Measurement of the inclusive jet cross section in pp̄ collisions at s=1.96TeV

We report on a measurement of the inclusive jet cross section in pp̄ collisions at a center-of-mass energy s=1.96TeV using data collected by the D0 experiment at the Fermilab Tevatron Collider corresponding to an integrated luminosity of 0.70fb-1. The data cover jet transverse momenta from 50 to 600 GeV and jet rapidities in the range -2.4 to 2.4. Detailed studies of correlations between systematic uncertainties in transverse momentum and rapidity are presented, and the cross section measurements are found to be in good agreement with next-to-leading order QCD calculations. © 2008 The American Physical Society.

Virtual simulator for mobile robots navigation systems

This paper presents the virtual environment implementation for project simulation and conception of supervision and control systems for mobile robots, that are capable to operate and adapting in different environments and conditions. This virtual system has as purpose to facilitate the development of embedded architecture systems, emphasizing the implementation of tools that allow the simulation of the kinematic conditions, dynamic and control, with real time monitoring of all important system points. For this, an open control architecture is proposal, integrating the two main techniques of robotic control implementation in the hardware level: systems microprocessors and reconfigurable hardware devices. The implemented simulator system is composed of a trajectory generating module, a kinematic and dynamic simulator module and of a analysis module of results and errors. All the kinematic and dynamic results shown during the simulation can be evaluated and visualized in graphs and tables formats, in the results analysis module, allowing an improvement in the system, minimizing the errors with the necessary adjustments optimization. For controller implementation in the embedded system, it uses the rapid prototyping, that is the technology that allows, in set with the virtual simulation environment, the development of a controller project for mobile robots. The validation and tests had been accomplish with nonholonomics mobile robots models with diferencial transmission. © 2008 IEEE.

Search for neutral higgs bosons in Multi-b-Jet events in pp̄ collisions at s=1.96TeV

Data recorded by the D0 experiment at the Fermilab Tevatron Collider are analyzed to search for neutral Higgs bosons produced in association with b quarks. This production mode can be enhanced in the minimal supersymmetric standard model (MSSM). The search is performed in the three b quark channel using multijet triggered events corresponding to an integrated luminosity of 1fb-1. No statistically significant excess of events with respect to the predicted background is observed and limits are set in the MSSM parameter space. © 2008 The American Physical Society.

Infliximabe no tratamento inicial da retocolite ulcerativa moderada e grave. Terapia top down: Relato preliminar

The first option for the treatment of UC is both: salicylates or corticoids. Recently, in late November of 2006, the Brazilian Ministry of Health has approved infliximab (Remicade c, Mantecorp, Brazil) to treat ulcerative colitis. We report the use of infliximab as a first option for the treatment of two patients with severe ulcerative colitis. Case report: Patient 1: AZF, 52 years-old, female, was first diagnosed with UC after history and clinical examination; colonoscopy showed pancolitis with positive biopsy (crypt microabscess). Her Mayo score was 10 (range: 0 to 12/asymptomatic to severe colitis). She received intra venous infusion of infliximab at a dose of 5mg/Kg of body weigh at week 0, 2, 6 and 14. Then, patient was given mesalazine 4.5 g/day for maintenance therapy. Clinical response was defined as a decreased from baseline in the total Mayo score of at least 3 points. At present, patient is asymptomatic with Mayo score of 3 one moth after the last dose of infliximab. Patient 2: MLA, 45 years-old, female was first diagnosed with bloody diarrhea; colonoscopy showed left colitis and the biopsy was positive for ulcerative colitis. Her Mayo score was 9. She was offered and accepted the step down treatment. She was given infliximab 5mg/Kg of body weight at week 0, 2, 6 and 14. After initial treatment with infliximab, she received mesalazine 4.2 g/day. At present, she is asymptomatic with Mayo score of 2 eighteen days after the last dose of infliximab. At our knowledge, this is the first Brazilian report of the use of infliximab as fist-line therapy in ulcerative colitis. Few days after the begging of the infusion, an impressive clinical and colonoscopy improvement was seen in these two patients. Recently, it has been reported the use of infliximab as first-line therapy in pediatric Crohn disease. Infliximab could be a good option in cases of moderate and severe UC to avoid the side effects of the use of high doses of corticoids in patients with moderate and severe UC. However, the question if step-down therapy in ulcerative colitis is better then conventional therapy with salicylates and corticoids needs to be answered by randomized trials.

