Creating Lakes from Open Pit Mines: Processes and Considerations, Emphasis on Northern Environments

Creating Lakes from Open Pit Mines: Processes and Considerations, Emphasis on Northern Environments. This document summarizes the literature of mining pit lakes (through 2007), with a particular focus on issues that are likely to be of special relevance to the creation and management of pit lakes in northern climates. Pit lakes are simply waterbodies formed by filling the open pit left upon the completion of mining operations with water. Like natural lakes, mining pit lakes display a huge diversity in each of these subject areas. However, pit lakes are young and therefore are typically in a non-equilibrium state with respect to their rate of filling, water quality, and biology. Separate sections deal with different aspects of pit lakes, including their morphometry, geology, hydrogeology, geochemistry, and biology. Depending on the type and location of the mine, there may be opportunities to enhance the recreational or ecological benefits of a given pit lake, for example, by re-landscaping and re-vegetating the shoreline, by adding engineered habitat for aquatic life, and maintaining water quality. The creation of a pit lake may be a regulatory requirement to mitigate environmental impacts from mining operations, and/or be included as part of a closure and reclamation plan. Based on published case studies of pit lakes, large-scale bio-engineering projects have had mixed success. A common consensus is that manipulation of pit lake chemistry is difficult, expensive, and takes many years to achieve remediation goals. For this reason, it is prudent to take steps throughout mine operation to reduce the likelihood of future water quality problems upon closure. Also, it makes sense to engineer the lake in such a way that it will achieve its maximal end-use potential, whether it be permanent and safe storage of mine waste, habitat for aquatic life, recreation, or water supply.

Geology of Iron Deposits at Princeton Montana and Economic Aspects of Iron Ore in Montana

The purpose of this paper is to introduce to the reader, an iron deposit in the Princeton district, about 19 miles northeast by highway from Philipsburg, Montana. Heretofore there has been no written literature on this deposit. It is also intended to investigate the economic possibilities of iron ore in general in the State of Montana.

Essays on behavioral aspects of the design and disclosure of compensation contracts

This thesis consists of four essays on the design and disclosure of compensation contracts. Essays 1, 2 and 3 focus on behavioral aspects of mandatory compensation disclosure rules and of contract negotiations in agency relationships. The three experimental studies develop psychology- based theory and present results that deviate from standard economic predictions. Furthermore, the results of Essay 1 and 2 also have implications for firms’ discretion in how to communicate their top management’s incentives to the capital market. Essay 4 analyzes the role of fairness perceptions for the evaluation of executive compensation. For this purpose, two surveys targeting representative eligible voters as well as investment professionals were conducted. Essay 1 investigates the role of the detailed ‘Compensation Discussion and Analysis’, which is part of the Security and Exchange Commission’s 2006 regulation, on investors’ evaluations of executive performance. Compensation disclosure complying with this regulation clarifies the relationship between realized reported compensation and the underlying performance measures and their target achievement levels. The experimental findings suggest that the salient presentation of executives’ incentives inherent in the ‘Compensation Discussion and Analysis’ makes investors’ performance evaluations less outcome dependent. Therefore, investors’ judgment and investment decisions might be less affected by noisy environmental factors that drive financial performance. The results also suggest that fairness perceptions of compensation contracts are essential for investors’ performance evaluations in that more transparent disclosure increases the perceived fairness of compensation and the performance evaluation of managers who are not responsible for a bad financial performance. These results have important practical implications as firms might choose to communicate their top management’s incentive compensation more transparently in order to benefit from less volatile expectations about their future performance. Similar to the first experiment, the experiment described in Essay 2 addresses the question of more transparent compensation disclosure. However, other than the first experiment, the second experiment does not analyze the effect of a more salient presentation of contract information but the informational effect of contract information itself. For this purpose, the experiment tests two conditions in which the assessment of the compensation contracts’ incentive compatibility, which determines executive effort, is either possible or not. On the one hand, the results suggest that the quality of investors’ expectations about executive effort is improved, but on the other hand investors might over-adjust their prior expectations about executive effort if being confronted with an unexpected financial performance and under-adjust if the financial performance confirms their prior expectations. Therefore, in the experiment, more transparent compensation disclosure does not lead to more correct overall judgments of executive effort and to even lower processing quality of outcome information. These results add to the literature on disclosure which predominantly advocates more transparency. The findings of the experiment however, identify decreased information processing quality as a relevant disclosure cost category. Firms might therefore carefully evaluate the additional costs and benefits of more transparent compensation disclosure. Together with the results from the experiment in Essay 1, the two experiments on compensation disclosure imply that firms should rather focus on their discretion how to present their compensation disclosure to benefit from investors’ improved fairness perceptions and their spill-over on performance evaluation. Essay 3 studies the behavioral effects of contextual factors in recruitment processes that do not affect the employer’s or the applicant’s bargaining power from a standard economic perspective. In particular, the experiment studies two common characteristics of recruitment processes: Pre-contractual competition among job applicants and job applicants’ non-binding effort announcements as they might be made during job interviews. Despite the standard economic irrelevance of these factors, the experiment develops theory regarding the behavioral effects on employees’ subsequent effort provision and the employers’ contract design choices. The experimental findings largely support the predictions. More specifically, the results suggest that firms can benefit from increased effort and, therefore, may generate higher profits. Further, firms may seize a larger share of the employment relationship’s profit by highlighting the competitive aspects of the recruitment process and by requiring applicants to make announcements about their future effort. Finally, Essay 4 studies the role of fairness perceptions for the public evaluation of executive compensation. Although economic criteria for the design of incentive compensation generally do not make restrictive recommendations with regard to the amount of compensation, fairness perceptions might be relevant from the perspective of firms and standard setters. This is because behavioral theory has identified fairness as an important determinant of individuals’ judgment and decisions. However, although fairness concerns about executive compensation are often stated in the popular media and even in the literature, evidence on the meaning of fairness in the context of executive compensation is scarce and ambiguous. In order to inform practitioners and standard setters whether fairness concerns are exclusive to non-professionals or relevant for investment professionals as well, the two surveys presented in Essay 4 aim to find commonalities in the opinions of representative eligible voters and investments professionals. The results suggest that fairness is an important criterion for both groups. Especially, exposure to risk in the form of the variable compensation share is an important criterion shared by both groups. The higher the assumed variable share, the higher is the compensation amount to be perceived as fair. However, to a large extent, opinions on executive compensation depend on personality characteristics, and to some extent, investment professionals’ perceptions deviate systematically from those of non-professionals. The findings imply that firms might benefit from emphasizing the riskiness of their managers’ variable pay components and, therefore, the findings are also in line with those of Essay 1.

Environmental sustainability and the human element: Decision making in National Cancer Institute-designated cancer centers and Practice Greenhealth subscribing institutions

Background. Various aspects of sustainability have taken root in the hospital environment; however, decisions to pursue sustainable practices within the framework of a master plan are not fully developed in National Cancer Institute (NCI) -designated cancer centers and subscribing institutions to the Practice Greenhealth (PGH) listserv.^ Methods. This cross sectional study was designed to identify the organizational characteristics each study group pursed to implement sustainability practices, describe the barriers they encountered and reasons behind their choices for undertaking certain sustainability practices. A web-based questionnaire was pilot tested, and then sent out to 64 NCI-designated cancer centers and 1638 subscribing institutions to the PGH listserv.^ Results. Complete responses were received from 39 NCI-designated cancer centers and 58 subscribing institutions to the PGH listserv. NCI-designated cancer centers reported greater progress in integrating sustainability criteria into design and construction projects than hospitals of institutions subscribing to the PHG listserv (p-value = <0.05). Statistically significant differences were also identified between these two study groups in undertaking work life options, conducting energy usage assessments, developing energy conservation and optimization plans, implementing solid waste and hazardous waste minimization programs, using energy efficient vehicles and reporting sustainability progress to external stakeholders. NCI-designated cancer centers were further along in implementing these programs (p-value = <0.05). In comparing the self-identified NCI-designated cancer centers to centers that indicated they were both and NCI and PGH, the later had made greater progress in using their collective buying power to pursue sustainable purchasing practices within the medical community (p-value = <0.05). In both study groups, recycling programs were well developed.^ Conclusions. Employee involvement was viewed as the most important reason for both study groups to pursue recycling initiatives and incorporated environmental criteria into purchasing decisions. A written sustainability commitment did not readily translate into a high percentage that had developed a sustainability master plan. Coordination of sustainability programs through a designated sustainability professional was not being undertaken by a large number of institutions within each study group. This may be due to the current economic downturn or management's attention to the emerging health care legislation being debated in congress. ^ Lifecycle assessments, an element of a carbon footprint, are seen as emerging areas of opportunity for health care institutions that can be used to evaluate the total lifecycle costs of products and services.^

A QUANTITATIVE INVESTIGATION OF SOURCE AND ELEMENTAL COMPOSITION OF INDOOR AND OUTDOOR FINE PARTICULATE AIR POLLUTION IN HOUSTON (TEXAS)

An investigation was undertaken to determine the chemical characterization of inhalable particulate matter in the Houston area, with special emphasis on source identification and apportionment of outdoor and indoor atmospheric aerosols using multivariate statistical analyses.^ Fine (<2.5 (mu)m) particle aerosol samples were collected by means of dichotomous samplers at two fixed site (Clear Lake and Sunnyside) ambient monitoring stations and one mobile monitoring van in the Houston area during June-October 1981 as part of the Houston Asthma Study. The mobile van allowed particulate sampling to take place both inside and outside of twelve homes.^ The samples collected for 12-h sampling on a 7 AM-7 PM and 7 PM-7 AM (CDT) schedule were analyzed for mass, trace elements, and two anions. Mass was determined gravimetrically. An energy-dispersive X-ray fluorescence (XRF) spectrometer was used for determination of elemental composition. Ion chromatography (IC) was used to determine sulfate and nitrate.^ Average chemical compositions of fine aerosol at each site were presented. Sulfate was found to be the largest single component in the fine fraction mass, comprising approximately 30% of the fine mass outdoors and 12% indoors, respectively.^ Principal components analysis (PCA) was applied to identify sources of aerosols and to assess the role of meteorological factors on the variation in particulate samples. The results suggested that meteorological parameters were not associated with sources of aerosol samples collected at these Houston sites.^ Source factor contributions to fine mass were calculated using a combination of PCA and stepwise multivariate regression analysis. It was found that much of the total fine mass was apparently contributed by sulfate-related aerosols. The average contributions to the fine mass coming from the sulfate-related aerosols were 56% of the Houston outdoor ambient fine particulate matter and 26% of the indoor fine particulate matter.^ Characterization of indoor aerosol in residential environments was compared with the results for outdoor aerosols. It was suggested that much of the indoor aerosol may be due to outdoor sources, but there may be important contributions from common indoor sources in the home environment such as smoking and gas cooking. ^

