993 resultados para Oxide ceramic layers
Resumo:
Due to the adverse effects of the cholesterol oxidation products for the human health, the search of the occurrence and the quantification of these compounds in foods are considered of great importance. In this paper the effect of grilling in hake and sardine on cholesterol oxides formation and fatty acids alterations was investigated. The main fatty acids determined in both fishes were docosahexaenoic (DHA), oleic, eicosapentaenoic (EPA) and palmitoleic. The total lipids, fatty acids and cholesterol contents were decreased significantly (p < 0.02) after thermal treatment, with simultaneous increase of the cholesterol oxides contents. The cholesterol oxides determined in both species in the present study were: 19-hydroxycholesterol, 24(S)-hydroxycholesterol, 22(S) hydroxycholesterol, 25-hydroxycholesterol, 25(R)-hydroxycholesterol and 7-ketocolesterol. Besides the presence of the cholesterol oxides in raw fishes, there were a greater number of products resulting from the oxidation of cholesterol side chain, a fact rarely observed in foods.
Voimalaitosten kattilaputkien sisäpuolisten kerrostumien paksuuden mittaaminen ultraäänimenetelmällä
Resumo:
Höyryvoimalaitoksen käyttöönotossa muodostuu kattilaputkien sisäpinnoille niitä korroosiolta suojaava ohut metallioksidikerros. Tämän kerroksen päälle kasvaa kattilan käytön aikana haitallista kerrostumaa paikallisen korroosion tai kattilavedessä olevien epäpuhtauksien kerääntymisen tai kiteytymisen seurauksena. Kerrostuma haittaa lämmönsiirtoa tulipesästä putkiseinämän läpi kattilaveteen. Putkien lämpötilan nousu suunniteltua korkeammaksi kasvattaa putkivaurioiden ja sisäpuolisen korroosion riskiä. Tästä johtuen paksuksi kasvaneet kerrostumat pyritään poistamaan happokäsittelyllä eli peittauksella ennen vaurioiden syntyä. Perinteisesti kerrostumapaksuus on määritetty kattilasta irrotetuista näyteputkista mikroskoopilla. Työn tavoitteena oli tutkia uudenlaisen ultraäänimittauksen teoriaa ja selvittää sen toimivuus höyrystinputkien kerrostumapaksuusmittauksissa. Lisäksi tavoitteena oli tutkia voimalaitoksen höyrystimen sisäpuolisten kerrostumien muodostumista ja niiden vaikutuksia sekä kattilan peittaustarpeen arviointia. Höyrystimen kerrostumien kasvunopeuteen vaikuttavat eniten voimalaitostyyppi, käytetty vesikemia ja kattilaveteen kulkeutuvien epäpuhtauksien määrä. Kasvunopeus vaihtelee laitosten välillä suuresti ja eroaa myös tulipesän eri kohdissa. Kattilaveden epäpuhtauspitoisuus ja kerrostumapaksuus vaikuttavat molemmat korroosiovaurioiden todennäköisyyteen. Peittauspaksuuden ohjearvoissa tulisi huomioida kattilan käyttöpaine, kattilatyyppi ja riski kattilaveden laadun heikkenemiselle. Putkinäytteistä ja laitoksilla suoritettujen mittauksien perusteella uusi ultraäänitekniikka tuottaa luotettavia tuloksia tavanomaisten kerrostumien mittauksessa. Vain yhdellä laitoksella esiintyi irtonaisen sakan kaltaista kerrostumaa, jota mittaus ei kyennyt havaitsemaan. Mittaustulokset kerrostumista tulipesän eri osissa antavat hyvän perustan peittaustarpeen arviointiin.
