Evolution of the DRD2 gene haplotype and its association with alcoholism in Mexican Americans

The human D2 dopamine receptor gene (DRD2) plays a central role in the neuromodulation of appetitive behaviors and is implicated in having a possible role in susceptibility to alcoholism. We genotyped an SNP in DRD2 Exon 8 in 251 nonalcoholic, unrelated, healthy controls and 200 alcoholic Mexican Americans. The DRD2 haplotypes were analyzed using the Exon 8 genotype in combination with five other SNP genotypes, which were obtained from our previous study. The ancestral origins of the DRD2 polymorphisms have been determined by sequencing the homologous region in other higher primates. Twenty DRD2 haplotypes, defined as H1 to H20 based on their frequency from high to low, were obtained in this major minority population. The ancestral haplotype "I-132-G-C-G-A1" and two one-step mutation haplotypes were absent in our study population. The haplotype H1, "I-B1-T-C-A-A1", with the highest frequency in the population, is a three-step mutation from the ancestral form. The first five or eight major haplotypes make up 87% or 95% of the entire population, respectively. The prevalence of the haplotype H1+ (H1/H1 and H1/Hn genotypes) is significantly higher in alcoholics and alcoholic subgroups, including early onset drinkers and benders, than in their respective control groups. The Promoter -141C allele is in linkage disequilibrium (LD) with five other loci in the nonalcoholic group, but not in the alcoholic group. All of the other five loci are in LD in both the alcoholic and control groups. The DRD2 TaqI B allele is in complete LD with the allele located in intron 6. Five SNPs, Promoter -141C, TaqI B (or Intron 6), Exon 7, Exon 8, and TaqI A, are sufficient to define the DRD2 haplotypes in Mexican Americans. Our data indicate that the DRD2 haplotypes are associated with alcoholism in Mexican Americans. (c) 2005 Elsevier Inc. All rights reserved.

Genome 10K: A Proposal to Obtain Whole-Genome Sequence for 10 000 Vertebrate Species

The human genome project has been recently complemented by whole-genome assessment sequence of 32 mammals and 24 nonmammalian vertebrate species suitable for comparative genomic analyses. Here we anticipate a precipitous drop in costs and increase in sequ

Tin coating requirements in fish cans

Prawn, crab and clam meat were processed in experimental ca s having reduced internal tin coating of 5.6 GSM. Conventional cans having 11.2 GSM tin coating were used as control. Results showed that experimental cans behaved normally when used for canning prawns, provided the lacquer film was perfect with no exposure of metal. When there was a discontinuity in lacquer film exposing the metal blackening took place in such areas. Areas subjected to severe strains like the lock seam side and expansion rings on can ends were found to be more prone to blackening. Experimental cans were found unsuitable for canning crab meat or clam meat because in both cases the can wall as well as the contents underwent discoloration, in all cases.

Molecular identification of symbiotic dinoflagellates (Zooxanthellae) of dominant reef-building corals off Kish Island

Scleractinian coral species harbour communities of photosynthetic taxa of the genus Symbiodinium. As many as eight genetic clades (A, B, C, D, E, F, G and H) of Symbiodinium have been discovered using molecular biology. These clades may differ from each other in their physiology, and thus influence the ecological distribution and resilience of their host corals to environmental stresses. Corals of the Persian Gulf are normally subject to extreme environmental conditions including high salinity and seasonal variation in temperature. This study is the first to use molecular techniques to identify the Symbiodinium of the Iranian coral reefs to the level of phylogenetic clades. Samples of eight coral species were collected at two different depths from the eastern part of Kish Island in the northern Persian Gulf. Partial 28S nuclear ribosomal (nr) DNA of Symbiodinium (D1/D2 domains) were amplified by Polymerase Chain Reaction (PCR). PCR products were analyzed using Single Stranded Conformational Polymorphism (SSCP) and phylogenetic analyses of the LSU DNA sequences from a subset of the samples. The results showed that Symbiodinium populations were generally uniform among and within the populations of 8 coral species studied, and there are at least two clades of Symbiodinium from Kish Island. Clade D was detected from 8 of the coral species while clade C90 was found in 2 of species only (one species hosted two clades simultaneously). The dominance of clade D might be explained by high temperatures or the extreme temperature variation, typical of the Persian Gulf.

