Growth and magnetic properties of ferromagnetic Co nanorods filled inside carbon nanotubes towards nanoscale spintronics

We synthesize Co nanorod filled inside multi-walled CNTs (MWCNTs) by microwave plasma enhanced chemical vapor deposition (MPECVD) and utilize off-axis electron holography to observe the remanent states of the filled metal nanorod inside MWCNTs at room. The MWCNTs grew up to 100-110 nm in diameter and 1.5-1.7 μm in length. The typical bright-field transmission electron microscope (TEM) images revealed both Co/Pd multisegment nanorod and Co nanorod filled inside MWCNTs on the same substrate. We have also performed energy-dispersive X-ray spectrometer (EDS) measurements to characterize the composition of metal filled inside MWCNTs. Based on high-resolution TEM measurements, we observed the face-centered-cubic (fcc) Co filled inside MWCNT. The component of magnetic induction was then measured to be 1.2±0.1 T, which is lower than the expected saturation magnetization of fcc Co of 1.7 T. The partial oxidation of the ferromagnetic metal during the process and the magnetization direction may play an important role in the determination of the quality of the remanent states. © 2008 IEEE.

三种兰科植物的保护遗传学研究

本研究在野外调查的基础上，采用随机扩增多态DNA (RAPD)分析和形态学方法，研究了我国三种珍稀濒危兰科植物硬叶兜兰（Paphiopedilummicranthum）、麻栗坡兜兰（P. malipoense）和独花兰（Changnienia amoena）的遗传多样性与群体遗传结构，主要结果如下： 1．采用1 2个引物对分布于我国云贵地区的4个硬叶兜兰群体共161个体进行RAPD扩增和分析，得出物种水平的多态条带百分率（PPB）为71.6%，Nci的基因多样度(h)为0.217，Shannon多样性指数（1)为0.3301;4个群体的平均多样性水平为PPB=45.2%，h=0.1457，1= 0.2204：低于远交兰花的平均水平。分子方差分析(AMOVA)表明，在总遗传变异中，群体间遗传变异占20.31%．群体内占79.69%;POPGENE给出的基因分化系数 （Gst）为0.2958;遗传分化略高于远交物种的平均水平。空间自相关分析表明，所检测的两个群体中存在明显的空间结构，基因型在群体中以不同的小斑块存在。遗传距离和空间距离不存在相关关系。 2．用于麻栗坡兜兰的RAPD引物同上，但取样范围只有贵州的2个群体共10个个体。就所研究的个体柬看，麻栗坡兜兰的遗传多样性明显低于远交兰花物种的平均水平。物种水平上，多态条带百分率(PPB)为49.5%。Nei的基因多样度（h）为0. 1174， Shannon多样性指数(I)为0.1764：在群体水平上，上述三个指标的平均值则分别为12. 75%、0.0486和0.0712，均大大低于硬叶兜兰。然而，尽管作了种种努力，麻栗坡兜兰的取样个体数量仍很少，因此所得结果可能会有误差。 3．用16个引物对分布于河南、湖北、湖南、江西4个省11个独花兰群体共216个体进行了RA PD扩增和分析，独花兰在物种水平PPB=80. 7%，h=0.197．1=0. 3116;在群体水平，上述三个指标的平均值则分别为40. 9%、0.1247和0. 1902，均低于远交兰花的平均水平。AMOVA分析表明，11个独花兰群体间的遗传变异占43.48%，群体内的占56.52%：在神农架和新宁地区内部，群体间的遗传变异分别占13.68%和49.3g%(AMOVA)。POPGENE给出的11个群体的基因分化系数(Gst)为0.3580．神农架和新宁地区内的Gst，值分别为0.1194和0.2597。可见，群体间的遗传分化明显高于远交物种的平均水平。空间自相关分析表明，独花兰的遗传变异在群体内不存在明显的空间结构。群体之间的遗传距离和空间距离不存在相关关系。 4．对独花兰7个群体形态性状的分析发现，12个形态性状在群体内均有较高的变异性，cv值变动于0.022-0.30O。庐山群体(LS)在所有性状上的平均值均为最高。营养性状和花部性状的变异性基本一致。除花葶长和花距直径与某些花部性状之间没有显著的相关关系外，各性状之间均有显著的相关性。对XN4群体的统计没有发现假磷茎数目与其他性状之间存在显著相关性。 根据以上对硬叶兜兰、麻粟坡兜兰和独花兰遗传多样性和群体遗传结构韵研究，结合其他方面的资料;对三种兰花的濒危机制进行了初步的分析。首先，人为采挖和破坏是导致这些兰花物种濒危的直接原因，尤其是麻栗坡兜兰。其次， 适宜兰花生存的生境正在只益萎缩、退化和片段化。这两方面因素的共同作用导致上述兰花群体的数目和规模日益下降，由此引发的遗传多样性降低和遗传结构的改变进一步加剧其濒危状况。对于独花兰而言，较低的繁殖能力又使其生存状态雪上加霜。针对三个物种不同的繁殖特性和遗传学状况，提出如下保护措施。(1)硬叶兜兰由于繁殖能力较强、现存个体尚多，遗传多样性损失不甚严重，因此以保护其所在的生境为基础、实施原位保护，是比较合适的保护策略。(2)麻粟坡兜兰目前受破坏程度非常严重;所剩个体很少，遗传多样性较低，已经很难进行有效的原位保护。因此;应利用迁地保护手段抢救目前尚存的个体。(3)独花兰的繁殖能力较弱，因此在保护生境和严禁采摘的基础上，可采用人工授粉等方式，提高结实率、增加繁殖效率，促使其复壮：在进行迁地保护时，则应注意不同群体间存在较大遗传变异而群体内多样性较低这一现实。

