Making sense of supply chain management: acomparative study of aerospace and construction

Current recipes for learning across business sectors too often fail to recognize the embedded and contextual nature of management practice. The existing literature gives little emphasis to the symbiotic relationship between supply chain management and the broader dynamics of context. The aerospace and construction sectors are selected for comparison on the basis that they are so different. The UK aerospace sector has undergone extensive consolidation as a result of the imperatives of global competitive pressures. In contrast, the construction industry has experienced decades of fragmentation and remains highly localized. An increasing proportion of output in the aerospace sector occurs within a small number of large, globally orientated firms. In contrast, construction output is dominated by a plethora of small firms with high levels of subcontracting and a widespread reliance on self-employment. These differences have fundamental implications for the way that supply chain management is understood and implemented in the two sectors. Semi-structured interviews with practitioners from both sectors support the contention that supply chain management is more established in aerospace than construction. The introduction of prime contracting and the increasing use of framework agreements within the construction sector potentially provide a much more supportive climate for supply chain management than has traditionally prevailed. However, progress depends upon an improved continuity of workload under such arrangements.

Investigation of air quality, comfort parameters and effectiveness for two floor-level air supply systems in classrooms

The method of distributing the outdoor air in classrooms has a major impact on indoor air quality and thermal comfort of pupils. In a previous study, ([11] Karimipanah T, Sandberg M, Awbi HB. A comparative study of different air distribution systems in a classroom. In: Proceedings of Roomvent 2000, vol. II, Reading, UK, 2000. p. 1013-18; [13] Karimipanah T, Sandberg M, Awbi HB, Blomqvist C. Effectiveness of confluent jets ventilation system for classrooms. In: Idoor Air 2005, Beijing, China, 2005 (to be presented).) presented results for four and two types of air distribution systems tested in a purpose built classroom with simulated occupancy as well as computational fluid dynamics (CFD) modelling. In this paper, the same experimental setup has been used to investigate the indoor environment in the classroom using confluent jet ventilation, see also ([12]Cho YJ, Awbi HB, Karimipanah T. The characteristics of wall confluent jets for ventilated enclosures. In: Proceedings of Roomvent 2004, Coimbra, Portugal, 2004.) Measurements of air speed, air temperature and tracer gas concentrations have been carried out for different thermal conditions. In addition, 56 cases of CFD simulations have been carried to provide additional information on the indoor air quality and comfort conditions throughout the classroom, such as ventilation effectiveness, air exchange effectiveness, effect of flow rate, effect of radiation, effect of supply temperature, etc., and these are compared with measured data.

Subcontract and supply enquiries in the tender process of contractors

In the tender process, contractors often rely on subcontract and supply enquiries to calculate their bid prices. However, this integral part of the bidding process is not empirically articulated in the literature. Over 30 published materials on the tendering process of contractors that talk about enquiries were reviewed and found to be based mainly on experiential knowledge rather than systematic evidence. The empirical research here helps to describe the process of enquiries precisely, improve it in practice, and have some basis to support it in theory. Using a live participant observation case study approach, the whole tender process was shadowed in the offices of two of the top 20 UK civil engineering construction firms. This helped to investigate 15 research questions on how contractors enquire and obtain prices from subcontractors and suppliers. Forty-three subcontract enquiries and 18 supply enquiries were made across two different projects with average value of 7m. An average of 15 subcontract packages and seven supply packages was involved. Thus, two or three subcontractors or suppliers were invited to bid in each package. All enquiries were formulated by the estimator, with occasional involvement of three other personnel. Most subcontract prices were received in an average of 14 working days; and supply prices took five days. The findings show 10 main activities involved in processing enquiries and their durations, as well as wasteful practices associated with enquiries. Contractors should limit their enquiry invitations to a maximum of three per package, and optimize the waiting time for quotations in order to improve cost efficiency.

