Exposure to solute stress affects genome-wide expression but not the polycyclic aromatic hydrocarbon-degrading activity of Sphingomonas sp. strain LH128 in biofilms.

Members of the genus Sphingomonas are important catalysts for removal of polycyclic aromatic hydrocarbons (PAHs) in soil, but their activity can be affected by various stress factors. This study examines the physiological and genome-wide transcription response of the phenanthrene-degrading Sphingomonas sp. strain LH128 in biofilms to solute stress (invoked by 450 mM NaCl solution), either as an acute (4-h) or a chronic (3-day) exposure. The degree of membrane fatty acid saturation was increased as a response to chronic stress. Oxygen consumption in the biofilms and phenanthrene mineralization activities of biofilm cells were, however, not significantly affected after imposing either acute or chronic stress. This finding was in agreement with the transcriptomic data, since genes involved in PAH degradation were not differentially expressed in stressed conditions compared to nonstressed conditions. The transcriptomic data suggest that LH128 adapts to NaCl stress by (i) increasing the expression of genes coping with osmolytic and ionic stress such as biosynthesis of compatible solutes and regulation of ion homeostasis, (ii) increasing the expression of genes involved in general stress response, (iii) changing the expression of general and specific regulatory functions, and (iv) decreasing the expression of protein synthesis such as proteins involved in motility. Differences in gene expression between cells under acute and chronic stress suggest that LH128 goes through changes in genome-wide expression to fully adapt to NaCl stress, without significantly changing phenanthrene degrading activity.

Effect of rock powder and vinasse on two types of soils

Can vinasse accelerate the change of minerals in rock dust to obtain fertilizers, using residues from alcohol agro-industries and mining? Answering this question was the main objective of this study. Therefore, an experiment was set up in the laboratory in a completely randomized design using Polyvinyl Chloride (PVC) columns, in which the 0-50 cm layers of a clayey soil (eutroferric Red Oxisol) and sandy soil (Typic Quartzipsamment) were reproduced. We applied three different rates of basalt powder (0.0; 2.0, and 4.0 t ha-1) and one rate of vinasse (200 m³ ha-1) to the soils. The control was made by treatments with water (200 m³ ha-1) with the same rates of rock powder. Samples were first collected on the surface of each column (1, 15, 30, 45, 60, and 90 days after the application of vinasse and rock powder), and, at the end of the experiment, at the various depths and in leached water, to determine pH and the concentration of soluble Ca2+, Mg2+, and K+. There was a significant effect of the solvent and the soil on the surface layer, with higher concentrations found in the treatments with vinasse and in clayey soil, confirming the potential of vinasse to alter minerals in basalt powder. The resulting levels from the beginning to the end of the experiment suggest that sorption phenomena with neoformed mineral phases or organic acids may have occurred. It may be concluded that the use of rock powder and vinasse mixtures is a promising alternative for soil fertilization and recycling of waste from the sugarcane and mining industries.

Reliability of methods used for the risk assessment of mixture of micropollutants in aquatic enviromments : from theoretical concepts to field observations