Resumo:
For advanced devices in the application fields of data storage, solar cell and biosensing, one of the major challenges to achieve high efficiency is the fabrication of nanopatterned metal oxide surfaces. Such surfaces often require both precise structure at the nanometer scale and controllable patterned structure at the macro scale. Nowadays, the dominating candidates to fabricate nanopatterned surfaces are the lithographic technique and block-copolymer masks, most of which are unfortunately costly and inefficient. An alternative bottom-up approach, which involves organic/inorganic self-assembly and dip-coating deposition, has been studied intensively in recent years and has proven to be an effective technique for the fabrication of nanoperforated metal oxide thin films. The overall objective of this work was to optimize the synthesis conditions of nanoperforated TiO2 (NP-TiO2) thin films, especially to be compatible with mixed metal oxide systems. Another goal was to develop fabrication and processing of NP-TiO2 thin films towards largescale production and seek new applications for solar cells and biosensing. Besides the traditional dip-coating and drop-casting methods, inkjet printing was used to prepare thin films of metal oxides, with the advantage of depositing the ink onto target areas, further enabling cost-effective fabrication of micro-patterned nanoperforated metal oxide thin films. The films were characterized by water contact angle determination, Atomic Force Microscopy, Scanning Electron Microscopy, X-ray Photoelectron Spectroscopy and Grazing Incidence XRay Diffraction. In this study, well-ordered zinc titanate nanoperforated thin films with different Zn/Ti ratios were produced successfully with zinc precursor content up to 50 mol%, and the dominating phase was Zn2Ti3O8. NP-TiO2 structures were also obtained by a cost-efficient means, namely inkjet printing, at both ambient temperature and 60 °C. To further explore new biosensing applications of nanoperforated oxide thin films, inkjet printing was used for the fabrication of both continuous and patterned polymeric films onto NP-TiO2 and perfluorinated phosphate functionalized NP-TiO2 substrates, respectively. The NP-TiO2 films can be also functionalized with a fluoroalkylsilane, resulting in hydrophobic surfaces on both titania and silica. The surface energy contrast in the nanoperforations can be tuned by irradiating the films with UV light, which provides ideal model systems for wettability studies.
Resumo:
Hydrogen (H2) fuel cells have been considered a promising renewable energy source. The recent growth of H2 economy has required highly sensitive, micro-sized and cost-effective H2 sensor for monitoring concentrations and alerting to leakages due to the flammability and explosiveness of H2 Titanium dioxide (TiO2) made by electrochemical anodic oxidation has shown great potential as a H2 sensing material. The aim of this thesis is to develop highly sensitive H2 sensor using anodized TiO2. The sensor enables mass production and integration with microelectronics by preparing the oxide layer on suitable substrate. Morphology, elemental composition, crystal phase, electrical properties and H2 sensing properties of TiO2 nanostructures prepared on Ti foil, Si and SiO2/Si substrates were characterized. Initially, vertically oriented TiO2 nanotubes as the sensing material were obtained by anodizing Ti foil. The morphological properties of tubes could be tailored by varying the applied voltages of the anodization. The transparent oxide layer creates an interference color phenomena with white light illumination on the oxide surface. This coloration effect can be used to predict the morphological properties of the TiO2 nanostructures. The crystal phase transition from amorphous to anatase or rutile, or the mixture of anatase and rutile was observed with varying heat treatment temperatures. However, the H2 sensing properties of TiO2 nanotubes at room temperature were insufficient. H2 sensors using TiO2 nanostructures formed on Si and SiO2/Si substrates were demonstrated. In both cases, a Ti layer deposited on the substrates by a DC magnetron sputtering method was successfully anodized. A mesoporous TiO2 layer obtained on Si by anodization in an aqueous electrolyte at 5°C showed diode behavior, which was influenced by the work function difference of Pt metal electrodes and the oxide layer. The sensor enabled the detection of H2 (20-1000 ppm) at low operating temperatures (50–140°C) in ambient air. A Pd decorated tubular TiO2 layer was prepared on metal electrodes patterned SiO2/Si wafer by anodization in an organic electrolyte at 5°C. The sensor showed significantly enhanced H2 sensing properties, and detected hydrogen in the range of a few ppm with fast response/recovery time. The metal electrodes placed under the oxide layer also enhanced the mechanical tolerance of the sensor. The concept of TiO2 nanostructures on alternative substrates could be a prospect for microelectronic applications and mass production of gas sensors. The gas sensor properties can be further improved by modifying material morphologies and decorating it with catalytic materials.
