A systematic study of the microwave and thermal cure kinetics of the TGDDM/DDS and TGDDM/DDM epoxy-amine resin systems

The microwave and thermal cure processes for the epoxy-amine systems N,N,N',N'-tetraglycidyl-4,4'-diaminodiphenyl methane (TGDDM) with diaminodiphenyl sulfone (DDS) and diaminodiphenyl methane (DDM) have been investigated. The DDS system was studied at a single cure temperature of 433 K and a single stoichiometry of 27 wt% and the DDM system was studied at two stoichiometries, 19 and 32 wt%, and a range temperatures between 373 and 413 K. The best values the kinetic rate parameters for the consumption of amines have been determined by a least squares curve Ft to a model for epoxy-amine cure. The activation energies for the rate parameters for the MY721/DDM system were determined as was the overall activation energy for the cure reaction which was found to be 62 kJ mol(-1). No evidence was found for any specific effect of the microwave radiation on the rate parameters, and the systems were both found to be characterized by a negative substitution effect. Copyright (C) 2001 John Wiley & Sons, Ltd.

The copolymerization of N-vinyl-2-pyrrolidone with 2-hydroxyethyl methacrylate

The bulk free radical copolymerization of 2-hydroxyethyl methacrylate (HEMA) with N-vinyl-2-pyrrolidone (VP) was carried out to low conversions at 50 degreesC, using benzoyl peroxide (BPO) as initiator. The compositions of the copolymers; were determined using C-13 NMR spectroscopy. The conversion of monomers to polymers was studied using FT-NIR spectroscopy in order to predict the extent of conversion of monomer to polymer. From model fits to the composition data, a statistical F-test revealed that die penultimate model describes die copolymerization better than die terminal model. Reactivity ratios were calculated by using a non-linear least squares analysis (NLLS) and r(H) = 8.18 and r(V) = 0.097 were found to be the best fit values of the reactivity ratios for the terminal model and r(HH) = 12.0, r(VH) = 2.20, r(VV) = 0.12 and r(HV) = 0.03 for the penultimate model. Predictions were made for changes in compositions as a function of conversion based upon the terminal and penultimate models.

A systematic study of the microwave and thermal cure kinetics of the DGEBA/DDS and DGEBA/DDM epoxy-amine resin systems

The microwave and thermal cure processes for the epoxy-amine systems (epoxy resin diglycidyl ether of bisphenol A, DGEBA) with 4,4'-diaminodiphenyl sulphone (DDS) and 4,4'-diaminodiphenyl methane (DDM) have been investigated for 1:1 stoichiometries by using fiber-optic FT-NIR spectroscopy. The DGEBA used was in the form of Ciba-Geigy GY260 resin. The DDM system was studied at a single cure temperature of 373 K and a single stoichiometry of 20.94 wt% and the DDS system was studied at a stoichiometry of 24.9 wt% and a range of temperatures between 393 and 443 K. The best values of the kinetic rate parameters for the consumption of amines have been determined by a least squares curve fit to a model for epoxy/amine cure. The activation energies for the polymerization of the DGEBA/DDS system were determined for both cure processes and found to be 66 and 69 kJ mol(-1) for the microwave and thermal cure processes, respectively. No evidence was found for any specific effect of the microwave radiation on the rate parameters, and the systems were both found to be characterized by a negative substitution effect. Copyright (C) 2002 John Wiley Sons, Ltd.

A monolithic smoothing-gap algorithm for contact-impact based on the signed distance function

A new algorithm has been developed for smoothing the surfaces in finite element formulations of contact-impact. A key feature of this method is that the smoothing is done implicitly by constructing smooth signed distance functions for the bodies. These functions are then employed for the computation of the gap and other variables needed for implementation of contact-impact. The smoothed signed distance functions are constructed by a moving least-squares approximation with a polynomial basis. Results show that when nodes are placed on a surface, the surface can be reproduced with an error of about one per cent or less with either a quadratic or a linear basis. With a quadratic basis, the method exactly reproduces a circle or a sphere even for coarse meshes. Results are presented for contact problems involving the contact of circular bodies. Copyright (C) 2002 John Wiley Sons, Ltd.

Levene tests of homogeneity of variance for general block and treatment designs

This article develops a weighted least squares version of Levene's test of homogeneity of variance for a general design, available both for univariate and multivariate situations. When the design is balanced, the univariate and two common multivariate test statistics turn out to be proportional to the corresponding ordinary least squares test statistics obtained from an analysis of variance of the absolute values of the standardized mean-based residuals from the original analysis of the data. The constant of proportionality is simply a design-dependent multiplier (which does not necessarily tend to unity). Explicit results are presented for randomized block and Latin square designs and are illustrated for factorial treatment designs and split-plot experiments. The distribution of the univariate test statistic is close to a standard F-distribution, although it can be slightly underdispersed. For a complex design, the test assesses homogeneity of variance across blocks, treatments, or treatment factors and offers an objective interpretation of residual plot.

