929 resultados para Michael Bury
Resumo:
Both clinical practice and clinical research settings can require successive administrations of a memory test, particularly when following the trajectory of suspected memory decline in older adults. However, relatively few verbal episodic memory tests have alternative forms. We set out to create a broad based memory test to allow for the use of an essentially unlimited number of alternative forms. Four tasks for inclusion in such a test were developed. These tasks varied the requirement for recall as opposed to recognition, the need to form an association between unrelated words, and the need to discriminate the most recent list from earlier lists, all of which proved useful. A total of 115 participants completed the battery of tests and were used to show that the test could differentiate between older and younger adults; a sub-sample of 73 participants completed alternative forms of the tests to determine test-retest reliability and the amount of learning to learn.
Resumo:
Cognitive-energetical theories of information processing were used to generate predictions regarding the relationship between workload and fatigue within and across consecutive days of work. Repeated measures were taken on board a naval vessel during a non-routine and a routine patrol. Data were analyzed using growth curve modeling. Fatigue demonstrated a non-monotonic relationship within days in both patrols – fatigue was high at midnight, started decreasing until noontime and then increased again. Fatigue increased across days towards the end of the non-routine patrol, but remained stable across days in the routine patrol. The relationship between workload and fatigue changed over consecutive days in the non-routine patrol. At the beginning of the patrol, low workload was associated with fatigue. At the end of the patrol, high workload was associated with fatigue. This relationship could not be tested in the routine patrol, however it demonstrated a non-monotonic relationship between workload and fatigue – low and high workloads were associated with the highest fatigue. These results suggest that the optimal level of workload can change over time and thus have implications for the management of fatigue.
Resumo:
While there is growing use of online counselling, little is known about its interactional organisation and how it compares to telephone counselling. This is despite past research suggesting that both counsellors and clients report the impact of the different modalities on the presentation and management of the counselling interaction. This paper compares the interactional affordances of telephone and online web counselling in opening sequences on Kids Help Line, a 24-hour Australian counselling service for children and young people up to the age of 25. We examine two ways that counsellors show active listening through response tokens and formulations. The analysis describes how counsellors’ use of minimal response tokens facilitate the clients’ problem presentation and are used in the management of turn taking and sequence organisation. For example, counsellors use the response token Mm hm to show that they understand that the client’s unit of talk to is not yet complete, and to affirm or invite the client to continue speaking. Formulations in phone and web counselling are another way that counsellors display active listening to re-present stretches of the clients’ preceding talk. In phone and web counselling, however, the respective modalities can complicate matters of turn transition and sequence organisation. By examining actual phone and online counselling sessions, this paper offers empirical demonstrations of the interactional affordances of phone and online counselling, and shows how the institutional practice of active listening is accomplished across different counselling modalities
Resumo:
The need for large scale environmental monitoring to manage environmental change is well established. Ecologists have long used acoustics as a means of monitoring the environment in their field work, and so the value of an acoustic environmental observatory is evident. However, the volume of data generated by such an observatory would quickly overwhelm even the most fervent scientist using traditional methods. In this paper we present our steps towards realising a complete acoustic environmental observatory - i.e. a cohesive set of hardware sensors, management utilities, and analytical tools required for large scale environmental monitoring. Concrete examples of these elements, which are in active use by ecological scientists, are also presented
Resumo:
To allocate and size capacitors in a distribution system, an optimization algorithm, called Discrete Particle Swarm Optimization (DPSO), is employed in this paper. The objective is to minimize the transmission line loss cost plus capacitors cost. During the optimization procedure, the bus voltage, the feeder current and the reactive power flowing back to the source side should be maintained within standard levels. To validate the proposed method, the semi-urban distribution system that is connected to bus 2 of the Roy Billinton Test System (RBTS) is used. This 37-bus distribution system has 22 loads being located in the secondary side of a distribution substation (33/11 kV). Reducing the transmission line loss in a standard system, in which the transmission line loss consists of only about 6.6 percent of total power, the capabilities of the proposed technique are seen to be validated.
