Effects of Pig Slurry Application and Crops on Phosphorus Content in Soil and the Chemical Species in Solution

The application of pig slurry rates and plant cultivation can modify the soil phosphorus (P) content and distribution of chemical species in solution. The purpose of this study was to evaluate the total P, available P and P in solution, and the distribution of chemical P species in solution, in a soil under longstanding pig slurry applications and crop cultivation. The study was carried out in soil columns with undisturbed structure, collected in an experiment conducted for eight years in the experimental unit of the Universidade Federal de Santa Maria (UFSM), Santa Maria (RS). The soil was an Argissolo Vermelho distrófico arênico (Typic Hapludalf), subjected to applications of 0, 20, 40, and 80 m3 ha-1 pig slurry. Soil samples were collected from the layers 0-5, 5-10, 10-20, 20-30, 30-40, and 40-60 cm, before and after black oat and maize grown in a greenhouse, for the determination of available P, total P and P in the soil solution. In the solution, the concentration of the major cations, anions, dissolved organic carbon (DOC), and pH were determined. The distribution of chemical P species was determined by software Visual Minteq. The 21 pig slurry applications increased the total P content in the soil to a depth of 40 cm, and the P extracted by Mehlich-1 and from the solution to a depth of 30 cm. Successive applications of pig slurry changed the balance between the solid and liquid phases in the surface soil layers, increasing the proportion of the total amount of P present in the soil solution, aside from changing the chemical species in the solution, reducing the percentage complexed with Al and increasing the one complexed with Ca and Mg in the layers 0-5 and 5-10 cm. Black oat and maize cultivation increased pH in the solution, thereby increasing the proportion of HPO42- and reducing H2PO4- species.

Potential of Spectroradiometry to Classify Soil Clay Content

ABSTRACT Diffuse reflectance spectroscopy (DRS) is a fast and cheap alternative for soil clay, but needs further investigation to assess the scope of application. The purpose of the study was to develop a linear regression model to predict clay content from DRS data, to classify the soils into three textural classes, similar to those defined by a regulation of the Brazilian Ministry of Agriculture, Livestock and Food Supply. The DRS data of 412 soil samples, from the 0.0-0.5 m layer, from different locations in the state of Rio Grande do Sul, Brazil, were measured at wavelengths of 350 to 2,500 nm in the laboratory. The fitting of the linear regression model developed to predict soil clay content from the DRS data was based on a R2 value of 0.74 and 0.75, with a RMSE of 7.82 and 8.51 % for the calibration and validation sets, respectively. Soil texture classification had an overall accuracy of 79.0 % (calibration) and 80.9 % (validation). The heterogeneity of soil samples affected the performance of the prediction models. Future studies should consider a previous classification of soil samples in different groups by soil type, parent material and/or sampling region.

Hydrogen isotope fractionations between amphiboles, micas, and fluids in alkaline igneous intrusions