STRATEGIES FOR THE TRANSFER OF APPROPRIATE TECHNOLOGY TO DEVELOPING COUNTRIES: THE IMPLEMENTATION AND DEVELOPMENT OF ENVIRONMENTAL HEALTH PROGRAMS IN TUNISIA

This dissertation focuses on Project HOPE, an American medical aid agency, and its work in Tunisia. More specifically this is a study of the implementation strategies of those HOPE sponsored projects and programs designed to solve the problems of high morbidity and infant mortality rates due to environmentally related diarrheal and enteric diseases. Several environmental health programs and projects developed in cooperation with Tunisian counterparts are described and analyzed. These include (1) a paramedical manpower training program; (2) a national hospital sanitation and infection control program; (3) a community sewage disposal project; (4) a well reconstruction project; and (5) a solid-waste disposal project for a hospital.^ After independence, Tunisia, like many developing countries, encountered several difficulties which hindered progress toward solving basic environmental health problems and prompted a request for aid. This study discusses the need for all who work in development programs to recognize and assess those difficulties or constraints which affect the program planning process, including those latent cultural and political constraints which not only exist within the host country but within the aid agency as well. For example, failure to recognize cultural differences may adversely affect the attitudes of the host staff towards their work and towards the aid agency and its task. These factors, therefore, play a significant role in influencing program development decisions and must be taken into account in order to maximize the probability of successful outcomes.^ In 1969 Project HOPE was asked by the Tunisian government to assist the Ministry of Health in solving its health manpower problems. HOPE responded with several programs, one of which concerned the training of public health nurses, sanitary technicians, and aids at Tunisia's school of public health in Nabeul. The outcome of that program as well as the strategies used in its development are analyzed. Also, certain questions are addressed such as, what should the indicators of success be, and when is the time right to phase out?^ Another HOPE program analyzed involved hospital sanitation and infection control. Certain generic aspects of basic hospital sanitation procedures were documented and presented in the form of a process model which was later used as a "microplan" in setting up similar programs in other Tunisian hospitals. In this study the details of the "microplan" are discussed. The development of a nation-wide program without any further need of external assistance illustrated the success of HOPE's implementation strategies.^ Finally, although it is known that the high incidence of enteric disease in developing countries is due to poor environmental sanitation and poor hygiene practices, efforts by aid agencies to correct these conditions have often resulted in failure. Project HOPE's strategy was to maximize limited resources by using a systems approach to program development and by becoming actively involved in the design and implementation of environmental health projects utilizing "appropriate" technology. Three innovative projects and their implementation strategies (including technical specifications) are described.^ It is advocated that if aid agencies are to make any progress in helping developing countries basic sanitation problems, they must take an interdisciplinary approach to progrm development and play an active role in helping counterparts seek and identify appropriate technologies which are socially and economically acceptable. ^

Exploring the association of children's engagement in nature and outdoor activity with physical activity: A systematic review

The natural environment and green spaces are settings that may facilitate physical activity and, as a result, combat childhood obesity and benefit children's physical health. A systematic review was conducted to assess the effect of children's engagement in outdoor activity on children's physical activity levels. A total of 169 articles were initially identified, of which 11 were eligible for inclusion in the systematic review. Studies were heterogeneous: cross-sectional, RCT, cohort, and direct observation. Study participants were between the ages of 3-15 years, and physical activity was measured by accelerometers, pedometers, direct observation or surveys. A majority of the studies (9/11) found a positive association between time spent outdoors and physical activity in children and adolescents. Of these 9 studies, 5 found this association specifically between time spent outdoors in greenspace and physical activity. Despite limitations, the findings of this review support the positive association between time spent outdoors and physical activity in children and adolescents, and the notion that children and adolescents who spend more time outdoors are more physically active. This demonstrates the need to use outdoor environments as settings for children's and adolescents' physical activity.^

Baseline evaluation of environmental physical activity and nutrition support of Texas Medical Center hospital worksites

Background: Obesity is a major health problem in the United States that has reached epidemic proportions. With most U.S adults spending the majority of their waking hours at work, the influence of the workplace environment on obesity is gaining in importance. Recent research implicates worksites as providing an 'obesogenic' environment as they encourage overeating and reduce the opportunity for physical activity. Objective: The aim of this study is to describe the nutrition and physical activity environment of Texas Medical Center (TMC) hospitals participating in the Shape Up Houston evaluation study to develop a scoring system to quantify the environmental data collected using the Environmental Assessment Tool (EAT) survey and to assess the inter-observer reliability of using the EAT survey. Methods: A survey instrument that was adapted from the Environmental Assessment Tool (EAT) developed by Dejoy DM et al in 2008 to measure the hospital environmental support for nutrition and physical activity was used for this study. The inter-observer reliability of using the EAT survey was measured and total percent agreement scores were computed. Most responses on the EAT survey are dichotomous (Yes and No) and these responses were coded with a '0' for a 'no' response and a '1' for a 'yes' response. A summative scoring system was developed to quantify these responses. Each hospital was given a score for each scale and subscale on the EAT survey in addition to a total score. All analyses were conducted using Stata 11 software. Results: High inter-observer reliability is observed using EAT. The percentage agreement scores ranged from 94.4%–100%. Only 2 of the 5 hospitals had a fitness facility onsite and scores for exercise programs and outdoor facilities available for hospital employees ranged from 0–62% and 0–37.5%, respectively. The healthy eating percentage for hospital cafeterias range from 42%–92% across the different hospitals while the healthy vending scores were 0%–40%. The total TMC 'healthy hospital' score was 49%. Conclusion: The EAT survey is a reliable instrument for measuring the physical activity and nutrition support environment of hospital worksites. The study results showed a large variability among the TMC hospitals in the existing physical activity and nutrition support environment. This study proposes cost effective policy changes that can increase environmental support to healthy eating and active living among TMC hospital employees.^

Environmental characteristics, and growth traits and leaf chemistry of tundra plants in a warming experiment at Alexandra Fiord

Understanding plant trait responses to elevated temperatures in the Arctic is critical in light of recent and continuing climate change, especially because these traits act as key mechanisms in climate-vegetation feedbacks. Since 1992, we have artificially warmed three plant communities at Alexandra Fiord, Nunavut, Canada (79°N). In each of the communities, we used open-top chambers (OTCs) to passively warm vegetation by 1-2 °C. In the summer of 2008, we investigated the intraspecific trait responses of five key species to 16 years of continuous warming. We examined eight traits that quantify different aspects of plant performance: leaf size, specific leaf area (SLA), leaf dry matter content (LDMC), plant height, leaf carbon concentration, leaf nitrogen concentration, leaf carbon isotope discrimination (LCID), and leaf d15N. Long-term artificial warming affected five traits, including at least one trait in every species studied. The evergreen shrub Cassiope tetragona responded most frequently (increased leaf size and plant height/decreased SLA, leaf carbon concentration, and LCID), followed by the deciduous shrub Salix arctica (increased leaf size and plant height/decreased SLA) and the evergreen shrub Dryas integrifolia (increased leaf size and plant height/decreased LCID), the forb Oxyria digyna (increased leaf size and plant height), and the sedge Eriophorum angustifolium spp. triste (decreased leaf carbon concentration). Warming did not affect d15N, leaf nitrogen concentration, or LDMC. Overall, growth traits were more sensitive to warming than leaf chemistry traits. Notably, we found that responses to warming were sustained, even after many years of treatment. Our work suggests that tundra plants in the High Arctic will show a multifaceted response to warming, often including taller shoots with larger leaves.

Legal Aspects which Implement Good Practice Measures in the Management of Construction and Demolition Waste

The construction industry, one of the most important ones in the development of a country, generates unavoidable impacts on the environment. The social demand towards greater respect for the environment is a high and general outcry. Therefore, the construction industry needs to reduce the impact it produces. Proper waste management is not enough; we must take a further step in environmental management, where new measures need to be introduced for the prevention at source, such as good practices to promote recycling. Following the amendment of the legal frame applicable to Construction and Demolition Waste (C&D waste), important developments have been incorporated in European and International laws, aiming to promote the culture of reusing and recycling. This change of mindset, that is progressively taking place in society, is allowing for the consideration of C&D waste no longer as an unusable waste, but as a reusable material. The main objective of the work presented in this paper is to enhance C&D waste management systems through the development of preventive measures during the construction process. These measures concern all the agents intervening in the construction process as only the personal implication of all of them can ensure an efficient management of the C&D waste generated. Finally, a model based on preventive measures achieves organizational cohesion between the different stages of the construction process, as well as promoting the conservation of raw materials through the use and waste minimization. All of these in order to achieve a C&D waste management system, whose primary goal is zero waste generation

Integration of socioeconomic and genetic aspects involved in the conservation of animal genetic resources = Integración de aspectos socioeconómicos y genéticos involucrados en la conservación de recursos genéticos animales

