BS-SEM evaluation of the tisular interactions between cortical bone and calcium-phosphate covered titanium implants

The improvement of the reliability of the contact between the osseous tissues and the implant materials has been tested by recovering the metallic implants with ceramic materials, usually calcium phosphates. In our study, the calcium phosphate recovering layers were deposited by means of a pulsed-laser deposition technique. Our aim was to to evaluate the tissue interactions established between cortical bone and titanium implants covered by five different layers, ranging from amorphous calcium phosphate to crystalline hydroxyapatite, obtained by altering the parameters of the laser ablation process. The surgical protocol of the study consisted in the simultaneous implantation of the five types of implants in both the tibial dyaphisis of three Beagle dogs, sacrificed respectively one, two and three months after the last surgical procedures. After the sacrifice, the samples were submitted to a scheduled procedure of embedding in plastic polymers without prior decalcification, in order to perform the ultrastructural studies: scanning microscopy with secondary and backscattered electrons (BS-SEM). Our observations show that both in terms of the calcified tissues appearing as a response to the presence of the different coatings and of time of recovering, the implants coated with crystalline calcium phosphate layers by laser ablation present a better result than the amorphous-calcium-phosphate-coated implants. Moreover, the constant presence of chondroid tissue, related with the mechanical induction by forces applied on the recovering area, strongly suggests that the mechanisms implied in osteointegration are related to endomembranous, rather than endochondral ossification processes

BS-SEM evaluation of the tisular interactions between cortical bone and calcium-phosphate covered titanium implants

The improvement of the reliability of the contact between the osseous tissues and the implant materials has been tested by recovering the metallic implants with ceramic materials, usually calcium phosphates. In our study, the calcium phosphate recovering layers were deposited by means of a pulsed-laser deposition technique. Our aim was to to evaluate the tissue interactions established between cortical bone and titanium implants covered by five different layers, ranging from amorphous calcium phosphate to crystalline hydroxyapatite, obtained by altering the parameters of the laser ablation process. The surgical protocol of the study consisted in the simultaneous implantation of the five types of implants in both the tibial dyaphisis of three Beagle dogs, sacrificed respectively one, two and three months after the last surgical procedures. After the sacrifice, the samples were submitted to a scheduled procedure of embedding in plastic polymers without prior decalcification, in order to perform the ultrastructural studies: scanning microscopy with secondary and backscattered electrons (BS-SEM). Our observations show that both in terms of the calcified tissues appearing as a response to the presence of the different coatings and of time of recovering, the implants coated with crystalline calcium phosphate layers by laser ablation present a better result than the amorphous-calcium-phosphate-coated implants. Moreover, the constant presence of chondroid tissue, related with the mechanical induction by forces applied on the recovering area, strongly suggests that the mechanisms implied in osteointegration are related to endomembranous, rather than endochondral ossification processes

Uusien polyuretaanimateriaalien kehittäminen

Polyuretaanielastomeerit ovat jaksottaisia sekapolymeerejä, jotka muodostuvat vuoroittaisista joustavien ketjujen segmenteistä ja hyvin polaarisista kovista segmenteistä. Kemiallinen rakenne ja ominaisuudet riippuvat käytetyistä reaktiokomponenteista. Pehmeän segmentin muodostaa polyoli ja kovan segmentin muodostaa yleensä di-isosyanaatti ja ketjunjatkaja. Polyuretaanielastomeerien valmistus tapahtuu valamalla, jolloin reaktiokomponentit ovat nestemäisiä. Työssä tutkittiin kahta perusmateriaalia ja yhden lisäaineen vaikutusta niiden ominaisuuksiin. Erityisesti kiinnitettiin huomiota dynaamisiin ja mekaanisiin ominaisuuksiin ja verrattiin aineita keskenään. Käytettyjä karakterisointimenetelmiä olivat kontaktikulmamittaukset, DMTA-mittaukset, dynaaminen rasittaminen pyörityslaitteella, elektronimikroskopia, hydrolyysitesti, vetotesti ja kulutustesti. Tutkittujen materiaalien pääasiallinen käyttökohde on pyörä- tai telapinnoitteena. Työn aikana kehitettiin pyörityslaite, jolla voitiin tutkia pinnoitemateriaalin käyttäytymistä halutuissa rasitusolosuhteissa. Lisäaineen vaikutus dynaamisiin ominaisuuksiin oli negatiivinen tai olematon, sillä DMTA-testien perusteella lisäaine kasvatti materiaalien häviötekijää (tan d). Pyöritystestien perusteella lisäaineella ei ollut vaikutusta hystereesiin eli pinnoitemateriaalin lämpenemiseen testin aikana. Uusi tutkittu materiaali osoittautui dynaamisissa kokeissa paremmaksi kuin vanha tuotantomateriaali. Lisäaine kasvatti molempien tutkittujen aineiden pintaenergiaa kontaktikulmamittausten perusteella. Tuotantoaineen vetomurtolujuus kasvoi lisäaineen vaikutuksesta, mutta uuden aineen vetomurtolujuus pieneni. Lisäaineella oli lievä hydrolyysiltä suojaava vaikutus tutkituilla perusaineilla. Uusi tutkittu perusmateriaali sieti hydrolyysiä paremmin kuin tuotantomateriaali, koska sen valmistuksessa käytettiin polyeetteripolyolia ja tuotantomateriaalissa polyesteripolyolia.