RÉSUMÉ DE LA THÈSE Les teneurs des amphiboles en éléments majeurs et en isotopes stables ont été analysées dans plusieurs complexes ignés alcalins et hyperalcalins, dans le but de déterminer l'importance des variations de composition des minéraux pour le fractionnement isotopique de l'hydrogène dans un système naturel minéral-magma-fluide. Cette étude se concentre principalement sur les syénites néphéliniques de complexes intrusifs alcalins bien connus mais à chimie variable, dont les amphiboles, ainsi que d'autres silicates hydratés tels que micas et eudialytes, lorsque cela était possible, ont été séparés. L'intérêt principal s'est porté sur le complexe alcalin d'Ilímaussaq de la Province du Gardar, au Sud du Groenland. Dans une optique de comparaison, nous avons collecté et analysé d'autres échantillons provenant du complexe de Tugtutôq (Sud Groenland), des complexes de Khibina et Lovozero (Péninsule de Kola, Russie), du Mont St-Hilaire et du Mont Royal (Canada) et de 6 autres du nord-ouest de la Namibie (Cape Cross, Okenyenya, Messum, Etaneno, Kalkfeld,et Okorusu). Les compositions isotopiques de l'hydrogène des amphiboles des ces différentes zones présentent de grandes variations (-227 à -700/00), ce qui est atypique pour des magmas d'origine mantellique. Les valeurs comprises entre -80 et -400/00 indiquent une provenance du manteau. Ces larges variations de compositions ainsi que l'extrême appauvrissement en isotope lourd de l'hydrogène (D), en comparaison avec d'autres roches ignées, semblent être propres.aux roches alcalines et hyperalcalines de ce type, ce qui indiquerait un processus commun. Les différents complexes alcalins choisis présentent un large intervalle de composition chimique des amphiboles. La caractérisation des amphiboles par microscopie électronique et par spectroscopie Mössbauer contribuent à observer le contrôle du Fe sur le fractionnement des isotopes de l'hydrogène. En effet, cela a mis en évidence un contrôle du Fe sur le fractionnement et même, dans le cas du complexe hyperalcalin d'Ilímaussaq, une relation entre le rapport Fei3+/FeT et les variations du rapport D/H. Les complexes étudiés diffèrent de par leur index agpaïtique (Na+K/Al) et également de par leur contenu en fer. Les plus hautes valeurs en Fe (27-35 wt%) et en éléments alcalins dans les amphiboles, ainsi que les teneurs de D/H les plus basses et leur grande variation, sont celles du complexe d'Ilímaussaq. Les amphiboles de la Péninsule de Kola et du Canada sont similaires, mais toutefois moins appauvries en D. En ce qui concerne les amphiboles des complexes du NO de la Namibie, elles présentent des compositions isotopiques de l'hydrogène magmatiques normales (-73 à -100 0/00), contiennent moins de Fe (15-17 wt%) et sont fortement enrichies en Ca et moins en Na. Dans ce cas, l'alcalinité est moins importante en comparaison des autres complexes étudiés. En dehors des teneurs en éléments alcalins des amphiboles, l'alcalinité des fluides s'avère également un facteur important, ce qui est cohérent avec certaines suggestions à partir de systèmes expérimentaux. Afin de mieux contraindre ce facteur, des expériences d'échanges hydrothermaux entre les amphiboles et les fluides de salinité différente ont été effectuées en simulant des conditions naturelles. L'approximation d'amphiboles naturelles de complexes ignés alcalins, couplée aux expériences d'échange, aide à préciser les facteurs contrôlant le fractionnement des isotopes de l'hydrogène dans les roches alcalines. Les valeurs extrêmement basses de 3D des amphiboles de ces complexes alcalins peuvent être dues à une combinaison de différents facteurs, telles qu'une haute alcalinité, une haute teneur en Fe et une faible profondeur d'intrusion. Les grandes variations ainsi que les faibles valeurs de SD des amphiboles étudiées peuvent résulter d'un processus magmatique interne et il est peu probable que de l'eau météorique soit impliquée et/ou que le dégazage magmatique ait joué un rôle. THESIS ABSTRACT Major element and stable isotope compositions of amphiboles were analyzed from a number of alkaline and peralkaline igneous complexes in order to determine the importance of compositional variations in minerals to hydrogen isotope fractionations in natural mineral-melt-fluid systems. The thesis mainly focuses on nepheline syenites of well-studied, but chemically variable alkaline intrusive rocks, from which amphiboles and, if possible, other hydrous silicates such as micas and eudialytes were separated. The system of primary interest was the alkaline Ilímaussaq Complex of the Gardar Province of South Greenland. For the purpose of comparison additional samples were collected and examined from the Tugtutôq Complex (South Greenland), the Khibina and Lovozero Complexes (Kola Peninsular, Russia), Mount St-Hilaire and Mount Royal (Canada) and six further complexes from NW Namibia (Cape Cross, Okenyenya, Messum, Etaneno, Kalkfeld, and Okorusu). The hydrogen isotope compositions of amphiboles from the localities studied differ greatly, which is atypical for amphiboles from mantle, range between - 227 and - 700/00 (latter compatible with a simple mantle origin). As this wide range in compositions and the extreme depletion in the heavy hydrogen isotope (D) content relative to other igneous rocks appear to be unique to alkaline to peralkaline rocks of this type, a common process is indicated. The different alkaline complexes chosen cover a wide range of amphibole chemical compositions. Detailed chemical characterization of amphiboles by electron microprobe and Mössbauer spectroscopy analyses helped to constrain the control of Fe on the H-isotope fractionations. Complete characterization of the chemical compositions of the amphiboles support Fe-control on fractionations and at least for the peralkaline Ilímaussaq complex a relationship between Fe3+/FeT ratios and variations in D/H. The studied complexes