El sector ganadero está siendo gradualmente dominado por sistemas intensivos y especializados en los que los factores de producción están controlados y en los que los caracteres productivos son los criterios principales para la selección de especies y razas. Entretanto, muchos de los bienes y servicios que tradicionalmente suministraba el ganado, tales como los fertilizantes, la tracción animal o materias primas para la elaboración vestimenta y calzado están siendo reemplazados por productos industriales. Como consecuencia de ambos cambios, las razas seleccionadas intensivamente, las cuales están estrechamente ligadas a sistemas agrícolas de alta producción y altos insumos, han desplazado a muchas razas autóctonas, en las que la selección prácticamente ha cesado o es muy poco intensa. Actualmente existe una mayor conciencia social sobre la situación de las razas autóctonas y muchas funciones del ganado que previamente habían sido ignoradas están siendo reconocidas. Desde hace algunas décadas, se ha aceptado internacionalmente que las razas de ganado cumplen funciones económicas, socio-culturales, medioambientales y de seguridad alimentaria. Por ello, diferentes organismos internacionales han reconocido que la disminución de los recursos genéticos de animales domésticos (RGADs) es un problema grave y han recomendado su conservación. Aun así, la conservación de RGADs es un tema controvertido por la dificultad de valorar las funciones del ganado. Esta valoración es compleja debido que los RGADs tiene una doble naturaleza privada - pública. Como algunos economistas han subrayado, el ganado es un bien privado, sin embargo debido a algunas de sus funciones, también es un bien público. De esta forma, el aumento del conocimiento sobre valor de cada una de sus funciones facilitaría la toma de decisiones en relación a su conservación y desarrollo. Sin embargo, esta valoración es controvertida puesto que la importancia relativa de las funciones del ganado varía en función del momento, del lugar, de las especies y de las razas. El sector ganadero, debido a sus múltiples funciones, está influenciado por factores técnicos, medioambientales, sociales, culturales y políticos que están interrelacionados y que engloban a una enorme variedad de actores y procesos. Al igual que las funciones del ganado, los factores que afectan a su conservación y desarrollo están fuertemente condicionados por localización geográfica. Asimismo, estos factores pueden ser muy heterogéneos incluso dentro de una misma raza. Por otro lado, es razonable pensar que el ganadero es el actor principal de la conservación de razas locales. Actualmente, las razas locales están siendo Integration of socioeconomic and genetic aspects involved in the conservation of animal genetic resources 5 explotadas por ganaderos muy diversos bajo sistemas de producción también muy diferentes. Por todo ello, es de vital importancia comprender y evaluar el impacto que tienen las motivaciones, y el proceso de toma de decisiones de los ganaderos en la estructura genética de las razas. En esta tesis doctoral exploramos diferentes aspectos sociales, económicos y genéticos involucrados en la conservación de razas locales de ganado vacuno en Europa, como ejemplo de RGADs, esperando contribuir al entendimiento científico de este complejo tema. Nuestro objetivo es conseguir una visión global de los procesos subyacentes en la conservación y desarrollo de estas razas. Pretendemos ilustrar como se pueden utilizar métodos cuantitativos en el diseño y establecimiento de estrategias de conservación y desarrollo de RGADs objetivas y adecuadas. En primer lugar, exploramos el valor económico total (VET) del ganado analizando sus componentes públicos fuera de mercado usando como caso de estudio la raza vacuna Alistana-Sanabresa (AS). El VET de cualquier bien está formado por componentes de uso y de no-uso. Estos últimos incluyen el valor de opción, el valor de herencia y el valor de existencia. En el caso del ganado local, el valor de uso directo proviene de sus productos. Los valores de uso indirecto están relacionados con el papel que cumple las razas en el mantenimiento de los paisajes y cultura rural. El valor de opción se refiere a su futuro uso potencial y el valor de herencia al uso potencial de las generaciones venideras. Finalmente, el valor de existencia está relacionado con el bienestar que produce a la gente saber que existe un recurso específico. Nuestro objetivo fue determinar la importancia relativa que tienen los componentes fuera de mercado sobre el VET de la raza AS. Para ello evaluamos la voluntad de la gente a pagar por la conservación de la AS mediante experimentos de elección (EEs) a través de encuestas. Estos experimentos permiten valorar individualmente los distintos componentes del VET de cualquier bien. Los resultados los analizamos mediante de uso de modelos aleatorios logit. Encontramos que las funciones públicas de la raza AS tienen un valor significativo. Sus valores más importantes son el valor de uso indirecto como elemento cultural Zamorano y el valor de existencia (ambos representaron el 80% de VET). Además observamos que el valor que gente da a las funciones públicas de la razas de ganado dependen de sus características socioeconómicas. Los factores que condicionaron la voluntad a pagar para la conservación de la raza AS fueron el lugar de residencia (ciudad o pueblo), el haber visto animales de la raza o haber consumido sus productos y la actitud de los encuestados ante los conflictos entre el desarrollo económico y el medioambiente. Por otro lado, encontramos que no todo el mundo tiene una visión completa e integrada de todas las funciones públicas de la raza AS. Por este motivo, los programas o actividades de concienciación sobre su estado deberían hacer hincapié en este aspecto. La existencia de valores públicos de la raza AS implica que los ganaderos deberían recibir compensaciones económicas como pago por las funciones públicas que cumple su raza local. Las compensaciones asegurarían un tamaño de población que permitiría que la raza AS siga realizando estas funciones. Un mecanismo para ello podría ser el desarrollo del turismo rural relacionado con la raza. Esto aumentaría el valor de uso privado mientras que supondría un elemento añadido a las estrategias de conservación y desarrollo. No obstante, los ganaderos deben analizar cómo aprovechar los nichos de mercado existentes, así como mejorar la calidad de los productos de la raza prestando especial atención al etiquetado de los mismos. Una vez evaluada la importancia de las funciones públicas de las razas locales de ganado, analizamos la diversidad de factores técnicos, económicos y sociales de la producción de razas locales de ganado vacuno existente en Europa. Con este fin analizamos el caso de quince razas locales de ocho países en el contexto de un proyecto de colaboración internacional. Investigamos las diferencias entre los países para determinar los factores comunes clave que afectan a la viabilidad de las razas locales. Para ello entrevistamos mediante cuestionarios a un total de 355 ganaderos en las quince razas. Como indicador de viabilidad usamos los planes de los ganaderos de variación del tamaño de las ganaderías. Los cuestionarios incluían diferentes aspectos económicos, técnicos y sociales con potencial influencia en las dinámicas demográficas de las razas locales. Los datos recogidos los analizamos mediante distintas técnicas estadísticas multivariantes como el análisis discriminante y la regresión logística. Encontramos que los factores que afectan a la viabilidad de las razas locales en Europa son muy heterogéneos. Un resultado reseñable fue que los ganaderos de algunos países no consideran que la explotación de su raza tenga un alto valor social. Este hecho vuelve a poner de manifiesto la importancia de desarrollar programas Europeos de concienciación sobre la importancia de las funciones que cumplen las razas locales. Además los países analizados presentaron una alta variabilidad en cuanto a la importancia de los mercados locales en la distribución de los productos y en cuanto al porcentaje en propiedad del total de los pastos usados en las explotaciones. Este estudio reflejó la variabilidad de los sistemas y medios de producción (en el sentido socioeconómico, técnico y ecológico) que existe en Europa. Por ello hay que ser cautos en la implementación de las políticas comunes en los diferentes países. También encontramos que la variabilidad dentro de los países puede ser elevada debido a las diferencias entre razas, lo que implica que las políticas nacionales deber ser suficientemente flexibles para adaptarse a las peculiaridades de cada una de las razas. Por otro lado, encontramos una serie de factores comunes a la viabilidad de las razas en los distintos países; la edad de los ganaderos, la colaboración entre ellos y la apreciación social de las funciones culturales, medioambientales y sociales del ganado local. El envejecimiento de los ganaderos de razas locales no es solo un problema de falta de transferencia generacional, sino que también puede suponer una actitud más negativa hacia la inversión en las actividades ganaderas y en una menor capacidad de adaptación a los cambios del sector. La capacidad de adaptación de los ganaderos es un factor crucial en la viabilidad de las razas locales. Las estrategias y políticas de conservación comunes deben incluir las variables comunes a la viabilidad de las razas manteniendo flexibilidad suficiente para adaptarse a las especificidades nacionales. Estas estrategias y políticas deberían ir más allá de compensación económica a los ganaderos de razas locales por la menor productividad de sus razas. Las herramientas para la toma de decisiones ayudan a generar una visión amplia de la conservación y desarrollo de las razas locales. Estas herramientas abordan el diseño de estrategias de conservación y desarrollo de forma sistemática y estructurada. En la tercera parte de la tesis usamos una de estas herramientas, el análisis DAFO (Debilidades, Amenazas, Fortalezas y Oportunidades), con este propósito, reconociendo que la conservación de RGADs depende de los ganaderos. Desarrollamos un análisis DAFO cuantitativo y lo aplicamos a trece razas locales de ganado vacuno de seis países europeos en el contexto del proyecto de colaboración mencionado anteriormente. El método tiene cuatro pasos: 1) la definición del sistema; 2) la identificación y agrupación de los factores influyentes; 3) la cuantificación de la importancia de dichos factores y 4) la identificación y priorización de estrategias. Identificamos los factores utilizando multitud de agentes (multi-stakeholder appproach). Una vez determinados los factores se agruparon en una estructura de tres niveles. La importancia relativa de los cada uno de los factores para cada raza fue determinada por grupos de expertos en RGADs de los países integrados en el citado proyecto. Finalmente, desarrollamos un proceso de cuantificación para identificar y priorizar estrategias. La estructura de agrupación de factores permitió analizar el problema de la conservación desde el nivel general hasta el concreto. La unión de análisis específicos de cada una de las razas en un análisis DAFO común permitió evaluar la adecuación de las estrategias a cada caso concreto. Identificamos un total de 99 factores. El análisis reveló que mientras los factores menos importantes son muy consistentes entre razas, los factores y estrategias más relevantes son muy heterogéneos. La idoneidad de las estrategias fue mayor a medida que estas se hacían más generales. A pesar de dicha heterogeneidad, los factores influyentes y estrategias más importantes estaban ligados a aspectos positivos (fortalezas y oportunidades) lo que implica que el futuro de estas razas es prometedor. Los resultados de nuestro análisis también confirmaron la gran relevancia del valor cultural de estas razas. Las factores internos (fortalezas y debilidades) más importantes estaban relacionadas con los sistemas de producción y los ganaderos. Las oportunidades más relevantes estaban relacionadas con el desarrollo y marketing de nuevos productos mientras que las amenazas más importantes se encontraron a la hora de vender los productos actuales. Este resultado implica que sería fructífero trabajar en la motivación y colaboración entre ganaderos así como, en la mejora de sus capacidades. Concluimos que las políticas comunes europeas deberían centrarse en aspectos generales y ser los suficientemente flexibles para adaptarse a las singularidades de los países y las razas. Como ya se ha mencionado, los ganaderos juegan un papel esencial en la conservación y desarrollo de las razas autóctonas. Por ello es relevante entender que implicación puede tener la heterogeneidad de los mismos en la viabilidad de una raza. En la cuarta parte de la tesis hemos identificado tipos de ganaderos con el fin de entender cómo la relación entre la variabilidad de sus características socioeconómicas, los perfiles de las ganaderías y las dinámicas de las mismas. El análisis se ha realizado en un contexto sociológico, aplicando los conceptos de capital cultural y económico. Las tipologías se han determinado en función de factores socioeconómicos y culturales indicadores del capital cultural y capital económico de un individuo. Nuestro objetivo era estudiar si la tipología socioeconómica de los ganaderos afecta al perfil de su ganadería y a las decisiones que toman. Entrevistamos a 85 ganaderos de la raza Avileña-Negra Ibérica (ANI) y utilizamos los resultados de dichas entrevistas para ilustrar y testar el proceso. Definimos los tipos de ganaderos utilizando un análisis de clúster jerarquizado con un grupo de variables canónicas que se obtuvieron en función de cinco factores socioeconómicos: el nivel de educación del ganadero, el año en que empezó a ser ganadero de ANI, el porcentaje de los ingresos familiares que aporta la ganadería, el porcentaje de propiedad de la tierra de la explotación y la edad del ganadero. La tipología de los ganaderos de ANI resultó ser más compleja que en el pasado. Los resultados indicaron que los tipos de ganaderos variaban en muchos aspectos socioeconómicos y en los perfiles de sus Integration of socioeconomic and genetic aspects involved in the conservation of animal genetic resources 9 ganaderías. Los tipos de ganaderos determinados toman diferentes decisiones en relación a la modificación del tamaño de su ganadería y a sus objetivos de selección. Por otro lado, reaccionaron de forma diferente ante un hipotético escenario de reducción de las compensaciones económicas que les planteamos. En este estudio hemos visto que el capital cultural y el económico interactúan y hemos explicado como lo hacen en los distintos tipos de ganaderos. Por ejemplo, los ganaderos que poseían un mayor capital económico, capital cultural formal y capital cultural adquirido sobre la raza, eran los ganaderos cuyos animales tenían una mayor demanda por parte de otros ganaderos, lo cual podría responder a su mayor prestigio social dentro de la raza. Uno de los elementos claves para el futuro de la raza es si este prestigio responde a una superioridad genética de las animales. Esto ocurriría si los ganaderos utilizaran las herramientas que tienen a su disposición a la hora de seleccionar animales. Los tipos de ganaderos identificados mostraron también claras diferencias en sus formas de colaboración y en su reacción a una hipotética variación de las compensaciones económicas. Aunque algunos tipos de ganaderos mostraron un bajo nivel de dependencia a estas compensaciones, la mayoría se manifestaron altamente dependientes. Por ello cualquier cambio drástico en la política de ayudas puede comprometer el desarrollo de las razas autóctonas. La adaptación las políticas de compensaciones económicas a la heterogeneidad de los ganaderos podría aumentar la eficacia de las mismas por lo que sería interesante explorar posibilidades a este respecto. Concluimos destacando la necesidad de desarrollar políticas que tengan en cuenta la heterogeneidad de los ganaderos. Finalmente abordamos el estudio de la estructura genética de poblaciones ganaderas. Las decisiones de los ganaderos en relación a la selección de sementales y su número de descendientes configuran la estructura demográfica y genética de las razas. En la actualidad existe un interés renovado por estudiar las estructuras poblacionales debido a la influencia potencial de su estratificación sobre la predicción de valores genómicos y/o los análisis de asociación a genoma completo. Utilizamos dos métodos distintos, un algoritmo de clústeres basados en teoría de grafos (GCA) y un algoritmo de clustering bayesiano (STRUCTURE) para estudiar la estructura genética de la raza ANI. Prestamos especial atención al efecto de la presencia de parientes cercanos en la población y de la diferenciación genética entre subpoblaciones sobre el análisis de la estructura de la población. En primer lugar evaluamos el comportamiento de los dos algoritmos en poblaciones simuladas para posteriormente analizar los genotipos para 17 microsatélites de 13343 animales de 57 ganaderías distintas de raza ANI. La ANI es un ejemplo de raza con relaciones complejas. Por otro lado, utilizamos el archivo de pedigrí de la raza para estudiar el flujo de genes, calculando, entre otras cosas, la contribución de cada ganadería a la constitución genética de la raza. En el caso de las poblaciones simuladas, cuando el FST entre subpoblaciones fue suficientemente alto, ambos algoritmos, GCA y STRUCTURE, identificaron la misma estructura genética independientemente de que existieran o no relaciones familiares. Por el contrario, cuando el grado de diferenciación entre poblaciones fue bajo, el STRUCTURE