Ces dernières années, de nombreuses recherches ont mis en évidence les effets toxiques des micropolluants organiques pour les espèces de nos lacs et rivières. Cependant, la plupart de ces études se sont focalisées sur la toxicité des substances individuelles, alors que les organismes sont exposés tous les jours à des milliers de substances en mélange. Or les effets de ces cocktails ne sont pas négligeables. Cette thèse de doctorat s'est ainsi intéressée aux modèles permettant de prédire le risque environnemental de ces cocktails pour le milieu aquatique. Le principal objectif a été d'évaluer le risque écologique des mélanges de substances chimiques mesurées dans le Léman, mais aussi d'apporter un regard critique sur les méthodologies utilisées afin de proposer certaines adaptations pour une meilleure estimation du risque. Dans la première partie de ce travail, le risque des mélanges de pesticides et médicaments pour le Rhône et pour le Léman a été établi en utilisant des approches envisagées notamment dans la législation européenne. Il s'agit d'approches de « screening », c'est-à-dire permettant une évaluation générale du risque des mélanges. Une telle approche permet de mettre en évidence les substances les plus problématiques, c'est-à-dire contribuant le plus à la toxicité du mélange. Dans notre cas, il s'agit essentiellement de 4 pesticides. L'étude met également en évidence que toutes les substances, même en trace infime, contribuent à l'effet du mélange. Cette constatation a des implications en terme de gestion de l'environnement. En effet, ceci implique qu'il faut réduire toutes les sources de polluants, et pas seulement les plus problématiques. Mais l'approche proposée présente également un biais important au niveau conceptuel, ce qui rend son utilisation discutable, en dehors d'un screening, et nécessiterait une adaptation au niveau des facteurs de sécurité employés. Dans une deuxième partie, l'étude s'est portée sur l'utilisation des modèles de mélanges dans le calcul de risque environnemental. En effet, les modèles de mélanges ont été développés et validés espèce par espèce, et non pour une évaluation sur l'écosystème en entier. Leur utilisation devrait donc passer par un calcul par espèce, ce qui est rarement fait dû au manque de données écotoxicologiques à disposition. Le but a été donc de comparer, avec des valeurs générées aléatoirement, le calcul de risque effectué selon une méthode rigoureuse, espèce par espèce, avec celui effectué classiquement où les modèles sont appliqués sur l'ensemble de la communauté sans tenir compte des variations inter-espèces. Les résultats sont dans la majorité des cas similaires, ce qui valide l'approche utilisée traditionnellement. En revanche, ce travail a permis de déterminer certains cas où l'application classique peut conduire à une sous- ou sur-estimation du risque. Enfin, une dernière partie de cette thèse s'est intéressée à l'influence que les cocktails de micropolluants ont pu avoir sur les communautés in situ. Pour ce faire, une approche en deux temps a été adoptée. Tout d'abord la toxicité de quatorze herbicides détectés dans le Léman a été déterminée. Sur la période étudiée, de 2004 à 2009, cette toxicité due aux herbicides a diminué, passant de 4% d'espèces affectées à moins de 1%. Ensuite, la question était de savoir si cette diminution de toxicité avait un impact sur le développement de certaines espèces au sein de la communauté des algues. Pour ce faire, l'utilisation statistique a permis d'isoler d'autres facteurs pouvant avoir une influence sur la flore, comme la température de l'eau ou la présence de phosphates, et ainsi de constater quelles espèces se sont révélées avoir été influencées, positivement ou négativement, par la diminution de la toxicité dans le lac au fil du temps. Fait intéressant, une partie d'entre-elles avait déjà montré des comportements similaires dans des études en mésocosmes. En conclusion, ce travail montre qu'il existe des modèles robustes pour prédire le risque des mélanges de micropolluants sur les espèces aquatiques, et qu'ils peuvent être utilisés pour expliquer le rôle des substances dans le fonctionnement des écosystèmes. Toutefois, ces modèles ont bien sûr des limites et des hypothèses sous-jacentes qu'il est important de considérer lors de leur application. - Depuis plusieurs années, les risques que posent les micropolluants organiques pour le milieu aquatique préoccupent grandement les scientifiques ainsi que notre société. En effet, de nombreuses recherches ont mis en évidence les effets toxiques que peuvent avoir ces substances chimiques sur les espèces de nos lacs et rivières, quand elles se retrouvent exposées à des concentrations aiguës ou chroniques. Cependant, la plupart de ces études se sont focalisées sur la toxicité des substances individuelles, c'est à dire considérées séparément. Actuellement, il en est de même dans les procédures de régulation européennes, concernant la partie évaluation du risque pour l'environnement d'une substance. Or, les organismes sont exposés tous les jours à des milliers de substances en mélange, et les effets de ces "cocktails" ne sont pas négligeables. L'évaluation du risque écologique que pose ces mélanges de substances doit donc être abordé par de la manière la plus appropriée et la plus fiable possible. Dans la première partie de cette thèse, nous nous sommes intéressés aux méthodes actuellement envisagées à être intégrées dans les législations européennes pour l'évaluation du risque des mélanges pour le milieu aquatique. Ces méthodes sont basées sur le modèle d'addition des concentrations, avec l'utilisation des valeurs de concentrations des substances estimées sans effet dans le milieu (PNEC), ou à partir des valeurs des concentrations d'effet (CE50) sur certaines espèces d'un niveau trophique avec la prise en compte de facteurs de