Molecular phylogeny and taxonomy of wood mice (genus Apodemus Kaup, 1829) based on complete mtDNA cytochrome b sequences, with emphasis on Chinese species

Phylogenetic relationships among 15 species of wood mice (genus Apodemus) were reconstructed to explore some long-standing taxonomic problems. The results provided support for the monophyly of the genus Apodemus, but could not reject the hypothesis of paraphyly for this genus. Our data divided the 15 species into four major groups: (1) the Sylvaemus group (A. sylvaticus, A. flavicollis, A. alpicola, and A. uralensis), (2) the Apodemus group (A. peninsulae, A. chevreri, A. agrarius, A. speciosus, A. draco, A. ilex, A. semotus, A. latronum, and A. mystacinus), (3) A. argenteus, and (4) A. gurkha. Our results also suggested that orestes should be a valid subspecies of A. draco rather than an independent species; in contrast, A. ilex from Yunnan may be regarded as a separate species rather than a synonym of orestes or draco. The species level status of A. latronum, tscherga as synonyms of A. uralensis, and A. chevrieri as a valid species and the closest sibling species of A. agrarius were further corroborated by our data. Applying a molecular clock with the divergences of Mus and Rattus set at 12 million years ago (Mya) as a calibration point, it was estimated that five old lineages (A. mystacinus and four major groups above) diverged in the late Miocene (7.82-12.74 Mya). Then the Apodemus group (excluding A. mystacinus) split into two subgroups: agrarius and draco, at about 7.17-9.95 Mya. Four species of the Sylvaemus group were estimated to diverge at about 2.92-5.21 Mya. The Hengduan Mountains Region was hypothesized to have played important roles in Apodemus evolutionary histories since the Pleistocene. (C) 2004 Elsevier Inc. All rights reserved.

Characterization of genetic biodiversity of Nile perch, Lates niloticus, Tilapiines, Haplochromine flock and Ningu (Labeo victorianus) in the Victoria Lake Basin: an overview

Genetic biodiversity is the vaflatlOn among individuals within and between units of interbreeding individuals (populations) of a species. It includes inheritable and transmittable differences that occur between individuals andlor popuhitions of a given species through reproductive interaction. There exists enormous variability among individuals andlor populations of a species for most living organisms, and most of this variation is inheritable. differences among individuals arise through mutation and via recombination of genes during meiosis. These ifferences are then transmitted to successive generations through sexual reproduction and maintained in the populations through processes such as natural selection and genetic drift. Unfortunately much of this variation is normally threatened and often in danger of extinction because most focus in conservation of natural resources is put at saving species or habitats than varieties or strains of a species

Trolling for Nile perch (Lates niloticus) in Lake Kyoga

Nile perch were introduced into Lake Kyoga in the mid·1950s from Lake Albert. Murchison Falls on the River Nile, between the two lakes, prevented Nile Perch and other elements of the typical nilotic fish population from naturally reaching Lake Kyoga. The introduction has been successful and considerable stocks of Nile Perch now exist in Lake Kyoga. In 1967, 13,000 tons of Nile Perch were estimated to have been landed by the commercial fishermen, fish of 200 lb. being now caught and specimens of 100 lb. being fairly common. Large Nile perch are caught commercially on long lines baited with live Protopterus' spp. or Clarias spp. Large mesh gillnets uccasionally take Nile Perch of up to 30 lb., but the high cost of the nets does not, at the moment, appear to justify this method of fishing; a 10 in. net, stretched 100 yards long (unmounted). 15 meshes deep and 60-ply nylon. costs approximately U. Shs. 300. The long·lines used are extremely simple and cheap to make, but considerable labour is needed to catch bait. Small Protopterus are normally caught by turning over floating rafts of grasses and papyrus, and extracting the fish from the root mass; this is hard and dirty work. Other small fish, more readily available, do not, according to fishermen, work as well, possibly because they are not as durable as the Protopterus or Clarias. Dead bait is never used.