Finite difference time domain (FDTD) method for modeling the effect of switched gradients on the human body in MRI

Numerical modeling of the eddy currents induced in the human body by the pulsed field gradients in MRI presents a difficult computational problem. It requires an efficient and accurate computational method for high spatial resolution analyses with a relatively low input frequency. In this article, a new technique is described which allows the finite difference time domain (FDTD) method to be efficiently applied over a very large frequency range, including low frequencies. This is not the case in conventional FDTD-based methods. A method of implementing streamline gradients in FDTD is presented, as well as comparative analyses which show that the correct source injection in the FDTD simulation plays a crucial rule in obtaining accurate solutions. In particular, making use of the derivative of the input source waveform is shown to provide distinct benefits in accuracy over direct source injection. In the method, no alterations to the properties of either the source or the transmission media are required. The method is essentially frequency independent and the source injection method has been verified against examples with analytical solutions. Results are presented showing the spatial distribution of gradient-induced electric fields and eddy currents in a complete body model.

A new method for analysing the equilibrium and time-dependent behaviour of Markovian models

Many large-scale stochastic systems, such as telecommunications networks, can be modelled using a continuous-time Markov chain. However, it is frequently the case that a satisfactory analysis of their time-dependent, or even equilibrium, behaviour is impossible. In this paper, we propose a new method of analyzing Markovian models, whereby the existing transition structure is replaced by a more amenable one. Using rates of transition given by the equilibrium expected rates of the corresponding transitions of the original chain, we are able to approximate its behaviour. We present two formulations of the idea of expected rates. The first provides a method for analysing time-dependent behaviour, while the second provides a highly accurate means of analysing equilibrium behaviour. We shall illustrate our approach with reference to a variety of models, giving particular attention to queueing and loss networks. (C) 2003 Elsevier Ltd. All rights reserved.

Transações com partes relacionadas : determinantes e impactos no desempenho das empresas

A literatura internacional que analisa os fatores impactantes das transações com partes relacionadas concentra-se no Reino Unido, nos EUA e no continente asiático, sendo o Brasil um ambiente pouco investigado. Esta pesquisa tem por objetivo investigar tanto os fatores impactantes dos contratos com partes relacionadas, quanto o impacto dessas transações no desempenho das empresas brasileiras. Estudos recentes que investigaram as determinantes das transações com partes relacionadas (TPRs), assim como seus impactos no desempenho das empresas, levaram em consideração as vertentes apresentadas por Gordon, Henry e Palia (2004): (a) de conflitos de interesses, as quais apoiam a visão de que as TPRs são danosas para os acionistas minoritários, implicando expropriação da riqueza deles, por parte dos controladores (acionistas majoritários); e (b) transações eficientes que podem ser benéficas às empresas, atendendo, desse modo, aos objetivos econômicos subjacentes delas. Esta pesquisa apoia-se na vertente de conflito de interesses, com base na teoria da agência e no fato de que o cenário brasileiro apresenta ter como característica uma estrutura de propriedade concentrada e ser um país emergente com ambiente legal caracterizado pela baixa proteção aos acionistas minoritários. Para operacionalizar a pesquisa, utilizou-se uma amostra inicial composta de 70 empresas com ações listadas na BM&FBovespa, observando o período de 2010 a 2012. Os contratos relacionados foram identificados e quantificados de duas formas, de acordo com a metodologia aplicada por Kohlbeck e Mayhew (2004; 2010) e Silveira, Prado e Sasso (2009). Como principais determinantes foram investigadas proxies para captar os efeitos dos mecanismos de governança corporativa e ambiente legal, do desempenho das empresas, dos desvios entre direitos sobre controle e direitos sobre fluxo de caixa e do excesso de remuneração executiva. Também foram adicionadas variáveis de controle para isolar as características intrínsecas das firmas. Nas análises econométricas foram estimados os modelos pelos métodos de Poisson, corte transversal agrupado (Pooled-OLS) e logit. A estimação foi feita pelo método dos mínimos quadrados ordinários (MQO), e para aumentar a robustez das estimativas econométricas, foram utilizadas variáveis instrumentais estimadas pelo método dos momentos generalizados (MMG). As evidências indicam que os fatores investigados impactam diferentemente as diversas medidas de TPRs das empresas analisadas. Verificou-se que os contratos relacionados, em geral, são danosos às empresas, impactando negativamente o desempenho delas, desempenho este que é aumentado pela presença de mecanismos eficazes de governança corporativa. Os resultados do impacto das medidas de governança corporativa e das características intrínsecas das firmas no desempenho das empresas são robustos à presença de endogeneidade com base nas regressões com variáveis instrumentais.

