Energy analysis of the construction of office buildings /by Graham J. Treloar

Buildings have a significant impact on the environment due to the energy required for the manufacture of construction materials. The method of assessing the energy embodied in a product is known as energy analysis. Detailed office building embodied energy case studies are very rare. However, there is evidence to suggest that the energy requirements for the construction phase of commercial buildings, including the energy embodied in materials, is a significant component of the life cycle energy requirements. This thesis sets out to examine the current state of energy analysis, determine the national average energy intensities < i.e. embodied energy rates < for building materials and assess the significance of using national average energy intensities for the energy analysis of a case study office building. Likely ranges of variation in the building material embodied energy rates from the national averages are estimated and the resulting distribution for total embodied energy in the case study building simulated. Strategies for improving the energy analysis methods and data are suggested. Detailed energy analysis is shown to be a useful indicative method of quantifying the energy required for the construction of buildings.

Spurious precision : variability in procedural validity of diagnostic procedures in psychotic disorders and implications for research and treatment

Very few studies have quantified the level of agreement among alternative diagnostic procedures that use a common set of fixed operational criteria. The authors examined the procedural validity of four independent methods of assigning DSM-III-R diagnoses of psychotic disorders. METHOD: The research was conducted as a satellite study to the DSM-IV Field Trial for Schizophrenia and Related Psychotic Disorders. The setting was the National Health and Medical Research Council Schizophrenia Research Unit's Early Psychosis Prevention and Intervention Centre, which focuses on first-episode psychosis. Consecutively admitted patients (N = 50) were assessed by independent raters who used four different procedures to determine a DSM-III-R diagnosis. These procedures were 1) the diagnostic instrument developed for the DSM-IV field trial, 2) the Royal Park Multidiagnostic Instrument for Psychosis, 3) the Munich Diagnostic Checklists, and 4) a consensus DSM-III-R diagnosis assigned by a team of clinician researchers who were expert in the use of diagnostic criteria. RESULTS: Concordance between pairs of diagnostic procedures was only moderate. Corresponding levels of percent agreement, however, ranged from 66% to 76%, with converse misclassification rates of 24%-34% (assuming one procedure to be "correct"). CONCLUSIONS: These findings have significant research and clinical implications. Despite the introduction of operationally defined diagnoses, there remained an appreciable level of differential classification or misclassification arising from variability in the method of assigning the diagnostic criteria rather than the criteria themselves. Such misclassification may impede neurobiological research and have harmful clinical effects on patients with first-episode psychosis.

Invisible labour : home–school relations and the front office

When school front offices are mentioned in research on schools and their relations with the community, it is often to describe how parents/carers and the public are treated officiously and/or inappropriately. In professional development materials, schools are urged to improve communication, and occasionally directed to consider the practices of the front office staff. Yet when schools send out information to parents/carers, the school office is usually the place to which all queries are directed. However, there is almost no detailed research that looks at what actually happens in this place. In this paper we draw on a small-scale commissioned research project which began to fill this gap. In seeking to reread our data and push further on analysis, we have come to realize that those who work in school front offices are women whose physical and emotional labour is not only rendered largely invisible in a wide range of literatures relating to home-school relations but is also inadequately recognized through recruitment practices, professional development and remuneration. We suggest that there needs to be further research into the high energy, multitasking, nurturing work that goes on in school front offices.

Energy and thermal comfort in a rammed earth office building

An analysis was made of the Charles Sturt University Academic Office building at Thurgoona from a thermal comfort and energy viewpoint. It was found that the offices did not meet low energy criteria and some were uncomfortable for 30% to 85% of occupied hours.

Investigation into the design and development of the Toad Interactive Multimedia Program (TIMMP) and its use by first year biology undergraduates learning dissection procedures and in situ functional anatomy

Investigates how first year biology undergraduates learn dissection when they have access to such interactive multimedia technology. Related design and developmental factors were evaluated in relation to how they helped students learn the content in the multimedia program. Through the use of interactive technology students can learn at their own pace without the need for actual animal dissection.