identificó la estructura familiar mientras que GCA no permitió obtener ningún resultado concluyente. El GCA resultó ser un algoritmo más rápido y eficiente para de inferir la estructura genética en poblaciones con relaciones complejas. Este algoritmo también puede ser usado para reducir el número de clústeres a testar con el STRUTURE. En cuanto al análisis de la población de ANI, ambos algoritmos describieron la misma estructura, lo cual sugiere que los resultados son robustos. Se identificaron tres subpoblaciones diferenciadas que pudieran corresponderse con tres linajes distintos. Estos linajes estarían directamente relacionados con las ganaderías que han tenido una mayor contribución a la constitución genética de la raza. Por otro lado, hay un conjunto muy numeroso de individuos con una mezcla de orígenes. La información molecular describe una estructura estratificada de la población que se corresponde con la evolución demográfica de la raza. Es esencial analizar en mayor profundidad la composición de este último grupo de animales para determinar cómo afecta a la variabilidad genética de la población de ANI. SUMMARY Summary Livestock sector is gradually dominated by intensive and specialized systems where the production environment is controlled and the production traits are the main criteria for the selection of species and breeds. In the meantime, the traditional use of domestic animals for draught work, clothes and manure has been replaced by industrial products. As a consequence of both these changes, the intensively selected breeds closely linked with high-input highoutput production systems have displaced many native breeds where the selection has practically ceased or been very mild. People are now more aware of the state of endangerment among the native breeds and the previously ignored values of livestock are gaining recognition. For some decades now, the economic, socio-cultural, environmental and food security function of livestock breeds have been accepted worldwide and their loss has been recognized as a major problem. Therefore, the conservation of farm animal genetic resources (FAnGR) has been recommended. The conservation of FAnGR is controversial due to the complexity of the evaluation of its functions. This evaluation is difficult due to the nature of FAnGR both as private and public good. As some economists have highlighted, livestock animals are private goods, however, they are also public goods by their functions. Therefore, there is a need to increase the knowledge about the value of all livestock functions since to support the decision-making for the sustainable conservation and breeding of livestock. This is not straightforward since the relative importance of livestock functions depends on time, place, species and breed. Since livestock play a variety of roles, their production is driven by interrelated and everchanging economic, technical, environmental, social, cultural and political elements involving an enormous range of stakeholders. Not only FAnGR functions but also the importance of factors affecting the development and conservation of FAnGR can be very different across geographical areas. Furthermore, heterogeneity can be found even within breeds. Local breeds are nowadays raised by highly diverse farmers in equally diverse farms. It is quite reasonable to think that farmer is the major actor in the in situ conservation of livestock breeds. Thus, there is a need to understand the farmers’ motivations, decision making processes and the impact of their decisions on the genetic structure of breeds. In this PhD thesis we explore different social, economic and genetic aspects involved in the conservation of local cattle breeds, i.e. FAnGR, in Europe seeking to contribute to the scientific understanding of this complex issue. We aim to achieve a comprehensive view of the processes involved in the conservation and development of local cattle breeds and have made special efforts in discussing the implications of the research results in this respect. The final outcome of the thesis is to illustrate how quantitative methods can be exploited in designing and establishing sound strategies and programmes for the conservation and development of local livestock breeds. Firstly we explored the public non-market attributes of the total economic value (TEV) of livestock, using the Spanish Alistana-Sanabresa (AS) cattle breed as a case study. Total economic value of any good comprises both use and non-use components, where the latter include option, bequest and existence values. For livestock, the direct use values are mainly stemming from production outputs. Indirect use values relate to the role of livestock as a maintainer of rural culture and landscape. The option value is related to the potential use of livestock, the bequest values relate to the value associated with the inheritance of the resources to future generation and the existence values relate to the utility perceived by people from knowing that specific resources exist. We aimed to determine the relative importance of the non-market components of the TEV of the AS breed, the socio-economic variables that influence how people value the different components of TEV and to assess the implications of the Spanish national conservation strategy for the AS breed. To do so, we used a choice experiment (CE) approach and applied the technique to assess people’s willingness to pay (WTP) for the conservation of AS breed. The use of CE allows the valuation of the individual components of TEV for a given good. We analysed the choice data using a random parameter logit (RPL) model. AS breed was found to have a significant public good value. Its most important values were related to the indirect use value due to the maintenance of Zamorian culture and the existence value (both represent over 80% of its TEV). There were several socioeconomic variables influencing people’s valuation of the public service of the breed. In the case of AS breed, the place of living (city or rural area), having seen animals of the breed, having eaten breed products and the respondents’ attitude towards economic development – environment conflicts do influence people’s WTP for AS conservation. We also found that people do not have a complete picture of all the functions and roles that AS breed as AnGR. Therefore, the actions for increasing awareness of AS should go to that direction. The farmers will need incentives to exploit some of the public goods values and maintain the breed population size at socially desirable levels. One such mechanism could be related to the development of agritourism, which would enhance the private good value and provide an important addition to the conservation and utilisation strategy. However, the farmers need a serious evaluation on how to invest in niche product development or how to improve product quality and brand recognition. Using the understanding on the importance of the public function of local cattle we tried to depict the current diversity regarding technical, economic and social factors found in local cattle farming across Europe. To do so we focused in an international collaborative project on the case of fifteen local cattle breeds in eight European countries. We investigated the variation among the countries to detect the common key elements, which affect the viability of local breeds. We surveyed with interviews a total of 355 farms across the fifteen breeds. We used the planned herd size changes by the farmer as an indicator of breed viability. The questionnaire included several economic, technical and social aspects with potential influence on breeds’ demographic trends. We analysed the data using multivariate statistical techniques, such as discriminat analysis and logistic regression. The factors affecting a local breed’s viability were highly heterogeneous across Europe. In some countries, farmers did not recognise any high social value attached to keeping a local cattle breed. Hence there is a need to develop communication programmes across EU countries making people aware about the diversity and importance of values associated to raising local breeds. The countries were also very variable regarding the importance of local markets and the percentage of farm land owned by the farmers. Despite the country specificities, there were also common factors affecting the breed viability across Europe. The factors were from different grounds, from social, such as the age of the farmer and the social appreciation of their work, to technicalorganizational, such as the farmers’ attitude to collaborating with each other. The heterogeneity found reflects the variation in breeding systems and production environment (in the socioeconomic, technical and ecological sense) present in Europe. Therefore, caution should be taken in implementing common policies at the country level. Variability could also be rather high within countries due to breed specificities. Therefore, the national policies should be flexible to adapt to the specificities. The variables significantly associated with breed viability should be positively incorporated in the conservation strategies, and considered in developing common and/or national policies. The strategy preparation and policy planning should go beyond the provision of a general economic support to compensate farmers for the lower profitability of local breeds. Of particular interest is the observation that the opportunity for farmer collaboration and the appreciation by the society of the cultural, environmental and social role of local cattle farming were positively associated with the breed survival. In addition, farmer's high age is not only a problem of poor generation transfer but it is also a problem because it might lead to a lower attitude to investing in farming activities and to a lower ability to adapt to environment changes. The farmers’ adaptation capability may be a key point for the viability of local breeds. Decision making tools can help to get a comprehensive view on the conservation and development of local breeds. It allows us to use a systematic and structured approach for identifying and prioritizing conservation and development strategies. We used SWOT (Strengths, Weaknesses Opportunities and Threats) analysis for this purpose and recognized that many conservation and development projects rely on farmers. We developed a quantified SWOT method and applied it in the aforementioned collaborative research to a set of thirteen cattle breeds in six European countries. The method has four steps: definition of the system, identification and grouping of the driving factors, quantification of the importance of driving factors and identification and prioritization of the strategies. The factors were determined following a multi-stakeholder approach and grouped with a three level structure. FAnGR expert groups ranked the factors and a quantification process was implemented to identify and prioritize strategies. The structure of the SWOT analysis allowed analyzing the conservation problem from general down to specific perspectives. Joining breed specific analyses into a common SWOT analysis permitted comparison of breed cases across countries. We identified 99 driving factors across breeds. The across breed analysis revealed that irrelevant factors were consistent. There was high heterogeneity among the most relevant factors and strategies. The strategies increased eligibility as they lost specificity. Although the situation was very heterogeneous, the most promising factors and strategies were linked to the positive aspects (Strengths and Opportunities). Therefore, the future of the studied local breed is promising. The results of our analysis also confirmed the high relevance of the cultural value of the breeds. The most important internal factors (strengths and weaknesses) were related farmers and production systems. The most important opportunities were found in developing and marketing new products, while the most relevant threats were found in selling the current conventional products. In this regard, it should be fruitful to work on farmers’ motivation, collaboration, and capacity building. We conclude that European policies should focus on general aspects and be flexible enough to be adapted to the country and breed specificities. As mentioned, farmers have a key role in the conservation and development of a local cattle breed. Therefore, it is very relevant to understand the implications of farmer heterogeneity within a breed for its viability. In the fourth part of the thesis, we developed a general farmer typology to help analyzing the relations between farmer features and farm profiles, herd dynamics and farmers’ decision making. In the analysis we applied and used the sociological framework of economic and cultural capital and studied how the determined farmer types were linked to farm profiles and breeding decisions, among others. The typology was based on measurable socioeconomic factors indicating the economic and cultural capital of farmers. A group of 85 farmers raising the Spanish Avileña-Negra Ibérica (ANI) local cattle breed was used to illustrate and test the procedure. The farmer types were defined by a hierarchical cluster analysis with a set of canonical variables derived from the following five the socioeconomic factors: the formal educational level of the farmer, the year the farmer started keeping the ANI breed, the percentage of the total family income covered by the farm, the percentage of the total farm land owned by the farmer and the farmer’s age. The present ANI farmer types were much more complex than what they were in the past. We found that the farmer types differed in many socioeconomic aspects and in the farms profile. Furthermore, the types also differentiate farmers with respect to decisions about changing the farm size, breeding aims and stated reactions towards hypothetical subsidy variation. We have verified that economic and cultural capitals are not independent and further showed how they are interacting in the different farmer types. The farmers related to the types with high economic, institutionalized and embodied cultural capitals had a higher demand of breeding animals from others farmers of the breed, which may be related to the higher social prestige within the breed. One of the key implications of this finding for the future of the breed is whether or not the prestige of farmers is related to genetic superiority of their animals, what is to say, that it is related with a sound use of tools that farmers have available to make selection decisions. The farmer types differed in the form of collaboration and in the reactions to the hypothetical variation in subsidies. There were farmers with low dependency on subsidies, while most of them are highly dependent on subsidies. Therefore, any drastic change in the subsidy programme might have influence on the development of local breeds. The adaptation of these programme to the farmers’ heterogeneity might increase its efficacy, thus it would be interesting to explore ways of doing it. We conclude highlighting the need to have a variety of policies, which take into account the heterogeneity among the farmers. To finish we dealt with the genetic structure of livestock populations. Farmers’ decisions on the breeding animals and their progeny numbers shape the demographic and genetic structure of the breeds. Nowadays there is a renovated interest in studying the population structure since it can bias the prediction of genomic breeding values and genome wide association studies. We determined the genetic structure of ANI breed using two different methods, a graphical clustering algorithm (GCA) and a Bayesian clustering algorithm (STRUCTURE) were used. We paid particular attention to the influence that the presence of closely related individuals and the genetic differentiation of subpopulations may have on the inferences about the population structure. We first evaluated the performance of the algorithms in simulated populations. Then we inferred the genetic structure of the Spanish cattle breed ANI analysing a data set of 13343 animals (genotyped for 17 microsatellites) from 57 herds. ANI breed is an example of a population with complex relationships. We used the herdbook to study the gene flow, estimation among other things, the contribution of different herds to the genetic composition of the ANI breed. For the simulated scenarios, when FST among subpopulations was sufficiently high, both algorithms consistently inferred the correct structure regardless of the presence of related individuals. However, when the genetic differentiation among subpopulations was low, STRUCTURE identified the family based structure while GCA did not provide any consistent picture. The GCA was a fast and efficient method to infer genetic structure to determine the hidden core structure of a population with complex history and relationships. GCA could also be used to narrow down the number of clusters to be tested by STRUCTURE. Both, STRUCTURE and GCA describe a similar structure for the ANI breed suggesting that the results are robust. ANI population was found to have three genetically differentiated clusters that could correspond to three genetic lineages. These are directly related to the herds with a major contribution to the breed. In addition, ANI breed has also a large pool made of individuals with an admixture of origins. The genetic structure of ANI, assessed by molecular information, shows a stratification that corresponds to the demographic evolution of the breed. It will be of great importance to learn more about the composition of the pool and study how it is related to the existing genetic variability of the breed.

