970 resultados para N-cam Glycoforms
Resumo:
OBJECTIVES: Over the past few years, a considerable increase in complementary and alternative medicine (CAM) has been observed, particularly in primary care. In contrast little is known about the supply of CAM in Swiss hospitals. This study aims at the investigation of amount and structure of CAM activities of Swiss hospitals. MATERIALS AND METHODS: We designed a cross-sectional survey using a 2-step, questionnaire- based approach acquiring overview information form hospital managers in a first questionnaire leading to detailed information on CAM usage at medical department level (head of department). This second questionnaire provides data of physician-based and non-physician-based CAM supply. RESULTS: The size of hospitals was significantly associated with the provision of CAM. 33% of the hospital managers indicated 1 or more medical doctor (MD) using CAM in their hospital compared to 37% of confirmation on department level (Kappa value 0.5). Mostly different CAM methods were applied. Acupuncture was used most frequently. However only 13 hospitals (11%) occupied more than 3 CAM MDs and only 5 hospitals had more than 2 full-time equivalents for MDs. Furthermore, 74.7% of these personnel resources were dedicated for outpatient care. In terms of CAM methods anthroposophic medicine accounted for more than half of the total personnel costs. On the other hand usage of non-physician based CAM accounted for 41% according to hospital managers compared to 64% of CAM usage according to medical departments (Kappa values 0.31). Reflexology of the foot was used most frequently. CONCLUSION: Total supply of CAM in Swiss hospitals is low and concentrates on few hospitals. Acupuncture is the widest spread discipline but anthroposophic medicine spends the most resources. The study shows that a high patient demand for CAM faces low supply in hospitals.
Resumo:
BACKGROUND: The study is part of a nationwide evaluation of complementary and alternative medicine (CAM) in primary care in Switzerland. The goal was to evaluate the extent and structure of basic health insurance expenditures for complementary and alternative medicine in Swiss primary care. METHODS: The study was designed as a cross-sectional evaluation of Swiss primary care providers and included 262 certified CAM physicians, 151 noncertified CAM physicians and 172 conventional physicians. The study was based on data from a mailed questionnaire and on reimbursement information obtained from health insurers. It was therefore purely observational, without interference into diagnostic and therapeutic procedures applied or prescribed by physicians. Main outcome measures included average reimbursed costs per patient, structured into consultation- and medication-related costs, and referred costs. RESULTS: Total average reimbursed cost per patient did not differ between CAM physicians and conventional practitioners, but considerable differences were observed in cost structure. The proportions of reimbursed costs for consultation time were 56% for certified CAM, 41% for noncertified CAM physicians and 40% for conventional physicians; medication costs--including expenditures for prescriptions and directly dispensed drugs--respectively accounted for 35%, 18%, and 51% of costs. CONCLUSION: The results indicate no significant difference for overall treatment cost per patient between CAM and COM primary care in Switzerland. However, CAM physicians treat lower numbers of patients and a more cost-favourable patient population than conventional physicians. Differences in cost structure reflect more patient-centred and individualized treatment modalities of CAM physicians.