AlN-based BAW resonators with CNT electrodes for gravimetric biosensing

Solidly mounted resonators (SMRs) with a top carbon nanotubes (CNTs) surface coating that doubles as an electrode and as a sensing layer have been fabricated. The influence of the CNTs on the frequency response of the resonators was studied by direct comparison to identical devices with a top metallic electrode. It was found that the CNTs introduced significantly less mass load on the resonators and these devices exhibited a greater quality factor, Q (>2000, compared to ∼1000 for devices with metal electrodes), which increases the gravimetric sensitivity of the devices by allowing the tracking of smaller frequency shifts. Protein solutions with different concentrations were loaded on the top of the resonators and their responses to mass-load from physically adsorbed coatings were investigated. Results show that resonators using CNTs as the top electrode exhibited a higher frequency change for a given load (∼0.25 MHz cm2 ng-1) compared to that of a metal thin film electrode (∼0.14 MHz cm2 ng-1), due to the lower mass of the CNT electrodes and their higher active surface area compared to that of a thin film metal electrode. It is therefore concluded that the use of CNT electrodes on resonators for their use as gravimetric biosensors is a significant improvement over metallic electrodes that are normally employed. © 2011 Elsevier B.V. All rights reserved.

THE PHYLOGENETIC-RELATIONSHIPS AND CLASSIFICATION OF THE DOUCS AND SNUB-NOSED LANGURS OF CHINA AND VIETNAM

The taxonomy of the douc and snub-nosed langurs has changed several times during the 20th century. The controversy over the systematic position of these animals has been due in part to difficulties in studying them: both the doucs and the snub-nosed langurs are rare in the wild and are generally poorly represented in institutional collections. This review is based on a detailed examination of relatively large numbers of specimens of most of the species of langurs concerned. An attempt was made to draw upon as many types of information as were available in order to make an assessment of the phyletic relationships between the langur species under discussion. Toward this end, quantitative and qualitative features of the skeleton, specific features of visceral anatomy and characteristics of the pelage were utilized. The final data matrix comprised 178 characters. The matrix was analyzed using the program Hennig86. The results of the analysis support the following conclusions: (1) that the douc and snub-nosed langurs are generically distinct and should be referred to as species of Pygathrix and Rhinopithecus, respectively; (2) that the Tonkin snub-nosed langur be placed in its own subgenus as Rhinopithecus (Presbytiscus) avunculus and that the Chinese snub-nosed langur thus be placed in the subgenus Rhinopithecus (Rhinopithecus); (3) that four extant species of Rhinopithecus be recognized: R. (Rhinopithecus) roxellana Milne Edwards, 1870; R. (Rhinopithecus) bieti Milne Edwards, 1897; R. (Rhinopithecus) brelichi Thomas, 1903, and R. (Presbytiscus) avunculus Dollman, 1912; (4) that the Chinese snub-nosed langurs fall into northern and southern subgroups divided by the Yangtze river; (5) that R. lantianensis Hu and Qi, 1978, is a valid fossil species, and (6) the precise affinities and taxonomic status of the fossil species R. tingianus Matthew and Granger, 1923, are unclear because the type specimen is a subadult.