Resumo:
Workflow Management Systems (WfMSs) enable the development and maintenance of workflow specifications at design time and their execution and monitoring at runtime. The open source WfMS YAWL supports the YAWL language – a formally defined language based on Petri nets which offers comprehensive support for control-flow and resource patterns. In addition, the YAWL system provides extensive support for process flexibility, in particular for process configuration, exception handling, dynamic workflow and declarative workflow. Due to its formal foundation, sophisticated verification support can also be achieved. This paper presents the YAWL system and its main applications.
Resumo:
The purpose of this study is to investigate how secondary school media educators might best meet the needs of students who prefer practical production work to ‘theory’ work in media studies classrooms. This is a significant problem for a curriculum area that claims to develop students’ media literacies by providing them with critical frameworks and a metalanguage for thinking about the media. It is a problem that seems to have become more urgent with the availability of new media technologies and forms like video games. The study is located in the field of media education, which tends to draw on structuralist understandings of the relationships between young people and media and suggests that students can be empowered to resist media’s persuasive discourses. Recent theoretical developments suggest too little emphasis has been placed on the participatory aspects of young people playing with, creating and gaining pleasure from media. This study contributes to this ‘participatory’ approach by bringing post structuralist perspectives to the field, which have been absent from studies of secondary school media education. I suggest theories of media learning must take account of the ongoing formation of students’ subjectivities as they negotiate social, cultural and educational norms. Michel Foucault’s theory of ‘technologies of the self’ and Judith Butler’s theories of performativity and recognition are used to develop an argument that media learning occurs in the context of students negotiating various ‘ethical systems’ as they establish their social viability through achieving recognition within communities of practice. The concept of ‘ethical systems’ has been developed for this study by drawing on Foucault’s theories of discourse and ‘truth regimes’ and Butler’s updating of Althusser’s theory of interpellation. This post structuralist approach makes it possible to investigate the ways in which students productively repeat and vary norms to creatively ‘do’ and ‘undo’ the various media learning activities with which they are required to engage. The study focuses on a group of year ten students in an all boys’ Catholic urban school in Australia who undertook learning about video games in a three-week intensive ‘immersion’ program. The analysis examines the ethical systems operating in the classroom, including formal systems of schooling, informal systems of popular cultural practice and systems of masculinity. It also examines the students’ use of semiotic resources to repeat and/or vary norms while reflecting on, discussing, designing and producing video games. The key findings of the study are that students are motivated to learn technology skills and production processes rather than ‘theory’ work. This motivation stems from the students’ desire to become recognisable in communities of technological and masculine practice. However, student agency is not only possible through critical responses to media, but through performative variation of norms through creative ethical practices as students participate with new media technologies. Therefore, the opportunities exist for media educators to create the conditions for variation of norms through production activities. The study offers several implications for media education theory and practice including: the productive possibilities of post structuralism for informing ways of doing media education; the importance of media teachers having the autonomy to creatively plan curriculum; the advantages of media and technology teachers collaborating to draw on a broad range of resources to develop curriculum; the benefits of placing more emphasis on students’ creative uses of media; and the advantages of blending formal classroom approaches to media education with less formal out of school experiences.
Resumo:
Background: Pseudomonas aeruginosa is the most common bacterial pathogen in cystic fibrosis (CF) patients. Current infection control guidelines aim to prevent transmission via contact and respiratory droplet routes and do not consider the possibility of airborne transmission. We hypothesized that with coughing, CF subjects produce viable, respirable bacterial aerosols. Methods: Cross-sectional study of 15 children and 13 adults with CF, 26 chronically infected with P. aeruginosa. A cough aerosol sampling system enabled fractioning of respiratory particles of different size, and culture of viable Gram negative non-fermentative bacteria. We collected cough aerosols during 5 minutes voluntary coughing and during a sputum induction procedure when tolerated. Standardized quantitative culture and genotyping techniques were used. Results: P. aeruginosa was isolated in cough aerosols of 25 (89%) subjects of whom 22 produced sputum samples. P. aeruginosa from sputum and paired cough aerosols were indistinguishable by molecular typing. In 4 cases the same genotype was isolated from ambient room air. Approximately 70% of viable aerosols collected during voluntary coughing were of particles ≤ 3.3 microns aerodynamic diameter. P. aeruginosa, Burkholderia cenocepacia Stenotrophomonas maltophilia and Achromobacter xylosoxidans were cultivated from respiratory particles in this size range. Positive room air samples were associated with high total counts in cough aerosols (P=0.003). The magnitude of cough aerosols were associated with higher FEV1 (r=0.45, P=0.02) and higher quantitative sputum culture results (r=0.58, P=0.008). Conclusion: During coughing, CF patients produce viable aerosols of P. aeruginosa and other Gram negative bacteria of respirable size range, suggesting the potential for airborne transmission.