Intelligent wireless web services: context-aware computing in construction-logistics supply chain

The construction industry has incurred a considerable amount of waste as a result of poor logistics supply chain network management. Therefore, managing logistics in the construction industry is critical. An effective logistic system ensures delivery of the right products and services to the right players at the right time while minimising costs and rewarding all sectors based on value added to the supply chain. This paper reports on an on-going research study on the concept of context-aware services delivery in the construction project supply chain logistics. As part of the emerging wireless technologies, an Intelligent Wireless Web (IWW) using context-aware computing capability represents the next generation ICT application to construction-logistics management. This intelligent system has the potential of serving and improving the construction logistics through access to context-specific data, information and services. Existing mobile communication deployments in the construction industry rely on static modes of information delivery and do not take into account the worker’s changing context and dynamic project conditions. The major problems in these applications are lack of context-specificity in the distribution of information, services and other project resources, and lack of cohesion with the existing desktop based ICT infrastructure. The research works focus on identifying the context dimension such as user context, environmental context and project context, selection of technologies to capture context-parameters such wireless sensors and RFID, selection of supporting technologies such as wireless communication, Semantic Web, Web Services, agents, etc. The process of integration of Context-Aware Computing and Web-Services to facilitate the creation of intelligent collaboration environment for managing construction logistics will take into account all the necessary critical parameters such as storage, transportation, distribution, assembly, etc. within off and on-site project.

Critical flux in ultrafiltration of skimmed milk

he best operating conditions, using the critical flux concept during ultrafiltration of skimmed milk, were evaluated for tubular membranes. It was found that irreversible fouling was greatly reduced by operating at or below the critical flux, but was not totally eliminated. The critical flux of skimmed milk was found to be the weak form. The critical flux at cross flow velocity 3.4 in s(-1) for MWCO 200 kDa membrane was 56.9 kg m(-2) h(-1) while for MWCO 25 kDa membranes it was 45 kg m(2) h(-1) suggesting that membrane pore size influenced the flux. The critical flux increased with increasing wall shear stress and decreased with increasing protein concentration. Empirical equations, for predicting the critical flux (J(crit)) for skimmed milk with a protein concentration (c(b)) in the range 3-7% w/w and wall shear stress (tau(w)) in the range 7-60 Pa for MWCO 200 kDa and 25 kDa membranes were J(crit) = 5.1 (tau(w)/c(b)) and J(crit) = 4.0 (tau(w)/c(b)) respectively. In general, the rejections of protein and lactose at the critical flux were not affected by protein concentration, wall shear stress and membrane used, and they were similar to those found when operating at the limiting flux.

Glucosinolates in brassica vegetables: the influence of the food supply chain on intake, bioavailability and human health

Glucosinolates (GLSs) are found in Brassica vegetables. Examples of these sources include cabbage, Brussels sprouts, broccoli, cauliflower and various root vegetables (e.g. radish and turnip). A number of epidemiological studies have identified an inverse association between consumption of these vegetables and the risk of colon and rectal cancer. Animal studies have shown changes in enzyme activities and DNA damage resulting from consumption of Brassica vegetables or isothiocyanates, the breakdown products (BDP) of GLSs in the body. Mechanistic studies have begun to identify the ways in which the compounds may exert their protective action but the relevance of these studies to protective effects in the human alimentary tract is as yet unproven. In vitro studies with a number of specific isothiocyanates have suggested mechanisms that might be the basis of their chemoprotective effects. The concentration and composition of the GLSs in different plants, but also within a plant (e.g. in the seeds, roots or leaves), can vary greatly and also changes during plant development. Furthermore, the effects of various factors in the supply chain of Brassica vegetables including breeding, cultivation, storage and processing on intake and bioavailability of GLSs are extensively discussed in this paper.