Efeitos do comitê de auditoria e do conselho fiscal na qualidade da informação contábil no Brasil

Esta dissertação foi desenvolvida com o objetivo de investigar os efeitos da instalação e das características do Conselho Fiscal e do Comitê de Auditoria sobre a qualidade das informações contábeis no Brasil. As características estudadas foram à independência e a qualificação dos membros. As proxies da qualidade da informação contábil foram relevância, tempestividade e conservadorismo condicional. A amostra utilizada foi composta por empresas brasileiras, listadas na Bolsa de Valores, Mercadorias e Futuros de São Paulo (BM&FBovespa), com liquidez anual superior a 0,001, no período de 2010 a 2013. Os dados foram coletados na base de dados Comdinheiro e nos Formulários de Referência das empresas, disponíveis no sítio eletrônico da Comissão de Valores Mobiliários (CVM) ou BM&FBovespa. Os modelos de qualidade da informação foram adaptados ao recorte metodológico e estimados pelo método dos mínimos quadrados ordinários (MQO), com erros-padrão robustos clusterizados por firma. Os resultados revelaram efeitos da instalação dos órgãos analisados sobre as proxies de qualidade da informação contábil. A instalação do Conselho Fiscal impactou positivamente a relevância do patrimônio líquido, enquanto a instalação do Comitê de Auditoria, a relevância do lucro. Esses resultados podem indicar diferenças no direcionamento da atenção desses órgãos: em proteger o patrimônio da entidade para os acionistas (Conselho Fiscal) ou em assegurar números mais confiáveis sobre o desempenho dos administradores (Comitê de Auditoria). Paralelamente, os resultados para a instalação do Conselho Fiscal de forma permanente inferiu força desse órgão como mecanismo de controle, ao invés da instalação somente a pedido dos acionistas. Já, a implementação do Conselho Fiscal Turbinado se mostrou ineficiente no controle da qualidade das informações contábeis. Na análise das características, a independência dos membros do Comitê de Auditoria impactou a relevância do lucro. Ao passo que a independência do Conselho Fiscal impactou a relevância do patrimônio líquido e o conservadorismo condicional (reconhecimento oportuno de perdas econômicas). Essas associações foram mais significantes quando os membros do Conselho Fiscal eram independentes dos acionistas controladores. Na análise da qualificação dos membros, foram encontradas evidências positivas na relação entre a relevância do patrimônio líquido e a maior proporção de membros do Conselho Fiscal com qualificação em Business (Contabilidade, Administração e Economia). O conservadorismo condicional foi maior na medida em que a qualificação dos membros do Conselho Fiscal convergia para a Contabilidade. Os resultados da qualificação dos membros do Comitê de Auditoria demonstraram relevância do lucro na presença de, ao menos, um Contador e na maior proporção de membros com qualificação tanto em Contabilidade como em Business; sendo mais significante conforme a qualificação dos membros do Comitê de Auditoria convergia para a Contabilidade.

An appraisal of the health planning method proposed by the Pan-American Health Organization for Latin America

A brief description of the main features of the health planning technique developed by the "Centro de Estudios del Desarrollo" (CENDES) in Venezuela, and proposed by the Pan-American Health Organization for use in Latin America, is presented. This presentation is followed by an appraisal of the planning method which includes comments both upon its positive aspects and upon its negative points. Comments are also made referring to other recent publications of the WHO/PAHO on health planning. In conclusion, the CENDES technique is considered a health planning method of great potential for use especially in underdeveloped areas, the success of its application depending upon the hability of the health planners to introduce the necessary modifications to adapt to the local circunstamces.

Geographical, temporal and environmental determinants of bryophyte species richness in the Macaronesian Islands

Copyright: © 2014 Aranda et al. This is an open-access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.

