Amygdala activation in response to 2D and 3D emotion-inducing stimuli

Studying changes in brain activation according to the valence of emotion-inducing stimuli is essential in the research on emotions. Due to the ecological potential of virtual reality, it is also important to examine whether brain activation in response to emotional stimuli can be modulated by the three-dimensional (3D) properties of the images. This study uses functional Magnetic Resonance Imaging to compare differences between 3D and standard (2D) visual stimuli in the activation of emotion-related brain areas. The stimuli were organized in three virtual-reality scenarios, each with a different emotional valence (pleasant, unpleasant and neutral). The scenarios were presented in a pseudo-randomized order in the two visualization modes to twelve healthy males. Data were analyzed through a GLM-based fixed effects procedure. Unpleasant and neutral stimuli activated the right amygdala more strongly when presented in 3D than in 2D. These results suggest that 3D stimuli, when used as “building blocks” for virtual environments, can induce increased emotional loading, as shown here through neuroimaging.

Fisioterapia e reabilitação em Portugal : o financiamento como factor crítico do desempenho

RESUMO - Num contexto em que a prestação de cuidados de Fisioterapia e Reabilitação é identificada como apresentando uma desigualdade e desajustamento da oferta regional superior à dos restantes cuidados de saúde, assim como uma falta de adequação dos preços praticados, perante as condições de oferta e procura actualmente existentes, o presente trabalho tem por objectivo investigar, no domínio do Desempenho, a influência do Financiamento na definição da prestação destes cuidados, tendo como pressuposto genérico que as decisões estratégicas e a reestruturação produtiva das organizações de saúde são condicionadas pelo sistema de preços. Considera-se que o actual sistema de Financiamento/Pagamento provoca um constrangimento na qualidade da resposta destes cuidados a dois níveis: um primeiro nível, ao colocar o pagamento no âmbito dos Meios Complementares de Diagnóstico e Terapêutica (MCDTs) a contratar pelo Serviço Nacional de Saúde, com isso determinando a configuração organizativa do sistema; um segundo nível de constrangimento que incide sobre as estruturas das organizações prestadoras, pela modelação que induz, nomeadamente a nível da sua produção. Na impossibilidade de tratar as duas dimensões do problema, pela falta de indicadores de desempenho deste sector, analisou-se, relativamente ao segundo nível de constrangimento, a produção de fisioterapia de três organizações que, potencialmente, teriam o mesmo o mesmo perfil de oferta por se enquadrarem num mesmo perfil de procura. Os resultados reflectem o pressuposto genérico do trabalho e abrem espaço para colocar como futura hipótese de investigação a razão da(s) causa(s) que poderão estar subjacentes à discrepância encontrada na média de tratamentos por sessão (duas vezes e meia) na produção das duas organizações que foi possível comparar.------------------- ABSTRACT - In a context where the provision of Physical Therapy and Rehabilitation care is identified as having a regional mismatch of supply and inequality above all the others health cares, and a lack of adequacy of prices in the current conditions of supply and demand, the present work has, as main purpose, to investigate, in the field of Performance, the Payment’s influence in shaping the provision of such health care. The general assumption tracking this analysis is that the strategic decisions on productive structure of health care organizations are influenced by the price systems. It is considered that the current Finance / Payment system causes two levels of constraints on the quality of such health care: a first constraint, as it putts its payment under the Supplementary Means of Diagnosis and Therapy (MCDTs), witch ends up establishing the organizational setup of the system; a second level of constraint by modelling the internal structure of these organizations. The lack of indicators characterizing the performance of this sector, addressed the present study to the second dimension, in witch was analysed the physical therapy production in three organizations that, potentially, would have the same profile of supply responding to similar characteristics of demand. The results reflect the above mentioned general assumption that supported the work, and leave an open space for future research, about the reason (s) that lay behind the discrepancy found between the average of treatments per session (two and a half times) in

Reflexões metodológicas a partir do espetáculo "Além as estrelas são a nossa casa" de Abel Neves : trabalho de projecto

Trabalho de Projecto submetida(o) à Escola Superior de Teatro e Cinema para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Teatro - especialização em Artes Performativas - Interpretação

Self-scheduling and bidding strategies of thermal units with stochastic emission constraints

This paper is on the self-scheduling problem for a thermal power producer taking part in a pool-based electricity market as a price-taker, having bilateral contracts and emission-constrained. An approach based on stochastic mixed-integer linear programming approach is proposed for solving the self-scheduling problem. Uncertainty regarding electricity price is considered through a set of scenarios computed by simulation and scenario-reduction. Thermal units are modelled by variable costs, start-up costs and technical operating constraints, such as: forbidden operating zones, ramp up/down limits and minimum up/down time limits. A requirement on emission allowances to mitigate carbon footprint is modelled by a stochastic constraint. Supply functions for different emission allowance levels are accessed in order to establish the optimal bidding strategy. A case study is presented to illustrate the usefulness and the proficiency of the proposed approach in supporting biding strategies. (C) 2014 Elsevier Ltd. All rights reserved.