Piirilevyn emissiivisyyden vakiointi lämpökamerasovelluksiin

Lämpökameroiden kehitys on mahdollistanut lämpökameroiden käytön myös erittäin pienien kohteiden tarkastelussa. Luotettava absoluuttisten lämpötilojen selvittäminen lämpökameralla vaatii, että tarkasteltavan kohteen emissiivisyys on kauttaaltaan vakio ja tunnettu. Käytännössä erilaisten materiaalipintojen emissiivisyyksissä on merkittäviä eroja, mikä aiheuttaa virheitä mittaustuloksiin. Tutkimuksen tavoitteena oli löytää halpa ja käytännöllinen keino piirilevyn emissiivisyyden vakiointiin. Työssä kartoitettiin erilaisia pinnoitteita, joille tehtiin resistanssi-, impedanssi- sekä lämpökameramittaukset. Mittauksilla selvitettiin pinnoitteen soveltuvuus emissiivisyyden vakiointiin. Lisäksi tutustuttiin pintapuolisesti pinnoiteaineiden kemialliseen rakenteeseen, jotta saatiin peruskäsitys siitä, onko aineiden kemiallisella rakenteella merkitystä pinnoiteaineen emissiivisyyden vakiointikykyyn. Tutkimustulosten perusteella tutkituista pinnoitteista parhaaksi todettiin talkkijauhe. Talkkipinnoitteella saatiin luotettavia mittaustuloksia. Tällä hetkellä pinnoitemenetelmää voidaan käyttää yksittäisten piirilevyjen testauksessa laboratorio-olosuhteissa. Tulevaisuudessa menetelmää voitaisiin soveltaa myös piirilevyjen tuotantolinjalle.

Tribologia de Recubrimientos de Cermet/NiCrBSi Aplicables a la Obtencion de Recubrimientos y Conformados Resistentes al Desgaste

El trabajo consta de un completo estudio tribológico del sistema WX que consiste en la mezcla mecánica de WC-12Co y NiCrBSi en diferentes proporciones: 20% NiCrBSi (W2), 40% NiCrBSi (W4) y 60% NiCrBSi (W6). Los recubrimientos se han obtenido por proyección térmica de alta velocidad (HVOF). Para todos los sistemas, el coeficiente de fricción es menor que 0.5 y la energía intercambiada entre el par friccionante y el recubrimiento es inferior a 10 KJ. Para cuantificar el desgaste por fricción se han utilizado la profundidad de la huella y el volumen perdido durante el ensayo, obtenidos mediante Interferometría de Barrido de Luz Blanca (SLWI) y SEM. La profundidad de la huella sigue una evolución directamente proporcional al contenido en NiCrBSi. Un mayor contenido en WC-12Co aumenta la resistencia al desgaste por fricción y disminuye la velocidad de desgaste por abrasión (ensayo Rubber Wheel). En los recubrimientos obtenidos, no se observa difusión entre las fases, la adherencia con el sustrato es excelente, la porosidad menor al 2% y se produce un incremento de la dureza del recubrimiento debido al endurecimiento por trabajo de la matriz causada por impacto.