Resumo:
BACKGROUND: Complementary and alternative medicine (CAM) and most of all anthroposophic medicine (AM) are important features of cancer treatment in Switzerland. While the number of epidemiological investigations into the use of such therapies is increasing, there is a distinct lack of reports regarding the combination of conventional and CAM methods. PATIENTS AND METHODS: 144 in-patients with advanced epithelial cancers were enrolled in a prospective quality-of-life (QoL) study at the Lukas Klinik (LK), Arlesheim, Switzerland. Tumor-related treatment was assessed 4 months prior to admission, during hospitalization and 4 months after baseline. OBJECTIVE: We aimed at giving a detailed account of conventional, AM and CAM treatment patterns in palliative care, before, during and after hospitalization, with emphasis on compliance with AM after discharge. RESULTS: Certain conventional treatments featured less during hospitalization than before but were resumed after discharge (chemotherapy, radiotherapy, sleeping pills, psychoactive drugs). Hormone therapy, corticosteroids, analgesics WHO III and antidepressants remained constant. AM treatment consisted of Iscador? (mistletoe), other plant- or mineral-derived medication, baths, massage, eurythmy, art therapy, counseling and lactovegetarian diet. Compliance after discharge was highest with Iscador (90%) and lowest with art therapy (14%). Many patients remained in the care of AM physicians. Other CAM and psychological methods were initially used by 39.9% of patients. After 4 months, the use had decreased with few exceptions. CONCLUSION: During holistic palliative treatment in an anthroposophic hospital, certain conventional treatments featured less whereas others remained constant. After discharge, chemotherapy returned to previous levels, AM compliance remained high, the use of other CAM therapies low.
Resumo:
Objective: The aim of this literature review, performed within the framework of the Swiss governmental Program of Evaluation of Complementary Medicine (PEK), was to investigate costs of complementary and alternative medicine (CAM). Materials and Methods: A systematic literature search was conducted in 11 electronic databases. All retrieved titles and reference lists were also hand-searched. Results: 38 publications were found: 23 on CAM of various definitions (medical and non-medical practitioners, over-the-counter products), 13 on homeopathy, 2 on phytotherapy. Studies investigated different kinds of costs (direct or indirect) and used different methods (prospective or retrospective questionnaires, data analyses, cost-effectiveness models). Most studies report 'out of pocket' costs, because CAM is usually not covered by health insurance. Costs per CAM-treatment / patient / month were AUD 7-66, CAD 250 and GBP 13.62 +/- 1.61. Costs per treatment were EUR 205 (range: 15-1,278), USD 414 +/- 269 and USD 1,127. In two analyses phytotherapy proved to be cost-effective. One study revealed a reduction of 1.5 days of absenteeism from work in the CAM group compared to conventionally treated patients. Another study, performed by a health insurance company reported a slight increase in direct costs for CAM. Costs for CAM covered by insurance companies amounted to approximately 0.2-0.5% of the total healthcare budget (Switzerland, 2003). Publications had several limitations, e.g. efficacy of therapies was rarely reported. As compared to conventional patients, CAM patients tend to cause lower costs. Conclusion: Results suggest lower costs for CAM than for conventional patients, but the limited methodological quality lowers the significance of the available data. Further well-designed studies and models are required.
Resumo:
Within the framework of the Swiss governmental Program of Evaluation of Complementary Medicine (PEK) we assessed the prevalence, use, perceived effectiveness and appreciation of complementary medicine (CAM) in Switzerland, according to published surveys. Materials and Methods: Search was performed through electronic databases, by hand-searching and by contacting experts at universities, hospitals, health insurances, patient organizations and pharmaceutical companies. Results: Surveys were carried out among the general population (40%), physicians (20%), hospitalized patients (30%) and obstetric institutions (5%). The number of publications increased strongly between 1981 and 2004. The mean +/- SD prevalence (use) of CAM is 49 +/- 22% and varies depending on the survey's topic and the population group interviewed. The acceptance, appreciation or demand for CAM among individuals specifically interviewed on CAM is 91 +/- 6%. When asked about favored general improvements in healthcare, 6.5% of the individuals spontaneously mentioned CAM. CAM therapies are considered to be effective by the majority of CAM users and by about 40% of cancer patients using CAM. Approximately 50% of the population stated a preference for hospitals that also provide CAM. 85% of the population wishes the costs for CAM to be covered by the basic health insurance. Conclusion: Approximately half of the Swiss population has used CAM. CAM treatment is considered to be effective by the majority of CAM users. About 50% of the population would prefer hospitals that also provide CAM therapies and the majority of the population wishes the cost for CAM therapies to be covered by basic health insurance.