sécurité. Nous avons appliqué ces méthodes à deux cas spécifiques, le lac Léman et le Rhône situés en Suisse, et discuté les résultats de ces applications. Ces premières étapes d'évaluation ont montré que le risque des mélanges pour ces cas d'étude atteint rapidement une valeur au dessus d'un seuil critique. Cette valeur atteinte est généralement due à deux ou trois substances principales. Les procédures proposées permettent donc d'identifier les substances les plus problématiques pour lesquelles des mesures de gestion, telles que la réduction de leur entrée dans le milieu aquatique, devraient être envisagées. Cependant, nous avons également constaté que le niveau de risque associé à ces mélanges de substances n'est pas négligeable, même sans tenir compte de ces substances principales. En effet, l'accumulation des substances, même en traces infimes, atteint un seuil critique, ce qui devient plus difficile en terme de gestion du risque. En outre, nous avons souligné un manque de fiabilité dans ces procédures, qui peuvent conduire à des résultats contradictoires en terme de risque. Ceci est lié à l'incompatibilité des facteurs de sécurité utilisés dans les différentes méthodes. Dans la deuxième partie de la thèse, nous avons étudié la fiabilité de méthodes plus avancées dans la prédiction de l'effet des mélanges pour les communautés évoluant dans le système aquatique. Ces méthodes reposent sur le modèle d'addition des concentrations (CA) ou d'addition des réponses (RA) appliqués sur les courbes de distribution de la sensibilité des espèces (SSD) aux substances. En effet, les modèles de mélanges ont été développés et validés pour être appliqués espèce par espèce, et non pas sur plusieurs espèces agrégées simultanément dans les courbes SSD. Nous avons ainsi proposé une procédure plus rigoureuse, pour l'évaluation du risque d'un mélange, qui serait d'appliquer d'abord les modèles CA ou RA à chaque espèce séparément, et, dans une deuxième étape, combiner les résultats afin d'établir une courbe SSD du mélange. Malheureusement, cette méthode n'est pas applicable dans la plupart des cas, car elle nécessite trop de données généralement indisponibles. Par conséquent, nous avons comparé, avec des valeurs générées aléatoirement, le calcul de risque effectué selon cette méthode plus rigoureuse, avec celle effectuée traditionnellement, afin de caractériser la robustesse de cette approche qui consiste à appliquer les modèles de mélange sur les courbes SSD. Nos résultats ont montré que l'utilisation de CA directement sur les SSDs peut conduire à une sous-estimation de la concentration du mélange affectant 5 % ou 50% des espèces, en particulier lorsque les substances présentent un grand écart- type dans leur distribution de la sensibilité des espèces. L'application du modèle RA peut quant à lui conduire à une sur- ou sous-estimations, principalement en fonction de la pente des courbes dose- réponse de chaque espèce composant les SSDs. La sous-estimation avec RA devient potentiellement importante lorsque le rapport entre la EC50 et la EC10 de la courbe dose-réponse des espèces est plus petit que 100. Toutefois, la plupart des substances, selon des cas réels, présentent des données d' écotoxicité qui font que le risque du mélange calculé par la méthode des modèles appliqués directement sur les SSDs reste cohérent et surestimerait plutôt légèrement le risque. Ces résultats valident ainsi l'approche utilisée traditionnellement. Néanmoins, il faut garder à l'esprit cette source d'erreur lorsqu'on procède à une évaluation du risque d'un mélange avec cette méthode traditionnelle, en particulier quand les SSD présentent une distribution des données en dehors des limites déterminées dans cette étude. Enfin, dans la dernière partie de cette thèse, nous avons confronté des prédictions de l'effet de mélange avec des changements biologiques observés dans l'environnement. Dans cette étude, nous avons utilisé des données venant d'un suivi à long terme d'un grand lac européen, le lac Léman, ce qui offrait la possibilité d'évaluer dans quelle mesure la prédiction de la toxicité des mélanges d'herbicide expliquait les changements dans la composition de la communauté phytoplanctonique. Ceci à côté d'autres paramètres classiques de limnologie tels que les nutriments. Pour atteindre cet objectif, nous avons déterminé la toxicité des mélanges sur plusieurs années de 14 herbicides régulièrement détectés dans le lac, en utilisant les modèles CA et RA avec les courbes de distribution de la sensibilité des espèces. Un gradient temporel de toxicité décroissant a pu être constaté de 2004 à 2009. Une analyse de redondance et de redondance partielle, a montré que ce gradient explique une partie significative de la variation de la composition de la communauté phytoplanctonique, même après avoir enlevé l'effet de toutes les autres co-variables. De plus, certaines espèces révélées pour avoir été influencées, positivement ou négativement, par la diminution de la toxicité dans le lac au fil du temps, ont montré des comportements similaires dans des études en mésocosmes. On peut en conclure que la toxicité du mélange herbicide est l'un des paramètres clés pour expliquer les changements de phytoplancton dans le lac Léman. En conclusion, il existe diverses méthodes pour prédire le risque des mélanges de micropolluants sur les espèces aquatiques et celui-ci peut jouer un rôle dans le fonctionnement des écosystèmes. Toutefois, ces modèles ont bien sûr des limites et des hypothèses sous-jacentes qu'il est important de considérer lors de leur application, avant d'utiliser leurs résultats pour la gestion des risques environnementaux. - For several years now, the scientists as well as the society is concerned by the aquatic risk organic micropollutants may pose. Indeed, several researches have shown the toxic effects these substances may induce