Asiakkuuksien johtamisen kehittäminen, Tapaustutkimus

CRM eli Customer Relationship Management on muutaman vuoden ajan saanut osakseen merkittävästi huomiota yritysmaailmassa. Suurista lupauksista huolimatta CRM on aiheuttanut runsaasti pettymyksiä sen kehittämiseen ryhtyneissä yrityksissä. Tämän tutkimuksen tavoite on selvittää, miten CRM: a eli suomennettuna asiakkuuksien johtamista voidaan kehittää menestyksekkäästi tutkimuksen kohdeyrityksessä. Tähän pyritään laadullisin menetelmin toteutetulla tapaustutkimuksella hermeneuttista lähestymistapaa noudattaen. Asiakkuuksien johtaminen on prosessi, jossa organisaation vastuujaon, toiminta-prosessien ja teknologioiden muodostama kokonaisuus organisoidaan tukemaan asiakkuuslähtöistä strategiaa. CRM ei ole tietojärjestelmäprojekti eikä sitä voida koskaan kehittää lopullisen täydelliseksi, koska sen kokonaisuuden muodostavat osat kohtaavat jatkuvasti muutospaineita ympäristössään. Asiakkuuksien johtamista kehitettäessä tulee kohdeyrityksessä ensin muodostaa asiakkuuslähtöinen strategia ja tämän perusteella tarkistaa toimintojensa rooleja ja toimintaprosesseja ja viimeisenä kehittää näitä tukeva tietojärjestelmäkokonaisuus. Kehittämisen onnistumisen edellytyksiä kohdeyrityksen tapauksessa ovat erityisesti CRM- käsitteiden selventäminen, suunnittelun merkityksen ymmärtäminen, johdon tuen hankkiminen, puolueettoman hankkeen omistajan nimeäminen, muutosjohtaminen ja tietojärjestelmäkeskeisyyden hylkääminen. Tulokset saattavat olla suuntaa-antavasti sovellettavissa ainakin vastaavassa lähtötilanteessa oleviin muihinkin yrityksiin.

Platform Architectures for Policy-Based Network Access Control

Tämä diplomityö käsittelee sääntöpohjaisen verkkoon pääsyn hallinnan (NAC) ratkaisuja arkkitehtonisesta näkökulmasta. Työssä käydään läpi Trusted Computing Groupin, Microsoft Corporationin, Juniper Networksin sekä Cisco Systemsin NAC-ratkaisuja. NAC koostuu joukosta uusia sekä jo olemassa olevia teknologioita, jotka auttavat ennalta määriteltyyn sääntökantaan perustuen hallitsemaan suojattuun verkkoon pyrkivien laitteiden tietoliikenneyhteyksiä. Käyttäjän tunnistamisen lisäksi NAC pystyy rajoittamaan verkkoon pääsyä laitekohtaisten ominaisuuksien perusteella, esimerkiksi virustunnisteisiin ja käyttöjärjestelmäpäivityksiin liittyen ja paikkaamaan tietyin rajoituksin näissä esiintyviä puutteita verkkoon pääsyn sallimiseksi. NAC on verraten uusi käsite, jolta puuttuu tarkka määritelmä. Tästä johtuen nykymarkkinoilla myydään ominaisuuksiltaan puutteellisia tuotteita NAC-nimikkeellä. Standardointi eri valmistajien NAC-komponenttien yhteentoimivuuden takaamiseksi on meneillään, minkä perusteella ratkaisut voidaan jakaa joko avoimia standardeja tai valmistajakohtaisia standardeja noudattaviksi. Esitellyt NAC-ratkaisut noudattavat standardeja joko rajoitetusti tai eivät lainkaan. Mikään läpikäydyistä ratkaisuista ei ole täydellinen NAC, mutta Juniper Networksin ratkaisu nousee niistä potentiaalisimmaksi jatkokehityksen ja -tutkimuksen kohteeksi TietoEnator Processing & Networks Oy:lle. Eräs keskeinen ongelma NAC-konseptissa on työaseman tietoverkolle toimittama mahdollisesti valheellinen tietoturvatarkistuksen tulos, minkä perusteella pääsyä osittain hallitaan. Muun muassa tähän ongelmaan ratkaisuna voisi olla jo nykytietokoneista löytyvä TPM-siru, mikä takaa tiedon oikeellisuuden ja koskemattomuuden.

