biotechnology: Towards European Harmonization

The protection of the fundamental human values (life, bodily integrity, human dignity, privacy) becomes imperative with the rapid progress in modern biotechnology, which can result in major alterations in the genetic make-up of organisms. It has become possible to insert human genes into pigs so that their internal organs coated in human proteins are more suitable for transplantation into humans (xenotransplantation), and micro-organisms that cam make insulin have been created, thus changing the genetic make-up of humans. At the end of the 1980s, the Central and Eastern European (CEE) countries either initiated new legislation or started to amend existing laws in this area (clinical testing of drugs, experiments on man, prenatal genetic diagnosis, legal protection of the embryo/foetus, etc.). The analysis here indicates that the CEE countries have not sufficiently adjusted their regulations to the findings of modern biotechnology, either because of the relatively short period they have had to do so, or because there are no definite answers to the questions which modern biotechnology has raised (ethical aspects of xenotransplantation, or of the use of live-aborted embryonic or foetal tissue in neuro-transplantation, etc.). In order to harmonise the existing regulations in CEE countries with respect to the EU and supranational contexts, two critical issues should be taken into consideration. The first is the necessity for CEE countries to recognise the place of humans within the achievements of modern biotechnology (a broader affirmation of the principle of autonomy, an explicit ban on the violation of the genetic identity of either born or unborn life, etc.). The second concerns the definition of the status of different biotechnological procedures and their permissibility (gene therapy, therapeutic genomes, xenotransplantation, etc.). The road towards such answers may be more easily identified once all CEE countries become members of the Council of Europe and express their wish to join the EU, which in turn presupposes taking over the entire body of EU legislation.

Synchronous Description of the Grammatical Structure of Modern Romani and Elaboration of Romani Textbook

The first outcome of this project was a synchronous description of the most widely spoken Romani dialect in the Czech and Slovak Republics, aimed at teachers and lecturers of the Romani language. This is intended to serve as a methodological guide for the demonstration of various grammatical phenomena, but may also assist people who want a basic knowledge of the linguistic structure of this neo-Indian language. The grammatical material is divided into 23 chapters, in a sequence which may be followed in teaching or studying. The book includes examples of the grammatical elements, but not exercises or articles. The second work produced was a textbook of Slovak Romani, which is the most detailed in the Czech or Slovak Republics to date. It is aimed at all those interested in active use of the Romani language: high school and university students, people working with the Roma, and Roma who speak little or nothing of the language of their forebears, The book includes 34 lessons, each containing relevant Romani tests (articles and dialogues), a short vocabulary list, grammatical explanations, exercises and examples of Romani written or oral expression. The textbook also contains a considerable amount of ethno-cultural information and notes on the life and traditions of the Roman, as well as pointing out some differences between different dialects. A brief Romani-Czech phrase book is included as an appendix.