Theoretical and numerical investigation of plasmon nanofocusing in metallic tapered rods and grooves
Resumo:
Effective focusing of electromagnetic (EM) energy to nanoscale regions is one of the major challenges in nano-photonics and plasmonics. The strong localization of the optical energy into regions much smaller than allowed by the diffraction limit, also called nanofocusing, offers promising applications in nano-sensor technology, nanofabrication, near-field optics or spectroscopy. One of the most promising solutions to the problem of efficient nanofocusing is related to surface plasmon propagation in metallic structures. Metallic tapered rods, commonly used as probes in near field microscopy and spectroscopy, are of a particular interest. They can provide very strong EM field enhancement at the tip due to surface plasmons (SP’s) propagating towards the tip of the tapered metal rod. A large number of studies have been devoted to the manufacturing process of tapered rods or tapered fibers coated by a metal film. On the other hand, structures such as metallic V-grooves or metal wedges can also provide strong electric field enhancements but manufacturing of these structures is still a challenge. It has been shown, however, that the attainable electric field enhancement at the apex in the V-groove is higher than at the tip of a metal tapered rod when the dissipation level in the metal is strong. Metallic V-grooves also have very promising characteristics as plasmonic waveguides. This thesis will present a thorough theoretical and numerical investigation of nanofocusing during plasmon propagation along a metal tapered rod and into a metallic V-groove. Optimal structural parameters including optimal taper angle, taper length and shape of the taper are determined in order to achieve maximum field enhancement factors at the tip of the nanofocusing structure. An analytical investigation of plasmon nanofocusing by metal tapered rods is carried out by means of the geometric optics approximation (GOA), which is also called adiabatic nanofocusing. However, GOA is applicable only for analysing tapered structures with small taper angles and without considering a terminating tip structure in order to neglect reflections. Rigorous numerical methods are employed for analysing non-adiabatic nanofocusing, by tapered rod and V-grooves with larger taper angles and with a rounded tip. These structures cannot be studied by analytical methods due to the presence of reflected waves from the taper section, the tip and also from (artificial) computational boundaries. A new method is introduced to combine the advantages of GOA and rigorous numerical methods in order to reduce significantly the use of computational resources and yet achieve accurate results for the analysis of large tapered structures, within reasonable calculation time. Detailed comparison between GOA and rigorous numerical methods will be carried out in order to find the critical taper angle of the tapered structures at which GOA is still applicable. It will be demonstrated that optimal taper angles, at which maximum field enhancements occur, coincide with the critical angles, at which GOA is still applicable. It will be shown that the applicability of GOA can be substantially expanded to include structures which could be analysed previously by numerical methods only. The influence of the rounded tip, the taper angle and the role of dissipation onto the plasmon field distribution along the tapered rod and near the tip will be analysed analytically and numerically in detail. It will be demonstrated that electric field enhancement factors of up to ~ 2500 within nanoscale regions are predicted. These are sufficient, for instance, to detect single molecules using surface enhanced Raman spectroscopy (SERS) with the tip of a tapered rod, an approach also known as tip enhanced Raman spectroscopy or TERS. The results obtained in this project will be important for applications for which strong local field enhancement factors are crucial for the performance of devices such as near field microscopes or spectroscopy. The optimal design of nanofocusing structures, at which the delivery of electromagnetic energy to the nanometer region is most efficient, will lead to new applications in near field sensors, near field measuring technology, or generation of nanometer sized energy sources. This includes: applications in tip enhanced Raman spectroscopy (TERS); manipulation of nanoparticles and molecules; efficient coupling of optical energy into and out of plasmonic circuits; second harmonic generation in non-linear optics; or delivery of energy to quantum dots, for instance, for quantum computations.
