Comparisons of open boundary conditions in a barotropic model of the northern Arabian Sea

These simulations are focused on the sensitivity of the barotropic ocean non-linear model to the various open boundary conditions (OBCs). Different OBCs from gradient to radiation condition are examined to determine the best result and help to choose the most appropriate OBCs. Since the interior points are changing with time both implicit and explicit forms are applied. The simulations showed that the interior flow is sensitive to changes in the OBCs and the results are highly dependent on the bathymetry of the area. When a constant depth (100m) is used, the circulation pattern with all OBCs is same. The best boundary conditions are Orlanski Radiation and its modified form. These boundary conditions produce identical adjustment in velocity and are determined to be satisfactory for both constant depth and actual bathymetry.

Unified circuit model for the polysilicon TFT

This paper proposes two methods to improve the modelling of thin film transistors (TFTs). The first involves integrating Poissons equation numerically, given a density of trap states and other relevant material parameters including a constant mobility. Theresult is conductance as a numerical function of gate voltage. The second method recognizes that the data for areal conductance found by numerical integration, may easily be found by measurement without making assumptions about the density of trap states.

A unified circuit model for the polysilicon thin film transistor

This paper describes a unified approach to modelling the polysilicon thin film transistor (TFT) for the purposes of circuit design. The approach uses accurate methods of predicting the channel conductance and then fitting the resulting data with a polynomial. Two methods are proposed to find the channel conductance: a device model and measurement. The approach is suitable because the TFT does not have a well defined threshold voltage. The polynomial conductance is then integrated generally to find the drain current and channel charge, necessary for a complete circuit model. © 1991 The Japan Society of Applied Physics.

Accurate GTO model for circuit simulations

The GTO model presented in this paper uses analytical expressions to describe the internal physics of the device. It has been implemented to run as compiled code in the SPICE simulation package and as a MAST template in the Saber simulator. A rigorous comparison of measured simulated waveforms and performance parameters (including turn-off energies) for a 3000A device is described and discussed.

Numerical analysis of the coupled circuit and cooling holes for an electromagnetic shaker

This paper presents a time-stepping shaker modeling scheme. The new method improves the accuracy of analysis of armature-position-dependent inductances and force factors, analysis of axial variation of current density in copper plates (short-circuited turns), and analysis of cooling holes in the magnetic circuit. Linear movement modeling allows armature position to be precisely included in the shaker analysis. A more accurate calculation of eddy currents in the coupled circuit is in particular crucial for the shaker analysis in a mid-or high-frequency operation range. Large currents in a shaker, including eddy currents, incur large Joule losses, which in turn require the use of a cooling system to keep temperature at bay. Sizable cooling holes have influence on the saturation state of iron poles, and hence have to be properly taken into account.

Destruction-free parameter extraction for a physics-based circuit simulator IGCT model

This paper presents a practical destruction-free parameter extraction methodology for a new physics-based circuit simulator buffer-layer Integrated Gate Commutated Thyristor (IGCT) model. Most key parameters needed for this model can be extracted by one simple clamped inductive-load switching experiment. To validate this extraction method, a clamped inductive load switching experiment was performed, and corresponding simulations were carried out by employing the IGCT model with parameters extracted through the presented methodology. Good agreement has been obtained between the experimental data and simulation results.

A CMOS analogue predistortion circuit for wideband optical fibre links

The laser is a major source of nonlinearity for optical fibre communication systems. In this paper, we propose a CMOS analogue predistortion circuit to reduce laser nonlinearity for wideband optical fibre links. The circuit uses a nonlinearity having the inverse transfer characteristic of the directly modulated vertical cavity surface emitting laser (VCSEL). It is shown by post-layout simulation that the predistortion circuit shows 12dBm improvement in the optical fibre system. The optical fibre transmitter front-end with predistortion lineariser is being fabricated using the austriamicrosystems (AMS) 0.3 5μm CMOS technology.