Las industrias de base forestal en América Latina: organización industrial y perspectivas

Incluye Bibliografía

El complejo forestal en Brasil

Incluye Bibliografía

Los complejos forestales en América Latina: evolución y políticas públicas orientadas a su consolidación

Incluye Bibliografía

Fatigue behaviour study on repaired aramid fiber/epoxy composites

Aramid fiber reinforced polymer composites have been used in a wide variety of applications, such as aerospace, marine, sporting equipment and in the defense sector, due to their outstanding properties at low density. The most widely adopted procedure to investigate the repair of composites has been by repairing damages simulated in composite specimens. This work presents the structural repair influence on tensile and fatigue properties of a typical aramid fiber/epoxy composite used in the aerospace industry. According to this work, the aramid/epoxy composites with and without repair present tensile strength values of 618 and 680MPa, respectively, and tensile modulus of 26.5 and 30.1 GPa, respectively. Therefore, the fatigue results show that in loads higher than 170 MPa, both composites present a low life cycle (lower than 200,000 cycles) and the repaired aramid/epoxy composite presented low fatigue resistance in low and high cycle when compared with non-repaired composite. With these results, it is possible to observe a decrease of the measured mechanical properties of the repaired composites.

Thelytokous parthenogenesis in the fungus-gardening ant Mycocepurus smithii (Hymenoptera: Formicidae)

The general prevalence of sexual reproduction over asexual reproduction among organisms testifies to the evolutionary benefits of recombination, such as accelerated adaptation to changing environments and elimination of deleterious mutations. Documented instances of asexual reproduction in groups otherwise dominated by sexual reproduction challenge evolutionary biologists to understand the special circumstances that might confer an advantage to asexual reproductive strategies. Here we report one such instance of asexual reproduction in the ants. We present evidence for obligate thelytoky in the asexual fungus-gardening ant, Mycocepurus smithii, in which queens produce female offspring from unfertilized eggs, workers are sterile, and males appear to be completely absent. Obligate thelytoky is implicated by reproductive physiology of queens, lack of males, absence of mating behavior, and natural history observations. An obligate thelytoky hypothesis is further supported by the absence of evidence indicating sexual reproduction or genetic recombination across the species' extensive distribution range (Mexico-Argentina). Potential conflicting evidence for sexual reproduction in this species derives from three Mycocepurus males reported in the literature, previously regarded as possible males of M. smithii. However, we show here that these specimens represent males of the congeneric species M. obsoletus, and not males of M. smithii. Mycocepurus smithii is unique among ants and among eusocial Hymenoptera, in that males seem to be completely absent and only queens (and not workers) produce diploid offspring via thelytoky. Because colonies consisting only of females can be propagated consecutively in the laboratory, M. smithii could be an adequate study organism a) to test hypotheses of the population-genetic advantages and disadvantages of asexual reproduction in a social organism and b) inform kin conflict theory. For a Portuguese translation of the abstract, please see Abstract S1. © 2009 Rabeling et al.

Dermatúnel: Modelo de ambiente interativo de aprendizagem em dermatologia

The Interactive Learning Environment (ILE) is an educational model that integrates features of 3D computer graphics and contextualization, in order to transmit a quantum of knowledge (islands of knowledge), in a precise and agile way, to people who do not know the subject. It is a model that uses multimedia resources supported by a contextualized environment to motivate the participants in the retention of knowledge. In this first release, eight relevant subjects in dermatology were addressed and implemented in the 62nd Brazilian Congress of Dermatology. The model was called Dermatúnel. In a period of four days, 3295 people visited it. The results showed that the participants were highly satisfied. The model has a great potential as an educational tool for medical training and guidance to the general public with the purpose of disease prevention.

Influence of medium composition in the production of ethanol by Zymomonas mobilis

The production of ethanol using Zymomonas mobilis had been reported to be three to four times larger than with Saccharomyces cereviseae. The influence of pH, temperature and composition of the means of fermentation are parameters that can direct the metabolism for the production of ethanol. The objective of this study was to evaluate the production of ethanol by Zymomonas mobilis CCT 4494, by variations of the initial pH, temperature and concentrations KCl, K 2SO4, MgSO4, CaCl2 and sucrose, by a factorial experimental design of type 27-2, according to the model proposed by Box et al. (1978). For this, the broth of sugar cane was used as sole carbon source, because it is cheap and easily accessible in the region of São José do Rio Preto, São Paulo State. According to the experimental design, the bacteria Zymomonas mobilis CCT 4494 has adapted in the fermentation mean containing high concentrations of sucrose, and supported the change of pH and temperature of fermentation. The highest amount of ethanol produced was 8.89 mg mL-1. This is not similar to the levels of secondary metabolites produced by Zymomonas mobilis CCT 4494.