Ultrasound elastography as an adjuvant to conventional ultrasound in the preoperative assessment of axillary lymph nodes in suspected breast cancer: a pilot study.

AIMS: To compare the performance of ultrasound elastography with conventional ultrasound in the assessment of axillary lymph nodes in suspected breast cancer and whether ultrasound elastography as an adjunct to conventional ultrasound can increase the sensitivity of conventional ultrasound used alone. MATERIALS AND METHODS: Fifty symptomatic women with a sonographic suspicion for breast cancer underwent ultrasound elastography of the ipsilateral axilla concurrent with conventional ultrasound being performed as part of triple assessment. Elastograms were visually scored, strain measurements calculated and node area and perimeter measurements taken. Theoretical biopsy cut points were selected. The sensitivity, specificity, positive predictive value (PPV), and negative predictive values (NPV) were calculated and receiver operating characteristic (ROC) analysis was performed and compared for elastograms and conventional ultrasound images with surgical histology as the reference standard. RESULTS: The mean age of the women was 57 years. Twenty-nine out of 50 of the nodes were histologically negative on surgical histology and 21 were positive. The sensitivity, specificity, PPV, and NPV for conventional ultrasound were 76, 78, 70, and 81%, respectively; 90, 86, 83, and 93%, respectively, for visual ultrasound elastography; and for strain scoring, 100, 48, 58 and 100%, respectively. There was no significant difference between any of the node measurements CONCLUSIONS: Initial experience with ultrasound elastography of axillary lymph nodes, showed that it is more sensitive than conventional ultrasound in detecting abnormal nodes in the axilla in cases of suspected breast cancer. The specificity remained acceptable and ultrasound elastography used as an adjunct to conventional ultrasound has the potential to improve the performance of conventional ultrasound alone.

Preservation of prawns with chemicals

The preservation of prawns with boric acid, dipotassium hydrogen phosphate, sodium bisulphite, ascorbic acid, citric ascorbic acid mixture, acronise pd, foromycin and penicillin have been investigated. Acronise pd, foromycin and citric ascorbic acid mixture in the order named proved the most effective inhibitors of growth of the natural mixture flora at temperatures between -18°C and 28°C; while foromycin inhibited yeast growth and sodium bisulphite and boric acid retarded melanosis. Acronise pd caused marked inhibition of bacterial growth in 5 to 50 per ml concentration, when used as an immersion medium for 10 to 15 minutes. The other chemicals used exerted a less intense action or were without any effect.

Effects of rotating inlet distortion on multistage compressor stability

In multi-spool engines, rotating stall in an upstream compressor will impose a rotating distortion on the downstream compressor, thereby affecting its stability margin. In this paper experiments are described in which this effect was simulated by a rotating screen upstream of several multistage low-speed compressors. The measurements are complemented by, and compared with, a theoretical model of multistage compressor response to speed and direction of rotation of an inlet distortion. For co-rotating distortions (i.e., distortions rotating in the same direction as rotor rotation), experiments show that the compressors exhibited significant loss in stability margin and that they could be divided into two groups according to their response. The first group exhibited a single peak in stall margin degradation when the distortion speed corresponded to roughly 50% of rotor speed. The second group showed two peaks in stall margin degradation corresponding to distortion speeds of approximately 25-35% and 70-75% of rotor speed. These new results demonstrate that multistage compressors can have more than a single resonant response. Detailed measurements suggest that the two types of behavior are linked to differences between the stall inception processes observed for the two groups of compressors and that a direct connection thus exists between the observed forced response and the unsteady flow phenomena at stall onset. For counter-rotational distortions, all the compressors tested showed minimal loss of stability margin. The results imply that counter-rotation of the fan and core compressor, or LP and HP compressors, could be a worthwhile design choice. Calculations based on the two-dimensional theoretical model show excellent agreement for the compressors which had a single peak for stall margin degradation. We take this first-of-a-kind comparison as showing that the model, though simplified, captures the essential fluid dynamic features of the phenomena. Agreement is not good for compressors which had two peaks in the curve of stall margin shift versus distortion rotation speed. The discrepancy is attributed to the three-dimensional and short length scale nature of the stall inception process in these machines; this includes phenomena that have not yet been addressed in any model.