Estudio Mediante Tecnicas Interferometricas de las Propiedades Tribologicas de la ZrO2 Obtenida por Proyeccion Termica

Las barreras térmicas poseen unas propiedades mecánicas y tribológicas limitadas. Los tratamientos térmicos de sintetizado pueden utilizarse como una posible solución para su mejora. En el presente trabajo se evalúa la evolución de diversas propiedades tribológicas y mecánicas, a diferentes tiempos de sinterización, a temperatura de 1.000 °C. Se observa que el sintetizado produce un aumento de la resistencia al desgaste, de la dureza y del módulo de Young. A partir de los ensayos ball-on-disk, realizados utilizando un par friccionante de ZrO2 y de acero, se han estudiado los mecanismos de desgaste dominantes para cada uno de los pares friccionantes. Se ha observado que la delaminación entre partículas y la fractura frágil durante el proceso de desgaste son los mecanismos principales que controlan el proceso. Los caminos de desgaste estudiados mediante microscopía electrónica de barrido (SEM) e interferometría de barrido de luz blanca (SWLI) han permitido cuantificar el desgaste en cada uno de los casos. A fin de poder estudiar los recubrimientos de ZrO2 mediante SEM y SWLI ha sido necesario realizar una metalización con oro para así aumentar la conductividad eléctrica y reflectividad de las muestras.

One-seller assignment markets with multi-unit demands

We consider one-seller assignment markets with multi-unit demands and prove that the associated game is buyers-submodular. Therefore the core is non-empty and it has a lattice structure which contains the allocation where every buyer receives his marginal contribution. We prove that in this kind of market, every pairwise-stable outcome is associated to a competitive equilibrium and viceversa. We study conditions under which the buyers-optimal and the seller-optimal core allocations are competitive equilibrium payoff vectors. Moreover, we characterize the markets for which the core coincidences with the set of competitive equilibria payoff vectors. When agents behave strategically, we introduce a procedure that implements the buyers-optimal core allocation as the unique subgame perfect Nash equilibrium outcome.

Drug-eluting stents compared to bare-metal stents improve short-term survival in patients with acute myocardial infarction undergoing primary percutaneous coronary intervention: a nationwide prospective analysis of the AMIS Plus registry.

BACKGROUND: Recently, it has been suggested that the type of stent used in primary percutaneous coronary interventions (pPCI) might impact upon the outcomes of patients with acute myocardial infarction (AMI). Indeed, drug-eluting stents (DES) reduce neointimal hyperplasia compared to bare-metal stents (BMS). Moreover, the later generation DES, due to its biocompatible polymer coatings and stent design, allows for greater deliverability, improved endothelial healing and therefore less restenosis and thrombus generation. However, data on the safety and performance of DES in large cohorts of AMI is still limited. AIM: To compare the early outcome of DES vs. BMS in AMI patients. METHODS: This was a prospective, multicentre analysis containing patients from 64 hospitals in Switzerland with AMI undergoing pPCI between 2005 and 2013. The primary endpoint was in-hospital all-cause death, whereas the secondary endpoint included a composite measure of major adverse cardiac and cerebrovascular events (MACCE) of death, reinfarction, and cerebrovascular event. RESULTS: Of 20,464 patients with a primary diagnosis of AMI and enrolled to the AMIS Plus registry, 15,026 were referred for pPCI and 13,442 received stent implantation. 10,094 patients were implanted with DES and 2,260 with BMS. The overall in-hospital mortality was significantly lower in patients with DES compared to those with BMS implantation (2.6% vs. 7.1%,p < 0.001). The overall in-hospital MACCE after DES was similarly lower compared to BMS (3.5% vs. 7.6%, p < 0.001). After adjusting for all confounding covariables, DES remained an independent predictor for lower in-hospital mortality (OR 0.51,95% CI 0.40-0.67, p < 0.001). Since groups differed as regards to baseline characteristics and pharmacological treatment, we performed a propensity score matching (PSM) to limit potential biases. Even after the PSM, DES implantation remained independently associated with a reduced risk of in-hospital mortality (adjusted OR 0.54, 95% CI 0.39-0.76, p < 0.001). CONCLUSIONS: In unselected patients from a nationwide, real-world cohort, we found DES, compared to BMS, was associated with lower in-hospital mortality and MACCE. The identification of optimal treatment strategies of patients with AMI needs further randomised evaluation; however, our findings suggest a potential benefit with DES.