Intergroup interactions in Tibetan macaques at Mt. Emei, China

Data on intergroup-interactions (I-I) were collected in 5 seasonally provisioned groups (A, B, D, D-1, and E) of Tibetan macaques (Macaca Thibetana) at Mt. Emei in three 70-day periods between 1991 April-June (P1), September-November (P2), December-1992 February (P3). The I-I were categorized as forewarning made by high-ranking males (including Branch Shaking and/or Loud Calls), long-distance interactions in space (specified by changes in their foraging movements), and close encounters (with Affinitive Behavior, Male's Herding Female, Sexual Interaction, Severe Conflict, Adult Male-male Conflict, Opportunistic Advance and Retreat, etc. performed by different age-sex classes). From periods Fl to P3, the I-I rate decreased with reduction in population density as a positive correlate of food clumpedness or the number of potential feeders along a pedestrian trail. On the other hand, from the birth season (BS, represented by P1 and P3) to the mating season (MS, represented by P2) the dominance relation between groups, which produced a winner and a loser in the encounters, became obscure; the proportion of close encounters in the I-I increased; the asymmetry (local groups over intruders) of forewarning signals disappeared; the rate of branch shaking decreased; and sometimes intergroup cohesion appeared. Considering that sexual interactions also occurred between the encountering groups, above changes in intergroup behaviors may be explained with a model of the way in which the competition for food (exclusion) and the sexual attractiveness between opposite sexes were in a dynamic equilibrium among the groups, with the former outweighing the latter in the BS, and conversely in the MS. Females made 93% of severe conflicts, which occurred in 18% of close encounters. Groups fissioned in the recent past shared the same home range, and showed the highest hostility to each other by females. In conspicuous contrast with females' great interest in intergroup food/range competition, adult male-male conflicts that were normally without body contact occurred in 66% bf close encounters; high-ranking male herding of females, which is typical in baboons, appeared in 83% of close encounters, and showed no changes with season and sexual weight-dimorphism; peripheral juvenile and subadult males were the main performers of the affinitive behaviors, opportunistic advance and retreat, and guarding at the border. In brief, all males appeared to "sit on the fence" at the border, likely holding out hope of gaining the favor of females both within and outside the group. Thus, females and males attempted to maximize reproductive values in different ways, just as expected by Darwin-Trivers' theory of sexual selection. In addition, group fission was observed in the largest and highest-ranking group for two times (both in the MS) when its size increased to a certain level, and the mother group kept their dominant position in size and rank among the groups that might encounter, suggesting that fission takes a way of discarding the "superfluous part" in order to balance the cost of competition for food and mates within a group, and the benefit of cooperation to access the resources for animals in the mother group. (C) 1997 Wiley-Liss, Inc.

New evidence for the origin and behaviour of deep ocean 'crusts'

In situ tests in deep waterWest African clays show crust-like shear strengths within the top few metres of sediment. Typical strength profiles show su rising from mud-line to 10 kPa to 15 kPa before dropping back to normally consolidated strengths of 3 kPa to 4 kPa by 1.5m to 2m depth. A Cam-shear device is used to better understand the mechanical behaviour of undisturbed crust samples under pipelines. Extremely variable peak and residual shear strengths are observed for a range of pipeline consolidation stresses and test shear rates, with residual strengths approximating zero. ESEM of undisturbed samples and wet-sieved samples from various core depths show the presence of numerous randomly-located groups of invertebrate faecal pellets. It is therefore proposed that the cause of strength variability during shear testing and, indeed, of the crust's origin, is the presence of random groups of faecal pellets within the sediment. © 2011 Taylor & Francis Group, London.

Seismically-induced displacements of a suction caisson in soft clay

The seismic design for offshore foundations is based predominantly on experience onshore. This paper describes the results of dynamic centrifuge tests performed to validate the performance of a suction caisson installed in normally consolidated clay. The main objective is to evaluate the likely plastic displacement under different shaking levels. Permanent displacement results indicate that the displacements experienced are well within the allowable movement for the foundation considered, even though a strength based design approach would consider this to be a failure. Larger earthquakes are seen to produce comparatively smaller displacements. It is concluded that the when designing for seismic loading, if some displacement is permissible then a performance-based approach allowing some displacement proves significantly less conservative than a purely strength-based design. It is also concluded that dynamic response analyses should consider the strength of soil, as this can act as a fuse against large amplitude shear waves. © 2011 Taylor & Francis Group, London.