Some aspects of lubrication in heavy regimes: thermal effects, stability and turbulence

In this work, a combination of numerical methods applied to thermohydrodynamic lubrication problems with cavitation is presented. It should be emphasized the difficulty of the nonlinear mathematical coupled model involving a free boundary problem, but also the simplicity of the algorithms employed to solve it. So, finite element discretizations for the hydrodynamic and thermal equations combined with upwind techniques for the convection terms and duality methods for nonlinear features are proposed. Additionally, a model describing the movement of the shaft is provided. Considering the shaft as a rigid body this model will consist of an ODE system relating acceleration of the center of gravity and external and pressure loads. The numerical experiments of mechanical stability try to clarify the position of the neutral stability curve. Finally, a rotating machine for ship propulsion involving both axial and radial bearings operating with nonconventional lubricants (seawater to avoid environmental pollution) is analyzed by using laminar and turbulent inertial flows.

Dinámicas de ocupación urbana del Anillo Verde metropolitano, desde sus orígenes en el Plan General del Área Metropolitana de Madrid de 1963 hasta el Plan General de Ordenación Urbana de 1997

El Anillo Verde metropolitano, definido por el Plan General de Ordenación Urbana del Área Metropolitana de Madrid en 1963 siguiendo los modelos planteados por la cultura urbanística internacional, como armadura de la estructura urbana del AMM, espacio protagonista dentro del sistema de espacios libres, lugar de uso público destinado al recreo y contacto con la naturaleza de la población madrileña, se convierte en realidad en una reserva de suelo que va entrando en juego motivado por las alianzas entre el poder institucional y la clase social dominante actuando al margen del planeamiento, poniendo en evidencia la escasez de recursos legales y culturales disponibles para la salvaguarda de los intereses comunes y, donde los condicionantes geográficos y naturales del territorio madrileño han influido decisivamente en la especialización funcional y espacial del Área Metropolitana de Madrid. Así pues considerando esta idea como HIPÓTESIS, el objetivo de la TESIS sería demostrarla, para lo cual se hace necesario primero, acotar espacial y temporalmente el objeto de estudio, es decir, del Anillo Verde metropolitano1, segundo, contextualizar histórica y disciplinarmente los presupuestos teóricos que conformaban la idea del Anillo Verde, tercero, reconocer, localizar y documentar las piezas que han ido materializando la ocupación urbana del Anillo Verde, clasificándolas según parámetros temporales, funcionales, urbanísticos y, formales, lo que permite analizar la geografía, uso, instrumentación y forma de su transformación a escala general metropolitana y, cuarto, profundizar a modo de comprobación a escala municipal y urbana en dos escenarios representativos del conjunto metropolitano: el municipio de Pozuelo de Alarcón y el distrito de Hortaleza-Barajas. El contenido del documento se divide en tres bloques, el bloque I, se centra en las bases teóricas, el bloque II sitúa el hilo argumental de la tesis a escala metropolitana y el bloque III comprueba el fenómeno a escala municipal y urbana. De esta forma, se comienza por la comprensión del significado del concepto del Anillo Verde, que va más allá de la dimensión instrumental asignada de límite y contención urbana frente al crecimiento de la ciudad industrial de principios del siglo XX, basada en la descentralización de la ciudad tradicional, para adquirir un significado más complejo, como gran espacio de reserva y salvaguarda de valores naturales y culturales que se expresaban en su territorio y que permitirían alcanzar el equilibrio entre la ciudad y sus habitantes, es decir, entre el hombre y el espacio que habita. Se hace un recorrido por las principales corrientes urbanísticas que se van nutriendo de distintas disciplinas (economía, sociología, geografía, biología, ecología) para plantear teorías que permitieran materializar un nuevo orden urbano según principios de equidad social, económica y ambiental, en una secuencia donde Europa y Estados Unidos realizaban un constante intercambio -el movimiento de la Ciudad Jardín o el Regionalismo, que dieron paso a propuestas como el Greater London o el Gran Berlín, donde la figura del Anillo Verde tenía un papel protagonista, y del que también participaría nuestro país y la ciudad de Madrid, con modelos regionales como el Plan Besteiro y urbanos como el Plan Bidagor, antecedentes directos del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963 que pone en marcha la ordenación del crecimiento metropolitano de Madrid. El hilo argumental de la tesis se organiza en una doble aproximación: un acercamiento a escala metropolitana a partir del reconocimiento del modelo de ciudad definido en los distintos planes generales que acompañaron el desarrollo metropolitano (municipio de Madrid y de los siete términos municipales que rodeaban a este y que tenían suelo destinado a Anillo Verde), haciendo referencia además a las relaciones con el planeamiento regional, concretando en una escala de aproximación municipal que avanza hasta la interpretación urbana detallada. El primer acercamiento tiene lugar en el bloque II y se organiza en tres capítulos. El capítulo 4 se dedica al punto obligado de partida de la geografía local, describiendo las características biofísicas de los terrenos que formaban parte del Anillo Verde, que han marcado históricamente la forma de aprovechamiento del territorio, desde las extensiones de bosques mediterráneos al norte y al oeste continuación del Monte del Pardo, a los distintos tipos de cultivo que se adaptaban al sustrato geológico y la forma del terreno (de las suaves ondulaciones de sedimentos arcósicos al norte a las extensas plataformas arenosas y yesíferas del sur), además de las zonas de huertos aprovechando las depresiones y los cursos de agua (arroyo del Monte Carmelo, arroyo de Valdebebas, arroyo del Quinto, arroyo del Santo, arroyo Butarque, arroyo Meaques y arroyo Pozuelo). Una vez reconocida la realidad física, el capítulo 5, avanza en la descripción de los distintos modelos de ciudad propuestos desde el planeamiento urbanístico, en sus distintas escalas, la regional y la municipal, como respuesta a la coyuntura social, económica y política que ha caracterizado el proceso de ocupación del Anillo Verde al compás de la construcción del AMM. Se han reunido las propuestas de planeamiento municipal de los distintos municipios que disponían de terreno calificado como Anillo Verde: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte y Pozuelo de Alarcón. Además se han incorporado las distintas propuestas de ordenación territorial que han servido de referencia al planeamiento municipal, en todas sus versiones, desde las sectoriales, de mayor éxito y apoyo institucional, a los distintos intentos de ordenación integral, de mayor complejidad pero de menor calado, precisamente por la dificultad de consenso entre la ordenación física y el desarrollo económico, entre los intereses privados y el beneficio público. El primer horizonte, comienza con la formulación del Plan General de Ordenación Urbana del Área Metropolitana de Madrid de 1963, su desarrollo y la puesta en marcha de los primeros planes municipales en la década de los años setenta, donde se comprueba la necesidad de un marco regional que “ordene” el territorio de forma integral y sirva de referencia a las actuaciones sectoriales que habían marcado el primer desarrollo metropolitano. El segundo, se sitúa dos décadas más tarde con la aprobación del Plan General de Ordenación Urbana de Madrid de 1985 y el conjunto de planes municipales de los términos limítrofes, que siguen su filosofía de austeridad en cuanto a crecimiento territorial. El tercero se inicia en 1997 con la siguiente generación de planes de corte neoliberal que imponen un modelo territorial basado en las grandes operaciones metropolitanas de centralidad, infraestructuras y equipamiento, que consumen de forma indiscriminada la totalidad del territorio madrileño. Será en el último capítulo del segundo bloque (capítulo 6) donde se represente gráficamente a escala metropolitana y se analicen las 229 piezas que han ido colmatando el espacio destinado a Anillo Verde, según los parámetros de estudio, en base a las cuales se plantean las primeras conclusiones generales de la tesis, poniendo de manifiesto que las alianzas entre los agentes soberanos en la construcción de la ciudad y su entorno han trasgredido sucesivamente las determinaciones del Planeamiento en su definición de modelo de ciudad y territorio, acusando la carencia de recursos instrumentales y jurídicos que alentaron el proceso de su desmantelamiento, y revelando la influencia de los condicionantes geográficos y naturales en la especialización funcional y segregación social en el conjunto del Área Metropolitana de Madrid. Se remata el discurso metropolitano con una batería de conclusiones que interpretan el fenómeno de ocupación del anillo de verdor metropolitano confirmando las hipótesis iniciales, reconociendo los valores medioambientales y culturales trasgredidos, sus diversos actores, las numerosas operaciones urbanísticas desarrolladas con distintos usos y envergadura, así como los instrumentos de planeamiento utilizados, en base a las cuales se materializa la construcción del AMM según un modelo extendido (spread), dibujando una mancha de aceite (o grase-spots según Geddes) que precisamente había querido evitarse desde el planeamiento urbanístico con la definición de un Anillo Verde, espacio inmune a la edificación, que se aleja de su papel estructurante (equilibrador entre la ciudad y sus habitantes) para convertirse en armadura de la estructura comunicativa, que una vez consolidada se convierte en la mejor aliada de la máquina inmobiliaria. El último paso, se desarrolla en el bloque III que se divide en los capítulo 7,8 y 9 y supone la comprobación de lo descrito en el conjunto de escala metropolitana, en dos aspectos fundamentales, la falta de consideración por los valores culturales y medioambientales que han modelado el territorio, imprimiéndole un carácter singular y específico y, la estructura del dominio del suelo, donde se reconoce de forma precisa el grupo social y los agentes encargados en cada momento de comercializar los suelos del anillo, que bajo el paraguas de la urgencia social y el engañoso beneficio popular, obtienen importantes beneficios económicos. Con esa intención, se da un salto hacia la escala municipal y urbana, seleccionando dos escenarios de estudio, el municipio de Pozuelo de Alarcón, que representa la materialización del crecimiento suburbano de la élite madrileña ocupando las zonas de mayor valor ecológico del anillo, y el distrito de Hortaleza-Barajas que ofrece su territorio a las grandes operaciones metropolitanas, apoyándose en el eje de actividad marcado por la conexión Madrid-Barcelona y el sistema aeroportuario de escala global, ambos situados al norte de la línea de borde entre la Sierra y la