Effect of minerals on casein micelle stability of cows' milk

The effects of minerals on casein micelle stability of individual cows' milk, throughout a complete lactation, were investigated. Calcium and calcium ions, magnesium, phosphorus, sodium, potassium and citrate contents were analysed, together with the following physical properties of milk; pH, ethanol stability, rennet clotting time and coagulum firmness. There was an inverse non-linear relationship between free calcium ion concentration and ethanol stability (ES; r=0.84). Rennet coagulation time showed a weaker relationship with free calcium ion concentration (r=0.44) but a stronger relationship with pH (r=0.66). In addition, samples containing higher amounts of free calcium ions produced a firmer gel. Citrate in natural samples acts as a stabilizing factor, as it slightly improves milk stability. Potassium, on the other hand, exhibited a negative correlation, but only with rennet clotting time (r=-0.52). Throughout lactation the average values were; free Ca 21 concentration 1.88 mm,, pH 6.63, ES 83.2% and clotting time 13.6 min. The equilibrium relationship between pH and free Ca2+ concentration was investigated by adjusting milk pH from 5.9 to 7.1, using acid and alkali. There was a good inverse linear relationship between pH and log (free Ca 21) for individual milk samples, with a gradient of -0.62 and a standard deviation of 0.042.

A study of the pH of individual milk samples

The pH of 285 milk samples was measured from early, middle and late stages of lactation. In total, 35 individual cows were used in this study. It was found that the average pH value for all individual samples analysed was 6.63 +/- 0.08. There was no significant difference (P > 0.05) in mean pH between early, middle and late lactation. The overall data and that for early lactation displayed normal distributions.

Changes in physical properties of bovine milk from the colostrum period to early lactation

The aim of this study was to analyze individual cows' samples from the colostrum, postcolostrum, and early lactation periods to investigate how milk composition, physical properties, stability, and suitability for processing change throughout this period. Attention was paid to the first week postpartum in which the composition of bovine mammary secretion can change markedly. Properties including pH, titratable acidity, ethanol stability (ES), rennet clotting time, and casein micelle size were analyzed, together with some compositional factors such as fat, total protein, lactose, total and ionic calcium, magnesium, citrate, phosphorus, sodium, and potassium. Total Ca (36.2 mM) and free ionic Ca (2.58 mM), Mg (5.9 mM), P (32.2 mM), and Na (24.1 mM) appeared to be high on d 5 postpartum, having decreased substantially over the first 5 d; they gradually decreased thereafter. The average pH on d 5 was only 6.49, compared with 6.64 at 1 mo postpartum. Stability measurements showed that the average ES on d 5 was 70% and the rennet clotting time was 12.2 min, which were significantly lower than values at later stages. A number of milk properties including ES, pH, protein content, and Ca2+ concentration could be useful for identifying the point of transition from colostrum to the early lactation period. Knowing the composition and physical properties of colostrum and postcolostrum secretions will help establish when such milk is suitable for processing and determine the best use for that milk.

Predictions of some product parameters based on the processing conditions of ultra-high-temperature milk plants

The temperature-time profiles of 22 Australian industrial ultra-high-temperature (UHT) plants and 3 pilot plants, using both indirect and direct heating, were surveyed. From these data, the operating parameters of each plant, the chemical index C*, the bacteriological index B* and the predicted changes in the levels of beta-lactoglobulin, alpha-lactalbumin, lactulose, furosine and browning were determined using a simulation program based on published formulae and reaction kinetics data. There was a wide spread of heating conditions used, some of which resulted in a large margin of bacteriological safety and high chemical indices. However, no conditions were severe enough to cause browning during processing. The data showed a clear distinction between the indirect and direct heating plants. They also indicated that degree of denaturation of alpha-lactalbumin varied over a wide range and may be a useful discriminatory index of heat treatment. Application of the program to pilot plants illustrated its value in determining processing conditions in these plants to simulate the conditions in industrial UHT plants. (C) 2008 Elsevier Ltd. All rights reserved.