on organisms living in our lakes or rivers, especially when they are exposed to acute or chronic concentrations. However, most of the studies focused on the toxicity of single compounds, i.e. considered individually. The same also goes in the current European regulations concerning the risk assessment procedures for the environment of these substances. But aquatic organisms are typically exposed every day simultaneously to thousands of organic compounds. The toxic effects resulting of these "cocktails" cannot be neglected. The ecological risk assessment of mixtures of such compounds has therefore to be addressed by scientists in the most reliable and appropriate way. In the first part of this thesis, the procedures currently envisioned for the aquatic mixture risk assessment in European legislations are described. These methodologies are based on the mixture model of concentration addition and the use of the predicted no effect concentrations (PNEC) or effect concentrations (EC50) with assessment factors. These principal approaches were applied to two specific case studies, Lake Geneva and the River Rhône in Switzerland, including a discussion of the outcomes of such applications. These first level assessments showed that the mixture risks for these studied cases exceeded rapidly the critical value. This exceeding is generally due to two or three main substances. The proposed procedures allow therefore the identification of the most problematic substances for which management measures, such as a reduction of the entrance to the aquatic environment, should be envisioned. However, it was also showed that the risk levels associated with mixtures of compounds are not negligible, even without considering these main substances. Indeed, it is the sum of the substances that is problematic, which is more challenging in term of risk management. Moreover, a lack of reliability in the procedures was highlighted, which can lead to contradictory results in terms of risk. This result is linked to the inconsistency in the assessment factors applied in the different methods. In the second part of the thesis, the reliability of the more advanced procedures to predict the mixture effect to communities in the aquatic system were investigated. These established methodologies combine the model of concentration addition (CA) or response addition (RA) with species sensitivity distribution curves (SSD). Indeed, the mixture effect predictions were shown to be consistent only when the mixture models are applied on a single species, and not on several species simultaneously aggregated to SSDs. Hence, A more stringent procedure for mixture risk assessment is proposed, that would be to apply first the CA or RA models to each species separately and, in a second step, to combine the results to build an SSD for a mixture. Unfortunately, this methodology is not applicable in most cases, because it requires large data sets usually not available. Therefore, the differences between the two methodologies were studied with datasets created artificially to characterize the robustness of the traditional approach applying models on species sensitivity distribution. The results showed that the use of CA on SSD directly might lead to underestimations of the mixture concentration affecting 5% or 50% of species, especially when substances present a large standard deviation of the distribution from the sensitivity of the species. The application of RA can lead to over- or underestimates, depending mainly on the slope of the dose-response curves of the individual species. The potential underestimation with RA becomes important when the ratio between the EC50 and the EC10 for the dose-response curve of the species composing the SSD are smaller than 100. However, considering common real cases of ecotoxicity data for substances, the mixture risk calculated by the methodology applying mixture models directly on SSDs remains consistent and would rather slightly overestimate the risk. These results can be used as a theoretical validation of the currently applied methodology. Nevertheless, when assessing the risk of mixtures, one has to keep in mind this source of error with this classical methodology, especially when SSDs present a distribution of the data outside the range determined in this study Finally, in the last part of this thesis, we confronted the mixture effect predictions with biological changes observed in the environment. In this study, long-term monitoring of a European great lake, Lake Geneva, provides the opportunity to assess to what extent the predicted toxicity of herbicide mixtures explains the changes in the composition of the phytoplankton community next to other classical limnology parameters such as nutrients. To reach this goal, the gradient of the mixture toxicity of 14 herbicides regularly detected in the lake was calculated, using concentration addition and response addition models. A decreasing temporal gradient of toxicity was observed from 2004 to 2009. Redundancy analysis and partial redundancy analysis showed that this gradient explains a significant portion of the variation in phytoplankton community composition, even when having removed the effect of all other co-variables. Moreover, some species that were revealed to be influenced positively or negatively, by the decrease of toxicity in the lake over time, showed similar behaviors in mesocosms studies. It could be concluded that the herbicide mixture toxicity is one of the key parameters to explain phytoplankton changes in Lake Geneva. To conclude, different methods exist to predict the risk of mixture in the ecosystems. But their reliability varies depending on the underlying hypotheses. One should therefore carefully consider these hypotheses, as well as the limits of the approaches, before using the results for environmental risk management

