Toxicity of Azadirachta indica to leaf-cutting ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

The leaf-cutting ants are responsible for great economical damages in cultivated areas, and because of this characteristic, they have aroused the interest of researchers around the world. Thus, extracts of neem (Azadirachta indica, A. Juss) were tested through ingestion and contact experiments to investigate their toxicity to Atta sexdens rubropilosa workers. Crude extract of neem seed oil was toxic to the ants by ingestion in all concentrations tested but no toxicity was observed in contact experiments. However, crude extract of neem seed paste produced a significant toxicity to workers by ingestion and by contact.

Bionomics and identification of Acromyrmex (Hymenoptera: Formicidae) through an illustrated key

This study is based on sampled data obtained in 60 equally distant municipalities of São Paulo State. In this study, we proposed a tool to identify Acromyrmex species in a practical and agile manner through the use of an illustrated key that demonstrates the morphological attributes of workers, associated with the type of cut plant material, external and internal appearance of nests and nidification sites. Through sampling, eleven species and six subspecies of Acromyrmex occurring in the State were identified, including the first registers of A. diasi and A. subterraneus molestans.

Electrophysiological responses of Atta sexdens rubropilosa workers to essential oils of Eucalyptus and its chemical composition

The leaf-cutting ant Atta sexdens rubropilosa Forel, 1908 is the most harmful of the Eucalyptus pests, causing severe losses in wood production through defoliation. Various strategies have been tried and effort spent on the development of methods to control this pest, however no practical and environmentally acceptable one currently exists. In this work the chemical composition of the essential oil of seven Eucalyptus species was identified and the selectivity and sensitivity of antennal receptors of A. sexdens rubropilosa workers to the volatile compounds were determined using the electroantennographic technique (EAG and GC-EAD). Analysis by GC-EAD showed in E. cloesiana and E. maculata, respectively, seventeen and sixteen terpenes that elicited responses in ant workers' antennae, indicating the potential role of the essential oils as allelochemicals that determine the choice of the foraging material. © 2006 Verlag der Zeitschrift für Naturforschung.

Brood care and male behavior in queenless Acromyrmex subterraneus brunneus (Hymenoptera: Formicidae) colonies under laboratory conditions

In this study we describe and quantify the brood care performed by workers in queenless colonies of the leaf-cutting ant Acromyrmex subterraneus brunneus. Fifteen behavioral acts were recorded in the three colonies studied. The behavioral repertoire of males was more limited, with only four behavioral acts being observed: feeding through workers, collecting staphylae and self-feeding, mutual grooming between adults (worker-males), and self-grooming. Males were also found to be able to collect food (staphylae or fungal hyphae) from the fungus garden and to feed themselves, not requiring workers for this activity. This study contributes to a better understanding of the basic biology of leaf-cutting ant colonies, with the description and quantification of the activities performed by the members of a colony in a situation of the loss of the fertile caste.

Scanning electron microscopic and profilometric study of different sharpening stones

Scaling and root planing contribute to the recovery of periodontal health. All periodontal instruments loose their fine cutting angle after use. To maintain this angle, correct sharpening is required using specifically designed stones. The characteristics of sharpening stones can be compared to the blade of the instruments and also transported to root surface during instrumentation. Root smoothness is related to the quality of the blade. Therefore, the purpose of this study was to evaluate the characteristics of 9 sharpening stones by scanning electron microscopic and profilometric analyses. Ceramic and Neumar stones were very fine and both may be recommended to maintain the sharpness of the instruments. Arkansas, Thompson and CE stones presented greater roughness with very regular and round particles, and are suitable for maintenance of the cutting angle. In addition, these stones may be indicated for the routine sharpening of the instruments that are partly dull. Oxide Aluminum, Carborundum and JON stones were the coarsest with large irregular particles and may be indicated for initial sharpening of totally dull instruments with completion of sharpening with finer stones.

Influence of the tool edge geometry on specific cutting energy at high-speed cutting

This paper presents specific cutting energy measurements as a function of the cutting speed and tool cutting edge geometry. The experimental work was carried out on a vertical CNC machining center with 7,500 rpm spindle rotation and 7.5 kW power. Hardened steels ASTM H13 (50 HRC) were machined at conventional cutting speed and high-speed cutting (HSC). TiN coated carbides with seven different geometries of chip breaker were applied on dry tests. A special milling tool holder with only one cutting edge was developed and the machining forces needed to calculate the specific cutting energy were recorded using a piezoelectric 4-component dynamometer. Workpiece roughness and chip formation process were also evaluated. The results showed that the specific cutting energy decreased 15.5% when cutting speed was increased up to 700%. An increase of 1 °in tool chip breaker chamfer angle lead to a reduction in the specific cutting energy about 13.7% and 28.6% when machining at HSC and conventional cutting speed respectively. Furthermore the workpiece roughness values evaluated in all test conditions were very low, closer to those of typical grinding operations (∼0.20 μm). Probable adiabatic shear occurred on chip segmentation at HSC Copyright © 2007 by ABCM.

