Tailoring magnetic field gradient design to magnet cryostat geometry

Eddy currents induced within a magnetic resonance imaging (MRI) cryostat bore during pulsing of gradient coils can be applied constructively together with the gradient currents that generate them, to obtain good quality gradient uniformities within a specified imaging volume over time. This can be achieved by simultaneously optimizing the spatial distribution and temporal pre-emphasis of the gradient coil current, to account for the spatial and temporal variation of the secondary magnetic fields due to the induced eddy currents. This method allows the tailored design of gradient coil/magnet configurations and consequent engineering trade-offs. To compute the transient eddy currents within a realistic cryostat vessel, a low-frequency finite-difference time-domain (FDTD) method using total-field scattered-field (TFSF) scheme has been performed and validated

Solitons: permanent waves

Communications engineers are learning to create an electromagnet wave at will, to transmit information. This wave, the optical soliton, is the subject of astounding recent developments in nonlinear optics and lasers. The author describes the principles behind the use of solitons in optical communications and shows that in the context of such communications the most important property of solitons is that they are extremely stable. Not only do they not disperse, but an encounter with a perturbation (e.g. a joint in optical fibre) will usually leave the soliton unaltered.

Magnetic drive system for a new centrifugal rotary blood pump

The purpose of this investigation was to design a novel magnetic drive and bearing system for a new centrifugal rotary blood pump (CRBP). The drive system consists of two components: (i) permanent magnets within the impeller of the CRBP; and (ii) the driving electromagnets. Orientation of the magnets varies from axial through to 60° included out-lean (conical configuration). Permanent magnets replace the electromagnet drive to allow easier characterization. The performance characteristics tested were the axial force of attraction between the stator and rotor at angles of rotational alignment, Ø, and the corresponding torque at those angles. The drive components were tested for various magnetic cone angles, ?. The test was repeated for three backing conditions: (i) non-backed; (ii) steel-cupped; and (iii) steel plate back-iron, performed on an Instron tensile testing machine. Experimental results were expanded upon through finite element and boundary element analysis (BEM). The force/torque characteristics were maximal for a 12-magnet configuration at 0° cone angle with steel-back iron (axial force = 60 N, torque = 0.375 Nm). BEM showed how introducing a cone angle increases the radial restoring force threefold while not compromising axial bearing force. Magnets in the drive system may be orientated not only to provide adequate coupling to drive the CRBP, but to provide significant axial and radial bearing forces capable of withstanding over 100 m/s2 shock excitation on the impeller. Although the 12 magnet 0° (?) configuration yielded the greatest force/torque characteristic, this was seen as potentially unattractive as this magnetic cone angle yielded poor radial restoring force characteristics.

Design and construction of an ultrasonic probe for use in a Cryo-Magnet NMR Spectrometer

SINNMR (Sonically Induced Narrowing of the Nuclear Magnetic Resonance spectra of solids), is a novel technique that is being developed to enable the routine study of solids by nuclear magnetic resonance spectroscopy. SINNMR aims to narrow the broad resonances that are characteristic of solid state NMR by inducing rapid incoherent motion of solid particles suspended in a support medium, using high frequency ultrasound in the range 2-10 MHz. The width of the normal broad resonances from solids are due to incomplete averaging of several components of the total spin Hamiltonian caused by restrictions placed on molecular motion within a solid. At present Magic Angle Spinning (MAS) NMR is the classical solid state technique used to reduce line broadening, but: this has associated problems, not least of which is the appearance of many spinning side bands which confuse the spectra. It is hoped that SlNNMR will offer a simple alternative, particularly as it does not reveal spinning sidebands The fundamental question concerning whether the use of ultrasound within a cryo-magnet will cause quenching has been investigated with success, as even under the most extreme conditions of power, frequency and irradiator time, the magnet does not quench. The objective of this work is to design and construct a SINNMR probe for use in a super conducting cryo-magnet NMR spectrometer. A cell for such a probe has been constructed and incorporated into an adapted high resolution broadband probe. It has been proved that the cell is capable of causing cavitation, up to 10 MHz, by running a series of ultrasonic reactions within it and observing the reaction products. It was found that the ultrasound was causing the sample to be heated to unacceptable temperatures and this necessitated the incorporation of temperature stabilisation devices. Work has been performed on the investigation of the narrowing of the solid state 23Na spectrum of tri-sodium phosphate using high frequency ultrasound. Work has also been completed on the signal enhancement and T1 reduction of a liquid mixture and a pure compound using ultrasound. Some preliminary "bench" experiments have been completed on a novel ultrasonic device designed to help minimise sample heating. The concept involves passing the ultrasound through a temperature stabilised, liquid filled funnel that has a drum skin on the end that will enable the passage of ultrasound into the sample. Bench experiments have proved that acoustic attenuation is low and that cavitation in the liquid beyond the device is still possible.