Criminal processes and investigative procedures : Victoria and Commonwealth

This book is designed to be a useful and practical tool for both students and legal practitioners alike. In addition to focusing on the recently enacted Criminal Protective Act 2009, this text also highlights other key aspects of the criminal processes.

The psychological and physical needs of workers impacting office design

Office design needs to be based on the needs of the most important producers of profit and value for any organisation – the workforce. Drivers affecting office design have been economics – space being often viewed as a cost-centre rather than a business enabler; and more recently, ideas that office design can impact organisational culture – resulting in the adoption of more collaborative working spaces in an attempt to force interaction. What is not always considered are the actual working styles
of the individuals and their motivations nor the requirements of the work itself. There is a need to profile not only the workforce, but also the work carried out. Recent research into space requirements for work is reviewed and reported with recommendations for better consideration of the psychological and physical needs of workers for office design.

Balancing comfort expectations and greenhouse gas emissions, thermal comfort in office buildings in a changing climate

According to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change (IPCC), the construction sector has the greatest potential for climate change mitigation. This work investigates the potential for climate change mitigation in naturally ventilated and mixed mode office buildings, by evaluating the range of influence of building design and occupants on greenhouse gas emissions as well as thermal and visual comfort.

Thermal comfort is evaluated according to the EN 15251 adaptive thermal comfort model, visual comfort is based on daylight autonomy and view. Parametric studies have been conducted based on building simulation for the climate of Athens, Greece. Input data are based on a literature review, and on results from a field study conducted among office occupants and architects in Athens.

The results show that the influence of occupants on greenhouse gas emissions is larger than the influence of building design. Energy saving office equipment, as well as active use of building controls for shading and lighting by occupants are crucial parameters regarding the reduction of CO2 emissions. In mixed mode buildings, the coefficient of performance of the cooling system is an important parameter as well. Regarding thermal and visual comfort, the influence of building design is predominant. A green building, well protected against heat from the sun and able to balance solar and internal heat gains, provides higher comfort levels and is less affected by the influence of occupants. In mixed mode buildings, building design is the predominant influence on the magnitude of cooling loads. A hot summer including heat waves can significantly reduce thermal comfort and increase the resulting greenhouse gas emissions. Green buildings are least affected by these influences.

The EN 15251 adaptive thermal comfort model provides a thermal comfort evaluation method valid throughout Europe. However, for the Mediterranean climate of Athens, Greece, most of the configurations investigated within this study do not meet the requirements according to this model. EN 15251 refers to an adaptive thermal comfort model for naturally ventilated and to a static model for mechanically ventilated buildings. For mixed mode buildings, the static model is recommended, but literature indicates that occupants in those buildings might be more tolerant towards higher temperatures. The hypothetical application of the EN 15251 adaptive thermal comfort model in mixed mode offices, as investigated in this study, shows potential for greenhouse gas emission savings. However, this influence is small compared to that of building design and occupants. Conclusions are drawn regarding the categorisation and exceeding criteria according to EN 15251 adaptive thermal comfort model for offices in a Mediterranean climate.

The results of this work show, that not only green buildings, but also green occupants can significantly contribute to the mitigation of the climate change. Mechanisms of the real estate market as well as the lifestyle of occupants are important influences in this context. Sustainability therefore refers to finding the right balance between occupant’s comfort expectations and resulting greenhouse gas emissions for a specific building, rather than optimisation of single parameters

The business case for sustainable office buildings

The market for sustainable buildings has rapidly gained momentum in the design and construction phases, however it appears that development and investment in these buildings by the private sector is limited. This is further complicated by the limited information available confirming the financial viability of sustainable buildings, with relatively little research conducted into the relationship between sustainability and the market value of commercial buildings. Currently the demand for sustainable buildings in Australia and New Zealand is being encouraged through government legislation and policy, where investment by the private sector has been relatively slow to develop due to the lack of evidential proof of the economic viability of sustainable buildings. Clearly if the progress and uptake of sustainable buildings is to develop within the property market, it is essential that the relationship between market value and sustainability should be understood in order to fully inform the investment industry.

