Photoelastic determination of mode i stress intensity factor in tensile strips—effect of crack length

This paper reports an experimental investigation carried out, using the photoelastic technique, to determine the Mode I stress intensity factor in case of cracks of varying a/w ratio in single edge-notch specimens. The photoelastic information was analysed using the several methods proposed by earlier workers. The experimental results are compared with the analytical expressions.

Design and evaluation of a dual-microcomputer shared memory system with a shared I/O bus

The design, implementation and evaluation are described of a dual-microcomputer system based on the concept of shared memory. Shared memory is useful for passing large blocks of data and it also provides a means to hold and work with shared data. In addition to the shared memory, a separate bus between the I/O ports of the microcomputers is provided. This bus is utilized for interprocessor synchronization. Software routines helpful in applying the dual-microcomputer system to realistic problems are presented. Performance evaluation of the system is carried out using benchmarks.

Ernst Mathias Military; World War I; Portraits

Feldpost to wife Emmy Mathias; April 24, 1916

Ernst Mathias with military doctors, nurses and patients Military; World War I; Portraits; Groups

Feldpost to wife Emmy Mathias; September 19, 1918

Should I grow wildflowers? Agrilink, your growing guide to better farming

Each Agrilink kit has been designed to be both comprehensive and practical. As the kits are arranged to answer questions of increasing complexity, they are useful references for both new and experienced producers of specific crops. Agrilink integrates the technology of horticultural production with the management of horticultural enterprises. REPRINT INFORMATION - PLEASE READ! For updated information please call 13 25 23 or visit the website www.deedi.qld.gov.au (Select: Queensland Industries – Agriculture link) This publication has been reprinted as a digital book without any changes to the content published in 2000. We advise readers to take particular note of the areas most likely to be out-of-date and so requiring further research: see detailed information on first page of the kit. Even with these limitations we believe this information kit provides important and valuable information for intending and existing growers. This publication was last revised in 2000. The information is not current and the accuracy of the information cannot be guaranteed by the State of Queensland. This information has been made available to assist users to identify issues involved in the production of wildflowers. This information is not to be used or relied upon by users for any purpose which may expose the user or any other person to loss or damage. Users should conduct their own inquiries and rely on their own independent professional advice. While every care has been taken in preparing this publication, the State of Queensland accepts no responsibility for decisions or actions taken as a result of any data, information, statement or advice, expressed or implied, contained in this publication.

Walter Gottschalk and Fritz Gottschalk (Papa) saying goodbye to Elizabeth and Hans Krakauer who are on board the ship Koenigstein leaving to emigrate to America; Antwerp, Belgium.

Digital Image

Crystallization behaviour of polyethylene and i-polybutene-1 blends

The mutual influence of the components on the crystallization behaviour of polyblends, namely, isotactic polybutene-1 (PB) with low-density and high-density polyethylene (LDPE and HDPE), has been studied using techniques such as differential scanning calorimetry, infra-red spectroscopy, wide-angle X-ray diffraction, scanning electron microscopy, etc. Each component in the blend is observed to crystallize independently. There is phase separation and incompatibility, as shown from tensile properties and scanning electron microscopic observation of the fracture surface of the blend. For HDPE-PE blends (<30% HDPE), unusual form I′ crystals of PB are observed along with the usual form II.

Portrait of Leopold Meyerhof in his World War I officer's uniform Military; World War I; Portraits

Digital Image

View of Paul I. Landmann manufacturing factory; Mannheim-Neckarau Business Establishments; Factories

"Fabrikansicht"

Printing room 1; Paul I. Landmann Manufacturing Factory; Mannheim-Neckarau Business Establishments; Factories

"Drucksaal 1"

Printing room; Paul I. Landmann Manufacturing Factory; Mannheim-Neckarau Business Establishments; Factories

"Umdruckerei"

Stamping room; Paul I. Landmann manufacturing factory; Mannheim-Neckarau Business Establishments; Factories

"Pragesaal"

Studio and office; Paul I. Landmann manufacturing factory; Mannheim-Neckarau Business Establishments; Factories

"Atelier und Buero"

Paul I. Landmann manufacturing factory; Mannheim-Neckarau Business Establishments; Factories

"Fabrikansicht von der Toreinfahrt"

Factory employee housing; Paul I. Landmann Manufacturing Factory; Mannheim-Neckarau Business Establishments; Factories

"Arbeiter und Mietshaeuser"