EFFECT OF ALTERNATIVE MULTINUTRIENT SOURCES ON SOIL CHEMICAL PROPERTIES

The current high price of potassium chloride and the dependence of Brazil on imported materials to supply the domestic demand call for studies evaluating the efficiency of alternative sources of nutrients. The aim of this work was to evaluate the effect of silicate rock powder and a manganese mining by-product, and secondary materials originated from these two materials, on soil chemical properties and on brachiaria production. This greenhouse experiment was conducted in pots with 5 kg of soil (Latossolo Vermelho-Amarelo distrófico - Oxisol). The alternative nutrient sources were: verdete, verdete treated with NH4OH, phonolite, ultramafic rock, mining waste and the proportion of 75 % of these K fertilizers and 25 % lime. Mixtures containing 25 % of lime were heated at 800 ºC for 1 h. These sources were applied at rates of 0, 150, 300, 450 and 600 kg ha-1 K2O, and incubated for 45 days. The mixtures of heated silicate rocks with lime promoted higher increases in soil pH in decreasing order: ultramafic rock>verdete>phonolite>mining waste. Applying the mining waste-lime mixture increased soil exchangeable K, and available P when ultramafic rock was incorporated. When ultramafic rock was applied, the release of Ca2+ increased significantly. Mining subproduct released the highest amount of Zn2+ and Mn2+ to the soil. The application of alternative sources of K, with variable chemical composition, altered the nutrient availability and soil chemical properties, improving mainly plant development and K plant uptake, and are important nutrient sources.

Toward synthetic combinatorial peptide libraries in positional scanning format (PS-SCL)-based identification of CD8+ Tumor-reactive T-Cell Ligands: a comparative analysis of PS-SCL recognition by a single tumor-reactive CD8+ cytolytic T-lymphocyte clone.

The use of synthetic combinatorial peptide libraries in positional scanning format (PS-SCL) has emerged recently as an alternative approach for the identification of peptides recognized by T lymphocytes. The choice of both the PS-SCL used for screening experiments and the method used for data analysis are crucial for implementing this approach. With this aim, we tested the recognition of different PS-SCL by a tyrosinase 368-376-specific CTL clone and analyzed the data obtained with a recently developed biometric data analysis based on a model of independent and additive contribution of individual amino acids to peptide antigen recognition. Mixtures defined with amino acids present at the corresponding positions in the native sequence were among the most active for all of the libraries. Somewhat surprisingly, a higher number of native amino acids were identifiable by using amidated COOH-terminal rather than free COOH-terminal PS-SCL. Also, our data clearly indicate that when using PS-SCL longer than optimal, frame shifts occur frequently and should be taken into account. Biometric analysis of the data obtained with the amidated COOH-terminal nonapeptide library allowed the identification of the native ligand as the sequence with the highest score in a public human protein database. However, the adequacy of the PS-SCL data for the identification for the peptide ligand varied depending on the PS-SCL used. Altogether these results provide insight into the potential of PS-SCL for the identification of CTL-defined tumor-derived antigenic sequences and may significantly implement our ability to interpret the results of these analyses.