Mancha, ocupando por tanto los lugares más valiosos de la geografía madrileña (estructura funcional anticipada por Bidagor en 1946 en su modelo de ciudad adaptada al territorio madrileño) Una vez descrito este proceso trasgresor de límites, de normas, de conductas, y desde una perspectiva del fenómeno suficientemente documentada, en el capítulo 10, se realiza una reflexión sobre la incidencia real de la propuesta urbanística del Anillo Verde en la construcción del AMM, de la misma forma que se sugieren nuevos roles al planeamiento en un formato intencionado de largo recorrido en oposición a lo inmediato y circunstancial, que permita hacer una nueva lectura de los presupuestos teóricos que conformaban la idea del Anillo Verde, espacio articulador (medioambiental, social y cultural) del territorio madrileño. ABSTRACT The Metropolitan Greenbelt was defined by the 1963 Master Plan for the Madrid Metropolitan Area (MMA), following established international models of urban development, as the structural framework of the MMA, the principal open space within its network of open spaces and a public area of recreation and contact with nature for the residents of Madrid. In reality, however, it ha become a reserve of land in which various alliances between the institutional authorities and the dominant social class have been operating on the margin of the original plan, exposing a scarcity of legal and cultural resources for the safeguarding of common interests, and in which the geographical and natural characteristics of the territory itself have come to play an influential role in the functional specialization and spatial segregation of the MMA. With that idea as its HYPOTHESIS, the aim of this THESIS is to demonstrate its reality. The first step in this is to delineate, temporally and spatially, the object of study; i.e. the Metropolitan Greenbelt2. The second is to contextualize historically and disciplinarily those theoretical ideas which conform to the greenbelt concept. The third is to acknowledge, locate and document the elements which have characterized the urban occupation of the Greenbelt and classify these according to the parameters of time, function, urban development and form, which in turn would enable the geography, use, instrumentation and form of its transformation to be analysed on a general metropolitan scale. The fourth step, as a method of verification, is an in-depth analysis of two representative settings within the metropolitan network: the municipality of Pozuelo de Alarcón and the Hortaleza-Barajas district. The content of the document is divided into three parts. Part I focuses on the study’s theoretical foundations, Part II establishes a line of argument at the metropolitan level and Part III examines the phenomenon from a municipal and urban perspective. The thesis, then, begins with a study of the greenbelt concept itself and its meaning, which is far more complex than the accepted instrumental dimension of limiting and containing urbanization in response to the growth of the industrial city of the early 20th century, and which is based on a decentralization of the traditional city. This wider purpose is the setting aside of a large reserved space to safeguard the natural and cultural values of the region and thereby achieve a balance between the city and its residents; that is to say, between man and the space he inhabits. The principal currents of thought in urban planning will then be examined. These have drawn upon a variety of disciplines (economics, sociology, geography, biology, ecology) to develop theories for establishing a new urban order according to the principles of social, economic and environmental equity, and have involved a constant interchange between Europe and the United States. Thus, the City Garden and Regionalist movements would clear the way for proposals such as Greater London and Great Berlin, Chicago and Washington, in which the greenbelt would play a fundamental role. The participation of our own country and the city of Madrid is also discussed, through regional models such as the Besteiro Plan and urban ones like the Bidagor Plan, direct forerunners of 1963’s General Organizational Plan for the Madrid Metropolitan Area, which would set into motion the organization of Madrid’s metropolitan growth. The line of argument followed in this thesis is two-fold: first, an examination of metropolitan development in keeping with the city model as defined in the various General Plans for the development of both the municipality of Madrid and the seven surrounding municipalities which have land designated for its Greenbelt; and second, an examination of this growth in relation to Regional Planning measures, is detailed on a smaller scale (municipal and district), where the conditioning factors affecting the land property structure and the network of biophysical units may be analysed in depth. The first of these is dealt with in Part II and organized into three chapters (4, 5 and 6). Chapter 4 is dedicated to the obligatory starting point of the geographical setting itself. The biophysical characteristics of the territories set aside for the Greenbelt, and which historically have played a role in the area’s exploitation, are described here. These range from expanses of Mediterranean woodland to the north and west of Monte del Pardo to the various types of farmland that have been adapted to the geological substratum and the contours of the terrain (gentle undulations of arkosic sediment in the north, and wide sandy and gypsiferous tableland in the south), as well as orchards planted in low valleys and along watercourses (the creeks of Monte Carmelo, Valdebebas, Quinto, Santo, Butarque, Meaques and Pozuelo). Once this physical reality ha been detailed, in Chapter 5 will examine the various city models proposed by urban planners, both regionally and municipally, in response to the confluence of social, economic and political interests that have characterized the process of occupation in the Greenbelt area during the construction of the MMA. Municipal planning proposals will be collected and examined for the various municipalities which have land designated for the Greenbelt: Madrid, Coslada, Getafe, Leganés, Alcorcón, Boadilla del Monte and Pozuelo de Alarcón. Furthermore, the various territorial organization proposals which have served as references for municipal planning will also be addressed here, in all of their versions –from the sectorial, which have met with more success and institutional approval, to the many attempts at integration, which have been more complex but less influential, precisely for the difficulty of reconciling physical organization with economic development, and private interest with public benefit. The first period in this process was the development of the General Plan of 1963, followed by the first municipal development plans of the 1970s, in which the need for a regional framework that “organized” the territory in an integral fashion was defined. This would serve as a reference for the sectorial actions that marked the metropolitan area’s initial development. The second came two decades later with the approval of the General Plan of 1985, and the network of municipal plans for the surrounding communities, which followed the same philosophy of austerity with regard to territorial growth. The third would begin to take form in 1997, as a new generation of neo-liberal development plans imposed a territorial model based on centralized large-scale metropolitan operations of infrastructure and equipment, which would indiscriminately consume the totality of Madrid’s land. At the end of the Part II, in Chapter 6, the metropolitan area will be represented graphically and the 229 pieces that have been gradually encroaching upon land designated for the Greenbelt will be analysed. This analysis will be carried out according to the parameters defined for the study, and the first general conclusions of the thesis will be based on its findings. It will show how alliances between the various governing authorities in the construction of the city and its environment have successively violated established plans with regard to the definitions of city and territory, how shortages of instrumental and judicial resources have accentuated the dismantling process, and how natural and geographical factors have influenced functional specialization and social segregation in the Madrid Metropolitan Area. The final step, detailed in Part III, will address two fundamental aspects of what has just been described: the lack of consideration for the cultural and environmental values which have shaped this territory and imprinted upon it a specific and unique character; and the structure of land domination, with a precise identification of the social group and agents responsible at each stage of the Greenbelt’s commercialization, who, under an umbrella of social urgency and deceptive public benefit, have used it to obtain substantial financial rewards. For this purpose, a closer look is taken at two specific areas: the municipality of Pozuelo de Alarcón, representative of the suburban growth of an elite population which has occupied the Greenbelt areas of the greatest ecological value; and the Hortaleza-Barajas district, which has offered its territory to large metropolitan business interests, based on activities centred on the connection between Madrid and Barcelona and the system of international air travel. Both of these settings are located to the north of the line which divides the Sierra from La Mancha, and thus occupy the most valuable land in the Madrid region (a functional structure anticipated by Bidagor in 1946, with his city model adapted to the territory of Madrid). Finally, an attempt will be made to interpret the phenomenon of metropolitan Greenbelt occupation, confirming initial hypotheses, specifying the environmental and cultural values that have been violated, and identifying the various players involved, as well as numerous urbanization operations of varying sizes and interests, and the instruments of planning they have used. It will be seen from this that the construction of the MMA has in fact followed a “spread” model, a “grease spot” (as Geddes calls it) which, from the outset of the planning process and according to the definition of a greenbelt as a construction-free zone, was precisely to be avoided. This structural role (to provide a balance between a city and its residents) has thus been abandoned and the Greenbelt converted instead into a communicative framework which, once consolidated, has become the greatest ally of the real estate machine. After this process of violating limits, norms and established behaviour has been described and solidly documented, a reflection will be made on the real influence of the Greenbelt proposal in the construction of the MMA. At the same time, new roles will be suggested for future planning, roles which are deliberate and long term, in opposition to the immediate and circumstantial. This will enable a new interpretation of the theoretical principles behind the greenbelt concept, a space designed to connect the territory of Madrid environmentally, socially and culturally.