Resumo:
In this work, the magnetic field penetration depth for high-Tc cuprate superconductors is calculated using a recent Interlayer Pair Tunneling (ILPT) model proposed by Chakravarty, Sudb0, Anderson, and Strong [1] to explain high temperature superconductivity. This model involves a "hopping" of Cooper pairs between layers of the unit cell which acts to amplify the pairing mechanism within the planes themselves. Recent work has shown that this model can account reasonably well for the isotope effect and the dependence of Tc on nonmagnetic in-plane impurities [2] , as well as the Knight shift curves [3] and the presence of a magnetic peak in the neutron scattering intensity [4]. In the latter case, Yin et al. emphasize that the pair tunneling must be the dominant pairing mechanism in the high-Tc cuprates in order to capture the features found in experiments. The goal of this work is to determine whether or not the ILPT model can account for the experimental observations of the magnetic field penetration depth in YBa2Cu307_a7. Calculations are performed in the weak and strong coupling limits, and the efi"ects of both small and large strengths of interlayer pair tunneling are investigated. Furthermore, as a follow up to the penetration depth calculations, both the neutron scattering intensity and the Knight shift are calculated within the ILPT formalism. The aim is to determine if the ILPT model can yield results consistent with experiments performed for these properties. The results for all three thermodynamic properties considered are not consistent with the notion that the interlayer pair tunneling must be the dominate pairing mechanism in these high-Tc cuprate superconductors. Instead, it is found that reasonable agreement with experiments is obtained for small strengths of pair tunneling, and that large pair tunneling yields results which do not resemble those of the experiments.
Resumo:
Perovskite type piezoelectric and manganese oxide materials have gained a lot of attention in the field of device engineering. Lead zirconium titananium oxide (PbZri.iTiiOa or PZT) is a piezoelectric material widely used as sensors and actuators. Miniaturization of PZTbased devices will not only perfect many existing products, but also opens doors to new applications. Lanthanum manganese oxides Lai-iAiMnOa (A-divalent alkaline earth such as Sr, Ca or Ba) have been intensively studied for their colossal magnetoresistance (CMR) properties that make them applicable in memory cells, magnetic and pressure sensors. In this study, we fabricate PZT and LSMO(LCMO) heterostructures on SrTiOa substrates and investigate their temperature dependency of resistivity and magnetization as a function of the thickness of LSMO(LCMO) layer. The microstructure of the samples is analysed through TEM. In another set of samples, we study the effect of application of an electric field across the PZT layer that acts as an external pressure on the manganite layer. This verifies the correlation of lattice distortion with transport and magnetic properties of the CMR materials.
Resumo:
The capability of molecular mechanics for modeling the wide distribution of bond angles and bond lengths characteristic of coordination complexes was investigatecl. This was the preliminary step for future modeling of solvent extraction. Several tin-phosphine oxide COrnI)le:){es were selected as the test groUl) for t.he d,esired range of geometry they eX!libi ted as \-vell as the ligands they cOD.tained r Wllich were c\f interest in connection with solvation. A variety of adjustments were made to Allinger's M:M2 force·-field ill order to inl.prove its performance in the treatment of these systems. A set of u,nique force constants was introduced for' those terms representing the metal ligand bond lengths, bond angles, and, torsion angles. These were significantly smaller than trad.itionallY used. with organic compounds. The ~1orse poteIlt.ial energ'Y function was incorporated for the M-X l')ond lE~ngths and the cosine harmonic potential erlerg-y function was invoked for the MOP bond angle. These functions were found to accomodate the wide distribution of observed values better than the traditional harmonic approximations~ Crystal packing influences on the MOP angle were explored thr"ollgh ttle inclusion of the isolated molecule withil1 a shell cc)ntaini11g tl1e nearest neigl1'bors duri.rlg energy rninimization experiments~ This was found to further improve the fit of the MOP angle.
Resumo:
Molecular mechanics calculations were done on tetrahedral phosphine oxide zinc complexes in simulated water, benzene and hexane phases using the DREIDING II force field in the BIOGRAF molecular modeling program. The SUN workstation computer (SUN_ 4c, with SPARK station 1 processor) was used for the calculations. Experimental structural information used in the parameterization was obtained from the September 1989 version of the Cambridge Structural Database. 2 Steric and solvation energies were calculated for complexes of the type ZnCl2 (RlO)2' The calculations were done with and without inclusion of electrostatic interactions. More reliable simulation results were obtained without inclusion of charges. In the simulated gas phase, the steric energies increase regularly with number of carbons in the alkyl group, whereas they go through a maximum when solvent shells are included in the calculation. Simulated distribution ratios vary with chain length and type of chain branching and the complexes are found to be more favourable for extraction by benzene than by hexane, in accord with experimental data. Also, in line with what would be expected for a favorable extraction, calculations without electrostatics predict that the complexes are better solvated by the organic solvents than by water.