Self-Consolidating Concrete—Applications for Slip-Form Paving: Phase II, May 2011

The goal of the project was to develop a new type of self-consolidating concrete (SCC) for slip-form paving to simplify construction an make smoother pavements. Developing the new SCC involved two phases: a feasibility study (Phase I sponsored by TPF-5[098] and concrete admixtures industry) and an in-depth mix proportioning and performance study and field applications (Phase II). The phase I study demonstrated that the new type of SCC needs to possess not only excellent self-consolidating ability before a pavement slab is extruded, but also sufficient “green” strength (the strength of the concrete in a plastic state) after the extrusion. To meet these performance criteria, the new type of SCC mixtures should not be as fluid as conventional SCC but just flowable enough to be self-consolidating. That is, this new type of SCC should be semi-flowable self-consolidating concrete (SFSCC). In the phase II study, effects of different materials and admixtures on rheology, especially the thixotropy, and green strength of fresh SFSCC have been further investigated. The results indicate that SFSCC can be designed to (1) be workable enough for machine placement, (2) be self-consolidating without segregation, (3) hold its shape after extrusion from a paver, and (4) have performance properties (strength and durability) comparable with current pavement concrete. Due to the combined flowability (for self-consolidation) and shape-holding ability (for slip-forming) requirements, SFSCC demands higher cementitious content than conventional pavement concrete. Generally, high cementitious content is associated with high drying shrinkage potential of the concrete. However, well-proportioned and well-constructed SFSCC in a bike path constructed at Ames, IA, has not shown any shrinkage cracks after approximately 3 years of field service. On the other hand, another SFSCC pavement with different mix proportions and construction conditions showed random cracking. The results from the field SFSCC performance monitoring implied that not only the mix proportioning method but also the construction practice is important for producing durable SFSCC pavements. A carbon footprint, energy consumption, and cost analysis conducted in this study have suggested that SFSCC is economically comparable to conventional pavement concrete in fixed-form paving construction, with the benefit of faster, quieter, and easier construction.

Laboratory Performance Evaluation of CIR-Emulsion and it Comparison Against CIR-Form Test Result from Phase II, Final Report TR-578 Phase III, December 2009

Currently, no standard mix design procedure is available for CIR-emulsion in Iowa. The CIR-foam mix design process developed during the previous phase is applied for CIR-emulsion mixtures with varying emulsified asphalt contents. Dynamic modulus test, dynamic creep test, static creep test and raveling test were conducted to evaluate the short- and long-term performance of CIR-emulsion mixtures at various testing temperatures and loading conditions. A potential benefit of this research is a better understanding of CIR-emulsion material properties in comparison with those of CIR-foam material that would allow for the selection of the most appropriate CIR technology and the type and amount of the optimum stabilization material. Dynamic modulus, flow number and flow time of CIR-emulsion mixtures using CSS-h were generally higher than those of HFMS-2p. Flow number and flow time of CIR-emulsion using RAP materials from Story County was higher than those from Clayton County. Flow number and flow time of CIR-emulsion with 0.5% emulsified asphalt was higher than CIR-emulsion with 1.0% or 1.5%. Raveling loss of CIR-emulsion with 1.5% emulsified was significantly less than those with 0.5% and 1.0%. Test results in terms of dynamic modulus, flow number, flow time and raveling loss of CIR-foam mixtures are generally better than those of CIR-emulsion mixtures. Given the limited RAP sources used for this study, it is recommended that the CIR-emulsion mix design procedure should be validated against several RAP sources and emulsion types.

Application of direct-infusion ESI-MS/MS for toxicological screening.

BACKGROUND: Direct-infusion ESI-MS/MS is a powerful approach for the identification of substances in complex mixtures. The aim of this work was to investigate its applicability to the toxicological screening of blood samples. A simple protein precipitation was used, followed by a 15 min infusion of the extract in the mass spectrometer. RESULTS: The application of the procedure to commercial quality controls and authentic post-mortem blood samples demonstrated that the direct-infusion ESI-MS/MS approach enables the simultaneous identification of substances that require different chromatographic conditions. However, poor sensitivity was observed for benzodiazepine, amphetamines and opiate compounds. CONCLUSION: Considering the facile implementation and positive performance of direct-infusion ESI-MS/MS, this approach may to be a valuable complementary technique for systematic toxicological analysis procedures.