Resumo:
Early radiographic detection of femoroacetabular impingement might prevent initiation and progression of osteoarthritis. The structural abnormality in femoral-induced femoroacetabular impingement (cam type) is frequently asphericity at the anterosuperior head/neck contour. To determine which of six radiographic projections (anteroposterior, Dunn, Dunn/45 degrees flexion, cross-table/15 degrees internal rotation, cross-table/neutral rotation, and cross-table/15 degrees external rotation) best identifies femoral head/neck asphericity, we studied 21 desiccated femurs; 11 with an aspherical femoral head/neck contour and 10 with a spherical femoral head/neck contour. To radiographically quantify femoral head asphericity, we measured the angle where the femoral head/neck leaves sphericity (angle alpha). The aspherical femoral head/neck contours had a greater maximum angle alpha (70 degrees ) compared with the spherical head/neck contours (50 degrees ). The angle alpha varied depending on the radiographic projection: it was greatest in the Dunn view with 45 degrees hip flexion (71 degrees +/- 10 degrees ) and least in the cross-table view in 15 degrees external rotation (51 degrees +/- 7 degrees ). Diagnosis of a pathologic femoral head/neck contour depends on the radiologic projection. The Dunn view in 45 degrees or 90 degrees flexion or a cross-table projection in internal rotation best show femoral head/neck asphericity, whereas anteroposterior or externally rotated cross-table views are likely to miss asphericity. Level of Evidence: Prognostic study, level II-1 (retrospective study).
Resumo:
Femoroacetabular impingement (FAI) is frequent; the estimated prevalence ranges between 10 and 15%. Our 10-years experience strongly suggests that FAI leads to osteoarthritis. Isolated acetabular or femoral abnormalities are rare, even though in women acetabular and in men femoral abnormalities predominate. Normal radiographs do not exclude the presence of FAI. Symptoms are related to the degree of deformity and occur earlier in the presence of activities requiring high levels of motion. The majority of patients with FAI are under the age of 40 years.In contrast to impingement in total hip replacement, the natural hip is under much higher constraint, not allowing to escape from impingement-induced shear forces by subluxation or complete dislocation. FAI-induced shear forces due to an aspherical femoral head/neck (cam type) are therefore high, causing outside-in damage with cleavage lesions of the acetabular cartilage by forced flexion and internal rotation. The cartilage of the femoral head remains initially intact, which cannot be explained by the classic concept of osteoarthritis. After the femoral head has migrated into the acetabular cartilage defect, vertical forces contribute to the further course of osteoarthritis. Tears between the labrum and cartilage, as seen by MRI, are not avulsions of the labrum from the cartilage but rather outside-in avulsions of the cartilage from the labrum. In acetabular overcoverage (pincer type) the labrum is the first structure to fail and acetabular cartilage damage develops thereafter.The treatment of FAI in patients under the age of 40 years is aimed at joint preservation. The clinical result is worse in the presence of significant cartilage damage. Therefore, early appreciation of FAI and timely therapeutic intervention as well as professional and athletic adjustment are important if osteoarthritis is to be prevented.
Resumo:
OBJECTIVE: The purpose of this article is to show the important radiographic criteria that indicate the two types of femoroacetabular impingement: pincer and cam impingement. In addition, potential pitfalls in pelvic imaging concerning femoroacetabular impingement are shown. CONCLUSION: Femoroacetabular impingement is a major cause for early "primary" osteoarthritis of the hip. It can easily be recognized on conventional radiographs of the pelvis and the proximal femur.