Scanning electron microscope assessment of several resharpening techniques on the cutting edges of gracey curettes

Aim: Treatment of periodontal diseases is based on efficient scaling and root planing (SRP) and adequate maintenance of the patient. The effectiveness of SRP is influenced by operator skill, access to the subgingival area, root anatomy, and the quality and type of instrument used for SRP. The aim of this study was to evaluate the cutting edges of Gracey curettes after manufacturing and after resharpening using several techniques. Methods and Material: The cutting edges of a total of 41 new #5-6 stainless steel Gracey curettes were evaluated blindly using scanning electron microscopy (SEM). The quality of the cutting edges was evaluated blindly by a calibrated examiner using micrographs. Data were analyzed using a Kruskal Wallis test and nonparametric two-way multiple comparisons. Results and Conclusions: Different sharpening techniques had significantly different effects on the sharpeness of cutting edges (p<0.05). Sharpening by passing the lateral face of curettes over a sharpening stone and then a #299 Arkansas stone produced a high frequency of smooth, sharp edges or slightly irregular edges between the lateral and coronal faces of the curettes. Sharpening by passing a blunt stone over the curette's lateral face produced the poorest quality cutting edge (a bevel). Sharpening of the coronal curette face produced extremely irregular cutting edges and non-functional wire edges. Sharpening with rotary devices produced extremely irregular cutting edges.

Description and morphometry of the sting apparatus in the three worker casts of Acromyrmex subterraneus brunneus (Formicidae, Attini)

We studied the morphometry of the sting apparatus of Acromyrmex subterraneus brunneus workers by dissection and mounting of the structures on slides, and present here a brief description and illustrations. Sting apparatus examinations showed differences in size, but without morphological differences. The seven morphometric variables studied permitted grouping of the Ac. subterraneus brunneus workers into the following three groups: cluster 1 - consisting of 85, 39 large, 45 medium and 1 small workers; cluster 2 - consisting of 44 small workers, and cluster 3 - consisting of 6 large workers. This study demonstrated that all worker castes follow the same morphological pattern, although functional characteristics of the sting apparatus should be highlighted.

Dispersal of the delayed action insecticide sulfluramid in colonies of the leaf-cutting ant Atta sexdens rubropilosa (Hymenoptera: Formicidae)

Toxic baits are the most used control method for leaf-cutting ants due to their high effectiveness and because they are considered the safest for humans. Taking into account that the importance of leaf-cutting ants as pests, knowing the process by which dispersal and worker contamination is achieved becomes essential to understand several aspects about the functioning of a bait-borne AI (active ingredient) used in toxic baits. It has been established that an effective toxic bait should have a delayed- action AI, but its dispersion among the different sizes of workers is unknown. Workers of different sizes are involved in quite different tasks such foraging, cultivation of symbiotic macrofungus or control of deleterious microfungi. Therefore, we prepared a toxic bait containing the delayed-action AI sulfluramid and a dye (Rhodamine B) as an AI tracer in order to study dispersal and contamination in colonies, evaluated at different periods and in relation to different workers' sizes. Both field and laboratory colonies were evaluated. The great level of contamination, about 50% at 24 hours, in all sizes of workers demonstrates that worker contact with toxic bait is intense within this period. The distribution in field and laboratory colonies was similar. This contamination pattern is probably enough to cause the colony to die because of contamination of smaller workers, leading to the loss of control of the aggressive microfungi, which can quickly overgrow the symbiotic fungus culture. The dispersal dynamics of AI in leaf-cutting ant workers is important for investigations on the mode of action of this insecticide in the colony, and as a reference in future studies, such as those attempting to reduce the concentration of AIs in baits to reduce their environmental impact, or for facilitation of new AI screening.

Isolation and growth of the symbiotic fungus of Atta capiguara (Hymenoptera: Formicidae)

This work's objectives were to isolate and evaluate the growth of the symbiotic fungus of Atta capiguara Gonçalves on artificial medium, under different pH and temperature conditions. Isolation was accomplished using the following media: Sabouraud, oat-agar, PDA, and PDA with the addition of extracts from the grasses Paspalum sp. Flügge and Hyparrhenia rufa (Nees) Stapf.. The medium used in the growth study was PDA with the addition of a Paspalum sp. (0.22%, w/v) extract at initial pH values of 4.5, 6.0, and 7.5. Mycelium disks were transferred to plates containing the culture medium. The plates were maintained at temperatures of 20, 23, and 26 ± 1°C. Mycelial radial growth evaluations were performed at 7, 14, 21, 28, and 35 days of incubation. Fungus isolation was obtained in all media studied. The highest radial means were obtained at initial pH values of 6.0 and 7.5 and temperatures of 23 and 26± 1°C. Greater plot losses occurred at the initial pH condition of 7.5. In general, A. capiguara fungi can be grown in the medium studied, at an initial pH of 6.0 and temperatures of 23 or 26± 1°C. Radial growth evaluations at 14 and 28 days of incubation can be recommended for substrate studies involving the symbiotic fungus.