Defect assessment procedures for high temperature applications : final report TW5-TTMS-005, D5

The objective of this task is to develop the high temperature part of a design code for fusion reactor components build from EUROFER. This development includes fracture mechanical rules for the assessment of detected defects under creep and creep–fatigue conditions. The assessment procedures R5, R6, JNC, A16, Partial Safety Factors were investigated and tested. As the most suitable procedure is chosen R5 and it is further verified by comparison with finite element simulations using the EUROFER material data. These simulations consist of evaluation of C(t) parameter for several geometries (CT specimen,cylinder with fully circumferential crack subjected to the internal pressure, cylinder with semi–elliptical circumferential crack subjected to the internal pressure and Mock-Up test blanket module (TBM) geometry). The R5 procedure provides very good accordance with FE simulations and it is suitable for lifetime assessment. Therefore the guide for R5 application is implemented in the report.

Sustainability and within use office building adaptations : a comparison of Dutch and Australian practices

Local Authorities worldwide are encouraging adaptation as a means of reducing building related urban energy consumption and greenhouse gas emissions. The City of Melbourne is promoting the retrofit of 1,200 CBD properties before 2020 with sustainability measures as part of their policy to become a carbon neutral city. Australian cities date from 1837 to the present day whereas some European cities have been inhabited for over two millennia. The concepts of adaptation and evolution of buildings and suburbs is well developed in Europe, though the scale of some of the post war developments has created different forms of building perhaps less adaptable or suited to change. The need to adapt buildings and to reduce environmental footprints becomes more pressing over time as global concentrations of carbon dioxide increase. Is it possible for Europeans to learn from Australian practices and vice averse? Through examination of office building adaptation in Melbourne and Amsterdam, it is possible to learn where similarities and differences exist and where new practices can be shared.

This paper addressed the questions; What are the key attributes influencing adaptations in Melbourne and Amsterdam office buildings, and what are the similarities and differences? Using the Melbourne CBD and Amsterdam as a case study, the research analysed 7393 commercial building adaptations in Melbourne and 98 office buildings in Amsterdam where adaptations were completed. The outcomes of this research show where similarities and differences exist and are relevant to all urban areas where adaptation of existing office buildings can mitigate the impacts of climate change and enhance the city for another generation of citizens and users.

User satisfaction in sustainable office buildings : a preliminary study

Energy efficiency was first mandated for commercial buildings in 2006 in Part J of The Building Code of Australia (BCA) and regulators are already implementing increased measures in 2010 (ABCB 2010). Further increases will follow as part of the co-ordinated effort to reduce building related greenhouse gas emissions. The introduction of the Energy Efficiency Disclosure Bill 2010 will establish a national scheme to promote the disclosure of information about the energy efficiency of office buildings as well as further highlighting the need for efficiency. Increased energy efficiency in the form of insulation, energy efficient light fittings, sophisticated Building Management Systems (BMS), micro-generation such as solar and wind turbines all result in measurable quantifiable reductions in operating costs for owners and tenants. However convincing all building owners about the sound business case for adopting sustainability measures has not been fully realised. To-date the adoption of cutting edge sustainable buildings in Australia is restricted to a few industry leaders, such as Investa and ISPT in Victoria for example. Sustainable building owners and tenants often benefit from reduced operating costs during the building lifecycle although the ‘intangible’ effect on businesses (e.g. employee productivity) is uncertain. This aspect has not been accurately quantified and has not been included as part of the measurement of sustainability in buildings.

This study will allow property stakeholders, including government policy-makers and investors/developers, to better understand the optimal type and level of sustainability to be incorporated into the built environment. In addition this knowledge will enable policymakers to make more informed decisions with regards to the likely impact of the legislative measures they propose in respect of sustainability and buildings in The Building Code of Australia (BCA) and other relevant legislation.

Elves processing Christmas orders in an office SFX

A sound design that animates elves working in an office processing Christmas orders.