Método experimental para la caracterización de las diferentes tecnologías de integración arquitectónica de la energía fotovoltaica en condiciones de funcionamiento real = Experimental method for characterization of several building integrated photovoltaic technologies under real working conditions

Hoy en día, el proceso de un proyecto sostenible persigue realizar edificios de elevadas prestaciones que son, energéticamente eficientes, saludables y económicamente viables utilizando sabiamente recursos renovables para minimizar el impacto sobre el medio ambiente reduciendo, en lo posible, la demanda de energía, lo que se ha convertido, en la última década, en una prioridad. La Directiva 2002/91/CE "Eficiencia Energética de los Edificios" (y actualizaciones posteriores) ha establecido el marco regulatorio general para el cálculo de los requerimientos energéticos mínimos. Desde esa fecha, el objetivo de cumplir con las nuevas directivas y protocolos ha conducido las políticas energéticas de los distintos países en la misma dirección, centrándose en la necesidad de aumentar la eficiencia energética en los edificios, la adopción de medidas para reducir el consumo, y el fomento de la generación de energía a través de fuentes renovables. Los edificios de energía nula o casi nula (ZEB, Zero Energy Buildings ó NZEB, Net Zero Energy Buildings) deberán convertirse en un estándar de la construcción en Europa y con el fin de equilibrar el consumo de energía, además de reducirlo al mínimo, los edificios necesariamente deberán ser autoproductores de energía. Por esta razón, la envolvente del edifico y en particular las fachadas son importantes para el logro de estos objetivos y la tecnología fotovoltaica puede tener un papel preponderante en este reto. Para promover el uso de la tecnología fotovoltaica, diferentes programas de investigación internacionales fomentan y apoyan soluciones para favorecer la integración completa de éstos sistemas como elementos arquitectónicos y constructivos, los sistemas BIPV (Building Integrated Photovoltaic), sobre todo considerando el próximo futuro hacia edificios NZEB. Se ha constatado en este estudio que todavía hay una falta de información útil disponible sobre los sistemas BIPV, a pesar de que el mercado ofrece una interesante gama de soluciones, en algunos aspectos comparables a los sistemas tradicionales de construcción. Pero por el momento, la falta estandarización y de una regulación armonizada, además de la falta de información en las hojas de datos técnicos (todavía no comparables con las mismas que están disponibles para los materiales de construcción), hacen difícil evaluar adecuadamente la conveniencia y factibilidad de utilizar los componentes BIPV como parte integrante de la envolvente del edificio. Organizaciones internacionales están trabajando para establecer las normas adecuadas y procedimientos de prueba y ensayo para comprobar la seguridad, viabilidad y fiabilidad estos sistemas. Sin embargo, hoy en día, no hay reglas específicas para la evaluación y caracterización completa de un componente fotovoltaico de integración arquitectónica de acuerdo con el Reglamento Europeo de Productos de la Construcción, CPR 305/2011. Los productos BIPV, como elementos de construcción, deben cumplir con diferentes aspectos prácticos como resistencia mecánica y la estabilidad; integridad estructural; seguridad de utilización; protección contra el clima (lluvia, nieve, viento, granizo), el fuego y el ruido, aspectos que se han convertido en requisitos esenciales, en la perspectiva de obtener productos ambientalmente sostenibles, saludables, eficientes energéticamente y económicamente asequibles. Por lo tanto, el módulo / sistema BIPV se convierte en una parte multifuncional del edificio no sólo para ser física y técnicamente "integrado", además de ser una oportunidad innovadora del diseño. Las normas IEC, de uso común en Europa para certificar módulos fotovoltaicos -IEC 61215 e IEC 61646 cualificación de diseño y homologación del tipo para módulos fotovoltaicos de uso terrestre, respectivamente para módulos fotovoltaicos de silicio cristalino y de lámina delgada- atestan únicamente la potencia del módulo fotovoltaico y dan fe de su fiabilidad por un período de tiempo definido, certificando una disminución de potencia dentro de unos límites. Existe también un estándar, en parte en desarrollo, el IEC 61853 (“Ensayos de rendimiento de módulos fotovoltaicos y evaluación energética") cuyo objetivo es la búsqueda de procedimientos y metodologías de prueba apropiados para calcular el rendimiento energético de los módulos fotovoltaicos en diferentes condiciones climáticas. Sin embargo, no existen ensayos normalizados en las condiciones específicas de la instalación (p. ej. sistemas BIPV de fachada). Eso significa que es imposible conocer las efectivas prestaciones de estos sistemas y las condiciones ambientales que se generan en el interior del edificio. La potencia nominal de pico Wp, de un módulo fotovoltaico identifica la máxima potencia eléctrica que éste puede generar bajo condiciones estándares de medida (STC: irradición 1000 W/m2, 25 °C de temperatura del módulo y distribución espectral, AM 1,5) caracterizando eléctricamente el módulo PV en condiciones específicas con el fin de poder comparar los diferentes módulos y tecnologías. El vatio pico (Wp por su abreviatura en inglés) es la medida de la potencia nominal del módulo PV y no es suficiente para evaluar el comportamiento y producción del panel en términos de vatios hora en las diferentes condiciones de operación, y tampoco permite predecir con convicción la eficiencia y el comportamiento energético de un determinado módulo en condiciones ambientales y de instalación reales. Un adecuado elemento de integración arquitectónica de fachada, por ejemplo, debería tener en cuenta propiedades térmicas y de aislamiento, factores como la transparencia para permitir ganancias solares o un buen control solar si es necesario, aspectos vinculados y dependientes en gran medida de las condiciones climáticas y del nivel de confort requerido en el edificio, lo que implica una necesidad de adaptación a cada contexto específico para obtener el mejor resultado. Sin embargo, la influencia en condiciones reales de operación de las diferentes soluciones fotovoltaicas de integración, en el consumo de energía del edificio no es fácil de evaluar. Los aspectos térmicos del interior del ambiente o de iluminación, al utilizar módulos BIPV semitransparentes por ejemplo, son aún desconocidos. Como se dijo antes, la utilización de componentes de integración arquitectónica fotovoltaicos y el uso de energía renovable ya es un hecho para producir energía limpia, pero también sería importante conocer su posible contribución para mejorar el confort y la salud de los ocupantes del edificio. Aspectos como el confort, la protección o transmisión de luz natural, el aislamiento térmico, el consumo energético o la generación de energía son aspectos que suelen considerarse independientemente, mientras que todos juntos contribuyen, sin embargo, al balance energético global del edificio. Además, la necesidad de dar prioridad a una orientación determinada del edificio, para alcanzar el mayor beneficio de la producción de energía eléctrica o térmica, en el caso de sistemas activos y pasivos, respectivamente, podría hacer estos últimos incompatibles, pero no necesariamente. Se necesita un enfoque holístico que permita arquitectos e ingenieros implementar sistemas tecnológicos que trabajen en sinergia. Se ha planteado por ello un nuevo concepto: "C-BIPV, elemento fotovoltaico consciente integrado", esto significa necesariamente conocer los efectos positivos o negativos (en términos de confort y de energía) en condiciones reales de funcionamiento e instalación. Propósito de la tesis, método y resultados Los sistemas fotovoltaicos integrados en fachada son a menudo soluciones de vidrio fácilmente integrables, ya que por lo general están hechos a medida. Estos componentes BIPV semitransparentes, integrados en el cerramiento proporcionan iluminación natural y también sombra, lo que evita el sobrecalentamiento en los momentos de excesivo calor, aunque como componente estático, asimismo evitan las posibles contribuciones pasivas de ganancias solares en los meses fríos. Además, la temperatura del módulo varía considerablemente en ciertas circunstancias influenciada por la tecnología fotovoltaica instalada, la radiación solar, el sistema de montaje, la tipología de instalación, falta de ventilación, etc. Este factor, puede suponer un aumento adicional de la carga térmica en el edificio, altamente variable y difícil de cuantificar. Se necesitan, en relación con esto, más conocimientos sobre el confort ambiental interior en los edificios que utilizan tecnologías fotovoltaicas integradas, para abrir de ese modo, una nueva perspectiva de la investigación. Con este fin, se ha diseñado, proyectado y construido una instalación de pruebas al aire libre, el BIPV Env-lab "BIPV Test Laboratory", para la caracterización integral de los diferentes módulos semitransparentes BIPV. Se han definido también el método y el protocolo de ensayos de caracterización en el contexto de un edificio y en condiciones climáticas y de funcionamiento reales. Esto ha sido posible una vez evaluado el estado de la técnica y la investigación, los aspectos que influyen en la integración arquitectónica y los diferentes tipos de integración, después de haber examinado los métodos de ensayo para los componentes de construcción y fotovoltaicos, en condiciones de operación utilizadas hasta ahora. El laboratorio de pruebas experimentales, que consiste en dos habitaciones idénticas a escala real, 1:1, ha sido equipado con sensores y todos los sistemas de monitorización gracias a los cuales es posible obtener datos fiables para evaluar las prestaciones térmicas, de iluminación y el rendimiento eléctrico de los módulos fotovoltaicos. Este laboratorio permite el estudio de tres diferentes aspectos que influencian el confort y consumo de energía del edificio: el confort térmico, lumínico, y el rendimiento energético global (demanda/producción de energía) de los módulos BIPV. Conociendo el balance de energía para cada tecnología solar fotovoltaica experimentada, es posible determinar cuál funciona mejor en cada caso específico. Se ha propuesto una metodología teórica para la evaluación de estos parámetros, definidos en esta tesis como índices o indicadores que consideran cuestiones relacionados con el bienestar, la energía y el rendimiento energético global de los componentes BIPV. Esta metodología considera y tiene en cuenta las normas reglamentarias y estándares existentes para cada aspecto, relacionándolos entre sí. Diferentes módulos BIPV de doble vidrio aislante, semitransparentes, representativos de diferentes tecnologías fotovoltaicas (tecnología de silicio monocristalino, m-Si; de capa fina en silicio amorfo unión simple, a-Si y de capa fina en diseleniuro de cobre e indio, CIS) fueron seleccionados para llevar a cabo una serie de pruebas experimentales al objeto de demostrar la validez del método de caracterización propuesto. Como resultado final, se ha desarrollado y generado el Diagrama Caracterización Integral DCI, un sistema gráfico y visual para representar los resultados y gestionar la información, una herramienta operativa útil para la toma de decisiones con respecto a las instalaciones fotovoltaicas. Este diagrama muestra todos los conceptos y parámetros estudiados en relación con los demás y ofrece visualmente toda la información cualitativa y cuantitativa sobre la eficiencia energética de los componentes BIPV, por caracterizarlos de manera integral. ABSTRACT