Resumo:
Transendothelial migration is a crucial step in the complex process of lymphocyte extravasation during lymphocyte homing, immunosurveillance and inflammation. However, little is known about the precise role of cell adhesion molecules (CAM) involved in this particular event. To define the CAM involved in T cell adhesion versus transendothelial migration, we have previously established an in vitro transendothelial migration system using mouse T cells and mouse endothelioma cells. We demonstrate here that, using ICAM-1-deficient endothelioma cells derived from ICAM-1 mutant mice, transendothelial migration of T cells was inhibited to a much greater extent when compared to migration across wild-type cells treated with a blocking anti-ICAM-1 monoclonal antibody. This unexpected result was confirmed by a rescue experiment using retroviral transfer of wild-type ICAM-1 into ICAM-1-deficient endothelial cells. Additional experiments showed that, in the absence of functional ICAM-1, only ICAM-2 was involved in transendothelial migration, but not PECAM-1, VCAM-1, or E-selectin. Taking this novel approach, we show that ICAM-1 and ICAM-2 are essential for transendothelial migration of T cells.
Resumo:
OBJECTIVE: To investigate the effects of tyrosine-kinase inhibitors of vascular endothelial growth factor (VECF) and platelet-derived growth factor (PDCF)-receptors on non-malignant tissue and whether they depend upon the stage of vascular maturation. MATERIALS AND METHODS: PTK787/ZK222584 and CGP53716 (VEGF- and PDGF-receptor inhibitor respectively), both alone and combined, were applied on chicken chorioallantoic membrane (CAM). RESULTS: On embryonic day of CAM development (E)8, only immature microvessels, which lack coverage of pericytes, are present: whereas the microvessels on E12 have pericytic coverage. This development was reflected in the expression levels of pericytic markers (alpha-smooth muscle actin, PDGF-receptor beta and desmin), which were found by immunoblotting to progressively increase between E8 and E12. Monotherapy with 2 microg of PTK787/ZK222584 induced significant vasodegeneration on E8, but not on E12. Monotherapy with CGP53716 affected only pericytes. When CGP53716 was applied prior to treatment with 2 microg of PTK787/ZK222584, vasodegeneration occurred also on E12. The combined treatment increased the apoptotic rate. as evidenced by the cDNA levels of caspase-9 and the TUNEL-assay. CONCLUSION: Anti-angiogenic treatment strategies for non-neoplastic disorders should aim to interfere with the maturation stage of the target vessels: monotherapy with VEGF-receptor inhibitor for immature vessels, and combined anti-angiogenic treatment for well developed mature vasculature.
Resumo:
Integrins are a family of transmembrane adhesion receptors that might transduce signals from the extracellular matrix into the inside of cells after ligand binding. In order to investigate whether beta3 integrins expressed in tumor cells might mediate such outside-in signaling, human MDA-MB-231 breast cancer cells that were stably transfected with either beta3 integrin or mock-transfected were investigated in a matrigel degradation assay and a grafting experiment was performed on the developing chicken chorioallantoic membrane (CAM). After cultivation on matrigel for time periods between one and five days, more matrigel was digested in the wells in which beta3 integrin expressing cells were incubated than in wells of mock-transfected cells. Furthermore, extracts of beta3 integrin expressing cells contained higher levels of MMP-2 protein as determined by immunoblotting and more MMP-2 associated gelatinase activity as detected by zymography than extracts of mock-transfected cells. Matrigel degradation and gelatinase activity as well as MMP-2 expression were elevated when beta3 integrin expressing cells were incubated in the presence of the RGD peptide (mimicking an integrin ligand). After grafting on 10 day-old embryonic chicken CAM for three to five days, beta3 integrin expressing cells assembled in spheroids showed higher rates of spreading on the CAM surface and CAM invasion as well as a significant MMP-2 up-regulation compared to mock-transfected cells. The results from the in vivo and in vitro experiments allow the conclusion that the presence of beta3 integrin in MDA-MB-231 breast cancer cells induced an increased MMP-2 expression and activity that might contribute to the enhanced invasive potential observed.