differ in their agpaitic index (Na+K/Al) and also in their Fe-content. The most iron (27-35 wt. %) and alkaline element rich amphiboles, with the lowermost D/H ratio, as well with very wide range, are the ones from Ilímaussaq complex. Similar, but less D depleted amphiboles are from the Kola Peninsula and the Canadian localities. The complexes described from NW Namibia have amphiboles with normal magmatic hydrogen isotope composition (-730/00 to -1000/00), and have less Fe-content (15-17 wt. %), and are more Ca-and less Na-rich. In this case alkalinity is not that important in comparison to the other studied complexes. Beside the alkaline element contents in the amphiboles, the alkalinity of the fluids has been found to be an important factor, in conjunction with earlier suggestions from experimental systems. To further constrain this factor, hydrothermal exchange experiments between amphiboles and fluids of different salinity simulating natural conditions were performed. The approach of examining natural amphiboles from alkaline igneous complexes in parallel to performing exchange experiments - helped to further constrain the factors controlling the H-isotope fractionations in alkaline rocks. The observed changes between the hydrogen and oxygen isotope compositions of amphiboles and fluids before and after the experiments suggest that another phase was produced during the experiments, which influenced the final hydrogen isotope composition of the system. This presumably hydrous phase has also influenced the Fe3 +/Fe2+ ratio of the amphiboles, which became more oxidized. The extremely low SD values of amphiboles in these alkaline complexes may be due to a combination of different factors such as high alkalinity, high Fe-content, and shallow intrusion depths. This wide range and the low SD values of the amphiboles studied might be a result of internal, magmatic processes and it is unlikely that meteoric water was involved and/or magmatic degassing played an important role. RÉSUMÉ DE LA THÈSE (pour le grand public) Fractionnement isotopique de l'hydrogène entre amphiboles, micas et fluides dans des intrusions alcalines Zsófia Wáczek Directeur de thèse, Prof. Torsten W. Vennemann Institut de Minéralogie et Géochimie, Université de Lausanne Les roches alcalines et celles qui leurs sont associées sont des sources importantes de nombreux minéraux et minerais, tels l'apatite, le niobium, le diamant et autres pierres précieuses. Cette étude se concentre sur des complexes alcalins localisés dans le sud du Groenland, au Canada, dans la péninsule de Kola en Russie et au nord-ouest de la Namibie. Ces complexes sont composés de roches ayant cristallisé à partir de magmas et de fluides très enrichis en alcalins. Cet enrichissement permet la précipitation de minéraux inhabituels riches en potassium et/ou sodium, telles les amphiboles sodiques, également enrichies en fer. Les amphiboles étudiées ont des compositions calciques, sodi-calciques et sodiques, qui reflètent leurs différents environnements de formation. Des études précédentes ont révélé une large gamme de rapports isotopiques de l'hydrogène dans les amphiboles de roches hyperalcalines, dont certains extrêmement bas. Cette variation importante est très intrigante, sachant que des valeurs entre -40 et -800/00 correspondent à des silicates ignés hydratés et non altérés, alors que des valeurs descendant jusqu'a -1500/00 nécessiteraient une altération par de l'eau météorique et/ou une contamination par les roches environnantes ou des sédiments riches en matière organique. Dans lé cas précis du complexe d'Ilímaussaq (sud du Groenland), aucune de ces explications n'a pu être démontrée et des valeurs encore plus faibles ont été trouvées. Le complexe d'Ilímaussaq présente des valeurs de rapport isotopique de l'hydrogène entre -227 et -500/00 dans les amphiboles. Une origine mantellique permet d'expliquer les valeurs élevées, mais d'autres processus doivent entrer en jeu pour engendrer les valeurs les plus négatives. C'est à l'identification de ces processus que nous nous sommes attachés dans ce travail. Les grandes variations observées dans les teneurs en fer et dans le rapport Fe3+/FeT des roches et des minéraux de ces complexes sont corrélées avec d'autres paramètres chimiques, tels que la composition isotopique de l'hydrogène dans les amphiboles. Nous avons dès lors abordé les questions suivantes: quelle est la relation entre la teneur en fer des amphiboles et leur composition isotopique? Que nous apprennent les changements de la teneur en fer et les changements dans le rapport Fe3+/FeT sur les processus pétrologiques dans ces roches? Pour répondre à ces questions, nous avons analysé les compositions isotopiques de l'oxygène et de l'hydrogène dans les amphiboles et d'autres silicates hydratés. La composition chimique et le rapport Fe3+/FeT des amphiboles ont également été déterminés. Des expériences hydrothermales simulant des conditions naturelles ont été entreprises afin de mieux comprendre les processus de fractionnement isotopiques dans ces systèmes très alcalins. Nos conclusions sont les suivantes: (1) Les valeurs extrêmement faibles ainsi que les larges variations des rapports isotopiques de l'hydrogène des amphiboles de ces complexes alcalins sont dues à une combinaison de facteurs tels que la forte alcalinité, la haute teneur en fer et la profondeur très faible de l'intrusion. (2) Ces valeurs sont probablement le résultat de processus magmatiques internes. (3) Il est peu probable que les eaux météoriques et/ou le dégazage magmatique aient joué un rôle lors de la formation de ces amphiboles. (4) Certaines corrélations, en accord avec les études précédentes, ont pu être trouvées au niveau des concentrations en fer. (5) Dans le cas du complexe d'Ilímaussaq exclusivement, une relation a été trouvée entre le rapport Fe3+/FeT et la composition isotopique de l'hydrogène des amphiboles.