Resumo:
The phosphonium salt room temperature ionic liquid tetradecyltrihexylphosphonium chloride (THPC) has been employed as an efficient reusable media for the palladium catalyzed Suzuki cross-coupling reaction of aryl halides, including aryl chlorides, under mild conditions. The cross-coupling reactions were found to proceed in THPC containing small amounts ofwater and toluene (single phase) using potassium phosphate and 1% Pd2(dba)3'CHCI3. Variously substituted iodobenzenes, including electron rich derivatives, reacted efficiently in THPC with a variety of arylboronic acids and were all complete within 1 hour at 50°C. The corresponding aryl bromides also reacted under these conditions with the addition of a catalytic amount of triphenylphosphine that allowed for complete conversion and high isolated yields. The reactions involving aryl chlorides were considerably slower, although the addition of triphenylphosphine and heating at 70°C allowed high conversion of electron deficient derivatives. Addition of water and hexane to the reaction products results in a triphasic system, from which the catalyst was then recycled by removing the top (hexanes) and bottom (aqueous) layers and adding the reagents to the ionic liquid which was heated again at 50°C; resulting in complete turnover of iodobenzene. Repetition of this procedure gave the biphenyl product in 82-97% yield (repeated five times) for both the initial and recycled reaction sequences. IL ESTERIFICATIONREACTION A new class oftrialkylphosphorane has been prepared through reaction of a trialkylphosphine with 2-chlorodimethylmalonate in the presence oftriethylamine. These new reagents promote the condensation reaction of carboxylic acids with alcohols to provide esters along with trialkylphosphine oxide and dimethylmalonate. The condensation reaction of chiral secondary alcohols can be controlled to give either high levels of inversion or retention through a subtle interplay involving basicity of the reaction media, solvent, and tuning the electronic and steric nature of the carboxylic acid and stenc nature of the phosphorane employed. A coherent mechanism is postulated to explain these observations involving reaction via an initial acyloxyphosphonium ion.
Resumo:
Lead chromium oxide is a photoconductive dielectric material tha t has great potential of being used as a room temperature photodetector. In this research, we made ceramic pellets of this compound as well as potassium doped compound Pb2-xKxCr05, where x=O, 0.05, 0.125. We also investigate the properties of the lanthanum doped sample whose chemical formula is Pb1.85Lao.15Cr05' The electronic, magnetic and thermal properties of these materials have been studied. Magnetization measurements of the Pb2Cr05 sample indicate a transition at about 310 K, while for the lanthanum doped sample the transition temperature is at about 295 K indicating a paramagnetic behavior. However, the potassium doped samples are showing the transition from paramagnetic state to diamagnetic state at different temperatures for different amounts of potassium atoms present in the sample. We have studied resistivity as a function of temperature in different gas environments from 300 K to 900 K. The resistivity measurement of the parent sample indicates a conducting to insulating transition at about 300 K and upon increasing the temperature further, above 450 K the sample becomes an ionic conductor. As temperature increases a decrease in resistance is observed in the lanthanum/potassium doped samples. Using Differential Scanning Calorimetry experiment an endothermic peak is observed for the Pb2Cr05 and lanthanum/potassium doped samples at about 285 K.
Resumo:
Affiliation: Florina Moldovan: Faculté de médecine dentaire, Université de Montréal & CHU Hôpital Sainte-Justine, Université de Montréal. Christina Alexandra Manacu, Marjolaine Roy-Beaudry, Fazool Shipkolye : CHU Hôpital Sainte-Justine, Université de Montréal. Johanne Martel-Pelletier & Jean-Pierre Pelletier : CHUM Hôpital Notre-Dame, Université de Montréal.