Machine learning analysis and modeling of interest rate curves

The present research deals with the review of the analysis and modeling of Swiss franc interest rate curves (IRC) by using unsupervised (SOM, Gaussian Mixtures) and supervised machine (MLP) learning algorithms. IRC are considered as objects embedded into different feature spaces: maturities; maturity-date, parameters of Nelson-Siegel model (NSM). Analysis of NSM parameters and their temporal and clustering structures helps to understand the relevance of model and its potential use for the forecasting. Mapping of IRC in a maturity-date feature space is presented and analyzed for the visualization and forecasting purposes.

Concrete Pavement Mixture Design and Analysis (MDA): Effect of Aggregate Systems on Concrete Properties, TPF-5(205), 2012

For years, specifications have focused on the water to cement ratio (w/cm) and strength of concrete, despite the majority of the volume of a concrete mixture consisting of aggregate. An aggregate distribution of roughly 60% coarse aggregate and 40% fine aggregate, regardless of gradation and availability of aggregates, has been used as the norm for a concrete pavement mixture. Efforts to reduce the costs and improve sustainability of concrete mixtures have pushed owners to pay closer attention to mixtures with a well-graded aggregate particle distribution. In general, workability has many different variables that are independent of gradation, such as paste volume and viscosity, aggregate’s shape, and texture. A better understanding of how the properties of aggregates affect the workability of concrete is needed. The effects of aggregate characteristics on concrete properties, such as ability to be vibrated, strength, and resistivity, were investigated using mixtures in which the paste content and the w/cm were held constant. The results showed the different aggregate proportions, the maximum nominal aggregate sizes, and combinations of different aggregates all had an impact on the performance in the strength, slump, and box test.

Concrete Pavement Mixture Design and Analysis (MDA): Assessment of Air Void System Requirements for Durable Concrete, TPF-5(205), 2012

Concrete will suffer frost damage when saturated and subjected to freezing temperatures. Frost-durable concrete can be produced if a specialized surfactant, also known as an air-entraining admixture (AEA), is added during mixing to stabilize microscopic air voids. Small and well-dispersed air voids are critical to produce frost-resistant concrete. Work completed by Klieger in 1952 found the minimum volume of air required to consistently ensure frost durability in a concrete mixture subjected to rapid freezing and thawing cycles. He suggested that frost durability was provided if 18 percent air was created in the paste. This is the basis of current practice despite the tests being conducted on materials that are no longer available using tests that are different from those in use today. Based on the data presented, it was found that a minimum air content of 3.5 percent in the concrete and 11.0 percent in the paste should yield concrete durable in the ASTM C 666 with modern AEAs and low or no lignosulfonate water reducers (WRs). Limited data suggests that mixtures with a higher dosage of lignosulfonate will need about 1 percent more air in the concrete or 3 percent more air in the paste for the materials and procedures used. A spacing factor of 0.008 in. was still found to be necessary to provide frost durability for the mixtures investigated.

Concrete Pavement Mixture Design and Analysis (MDA): Application of a Portable X-Ray Fluorescence Technique to Assess Concrete Mix Proportions , TPF-5(205), 2012

Any transportation infrastructure system is inherently concerned with durability and performance issues. The proportioning and uniformity control of concrete mixtures are critical factors that directly affect the longevity and performance of the portland cement concrete pavement systems. At present, the only means available to monitor mix proportions of any given batch are to track batch tickets created at the batch plant. However, this does not take into account potential errors in loading materials into storage silos, calibration errors, and addition of water after dispatch. Therefore, there is a need for a rapid, cost-effective, and reliable field test that estimates the proportions of as-delivered concrete mixtures. In addition, performance based specifications will be more easily implemented if there is a way to readily demonstrate whether any given batch is similar to the proportions already accepted based on laboratory performance testing. The goal of the present research project is to investigate the potential use of a portable x-ray fluorescence (XRF) technique to assess the proportions of concrete mixtures as they are delivered. Tests were conducted on the raw materials, paste and mortar samples using a portable XRF device. There is a reasonable correlation between the actual and calculated mix proportions of the paste samples, but data on mortar samples was less reliable.