Potential influence of the chemical composition of water on the stable oxygen isotope composition of continental ostracods

Many studies in continental areas have successfully used the oxygen isotope composition of fossil ostracod valves to reconstruct past hydrological conditions associated with large changes in climate. Yet, ostracods are known to crystallise their valves out of isotopic equilibrium for oxygen and they generally have higher 18O contents compared to inorganic calcite grown at equilibrium under the same condi- tions. A review of vital offsets determined for continental ostracods indicates that vital offsets might change from site to site, questioning a potential influence of environmental conditions on oxygen isotope fractionation in ostracods. Results from the literature suggest that pH has no influence on ostracod vital offset. A re-evaluation of results from Li and Liu (J Paleolimnol 43:111-120, 2010) suggests that salin- ity may influence oxygen isotope fractionation in ostracods, with lower vital offsets for higher salinities. Such a relationship was also observed for the vital offsets determined by Chivas et al. (The ostracoda- applications in quaternary research. American Geo- physical Union, Washington, DC, 2002). Yet, when results of all studies are compiled, the correlation between vital offsets and salinity is low while the correlation between vital offsets and host water Mg/Ca is higher, suggesting that ionic composition of water and/or relative abundance of major ions may also control oxygen isotope fractionation in ostracods. Lack of data on host water ionic composition for the different studies precludes more detailed examination at this stage. Further studies such as natural or laboratory cultures done under strictly controlled conditions are needed to better understand the potential influence of varying environmental condi- tions on oxygen isotope compositions of ostracod valves.

The oxygen concentrator : an appropriate technology for treating hypoxaemic children in developing countries

RÉSUMÉ L'Organisation Mondiale de la Santé (OMS) recommande d'administrer l'oxygène par concentrateurs dans les pays en voie de développement (PVD), les cylindres posant des problèmes logistiques et financiers trop importants. Cette technologie a été proposée aux enfants d'un hôpital sénégalais (Ndioum) qui présentaient les critères d'oxygénation de l'OMS. Les bénéfices cliniques et financiers ont été majeurs. En revanche, les connaissances des soignants sur les diverses techniques d'administration d'oxygène ainsi que les prestations du service de maintenance étaient insuffisantes. L'implantation de concentrateurs doit être encouragée dans les PVD, mais doit respecter une stratégie englobant enseignement, maintenance et suivi de l'opération. Diverses actions correctrices ont été entreprises à Ndioum où plusieurs concentrateurs fonctionnent désormais régulièrement. Summary: The World Health Organisation (WHO) recommends supplying oxygen in developing countries by concentra¬tors because cylinders pose considerable logistic and financial problems. This technology was employed to treat children in a hospital in Ndioum, Senegal, who met the WHO oxygenation criteria. There were clear clinical and financial benefits, but neither the nurses' knowledge of the various techniques of oxygen supply nor the maintenance service were satisfactory. The use of concentra¬tors should be encouraged in developing countries. A strategy including technical training, maintenance and monitoring should be adopted. Corrective actions were undertaken in Ndioum, and several concentrators are now being used on a regular basis.