Resumo:
L’endothéline-1 (ET-1) est un peptide vasoactif extrêmement puissant qui possède une forte activité mitogénique dans les cellules du muscle lisse vasculaire (VSMCs). Il a été démontré que l’ET-1 est impliquée dans plusieurs maladies cardio-vasculaires, comme l’athérosclérose, l'hypertension, la resténose après l'angioplastie, l’insuffisance cardiaque et l'arythmie. L’ET-1 exerce ses effets via plusieurs voies de signalisation qui incluent le Ca2+, les protéines kinases activées par les mitogènes (MAPKs) y compris les kinases régulées par les signaux extracellulaires (ERK1/2) et la voie de la phosphatidylinositol 3-kinase (PI-3K)/protein kinase B (PKB). Plusieurs études ont démontré que les dérivés réactifs de l'oxygène (ROS) peuvent jouer un rôle important dans la signalisation d’ERK1/2 et de PKB induite par plusieurs facteurs de croissance et hormones. Nous avons précédemment montré que l'ET-1 produit des ROS qui agissent comme médiateur de la signalisation cellulaire induite par l’ET-1. Le peroxyde d’hydrogène (H2O2), une molécule qui appartient à la famille des ROS, peut activer les voies de la MAPK et de la PKB dans les VSMCs. Par ailleurs, nos résultats suggèrent également que le Ca2+ et la calmoduline (CaM) sont essentiels pour la phosphorylation d’ERK1/2, de p38 et de PKB induite par le H2O2 dans les VSMCs. La Ca2+/CaM-dependent protein kinases II (CaMKII) est une sérine/thréonine protéine kinase multifonctionnelle activée par le Ca2+/CaM. Il a été montré que la CaMKII est impliquée dans les voies de signalisation induite par le H2O2 dans les cellules endothéliales. Cependant, le rôle de la CaMKII dans la phosphorylation d’ERK1/2, de PKB et de la proline-rich tyrosine kinase 2 (Pyk2) induite par l’ET-1 et le H2O2, de même que son rôle dans l’effet hypertrophique et prolifératif de l’ET-1 dans les VSMCs demeure inexploré. Le monoxyde d’azote (NO) est une molécule vasoactive impliquée dans la régulation de plusieurs réponses hormonales. Le NO peut moduler la signalisation contrôlant la croissance cellulaire induite par plusieurs agonistes d’où son rôle protecteur dans le système vasculaire. Des études ont montré que le NO peut inhiber la voie de Ras/Raf/ERK1/2 et la voie de PKB induite par le facteur de croissance endothélial (EGF) et l’angiotensine II (Ang II). Beaucoup d’autres travaux ont mis en évidence un cross-talk entre les voies de signalisation activées par l’ET-1 et le NO. La capacité du NO à inhiber la signalisation intracellulaire induite par l’ET-1 dans les VSMCs demeure inconnue. Le travail présenté dans cette thèse vise à déterminer le rôle du système Ca2+-CaM-CaMKII dans la phosphorylation d’ERK1/2, de PKB et de Pyk2 induite par l’ET-1 et le H2O2 ainsi que son rôle dans la croissance et la prolifération cellulaire induites par l’ET-1 dans les VSMCs. Nous avons également testé le rôle du NO dans la phosphorylation d’ERK1/2, de PKB et de Pyk2 ainsi que la synthèse protéique induite par l’ET-1. Dans la première partie de notre étude, nous avons examiné le rôle de la CaMKII dans la phosphorylation d’ERK1/2 et de PKB induite par l’ET-1 dans les VSMCs en utilisant trois approches différentes i.e. l'usage d'inhibiteurs pharmacologiques, un peptide auto-inhibiteur de la CaMKII (CaMKII AIP) et la technique de siRNA. Nous avons démontré que la CaMKII est impliquée dans la phosphorylation d’ERK1/2 et de PKB induite par l’ET-1 dans les VSMCs. Des études précédentes ont montré à l’aide d’inhibiteurs pharmacologiques comme le KN-93 que l'Ang II et les agents induisant une augmentation de la concentration en Ca2+ intracellulaire comme l’ionomycine, provoquent la phosphorylation d’ERK1/2 via la CaM dans les VSMCs. Cependant, en utilisant différentes approches, nos études ont montré pour la première fois une implication de la CaMKII dans la phosphorylation d’ERK1/2 et de PKB induite par l’ET-1 dans les VSMCs. Nous avons également rapporté pour la première fois, un rôle crucial de la CaMKII dans la pathophysiologie vasculaire associée à l’ET-1 puisque l’activation de la