Resumo:
The range of motion of normal hips and hips with femoroacetabular impingement relative to some specific anatomic reference landmarks is unknown. We therefore described: (1) the range of motion pattern relative to landmarks; (2) the location of the impingement zones in normal and impinging hips; and (3) the influence of surgical débridement on the range of motion. We used a previously developed and validated noninvasive 3-D CT-based method for kinematic hip analysis to compare the range of motion pattern, the location of impingement, and the effect of virtual surgical reconstruction in 28 hips with anterior femoroacetabular impingement and a control group of 33 normal hips. Hips with femoroacetabular impingement had decreased flexion, internal rotation, and abduction. Internal rotation decreased with increasing flexion and adduction. The calculated impingement zones were localized in the anterosuperior quadrant of the acetabulum and were similar in the two groups and in impingement subgroups. The average improvement of internal rotation was 5.4 degrees for pincer hips, 8.5 degrees for cam hips, and 15.7 degrees for mixed impingement. This method helps the surgeon quantify the severity of impingement and choose the appropriate treatment option; it provides a basis for future image-guided surgical reconstruction in femoroacetabular impingement with less invasive techniques.
Resumo:
Background The study is part of a nationwide evaluation of complementary and alternative medicine (CAM) in primary care in Switzerland. The Objective was to identify patients' expectations and reasons governing the choice of complementary medicine compared with conventional primary care (CONV). Methods The data were derived from the PEK study (Programm Evaluation Komplementärmedizin), which was conducted in 2002–2003 with 7879 adult patients and parents of 1291 underage patients, seeking either complementary (CAM) or conventional (CONV) primary care. The study was performed as a cross-sectional survey. The respondents were asked to document their (or their children's) self-perceived health status, reasons governing their choice, and treatment expectations. Physicians were practicing conventional medicine and/or complementary methods (homeopathy, anthroposophic medicine, neural therapy, and traditional Chinese medicine). Reasons governing the choice of physician were evaluated on the basis of a three-part classification (physician-related, procedure-related, and pragmatic/other reasons) Results and Discussion Patients seeing CAM physicians tend to be younger and more often female. CAM patients referred to procedure-related reasons more frequently, whereas pragmatic reasons dominated among CONV patients. CAM respondents expected fewer adverse side effects compared to conventional care patients. Conclusion The majority of alternative medicine users appear to have chosen CAM mainly because they wish to undergo a certain procedure; additional reasons include desire for more comprehensive treatment, and expectation of fewer side-effects.
Resumo:
The present paper deals with the double crown technique in removable prosthodontics. New ceramic materials like zirconia are increasingly used in combination with CAD/CAM technologies for framework fabrication of fixed prosthesis, tooth- or implant-supported. However, zirconia is also a newly accepted material in removable prosthodontics. It replaces gold alloys for the fabrication of primary telescopic crowns. The Galvanoforming technology is preferably used to fabricate the secondary crowns. The combination of both techniques and materials results in a prosthetic reconstruction of high quality, optimum fit and good biocompatibility.
Resumo:
Implants have changed prosthodontics more than any other innovation in dentistry. Replacement of lost teeth by a fixed or removable prosthesis is considered to be a restitutio ad similem, while implants may provide a feeling of restitutio ad integrum. Implant prosthodontics means restoring function, aesthetics, and providing technology; biology and technology are combined. Placement of implants is a reconstructive, preprosthetic surgical intervention and is therefore different from most goals in oral surgery that consist of tooth extraction, treating infection and removing pathology from soft or hard tissues. Thus, implants are part of the final prosthetic treatment which encompasses functional, aesthetic and social rehabilitation. The patient's needs and functional status determine the goal of prosthetic treatment. Treatment outcomes in implant prosthodontics are survival of implants and prostheses, impact on physiological and psychological status, oral health-related impact on quality of life, and initial and maintenance costs. A variety of prosthetic solutions are available to restore the partially and completely edentulous jaw and more recently specific methods have been developed such as computer guided planning and CAD-CAM technologies. These should allow more uniform quality and passive fit of prostheses, and simultaneously enables processing of biologically well-accepted materials.