Optimizing Cementious Content in Concrete Mixtures for Required Performance Final Report, January 2012

This research investigated the effects of changing the cementitious content required at a given water-to-cement ratio (w/c) on workability, strength, and durability of a concrete mixture. An experimental program was conducted in which 64 concrete mixtures with w/c ranging between 0.35 and 0.50, cementitious content ranging from 400 to 700 per cubic yard (pcy), and containing four different supplementary cementitious material (SCM) combinations were tested. The fine-aggregate to total-aggregate ratio was fixed at 0.42 and the void content of combined aggregates was held constant for all the mixtures. Fresh (i.e., slump, unit weight, air content, and setting time) and hardened properties (i.e., compressive strength, chloride penetrability, and air permeability) were determined. The hypothesis behind this study is that when other parameters are kept constant, concrete properties such as strength, chloride penetration, and air permeability will not be improved significantly by increasing the cement after a minimum cement content is used. The study found that about 1.5 times more paste is required than voids between the aggregates to obtain a minimum workability. Below this value, water-reducing admixtures are of no benefit. Increasing paste thereafter increased workability. In addition, for a given w/c, increasing cementitious content does not significantly improve compressive strength once the critical minimum has been provided. The critical value is about twice the voids content of the aggregate system. Finally, for a given w/c, increasing paste content increases chloride penetrability and air permeability.

Optimizing Cementitious Content in Concrete Mixtures for Required Performance Final Report, January 2012

This research investigated the effects of changing the cementitious content required at a given water-to-cement ratio (w/c) on workability, strength, and durability of a concrete mixture. An experimental program was conducted in which 64 concrete mixtures with w/c ranging between 0.35 and 0.50, cementitious content ranging from 400 to 700 per cubic yard (pcy), and containing four different supplementary cementitious material (SCM) combinations were tested. The fine-aggregate to total-aggregate ratio was fixed at 0.42 and the void content of combined aggregates was held constant for all the mixtures. Fresh (i.e., slump, unit weight, air content, and setting time) and hardened properties (i.e., compressive strength, chloride penetrability, and air permeability) were determined. The hypothesis behind this study is that when other parameters are kept constant, concrete properties such as strength, chloride penetration, and air permeability will not be improved significantly by increasing the cement after a minimum cement content is used. The study found that about 1.5 times more paste is required than voids between the aggregates to obtain a minimum workability. Below this value, water-reducing admixtures are of no benefit. Increasing paste thereafter increased workability. In addition, for a given w/c, increasing cementitious content does not significantly improve compressive strength once the critical minimum has been provided. The critical value is about twice the voids content of the aggregate system. Finally, for a given w/c, increasing paste content increases chloride penetrability and air permeability.

Skeletal muscle mitochondrial and lipid droplet content assessed with standardized grid sizes for stereology.

Skeletal muscle mitochondrial (Mito) and lipid droplet (Lipid) content are often measured in human translational studies. Stereological point counting allows computing Mito and Lipid volume density (Vd) from micrographs taken with transmission electron microscopes. Former studies are not specific as to the size of individual squares that make up the grids, making reproducibility difficult, particularly when different magnifications are used. Our objective was to determine which size grid would be best at predicting fractional volume efficiently without sacrificing reliability and to test a novel method to reduce sampling bias. Methods: ten subjects underwent vastus lateralis biopsies. Samples were fixed, embedded, and cut longitudinally in ultrathin sections of 60 nm. Twenty micrographs from the intramyofibrillar region were taken per subject at Ã-33,000 magnification. Different grid sizes were superimposed on each micrograph: 1,000 Ã- 1,000 nm, 500 Ã- 500 nm, and 250 Ã- 250 nm. Results: mean Mito and Lipid Vd were not statistically different across grids. Variability was greater when going from 1,000 Ã- 1,000 to 500 Ã- 500 nm grid than from 500 Ã- 500 to 250 Ã- 250 nm grid. Discussion: this study is the first to attempt to standardize grid size while keeping with the conventional stereology principles. This is all in hopes of producing replicable assessments that can be obtained universally across different studies looking at human skeletal muscle mitochondrial and lipid droplet content.

Whole-rat protein content estimation: applicability of the Nx6.25 factor

The amino acid composition of the protein from three strains of rat (Wistar, Zucker lean and Zucker obese), subjected to reference and high-fat diets has been used to determine the mean empirical formula, molecular weight and N content of whole-rat protein. The combined whole protein of the rat was uniform for the six experimental groups, containing an estimate of 17.3% N and a mean aminoacyl residue molecular weight of 103.7. This suggests that the appropriate protein factor for the calculation of rat protein from its N content should be 5.77 instead of the classical 6.25. In addition, an estimate of the size of the non-protein N mass in the whole rat gave a figure in the range of 5.5 % of all N. The combination of the two calculations gives a protein factor of 5.5 for the conversion of total N into rat protein.

Measurement of total estrone content in foods. Application to dairy products.