CaMKII joue un rôle important dans l’hypertrophie et la croissance cellulaire. Dans la deuxième partie, à la lumière des études précédentes qui montraient que les ROS agissent comme médiateurs de la signalisation induite par l’ET-1 dans les VSMCs, nous avons examiné si la CaMKII est également impliquée dans l’activation des voies d’ERK1/2 et de PKB induite par le H2O2. En utilisant des approches pharmacologiques et moléculaires, nous avons montré, comme pour l’ET-1, que la CaMKII joue un rôle critique en amont de la phosphorylation d’ERK1/2, de PKB et de Pyk2 induite par le H2O2. Nous avons précédemment montré que la transactivation du récepteur de type I de l’insulin-like growth factor (IGF-1R) est nécessaire à l’activation de PKB induite par le H2O2. Pour cette raison, nous avons examiné l'effet de l'inhibition de la CaMKII par l’inhibiteur pharmacologique ou par le knock-down de la CaMKII sur la phosphorylation d’IGF-1R induite par le H2O2. Les résultats démontrent que la CaMKII joue un rôle critique en amont de la phosphorylation d’ERK1/2, de PKB et d’IGF-1R induite par le H2O2. Dans la troisième partie de notre étude, nous avons également examiné le mécanisme moléculaire par lequel le NO exerce ses effets anti-mitogéniques et anti-hypertrophiques dans la signalisation induite par l’ET-1. En testant l'effet de deux différents donneurs de NO (S-nitroso-N-acetylpenicillamine (SNAP), sodium nitroprusside (SNP)) et un inhibiteur de NO synthase, le N (G)-nitro-L-arginine methyl ester (L-NAME) dans la phosphorylation d’ERK1/2, de PKB et de Pyk2 induite par l’ET-1, nous avons observé que le NO a un effet inhibiteur sur la signalisation induite par l’ET-1 dans les VSMCs. Par ailleurs, le 8-Br-GMPc, un analogue du GMPc, a un effet similaire à celui des deux donneurs du NO, tandis que l’oxadiazole quinoxaline (ODQ), un inhibiteur de la guanylate cyclase soluble, inverse l'effet inhibiteur du NO. Nous concluons que le NO diminue la phosphorylation d’ERK1/2, de PKB et de Pyk2 induite par l’ET-1 d’une manière dépendante du GMPc. Le NO inhibe aussi les effets hypertrophiques de l’ET-1 puisque le traitement avec le SNAP diminue la synthèse des protéines induite par l’ET-1. En résumé, les études présentées dans cette thèse démontrent que l’ET-1 et le H2O2 sont des activateurs de la phosphorylation d’ERK1/2, de PKB et de Pyk2 dans les VSMCs et que la CaMKII s’avère nécessaire pour ce processus, en agissant en amont de l’activation de IGF-1R induite par le H2O2 dans les VSMCs. Elles montrent également que le NO inhibe la phosphorylation d’ERK1/2, de PKB et de Pyk2 induite par l’ET-1. Enfin, nos travaux suggèrent aussi que l’activation de la CaMKII stimule la synthèse des protéines et de l’ADN induites par l’ET-1 alors que le NO inhibe la synthèse des protéines induite par ET-1. Mots clés: Endothéline ; Peroxyde d'hydrogène ; CaMKII ; Monoxyde d’azote ; Système vasculaire ; PKB; ERK1/2; IGF-1R; Hypertrophie.
Resumo:
Tesis (Doctorado en Ciencias con orientación en Química de los Materiales) UANL, 2014.
Resumo:
Chronic liver failure leads to hyperammonemia and consequently increased brain ammonia concentrations, resulting in hepatic encephalopathy. When the liver fails to regulate ammonia concentrations, the brain, devoid of a urea cycle, relies solely on the amidation of glutamate to glutamine through glutamine synthetase, to efficiently clear ammonia. Surprisingly, under hyperammonemic conditions, the brain is not capable of increasing its capacity to remove ammonia, which even decreases in some regions of the brain. This non-induction of glutamine synthetase in astrocytes could result from possible limiting substrates or cofactors for the enzyme, or an indirect effect of ammonia on glutamine synthetase expression. In addition, there is evidence that nitration of the enzyme resulting from exposure to nitric oxide could also be implicated. The present review summarizes these possible factors involved in limiting the increase in capacity of glutamine synthetase in brain, in chronic liver failure.