Disentangle contextual and permanent individual motivations:an application to shopping behavior

Past studies resulted in conflicting definitions of consumer motivation. On the one hand, motivations are seen as the consumer’s characteristics that shape her general behavior (motivational trait). On the other hand, they are seen as contextual variables representing the reason why the individual is behaving specific to today’s context (motivational state). The objective of this research is to stress the difference between these two concepts and to understand the impact of each on consumer behavior. We applied our empirical study to shopping motivations; our results show a strong interaction between motivational trait and motivational state. Problem and Hypothesis On the one hand, Westbrook and Black (1985) consider shopping motivations as individual permanent characteristics. This concept is shared by other researchers (Rohm and Swaminathan 2004), which show that some shoppers are functional (they shop for convenience, information seeking, and time saving) while some others are hedonic (they shop for social interaction, bargain hunting and browsing). On the other hand, Kaltcheva and Weitz (2006) define motivations as a contextual orientation changing over time, depending on the situation, and show that contextual shopping motivations have a strong impact on shopping behavior. From our knowledge, no research specifically examined the respective impact of both these shopping motivation types. To deal with this issue, we used the notions of “traits” and “states” that have been largely used in marketing research to designate respectively a permanent characteristic of the individual and a temporary orientation of the consumer (Mowen 2000). The reversal theory (Apter 2001) suggests that two opposite states exist: the telic and the paratelic states. In the telic state, individuals set goals for themselves, must be disciplined to reach these goals, and do not behave in accordance with their personal trait. In the paratelic state, individuals are seeking arousal and enjoyment, do not set rules, and one could postulate that they act in accordance with their natural tendencies. Based on these considerations, we hypothesize the following process: in situations involving paratelic states, hedonic as well as functional individuals should behave according to their natural traits, whereas in situations involving telic states, hedonic people should inhibit their natural propensity to enjoy shopping and behave similarly to functional people. Hence, we postulate the following: Hypothesis: Compared to shoppers with functional motivational trait, shoppers with hedonic motivational trait will a) significantly display more hedonic shopping behavior intentions in a condition of paratelic motivational state, and b) not display more hedonic shopping behavior intentions in a condition a telic motivational state Empirical Research First, 108 participants were asked to fill a multi-items scale about their shopping habits, which actually measured their shopping motivational traits. This questionnaire allowed us to highlight four different dimensions in shopping motivational traits: social interaction, novelty/utility seeking, bargain hunting, and browsing. According to their scores on different items, participants were classified as functional or as hedonic on each of these four dimensions (a single individual may be hedonic on some dimensions and functional on others). Then, participants were then induced to adopt either a telic or a paratelic shopping motivational state while reading an appropriate scenario. Finally, participants were asked for their shopping behavior intentions in response to the shopping context. Four items were developed, corresponding to the four shopping motivational trait dimensions we found with our factor analysis. Results As we found four dimensions in shopping motivational trait, we set up four quasi-experimental designs to capture the entire phenomenon: for each dimension, a 2 (motivational trait) x 2 (motivational state) design was built, where the dependant variable was the shopping behavior element corresponding to the studied dimension. Four 2 x 2 Anovas were performed to assess the interaction between motivational trait and motivational state. Concerning the three dimensions - browsing, novelty/utility seeking, and bargain hunting- , in the paratelic state scenario participants with hedonic motivational trait displayed significantly more hedonic shopping behavior intentions than participants with a functional motivational trait (resp. F = 9.701, p = .003; F = 4.979, p = .03; F = 5.757, p = .02); and in the telic state scenario, there was no significant difference in behavior intentions between participants with hedonic or functional motivation trait. Each time, the interaction effect between motivational state and motivational trait was significant (resp. F = 4.859, p = .03; F = 3.314, p = .07; F = 2.98, p = .08). Concerning the fourth dimension, social interaction, shopping behavior intentions of participants with hedonic and with functional motivational traits were significantly different in the paratelic state scenario (F = 29.898, p <.000) as well as in the telic state scenario (F = 9.559, p = .003). However, the interaction effect showed that this behavioral difference was significantly stronger in the paratelic scenario. All these results support our research hypothesis. Discussion and Implications Our study provides consistent support for our hypotheses saying that there is an interaction effect between shopping motivational states and shopping motivational traits. The generalization of the results is strengthened by the study of four different shopping traits: social interaction, novelty/utility seeking, bargain hunting and browsing. As we proposed, when shopping in a goal-oriented state (telic state), behaviors of hedonic and functional shoppers do not differ significantly. Conversely, when shopping for a recreational reason (paratelic state), hedonic and functional shoppers behave significantly different. These results could explain why some previous studies concluded that shopping motivational traits had no impact on shopping behavior: they did not take into consideration the interaction between motivational trait and motivational state. Moreover, our study shows that marketing surveys performed by store managers to draw the personal profile of their customers must be crossed with contextual motivations in order to accurately forecast shopper behavior. Future Developments Our results can be explained by the self-control process, which pushes hedonic-trait shoppers to behave in a rather functional way in utilitarian situations. However, to be certain that this is the very process that occurs, we plan to add self-control perception scales to our existing measures. This is obviously the next step of this research.