Buyer-supplier relationships in a servitized environment: An examination with Cannon and Perreault's framework

Purpose: The purpose of this study is to examine a buyer's adoption of servitization and the associated implications for the relationships with its suppliers. Design/methodology/approach: The authors use the case study approach to examine the tripartite relationship between a manufacturing company and two of its two suppliers. The paper explores the perspectives of employees on multiple organisational levels, and collects evidence on both sides of a relationship. The authors use template analysis utilising Cannon and Perreault's relationship connectors framework to analyse the data. Findings: There are overarching implications of servitization adoption for buyer-supplier relationships. The implications are notable in all five relationship connectors. Parties expected more open exchange of information, operational linkages were strengthened and changes in the structural arrangements of relationships were witnessed. Legal contracts are complemented by relational norms. The authors also observed a departure away from a win-lose mentality and increased levels of supplier adaptation to support the buyer's provision of integrated solutions. Research limitations/implications: The findings are confined to this tripartite relationship and to an extent are context specific. Practical implications: The study unveils buyer-supplier relationships in a servitized context and provides managers with a better understanding of some of the potential implications that the adoption of a servitization strategy may have for managing buyer-supplier relationships. Originality/value: This is the first empirical study that explores the implications of servitization on buyer-supplier relationships. It advances the understanding of the implications that the adoption of servitization has on the manner in which two parties interrelate and conduct commercial exchange. © Emerald Group Publishing Limited.

Effects of preferential transport in turbulent bluff-body-stabilized lean premixed CH 4/air flames

Preferential species diffusion is known to have important effects on local flame structure in turbulent premixed flames, and differential diffusion of heat and mass can have significant effects on both local flame structure and global flame parameters, such as turbulent flame speed. However, models for turbulent premixed combustion normally assume that atomic mass fractions are conserved from reactants to fully burnt products. Experiments reported here indicate that this basic assumption may be incorrect for an important class of turbulent flames. Measurements of major species and temperature in the near field of turbulent, bluff-body stabilized, lean premixed methane-air flames (Le=0.98) reveal significant departures from expected conditional mean compositional structure in the combustion products as well as within the flame. Net increases exceeding 10% in the equivalence ratio and the carbon-to-hydrogen atom ratio are observed across the turbulent flame brush. Corresponding measurements across an unstrained laminar flame at similar equivalence ratio are in close agreement with calculations performed using Chemkin with the GRI 3.0 mechanism and multi-component transport, confirming accuracy of experimental techniques. Results suggest that the large effects observed in the turbulent bluff-body burner are cause by preferential transport of H 2 and H 2O through the preheat zone ahead of CO 2 and CO, followed by convective transport downstream and away from the local flame brush. This preferential transport effect increases with increasing velocity of reactants past the bluff body and is apparently amplified by the presence of a strong recirculation zone where excess CO 2 is accumulated. © 2011 The Combustion Institute.

Technology confidence in early stage development of medical devices

Innovation is a critical factor in ensuring commercial success within the area of medical technology. Biotechnology and Healthcare developments require huge financial and resource investment, in-depth research and clinical trials. Consequently, these developments involve a complex multidisciplinary structure, which is inherently full of risks and uncertainty. In this context, early technology assessment and 'proof of concept' is often sporadic and unstructured. Existing methodologies for managing the feasibility stage of medical device development are predominantly suited to the later phases of development and favour detail in optimisation, validation and regulatory approval. During these early phases, feasibility studies are normally conducted to establish whether technology is potentially viable. However, it is not clear how this technology viability is currently measured. This paper aims to redress this gap through the development of a technology confidence scale, as appropriate explicitly to the feasibility phase of medical device design. These guidelines were developed from analysis of three recent innovation studies within the medical device industry.