Anatomy of liver arteries for interventional radiology.

The availability of intra-arterial hepatic therapies (radio and/or chemo-embolisation, intra-arterial hepatic chemotherapy) has convinced radiologists to perfect their knowledge of the anatomy of the liver arteries. These sometimes, complex procedures most often require selective arterial catheterization. Knowledge of the different arteries in the liver and the peripheral organs is therefore essential to optimize the procedure and avoid eventual complications. This paper aims to describe the anatomy of the liver arteries and the variants, applying it to angiography images, and to understand the implications of such variations in interventional radiological procedures.

A Legislator under Surveillance: The Creation and Implementation of Swiss Banking Legislation 1910-1934

This paper analyses how banking regulation was introduced in Switzerland - one of the world's most prominent financial centres - which remained in place until the beginning of the twenty-first century. It shows that the law adopted on 8 November 1934 is a perfect example of capture of the regulator by the regulated. Essentially a political response in the context of the economic crisis of the 1930s, it largely reflected the interests of banking circles by limiting the intervention of the State as much as possible. The introduction of the new legislation was facilitated by the temporary weakness of Swiss banking circles, as they depended on the State to delay or prevent the collapse of many major credit institutions. They did not manage to derail the law as they had two decades earlier when they scuppered the federal bill on banks drawn up between 1914 and 1916. But this time they were better organized and more united, and intervened all the more effectively in the legislative process itself. The 1934 law is thus distinctive in that it made no structural changes to the architecture of the financial centre but merely codified its practices through flexible legislation meant to reassure the public. The law was aimed less at controlling banking activity than at keeping - thanks to skilfully calibrated political concessions - the State from having to intervene more directly in the internal management of banks or in the fixing of interest rates and the export of capital.

Palveluiden hinnoittelumallit

Tässä työssä kuvataan erilaisia malleja palveluiden hinnoitteluun. Työn tavoitteena on saada kokonaiskuva erilaisista palveluiden hinnoittelumalleista. Lähtökohtana ovat palveluiden, hinnan, hinnoittelun ja kustannusten määritelmät. Malleista kuvataan hinnoittelun peruste, yleisiä käyttökohteita sekä vahvuuksia ja heikkouksia. Eri mallit on jaettu kahteen osaan. Yrityskohtaiset mallit kuvaavat laajasti hinnoitteluprosessia. Yksityiskohtaisemmat palvelukohtaiset mallit on jaettu resurssi-, tuotos-, käyttöoikeus- ja käyttöperusteisiin, sekä hyöty- ja arvoperusteisiin menetelmiin. Täydellistä kaikille palveluille sopivaa hinnoittelumenetelmää ei ole. Jokaisessa mallissa on heikkouksia ja vahvuuksia. Eri menetelmät soveltuvat erilaisiin tilanteisiin ja niitä käytetään yrityksissä usein rinnakkain niin sanottuina hybridimalleina. Lisäksi palveluiden hinnoitteluun liittyy yllättävän paljon intuitiota ja kokemuksellista tietoa.

Measurement Properties of the Smartphone-Based B-B Score in Current Shoulder Pathologies.

NlmCategory="UNASSIGNED">This study is aimed at the determination of the measurement properties of the shoulder function B-B Score measured with a smartphone. This score measures the symmetry between sides of a power-related metric for two selected movements, with 100% representing perfect symmetry. Twenty healthy participants, 20 patients with rotator cuff conditions, 23 with fractures, 22 with capsulitis, and 23 with shoulder instabilities were measured twice across a six-month interval using the B-B Score and shoulder function questionnaires. The discriminative power, responsiveness, diagnostic power, concurrent validity, minimal detectable change (MDC), minimal clinically important improvement (MCII), and patient acceptable symptom state (PASS) were evaluated. Significant differences with the control group and significant baseline-six-month differences were found for the rotator cuff condition, fracture, and capsulitis patient groups. The B-B Score was responsive and demonstrated excellent diagnostic power, except for shoulder instability. The correlations with clinical scores were generally moderate to high, but lower for instability. The MDC was 18.1%, the MCII was 25.2%, and the PASS was 77.6. No floor effect was observed. The B-B Score demonstrated excellent measurement properties in populations with rotator cuff conditions, proximal humerus fractures, and capsulitis, and can thus be used as a routine test to evaluate those patients.