Disentangle contextual and permanent individual motivations:an application to shopping behavior

Past studies resulted in conflicting definitions of consumer motivation. Motivations are seen either as the consumer? s characteristics that shape her general behavior (motivational trait), or as contextual variables representing the reason why the individual is behaving specific to today?s context (motivational state). The objective of this research is to understand the impact of each on consumer behavior. Applied to shopping motivations, our study shows a strong interaction between motivational trait and state: motivational traits influence behavior only when associated with a recreational motivational state. In a functional motivational state, individuals prevent their personal characteristics from being fully expressed.

Ethics and social responsibility - do HR professionals have the ‘courage to challenge’ or are they set to be permanent ‘bystanders'?

This paper considers the role of HR in ethics and social responsibility and questions why, despite an acceptance of a role in ethical stewardship, the HR profession appears to be reluctant to embrace its responsibilities in this area. The study explores how HR professionals see their role in relation to ethical stewardship of the organisation, and the factors that inhibit its execution. A survey of 113 UK-based HR professionals, working in both domestic and multinational corporations, was conducted to explore their perceptions of the role of HR in maintaining ethical and socially responsible action in their organisations, and to identify features of the organisational environment which might help or hinder this role being effectively carried out. The findings indicate that although there is a clear understanding of the expectations of ethical stewardship, HR professionals often face difficulties in fulfilling this role because of competing tensions and perceptions of their role within their organisations. A way forward is proposed, which draws on the positive individual factors highlighted in this research to explore how approaches to organisational development (through positive deviance) may reduce these tensions to enable the better fulfilment of ethical responsibilities within organisations. The involvement and active modelling of ethical behaviour by senior management, coupled with an open approach to surfacing organisational values and building HR procedures, which support socially responsible action, are crucial to achieving socially responsible organisations. Finally, this paper challenges the HR profession, through professional and academic institutions internationally, to embrace their role in achieving this. © 2013 Taylor & Francis.

Solitons: permanent waves

Communications engineers are learning to create an electromagnet wave at will, to transmit information. This wave, the optical soliton, is the subject of astounding recent developments in nonlinear optics and lasers. The author describes the principles behind the use of solitons in optical communications and shows that in the context of such communications the most important property of solitons is that they are extremely stable. Not only do they not disperse, but an encounter with a perturbation (e.g. a joint in optical fibre) will usually leave the soliton unaltered.

Analysis of single and multiple, non-permanent, tunable, birefringent spectral holes in a fibre-Bragg grating stop-band produced via uniaxial pressure

We present an experimental and numerical study of transversely loaded uniform fibre-Bragg gratings. A novel loading configuration is described, producing pressure-induced spectral holes in an initially strong uniform grating. The birefringence properties of these gratings are analysed. It is shown that the frequency splitting of the two spectral holes, corresponding to two orthogonal polarisation states, can be adjusted precisely using this loading configuration. We finally demonstrate a new and simple scheme to induce multiple spectral holes in the stop-band. © 2003 Elsevier Science B.V. All rights reserved.

Characterizing permanent deformation and fracture of asphalt mixtures by using compressive dynamic modulus tests

Permanent deformation and fracture may develop simultaneously when an asphalt mixture is subjected to a compressive load. The objective of this research is to separate viscoplasticity and viscofracture from viscoelasticity so that the permanent deformation and fracture of the asphalt mixtures can be individually and accurately characterized without the influence of viscoelasticity. The undamaged properties of 16 asphalt mixtures that have two binder types, two air void contents, and two aging conditions are first obtained by conducting nondestructive creep tests and nondestructive dynamic modulus tests. Testing results are analyzed by using the linear viscoelastic theory in which the creep compliance and the relaxation modulus are modeled by the Prony model. The dynamic modulus and phase angle of the undamaged asphalt mixtures remained constant with the load cycles. The undamaged asphalt mixtures are then used to perform the destructive dynamic modulus tests in which the dynamic modulus and phase angle of the damaged asphalt mixtures vary with load cycles. This indicates plastic evolution and crack propagation. The growth of cracks is signaled principally by the increase of the phase angle, which occurs only in the tertiary stage. The measured total strain is successfully decomposed into elastic strain, viscoelastic strain, plastic strain, viscoplastic strain, and viscofracture strain by employing the pseudostrain concept and the extended elastic-viscoelastic correspondence principle. The separated viscoplastic strain uses a predictive model to characterize the permanent deformation. The separated viscofracture strain uses a fracture strain model to characterize the fracture of the asphalt mixtures in which the flow number is determined and a crack speed index is proposed. Comparisons of the 16 samples show that aged asphalt mixtures with a low air void content have a better performance, resisting permanent deformation and fracture. © 2012 American Society of Civil Engineers.

Antisymmetric distribution of permanent refractive index change in β-BaB2O4 crystal under exposure of femtosecond pulses

We have observed unusual asymmetrical refractive index change as a result of femtosecond laser inscription in a crystal without center of inversion. Profile of the refractive index change exhibits sign turn within the domain of femtosecond pulse exposure. © Owned by the authors, published by EDP Sciences, 2013.