Microdon tigrinus (Diptera, Syrphidae): Populational fluctuations and specificity to the nest of Acromyrmex coronatus (Hymenoptera: Formicidae)

This study was performed in the southern and southeastern regions of Brazil, visiting numerous municipalities, over a period of 25 years, excavating nests of 12 species of leaf-cutting ants of the Acromyrmex genus. Larvae and pupae of Microdon tigrinus were found only in nests of the leaf-cutting ant Acromyrmex coronatus, indicating high specificity. Observation showed that larvae and pupae were well accepted in the nests and the adults, immediately after puparia eclosion and prior to wing distension, were not attacked by the workers, suggesting that they produce semiochemicals for a short time period until they arrive outside the Acromyrmex coronatus nest. It was postulated that these larvae feed on the organic detritus of the nest, as shown for Microdon larvae of other species.

Comparison of the biological behavior of wollastonite bioceramics prepared from synthetic and natural precursors

Wollastonite bioceramics prepared from synthetic and natural precursors were implanted in rats in bone and subcutaneous tissues. The implant sites were excised after 7, 30 and 120 days, fixed, dehydrated, embedded in paraffin wax for serial cutting and examined under transmitted light microscope. It was found a very similar behavior for both wollastonite bioceramics. They were biocompatible, bioactive and biodegradable when implanted in rat bone. The synthetic ceramic was more reabsorbable than the one from natural powder. When implanted in subcutaneous rat tissue, both materials elicited a mild initial inflammatory reaction that practically disappeared after 120 days. Both materials were encapsulated with a very thin fibrous capsule and slightly reabsorbed at their surfaces. None of the materials induced ectopic osteogenesis. According to the results, the studied materials seem to be able for manufacturing reabsorbable bone implants.

α-SiAION: Development and machining test on gray cast iron

The α-SiAlON ceramic cutting tool insert is developed. Silicon nitride and additives powders are pressed and sintered in the form of cutting tool inserts at temperature of 1900 °C. The physics and mechanical properties of the inserts like green density, weight loss, relative density, hardness and fracture toughness are evaluated. Machining studies are conducted on grey cast iron workpiece to evaluate the performance of α-SiAlON ceramic cutting tool. In the paper the cutting tool used in higher speed showed an improvement in the tribological interaction between the cutting tools and the grey cast iron workpiece resulted in a significant reduction of flank wear and roughness, because of better accommodation and the presence of the graphite in gray cast iron. The above results are discussed in terms of their affect at machining parameters on gray cast iron.

Study of cutting forces on machinability properties of gray cast iron using new ceramics cutting tools

During gray cast iron cutting, the great rate of mechanical energy from cutting forces is converted into heat. Considerable heat is generated, principally in three areas: the shear zone, rake face and at the clearance side of the cutting edge. Excessive heat will cause undesirable high temperature in the tool which leads to softening of the tool and its accelerated wear and breakage. Nowadays the advanced ceramics are widely used in cutting tools. In this paper a composition special of Si3N4 was sintering, characterized, cut and ground to make SNGN120408 and applyed in machining gray cast iron with hardness equal 205 HB in dry cutting conditions by using digital controlled computer lathe. The tool performance was analysed in function of cutting forces, flank wear, temperature and roughness. Therefore metal removing process is carried out for three different cutting speeds (300 m/min, 600 m/min, and 800 m/min), while a cutting depth of 1 mm and a feed rate of 0.33 mm/rev are kept constant. As a result of the experiments, the lowest main cutting force, which depends on cutting speed, is obtained as 264 N at 600 m/min while the highest main cutting force is recorded as 294 N at 300 m/min.

Properties advanced of the silicon nitride based ceramics and recent performance on automotive parts manufacture by machining process: Advanced Ceramics, demand Forecast

Automotive parts manufacture by machining process using silicon nitride-based ceramic tool development in Brazil already is a reality. Si 3N4-based ceramic cutting tools offer a high productivity due to their excellent hot hardness, which allows high cutting speeds. Under such conditions the cutting tool must be resistant to a combination of mechanical, thermal and chemical attacks. Silicon nitride based ceramic materials constitute a mature technology with a very broad base of current and potential applications. The best opportunities for Si3N 4-based ceramics include ballistic armor, composite automotive brakes, diesel particulate filters, joint replacement products and others. The goal of this work was to show latter advance in silicon nitride manufacture and its recent evolution on machining process of gray cast iron, compacted graphite iron and Ti-6Al-4V. Materials characterization and machining tests were analyzed by X-Ray Diffraction, Scanning Electron Microscopy, Vickers hardness and toughness fracture and technical norm. In recent works the authors has been proved to advance in microstructural, mechanical and physic properties control. These facts prove that silicon nitride-based ceramic has enough resistance to withstand the impacts inherent to the machining of gray cast iron (CI), compacted graphite iron (CGI) and Ti-6Al-4V (6-4). Copyright © 2008 SAE International.