Estrone is a powerful growth-inducing hormone that is present in milk, mainly in the form of fatty acid esters, at concentrations that promote growth in experimental animals. We present here a method useful for the measurement of this natural hormone in foods and applied it to several common dairy products. Samples were frozen, finely powdered, and lyophilized then extracted with trichloromethane/methanol; the dry extract was saponified with potassium hydroxide. The free estrone evolved was extracted with ethyl acetate and was used for the estimation of total estrone content through radioimmunoassay. Application of the method to dairy products showed high relative levels of total estrone (essentially acyl-estrone) in milk, in the range of 1 ¿M, which were halved in skimmed milk. Free estrone levels were much lower, in the nanomolar range. A large proportion of estrone esters was present in all other dairy products, fairly correlated with their fat content. The amount of estrone carried by milk is well within the range, where its intake may exert a physiological response in the sucklings for which it is provided. These growth-inducing and energy expenditure-lowering effects may affect humans ingesting significant amounts of dairy products.

Rat splanchnic net oxygen consumption. Energetic implications

1. The blood flow, PO2, pH and PCO2 have been estimated in portal and suprahepatic veins as well as in hepatic artery of fed and overnight starved rats given an oral glucose load. From these data the net intestinal, hepatic and splanchnic balances for oxygen and bicarbonate were calculated. The oxygen consumption of the intact animal has also been measured under comparable conditions. 2. The direct utilization of oxygen balances as energy equivalents when establishing the contribution of energy metabolism of liver and intestine to the overall energy expenses of the rat, has been found to be incorrect, since it incorporates the intrinsic error of interorgan proton transfer through bicarbonate. Liver and intestine produced high net bicarbonate balances in all situations tested, implying the elimination (by means of oxidative pathways, i.e. consuming additional oxygen) of high amounts of H+ generated with bicarbonate. The equivalence in energy output of the oxygen balances was then corrected for bicarbonate production to 11-54% lower values. 3. Intestine and liver consume a high proportion of available oxygen, about one-half in basal (fed or starved) conditions and about one-third after gavage, the intestine consumption being about 15% in all situations tested and the liver decreasing its oxygen consumption with gavage.

X-ray photoelectron spectroscopy of oxygen adsorbates on Al(111): Theory experiment

We present the result of polar angle resolved x¿ray photoemission spectroscopy on Al(111)/O and cluster calculations of the O(1s) binding energy (BE) for various model situations. In the experimental data two O(1s) peaks are observed, separated by 1.3 eV. The angular behavior (depth¿resolution) could indicate that the lower BE peak is associated with an O atom under the surface, and the higher BE peak with an O atom above the surface. Equally, it could indicate oxygen islands on the surface where the perimeter atoms have a higher O(1s) BE than the interior atoms. The cluster calculations show that the former interpretation cannot be correct, since an O ads below the surface has a higher calculated O(1s) BE than one above. Cluster calculations simulating oxygen islands are, however, consistent with the experimental data.

FY12 Recycled Content Plastic Bag and Soy Inks report

This report summarizes the purchasing activity for soy based inks and recycled content trash bags for the Iowa DOT.

Evidence for oxygen-island formation on Al(111): Cluster-model theory and x-ray photoelectron spectroscopy

The O 1s x-ray photoelectron spectroscopy spectrum for Al(111)/O at 300 K shows two components whose behavior as a function of time and variation of detection angle are consistent with either (a) a surface species represented by the higher binding-energy (BE) component and a subsurface species represented by the lower BE component, or (b) small close-packed oxygen islands with the interior atoms represented by the lower BE component and the perimeter atoms by the higher BE component. We have modeled both situations using ab initio Hartree-Fock wave functions for clusters of Al and O atoms. For an O atom in a threefold site, it was found that a below-surface position gave a higher O 1s BE than an above-surface position, incompatible with interpretation (a). This change in the O 1s BE could arise because the bond for O to Al may have a more covalent character when the O is below the surface than when it is above the surface. We present evidence consistent with this view. An O adatom island with all the O atoms in threefold sites gives calculated O 1s BE's which are significantly higher for the perimeter O atoms. Further, the results for an isolated O island without the Al substrate present also give higher BE¿s for the perimeter atoms. Both these results are consistent with interpretation (b). Published scanning-tunneling-microscopy data supports the suggestion that the chemisorbed state consists of small, close-packed islands, whereas the presence of two vibrational modes in high-resolution electron-energy-loss spectroscopy data has been interpreted as representing surface and subsurface oxygen atoms. In light of the present results, we suggest that a vibrational interpretation in terms of interior and perimeter adatoms should be considered.