Resumo:
Objective: This study examines the association between maternal anxiety from pregnancy to 5 years and child attention problems at 5 and 14 years. Method: Birth cohort of 3,982 individuals born in Brisbane between 1981 and 1983 are assessed. Self-reported measures of maternal anxiety are assessed at four time points. Maternal reports of child attention problems using Achenbach’s Child Behavior Checklist are assessed at 5 and 14 years. Results: Children of mothers experiencing anxiety during or after pregnancy are at greater risk of experiencing attention problems at 5 and 14 years. After adjusting for maternal age and child’s gender, antenatal anxiety is strongly associated with persistent attention problems (OR = 3.65, 95% CI = 2.19, 6.07). Children with chronically anxious mothers are 5.67 (95% CI = 3.56, 9.03) times more likely to have persistent attention problems. These associations remain consistent after adjusting for potential confounders. Conclusions: Maternal anxiety appears to increase the rate of child attention problems and identifies a need for treatment programs to have a dual focus—the mother and her child. (J. of Att. Dis. 2009; XX(X) 1-XX)
Resumo:
Objective: Community surveys have shown that many otherwise well individuals report delusional-like experiences. The authors examined psychopathology during childhood and adolescence as a predictor of delusional-like experiences in young adulthood. ---------- Method: The authors analyzed prospective data from the Mater-University of Queensland Study of Pregnancy, a birth cohort of 3,617 young adults born between 1981 and 1983. Psychopathology was measured at ages 5 and 14 using the Child Behavior Checklist (CBCL) and at age 14 using the Youth Self-Report (YSR). Delusional-like experiences were measured at age 21 using the Peters Delusional Inventory. The association between childhood and adolescent symptoms and later delusional-like experiences was examined using logistic regression. ---------- Results: High CBCL scores at ages 5 and 14 predicted high levels of delusional-like experiences at age 21 (odds ratios for the highest versus the other quartiles combined were 1.25 and 1.85, respectively). Those with YSR scores in the highest quartile at age 14 were nearly four times as likely to have high levels of delusional-like experiences at age 21 (odds ratio=3.71). Adolescent-onset psychopathology and continuous psychopathology through both childhood and adolescence strongly predicted delusional-like experiences at age 21. Hallucinations at age 14 were significantly associated with delusional-like experiences at age 21. The general pattern of associations persisted when adjusted for previous drug use or the presence of nonaffective psychoses at age 21. ---------- Conclusion: Psychopathology during childhood and adolescence predicts adult delusional-like experiences. Understanding the biological and psychosocial factors that influence this developmental trajectory may provide clues to the pathogenesis of psychotic-like experiences.
Resumo:
Objective: The emergency medical system (EMS) can be defined as a comprehensive, coordinated and integrated system of care for patients suffering acute illness and injury. The aim of the present paper is to describe the evolution of the Queensland Emergency Medical System (QEMS) and to recommend a strategic national approach to EMS development. Methods: Following the formation of the Queensland Ambulance Service in 1991, a state EMS committee was formed. This committee led the development and approval of the cross portfolio QEMS policy framework that has resulted in dynamic policy development, system monitoring and evaluation. This framework is led by the Queensland Emergency Medical Services Advisory Committee. Results: There has been considerable progress in the development of all aspects of the EMS in Queensland. These developments have derived from the improved coordination and leadership that QEMS provides and has resulted in widespread satisfaction by both patients and stakeholders. Conclusions: The strategic approach outlined in the present paper offers a model for EMS arrangements throughout Australia. We propose that the Council of Australian Governments should require each state and Territory to maintain an EMS committee. These state EMS committees should have a broad portfolio of responsibilities. They should provide leadership and direction to the development of the EMS and ensure coordination and quality of outcomes. A national EMS committee with broad representation and broad scope should be established to coordinate the national development of Australia's EMS.
Resumo:
In late 2004, the concept of the creative industries arrived in China. It was warmly welcomed in Shanghai then subsequently adopted with some degree of caution in Beijing. In the years since, officials, scholars, practitioners, entrepreneurs and developers have exploited of the idea of creative industries, and a range of associated terms, to construct an alternative vision of an emerging China. In 2009, Li Wuwei, the Director of the Shanghai Creative Industries Association, himself a leading player in national political reform, released a book titled Creativity is Changing China (Chuangyi gaibian Zhongguo), subsequently translated as Creative Industries Are Changing China in English. The paper investigates the uptake of the creative industries in China and asks: can they really change China, or are they just rearranging the cultural landscape in some cities?