Flow-injection potentiometric method for the routine determination of chloride: application to bread analysis

Bread is consumed worldwide by man, thus contributing to the regular ingestion of certain inorganic species such as chloride. It controls the blood pressure if associated to a sodium intake and may increase the incidence of stomach ulcer. Its routine control should thus be established by means of quick and low cost procedures. This work reports a double- channel flow injection analysis (FIA) system with a new chloride sensor for the analysis of bread. All solutions are prepared in water and necessary ionic strength adjustments are made on-line. The body of the indicating electrode is made from a silver needle of 0.8 mm i.d. with an external layer of silver chloride. These devices were constructed with different lengths. Electrodes of 1.0 to 3.0 cm presented better analytical performance. The calibration curves under optimum conditions displayed Nernstian behaviour, with average slopes of 56 mV decade-1, with sampling rates of 60 samples h-1. The method was applied to analyze several kinds of bread, namely pão de trigo, pão integral, pão de centeio, pão de mistura, broa de milho, pão sem sal, pão meio sal, pão-de-leite, and pão de água. The accuracy and precision of the potentiometric method were ascertained by comparison to a spectrophotometric method of continuous segmented flow. These methods were validated against ion-chromatography procedures.

Cross-cultural validity of the demand-control questionnaire: Swedish and Brazilian workers

OBJECTIVE To evaluate the cross-cultural validity of the Demand-Control Questionnaire, comparing the original Swedish questionnaire with the Brazilian version. METHODS We compared data from 362 Swedish and 399 Brazilian health workers. Confirmatory and exploratory factor analyses were performed to test structural validity, using the robust weighted least squares mean and variance-adjusted (WLSMV) estimator. Construct validity, using hypotheses testing, was evaluated through the inspection of the mean score distribution of the scale dimensions according to sociodemographic and social support at work variables. RESULTS The confirmatory and exploratory factor analyses supported the instrument in three dimensions (for Swedish and Brazilians): psychological demands, skill discretion and decision authority. The best-fit model was achieved by including an error correlation between work fast and work intensely (psychological demands) and removing the item repetitive work (skill discretion). Hypotheses testing showed that workers with university degree had higher scores on skill discretion and decision authority and those with high levels of Social Support at Work had lower scores on psychological demands and higher scores on decision authority. CONCLUSIONS The results supported the equivalent dimensional structures across the two culturally different work contexts. Skill discretion and decision authority formed two distinct dimensions and the item repetitive work should be removed.

Ill-defined causes of death in Brazil: a redistribution method based on the investigation of such causes

OBJECTIVE To propose a method of redistributing ill-defined causes of death (IDCD) based on the investigation of such causes.METHODS In 2010, an evaluation of the results of investigating the causes of death classified as IDCD in accordance with chapter 18 of the International Classification of Diseases (ICD-10) by the Mortality Information System was performed. The redistribution coefficients were calculated according to the proportional distribution of ill-defined causes reclassified after investigation in any chapter of the ICD-10, except for chapter 18, and used to redistribute the ill-defined causes not investigated and remaining by sex and age. The IDCD redistribution coefficient was compared with two usual methods of redistribution: a) Total redistribution coefficient, based on the proportional distribution of all the defined causes originally notified and b) Non-external redistribution coefficient, similar to the previous, but excluding external causes.RESULTS Of the 97,314 deaths by ill-defined causes reported in 2010, 30.3% were investigated, and 65.5% of those were reclassified as defined causes after the investigation. Endocrine diseases, mental disorders, and maternal causes had a higher representation among the reclassified ill-defined causes, contrary to infectious diseases, neoplasms, and genitourinary diseases, with higher proportions among the defined causes reported. External causes represented 9.3% of the ill-defined causes reclassified. The correction of mortality rates by the total redistribution coefficient and non-external redistribution coefficient increased the magnitude of the rates by a relatively similar factor for most causes, contrary to the IDCD redistribution coefficient that corrected the different causes of death with differentiated weights.CONCLUSIONS The proportional distribution of causes among the ill-defined causes reclassified after investigation was not similar to the original distribution of defined causes. Therefore, the redistribution of the remaining ill-defined causes based on the investigation allows for more appropriate estimates of the mortality risk due to specific causes.

PLSR Models for Mechanical Strengths of Concrete Composite Materials Reinforced with Pultrusion Wastes

In this paper, we present two Partial Least Squares Regression (PLSR) models for compressive and flexural strength responses of a concrete composite material reinforced with pultrusion wastes. The main objective is to characterize this cost-effective waste management solution for glass fiber reinforced polymer (GFRP) pultrusion wastes and end-of-life products that will lead, thereby, to a more sustainable composite materials industry. The experiments took into account formulations with the incorporation of three different weight contents of GFRP waste materials into polyester based mortars, as sand aggregate and filler replacements, two waste particle size grades and the incorporation of silane adhesion promoter into the polyester resin matrix in order to improve binder aggregates interfaces. The regression models were achieved for these data and two latent variables were identified as suitable, with a 95% confidence level. This technological option, for improving the quality of GFRP filled polymer mortars, is viable thus opening a door to selective recycling of GFRP waste and its use in the production of concrete-polymer based products. However, further and complementary studies will be necessary to confirm the technical and economic viability of the process.