A sustainable design process today is intended to produce high-performance buildings that are energy-efficient, healthy and economically feasible, by wisely using renewable resources to minimize the impact on the environment and to reduce, as much as possible, the energy demand. In the last decade, the reduction of energy needs in buildings has become a top priority. The Directive 2002/91/EC “Energy Performance of Buildings” (and its subsequent updates) established a general regulatory framework’s methodology for calculation of minimum energy requirements. Since then, the aim of fulfilling new directives and protocols has led the energy policies in several countries in a similar direction that is, focusing on the need of increasing energy efficiency in buildings, taking measures to reduce energy consumption, and fostering the use of renewable sources. Zero Energy Buildings or Net Zero Energy Buildings will become a standard in the European building industry and in order to balance energy consumption, buildings, in addition to reduce the end-use consumption should necessarily become selfenergy producers. For this reason, the façade system plays an important role for achieving these energy and environmental goals and Photovoltaic can play a leading role in this challenge. To promote the use of photovoltaic technology in buildings, international research programs encourage and support solutions, which favors the complete integration of photovoltaic devices as an architectural element, the so-called BIPV (Building Integrated Photovoltaic), furthermore facing to next future towards net-zero energy buildings. Therefore, the BIPV module/system becomes a multifunctional building layer, not only physically and functionally “integrated” in the building, but also used as an innovative chance for the building envelope design. It has been found in this study that there is still a lack of useful information about BIPV for architects and designers even though the market is providing more and more interesting solutions, sometimes comparable to the existing traditional building systems. However at the moment, the lack of an harmonized regulation and standardization besides to the non-accuracy in the technical BIPV datasheets (not yet comparable with the same ones available for building materials), makes difficult for a designer to properly evaluate the fesibility of this BIPV components when used as a technological system of the building skin. International organizations are working to establish the most suitable standards and test procedures to check the safety, feasibility and reliability of BIPV systems. Anyway, nowadays, there are no specific rules for a complete characterization and evaluation of a BIPV component according to the European Construction Product Regulation, CPR 305/2011. BIPV products, as building components, must comply with different practical aspects such as mechanical resistance and stability; structural integrity; safety in use; protection against weather (rain, snow, wind, hail); fire and noise: aspects that have become essential requirements in the perspective of more and more environmentally sustainable, healthy, energy efficient and economically affordable products. IEC standards, commonly used in Europe to certify PV modules (IEC 61215 and IEC 61646 respectively crystalline and thin-film ‘Terrestrial PV Modules-Design Qualification and Type Approval’), attest the feasibility and reliability of PV modules for a defined period of time with a limited power decrease. There is also a standard (IEC 61853, ‘Performance Testing and Energy Rating of Terrestrial PV Modules’) still under preparation, whose aim is finding appropriate test procedures and methodologies to calculate the energy yield of PV modules under different climate conditions. Furthermore, the lack of tests in specific conditions of installation (e.g. façade BIPV devices) means that it is difficult knowing the exact effective performance of these systems and the environmental conditions in which the building will operate. The nominal PV power at Standard Test Conditions, STC (1.000 W/m2, 25 °C temperature and AM 1.5) is usually measured in indoor laboratories, and it characterizes the PV module at specific conditions in order to be able to compare different modules and technologies on a first step. The “Watt-peak” is not enough to evaluate the panel performance in terms of Watt-hours of various modules under different operating conditions, and it gives no assurance of being able to predict the energy performance of a certain module at given environmental conditions. A proper BIPV element for façade should take into account thermal and insulation properties, factors as transparency to allow solar gains if possible or a good solar control if necessary, aspects that are linked and high dependent on climate conditions and on the level of comfort to be reached. However, the influence of different façade integrated photovoltaic solutions on the building energy consumption is not easy to assess under real operating conditions. Thermal aspects, indoor temperatures or luminance level that can be expected using building integrated PV (BIPV) modules are not well known. As said before, integrated photovoltaic BIPV components and the use of renewable energy is already a standard for green energy production, but would also be important to know the possible contribution to improve the comfort and health of building occupants. Comfort, light transmission or protection, thermal insulation or thermal/electricity power production are aspects that are usually considered alone, while all together contribute to the building global energy balance. Besides, the need to prioritize a particular building envelope orientation to harvest the most benefit from the electrical or thermal energy production, in the case of active and passive systems respectively might be not compatible, but also not necessary. A holistic approach is needed to enable architects and engineers implementing technological systems working in synergy. A new concept have been suggested: “C-BIPV, conscious integrated BIPV”. BIPV systems have to be “consciously integrated” which means that it is essential to know the positive and negative effects in terms of comfort and energy under real operating conditions. Purpose of the work, method and results The façade-integrated photovoltaic systems are often glass solutions easily integrable, as they usually are custommade. These BIPV semi-transparent components integrated as a window element provides natural lighting and shade that prevents overheating at times of excessive heat, but as static component, likewise avoid the possible solar gains contributions in the cold months. In addition, the temperature of the module varies considerably in certain circumstances influenced by the PV technology installed, solar radiation, mounting system, lack of ventilation, etc. This factor may result in additional heat input in the building highly variable and difficult to quantify. In addition, further insights into the indoor environmental comfort in buildings using integrated photovoltaic technologies are needed to open up thereby, a new research perspective. This research aims to study their behaviour through a series of experiments in order to define the real influence on comfort aspects and on global energy building consumption, as well as, electrical and thermal characteristics of these devices. The final objective was to analyze a whole set of issues that influence the global energy consumption/production in a building using BIPV modules by quantifying the global energy balance and the BIPV system real performances. Other qualitative issues to be studied were comfort aspect (thermal and lighting aspects) and the electrical behaviour of different BIPV technologies for vertical integration, aspects that influence both energy consumption and electricity production. Thus, it will be possible to obtain a comprehensive global characterization of BIPV systems. A specific design of an outdoor test facility, the BIPV Env-lab “BIPV Test Laboratory”, for the integral characterization of different BIPV semi-transparent modules was developed and built. The method and test protocol for the BIPV characterization was also defined in a real building context and weather conditions. This has been possible once assessed the state of the art and research, the aspects that influence the architectural integration and the different possibilities and types of integration for PV and after having examined the test methods for building and photovoltaic components, under operation conditions heretofore used. The test laboratory that consists in two equivalent test rooms (1:1) has a monitoring system in which reliable data of thermal, daylighting and electrical performances can be obtained for the evaluation of PV modules. The experimental set-up facility (testing room) allows studying three different aspects that affect building energy consumption and comfort issues: the thermal indoor comfort, the lighting comfort and the energy performance of BIPV modules tested under real environmental conditions. Knowing the energy balance for each experimented solar technology, it is possible to determine which one performs best. A theoretical methodology has been proposed for evaluating these parameters, as defined in this thesis as indices or indicators, which regard comfort issues, energy and the overall performance of BIPV components. This methodology considers the existing regulatory standards for each aspect, relating them to one another. A set of insulated glass BIPV modules see-through and light-through, representative of different PV technologies (mono-crystalline silicon technology, mc-Si, amorphous silicon thin film single junction, a-Si and copper indium selenide thin film technology CIS) were selected for a series of experimental tests in order to demonstrate the validity of the proposed characterization method. As result, it has been developed and generated the ICD Integral Characterization Diagram, a graphic and visual system to represent the results and manage information, a useful operational tool for decision-making regarding to photovoltaic installations. This diagram shows all concepts and parameters studied in relation to each other and visually provides access to all the results obtained during the experimental phase to make available all the qualitative and quantitative information on the energy performance of the BIPV components by characterizing them in a comprehensive way.

Environmental services of biodiversity.

Humans derive many utilitarian benefits from the environmental services of biotas and ecosystems. This is often advanced as a prime argument to support conservation of biodiversity. There is much to be said for this viewpoint, as is documented in this paper through a summary assessment of several categories of environmental services, including regulation of climate and biogeochemical cycles, hydrological functions, soil protection, crop pollination, pest control, recreation and ecotourism, and a number of miscellaneous services. It is shown that the services are indeed significant, whether in ecological or economic senses. Particularly important is the factor of ecosystem resilience, which appears to underpin many of the services. It should not be supposed, however, that environmental services stem necessarily and exclusively from biodiversity. While biodiversity often plays a key role, the services can also derive from biomass and other attributes of biotas. The paper concludes with a brief overview assessment of economic values at issue and an appraisal of the implications for conservation planning.