Proportionality and Party Success in Europe

This thesis consists of four articles and an introductory section. The main research questions in all the articles are about proportionality and party success in Europe, at European, national or district levels. Proportionality in this thesis denotes the proximity of seat shares parties receive compared to their respective vote shares, after the electoral system’s allocation process. This proportionality can be measured through numerous indices that illustrate either the overall proportionality of an electoral system or a particular election. The correspondence of a single party’s seat shares to its vote shares can also be measured. The overall proportionality is essential in three of the articles (1, 2 and 4), where the system’s performance is studied by means of plots. In article 3, minority party success is measured by advantage-ratios that reveal single party’s winnings or losses in the votes to seat allocation process. The first article asks how proportional are the European parliamentary (EP) electoral systems, how do they compare with results gained from earlier studies and how do the EP electoral systems treat different sized parties. The reasons for different outcomes are looked for in explanations given by traditional electoral studies i.e. electoral system variables. The countries studied (EU15) apply electoral systems that vary in many important aspects, even though a certain amount of uniformity has been aspired to for decades. Since the electoral systems of the EP elections closely resemble the national elections, the same kinds of profiles emerge as in the national elections. The electoral systems indeed treat the parties differentially and six different profile types can be found. The counting method seems to somewhat determine the profile group, but the strongest variables determining the shape of a countries’ profile appears to be the average district magnitude and number of seats allocated to each country. The second article also focuses on overall proportionality performance of an electoral system, but here the focus is on the impact of electoral system changes. I have developed a new method of visualizing some previously used indices and some new indices for this purpose. The aim is to draw a comparable picture of these electoral systems’ changes and their effects. The cases, which illustrate this method, are four elections systems, where a change has occurred in one of the system variables, while the rest remained unchanged. The studied cases include the French, Greek and British European parliamentary systems and the Swedish national parliamentary system. The changed variables are electoral type (plurality changed to PR in the UK), magnitude (France splitting the nationwide district into eight smaller districts), legal threshold (Greece introducing a three percent threshold) and counting method (d’Hondt was changed to modified Sainte-Laguë in Sweden). The radar plots from elections after and before the changes are drawn for all country cases. When quantifying the change, the change in the plots area that is created has also been calculated. Using these radar plots we can observe that the change in electoral system type, magnitude, and also to some extent legal threshold had an effect on overall proportionality and accessibility for small parties, while the change between the two highest averages counting method had none. The third article studies the success minority parties have had in nine electoral systems in European heterogeneous countries. This article aims to add more motivation as to why we should care how different sized parties are treated by the electoral systems. Since many of the parties that aspire to represent minorities in European countries are small, the possibilities for small parties are highlighted. The theory of consociational (or power-sharing) democracy suggests that, in heterogeneous societies, a proportional electoral system will provide the fairest treatment of minority parties. The OSCE Lund Recommendations propose a number of electoral system features, which would improve minority representation. In this article some party variables, namely the unity of the minority parties and the geographical concentration of the minorities were included among possible explanations. The conclusions are that the central points affecting minority success were indeed these non-electoral system variables rather than the electoral system itself. Moreover, the size of the party was a major factor governing success in all the systems investigated; large parties benefited in all the studied electoral systems. In the fourth article the proportionality profiles are again applied, but this time to district level results in Finnish parliamentary elections. The level of proportionality distortion is also studied by way of indices. The average magnitudes during the studied periodrange from 7.5 to 26.2 in the Finnish electoral districts and this opens up unequal opportunities for parties in different districts and affects the shape of the profiles. The intra-country case allows the focus to be placed on the effect of district magnitude, since all other electoral systems are kept constant in an intra-country study. The time span in the study is from 1962 to 2007, i.e. the time that the districts have largely been the same geographically. The plots and indices tell the same story, district magnitude and electoral alliances matter. The district magnitude is connected to the overall proportionality of the electoral districts according to both indices, and the profiles are, as expected, also closer to perfect proportionality in large districts. Alliances have helped some small parties to gain a much higher seat share than their respective vote share and these successes affect some of the profiles. The profiles also show a consistent pattern of benefits for the small parties who ally with the larger parties.