Effect of forage type and proportion of concentrate in the diet on milk fatty acid composition in cows given sunflower oil and fish oil

Based on the potential benefits of cis-9, trans- 11 conjugated linoleic acid (CLA) for human health there is a need to develop effective strategies for enhancing milk fat CLA concentrations. In this experiment, the effect of forage type and level of concentrate in the diet on milk fatty acid composition was examined in cows given a mixture of fish oil and sunflower oil. Four late lactation Holstein-British Friesian cows were used in a 4 x 4 Latin-square experiment with a 2 x 2 factorial arrangement of treatments and 21-day experimental periods. Treatments consisted of grass (G) or maize (M) silage supplemented with low (L) or high (H) levels of concentrates (65: 35 and 35: 65; forage: concentrate ratio, on a dry matter (DM) basis, respectively) offered as a total mixed ration at a restricted level of intake (20 kg DM per day). Lipid supplements (30 g/kg DM) containing fish oil and sunflower oil (2: 3 w/w) were offered during the last 14 days of each experimental period. Treatments had no effect on total DM intake, milk yield, milk constituent output or milk fat content, but milk protein concentrations were lower (P<0.05) for G than M diets (mean 43.0 and 47.3 g/kg, respectively). Compared with grass silage, milk fat contained higher (P<0.05) amounts Of C-12: 0, C-14: 0, trans C-18:1 and long chain >= C20 (n-3) polyunsaturated fatty acids (PUFA) and lower (P<0.05) levels Of C-18:0 and trans C-18:2 when maize silage was offered. Increases in the proportion of concentrate in the diet elevated (P<0.05) C-18:2 (n-6) and long chain >= C20 (n-3) PUFA content, but reduced (P<0.05) the amount Of C-18:3 (n-3). Concentrations of trans-11 C-18:1 in milk were independent of forage type, but tended (P<0.10) to be lower for high concentrate diets (mean 7.2 and 4.0 g/100 g fatty acids, for L and H respectively). Concentrations of trans-10 C-18:1 were higher (P<0.05) in milk from maize compared with grass silage (mean 10.3 and 4.1 g/100 g fatty acids, respectively) and increased in response to high levels of concentrates in the diet (mean 4.1 and 10.3 g/100 g fatty acids, for L and H, respectively). Forage type had no effect (P>0.05) on total milk conjugated linoleic acid (CLA) (2.7 and 2.8 g/100 g fatty acids, for M and G, respectively) or cis-9, trans-11 CLA content (2.2 and 2.4 g/100 g fatty acids). Feeding high concentrate diets tended (P<0.10) to decrease total CLA (3.3 and 2.2 g/100 g fatty acids, for L and H, respectively) and cis-9, trans-11 CLA (2.9 and 1/7 g/100 g fatty acids) concentrations and increase milk trans-9, cis-11 CLA and trans-10, cis-12 CLA content. In conclusion, the basal diet is an important determinant of milk fatty acid composition when a supplement of fish oil and sunflower oil is given.

Serpa cheese: technological, biochemical and microbiological characterisation of a PDO ewe's milk cheese coagulated with Cynara cardunculus L

Portugal has a strong tradition of cheesemaking from raw ewe's milk; most of these cheeses are still made on a traditional farmhouse scale. Their production is protected by Protected Designation of Origin (PDO) but the specific biochemical aspects of the majority still need to be characterised. Two different cheesemaking procedures, traditional and semi-industrial, were compared technologically, biochemically and microbiologically. It was observed that, despite the highly significant difference between artisanal and semi-industrial cheeses (P < 0.001), both products were within the limits of national regulations for most parameters except maturation temperature, humidity and the value for the maturation index. Although the present study was not fully representative of the region, the results obtained suggest that the specific regulations for Serpa cheese should be revised and that other parameters, such as moisture and salt-in-moisture content, which are very much dependent on the cheesemaking process, should be included in order to characterise better this traditional cheese.