How do large multinational companies implement open innovation?

This paper addresses a major gap in reported research on open innovation (OI): how do companies implement open innovation? To answer this question a sample of 43 cross-sector firms were reviewed for their OI implementation approaches. The study analyzed how firms moved from practising closed to open innovation, classifying the adoption path according to the impetus for the adoption of the OI paradigm and the coordination of the OI implementation. The way firms adopted OI was found to vary according to (1) their innovation requirements, (2) the timing of the implementation and (3) their organizational culture. © 2011 Elsevier Ltd. All rights reserved.

Structural features of geostrophic circulation in open region of the South China Sea

On the basis of observation data of water temperature and salinity the mean seasonal geostrophic circulation in open region of the South China Sea (SCS) was computed by the dynamic method relative to the 800 decibar reference surface. The results of computation let go to following notices: In both main monsoons (winter and summer) there are two main geostrophic eddies: the anticlockwise eddy in the northern and northwestern part, and the clockwise eddy in the southern part of the SCS with corresponding divergent and convergent zones. The main frontal zones go along the middle latitudes of the sea from the southern continental shelf of Vietnam to the area west of Luzon Island. The strength and stability of the current in winter are higher than in summer. The Kuroshio has an enough strong branch intruding into the SCS through Bashi Strait in winter creating in the sea the water structure similar to that of the Northwest Pacific subtropical and tropical regions. In summer the Kuroshio water can intrude directly only into the area southwest of Taiwan.

Integrated cage-cum-pond culture systems with high valued climbing perch (Anabas testudineus) in cages and low-valued carps in open ponds

An on-farm trial was conducted over 150 days to determine appropriate stocking ratio, growth and production of climbing perch (Anabas testudineus) in cages and carps in open water of ponds in eighteen farmers' ponds from Haluaghat Upazila at Mymensingh district of Bangladesh. One or two 1 m super(3) cage was suspended in each of 12 earthen ponds and other 6 ponds served as control without cages. Climbing perch of 2-3 g in size were stocked in cages while fingerlings of silver carp (Hypophthalmicthys molitrix), catla (Catla catla), rohu (Labeo rohita), mirgal (Cirhinus cirrhosus), rajputi (Puntius sarana) and common carp (Cyprinus carpio) were stocked at 1 fish/m super(2) with a species ratio of 5:4:4:4:2:1 in open water of all ponds to give cage to open-pond fish ratios of 1:1 (T sub(1:1)) and 2:1 (T sub(2:1)) and 0:1 (T sub(0:1)) as three treatments with six replicates each. Survival of climbing perch was higher in T sub(1:1) (61.67%) than that of T sub(2:1) (29.5%) and was significantly different (p>0.05) between the treatments. Stocking of small size climbing perch fry increased the mortality rate in cages. The net yields of Thai koi were 0.13±0.01 (t/ha) and 0.10±0.01 (t/ha) in treatments T sub(1:1) and T sub(2:1), respectively and both were significantly different (p>0.05). Survival of-open-pond carps was high, ranging from 50 to 91.67% with significantly lower in T sub(0:1) than that of T sub(1:1) and T sub(2:1) treatment. Net and gross yield of each carp species were significantly higher in the T sub(1:1) and T sub(2:1) treatment than that in T sub(0:1) treatment. Net revenues were positive but low in all treatments. Therefore, bigger size climbing perch with lower stocking ratio (T sub(1:1)) is suitable for integrated cage-pond culture of climbing perch and carps. However, more on-farm trials in different ecosystem with scientific interventions are necessary to develop the technology for further dissemination among the rural farmers.

Telemetric recordings of single neuron activity and visual scenes in monkeys walking in an open field

This paper describes a portable recording system and methods for obtaining chronic recordings of single units and tracking rhesus monkey behavior in an open field. The integrated system consists of four major components: (1) microelectrode assembly; (2) h