Digital radiography for the inspection of weld seams of pipelines - better sensitivity

Conventional radiography, using industrial radiographic films, has its days numbered. Digital radiography, recently, has taken its place in various segments of products and services, such as medicine, aerospace, security, automotive, etc. As well as the technological trend, the digital technique has brought proven benefits in terms of productivity, sensitivity, the environment, tools for image treatment, cost reductions, etc. If the weld to be inspected is on a serried product, such as, for example, a pipe, the best option for the use of digital radiography is the plane detector, since its use can reduce the length of the inspection cycle due to its high degree of automation. This work tested welded joints produced with the submerged arc process, which were specially prepared in such a way that it shows small artificial cracks, which served as the basis forcomparing the sensitivity levels of the techniques involved. After carrying out the various experiments, the digital meth odshowed the highest sensitivity for the image quality indicator (IQI) of the wire and also in terms of detecting small discontinuities, indicating that the use of digital radiography using the plane detector had advantages over the conventional technique (Moreira et al. Digital radiography, the use of plane detectors for the inspection of welds in oil pipes and gas pipes.9th COTEQ and XXV National Testing Congress for Non Destructive Testing and Inspection; Salvador, Bahia, Brazil and Bavendiek et al. New digital radiography procedure exceeds film sensitivity considerably in aerospace applications. ECNDT; 2006; Berlin). The works were carried out on the basis of the specifications for oil and gas pipelines, API 5L 2004 edition (American Petroleum Institute. API 5L: specification for line pipe. 4th ed. p. 155; 2004) and ISO 3183 2007 edition (International Organization for Standardization, ISO 3183. Petroleum and gas industries - steel pipes for pi pelines transportation systems. p. 143; 2007). © 2010 Taylor & Francis.

Avaliação clínica e parasitológica de cães naturalmente infectados por Leishmania (Leishmania) chagasi submetidos a tratamento com antimoniato de meglumina e alopurinol

Aiming to assess the efficacy of the treatment, to verify the occurrence of possible disease relapses and to search for the presence of parasites after the treatment, seven dogs naturally infected by Leishmania sp., were submitted to a treatment with meglumine antimoniate and allopurinol. For this, lymph node and bone marrow aspiration biopsies were carried out at seven moments. After the end of the six-month observation period all dogs were submitted to euthanasia. Then, spleen and liver imprints and in vitro cultures were carried out to search for amastigote forms of the parasite. All animals presented remission of the symptoms and during all the observation period no dog presented relapse of the disease, although amastigote forms of the parasite were observed in two of the animals at the end of the experiment. Thus, it was possible to conclude that the treatment promotes clinical healing but it does not eliminate the parasites completely.

Effect of toothbrushing with different manual toothbrushes on the shear bond strength of orthodontic brackets

The aim of this study was to evaluate the effect of brushing with a Colgate 360° or Oral B Indicator 35 toothbrush on the shear bond strength of orthodontic brackets bonded to extracted human teeth. The bristle wear and bristle tip morphology were also examined after simulated tooth-brushing. Orthodontic brackets (Roth-P/1 st and 2 nd pre-molar S/D- Slot 0.18) were bonded (Transbond XT ®) to the smoothest surface of each of 45 extracted human molar and premolar teeth. Test specimens were randomly divided into three groups: Group 1, control group with no brushing; Group 2, brushing with the Oral B Indicator 35; Group 3, brushing with the Colgate 360°. Samples were adapted to a machine that simulated tooth-brushing. The bond strength of each bracket to each tooth was assessed with a mechanical testing machine. The bristle wear and bristle tip morphology indices were also assessed. Statistically significant differences were defined for p ≤ 0.05. The average bond strengths (range: 90.18-90.89 kgf/cm 2) did not differ among the three groups. The Colgate 360° showed less bristle wear and a better bristle tip morphology than the Oral B Indicator 35 toothbrush. However, use of either toothbrush did not decrease the bond strength of the orthodontic brackets. Therefore, patients undergoing orthodontic therapy can safely use either toothbrush.