Effect of two types of biosurfactants on phenanthrene availability to the bacterial bioreporter Burkholderia sartisoli strain RP037.

Biosurfactants are tensio-active agents that have often been proposed as a means to enhance the aqueous solubility of hydrophobic organic contaminants, such as polycyclic aromatic hydrocarbons (PAHs). Biosurfactant-producing bacteria such as those belonging to the genus Pseudomonas might therefore enhance PAH availability to PAH-degrading bacteria. We tested the effects of two types of biosurfactants produced by Pseudomonas sp., cyclic lipopeptides and rhamnolipids, on phenanthrene bioavailability. Bioavailability was judged from growth rates on phenanthrene and from specific induction of a phenanthrene-responsive GFP-reporter in Burkholderia sartisoli strain RP037. Co-culturing of strain RP037 with the lipopeptide-producing bacterium Pseudomonas putida strain PCL1445 enhanced GFP expression compared to a single culture, but this effect was not significantly different when strain RP037 was co-cultivated with a non-lipopeptide-producing mutant of P. putida. The addition of partially purified supernatant extracts from the P. putida lipopeptide producer equally did not unequivocally enhance phenanthrene bioavailability to strain RP037 compared to controls. In contrast, a 0.1% rhamnolipid solution strongly augmented RP037 growth rates on phenanthrene and led to a significantly larger proportion of cells in culture with high GFP expression. Our data therefore suggest that biosurfactant effects may be strongly dependent on the strain and type of biosurfactant.

Ranking of HMA Moisture Sensitivity Tests in Iowa, RB00-012, 2012

Several agencies specify AASHTO T283 as the primary test for field acceptance of moisture susceptibility in hot mix asphalt. When used in this application, logistical difficulties challenge its practicality, while repeatability is routinely scrutinized by contractors. An alternative test is needed which can effectively demonstrate the ability to screen mixtures based on expected performance. The ideal replacement can be validated with field performance, is repeatable, and allows for prompt reporting of results. Dynamic modulus, flow number, AASHTO T283, Hamburg wheel tracking device (HWTD), and the moisture induced sensitivity test (MIST) were performed on plant produced surface mixes in Iowa. Follow-up distress surveys were used to rank the mixes by their performance. The rankings indicate both the quantity of swelling from MIST conditioning and submersed flow number matched the performance ranking of all but one mixture. Hamburg testing parameters also appear effective, namely the stripping inflection point and the ratio between stripping slope and the creep slope. Dynamic modulus testing was ineffective, followed by AASHTO T283 and ratios produced from flow number results of conditioned samples.

Investigation of Warm-Mix Asphalt for Iowa Roadways, TR-635, 2013

Phase II of this study further evaluated the performance of plant-produced warm-mix asphalt (WMA) mixes by conducting additional mixture performance tests at a broader range of temperatures, adding additional pavements to the study, comparing virgin and recovered binder properties, performing pavement condition surveys, and comparing survey data with the Mechanistic Empirical Pavement Design Guide (MEPDG) forecast for pavement damage over 20 years of service life. Further objectives detailing curing behavior, quality assurance testing, and hybrid technologies were as follows: * Compare the predicted and observed field performance of existing WMA trials produced in the previous Phase I study to that of hot-mix asphalt (HMA) control sections to determine if Phase I conclusions are translating to the field; * Identify any curing effect (and timing of the effect) of WMA mixtures and binders in the field; * Determine how the field-compacted mixture properties and recovered binder properties of WMA compare to those of HMA over time for technologies common to Iowa; * Identify the protocols for WMA sample preparation for volumetric and performance testing that best simulate field conditions. The findings of this study indicate that WMA additives do show statistical differences in mixture properties in some of the mixes tested. These differences will not always be statistically different from mixture to mixture. Multiple factors, such as WMA additive type, amount of recycled asphalt material, construction conditions, and mixture variability all play a role in determining the extent of which WMA and HMA mixes differ. Other significant findings of this study include effects of curing, aging in recovered binders from HMA and WMA cores, and the influence of recycled asphalt shingles (RAS) used with WMA. These findings will be of interest to owner agencies and contractors utilizing WMA technologies.