alpha-Co(OH)(2)/carbon nanofoam composite as electrochemical capacitor electrode operating at 2 V in aqueous medium

In this work, alpha-Co(OH)(2) is electrodeposited onto carbon nanofoam forming a composite electrode operating in a potential window of 2 V in aqueous medium. Prior to electrodeposition, the carbon nanofoam substrate is subjected to a functionalization process, which leads to an increase of about 40% in its specific capacitance value. Formation of cobalt hydroxide clusters onto the functionalized carbon nanofoam by pulse electrodeposition further enhances the specific capacitance of the electrode. The combination of these factors with an enlarged working potential window, results in a material with specific capacitance close to 300 F g(-1) at current density of 1 A g(-1), considering the total mass loading of the composite. This suggests the potential application of the prepared composites in high energy density electrochemical supercapacitors. (c) 2015 Elsevier B.V. All rights reserved.

Choosing amine-based absorbents for CO2 capture

CO2 capture from gaseous effluents is one of the great challenges faced by chemical and environmental engineers, as the increase in CO2 levels in the Earth atmosphere might be responsible for dramatic climate changes. From the existing capture technologies, the only proven and mature technology is chemical absorption using aqueous amine solutions. However, bearing in mind that this process is somewhat expensive, it is important to choose the most efficient and, at the same time, the least expensive solvents. For this purpose, a pilot test facility was assembled and includes an absorption column, as well as a stripping column, a heat exchanger between the two columns, a reboiler for the stripping column, pumping systems, surge tanks and all necessary instrumentation and control systems. Some different aquous amine solutions were tested on this facility and it was found that, from a set of six tested amines, diethanol amine is the one that turned out to be the most economical choice, as it showed a higher CO2 loading capacity (0.982 mol of CO2 per mol of amine) and the lowest price per litre (25.70 ¤/L), even when compared with monoethanolamine, the benchmark solvent, exhibiting a price per litre of 30.50 ¤/L.

The use of the boundary element method in the analysis of single lap joints

The most common techniques for stress analysis/strength prediction of adhesive joints involve analytical or numerical methods such as the Finite Element Method (FEM). However, the Boundary Element Method (BEM) is an alternative numerical technique that has been successfully applied for the solution of a wide variety of engineering problems. This work evaluates the applicability of the boundary elem ent code BEASY as a design tool to analyze adhesive joints. The linearity of peak shear and peel stresses with the applied displacement is studied and compared between BEASY and the analytical model of Frostig et al., considering a bonded single-lap joint under tensile loading. The BEM results are also compared with FEM in terms of stress distributions. To evaluate the mesh convergence of BEASY, the influence of the mesh refinement on peak shear and peel stress distributions is assessed. Joint stress predictions are carried out numerically in BEASY and ABAQUS®, and analytically by the models of Volkersen, Goland, and Reissner and Frostig et al. The failure loads for each model are compared with experimental results. The preparation, processing, and mesh creation times are compared for all models. BEASY results presented a good agreement with the conventional methods.

Two-loop stability of a complex singlet extended Standard Model

Motivated by the dark matter and the baryon asymmetry problems, we analyze a complex singlet extension of the Standard Model with a Z(2) symmetry (which provides a dark matter candidate). After a detailed two-loop calculation of the renormalization group equations for the new scalar sector, we study the radiative stability of the model up to a high energy scale (with the constraint that the 126 GeV Higgs boson found at the LHC is in the spectrum) and find it requires the existence of a new scalar state mixing with the Higgs with a mass larger than 140 GeV. This bound is not very sensitive to the cutoff scale as long as the latter is larger than 10(10) GeV. We then include all experimental and observational constraints/measurements from collider data, from dark matter direct detection experiments, and from the Planck satellite and in addition force stability at least up to the grand unified theory scale, to find that the lower bound is raised to about 170 GeV, while the dark matter particle must be heavier than about 50 GeV.

In Situ Near-Infrared (NIR) Versus High-Throughput Mid- Infrared (MIR) Spectroscopy to Monitor Biopharmaceutical Production

The development of biopharmaceutical manufacturing processes presents critical constraints, with the major constraint being that living cells synthesize these molecules, presenting inherent behavior variability due to their high sensitivity to small fluctuations in the cultivation environment. To speed up the development process and to control this critical manufacturing step, it is relevant to develop high-throughput and in situ monitoring techniques, respectively. Here, high-throughput mid-infrared (MIR) spectral analysis of dehydrated cell pellets and in situ near-infrared (NIR) spectral analysis of the whole culture broth were compared to monitor plasmid production in recombinant Escherichia coil cultures. Good partial least squares (PLS) regression models were built, either based on MIR or NIR spectral data, yielding high coefficients of determination (R-2) and low predictive errors (root mean square error, or RMSE) to estimate host cell growth, plasmid production, carbon source consumption (glucose and glycerol), and by-product acetate production and consumption. The predictive errors for biomass, plasmid, glucose, glycerol, and acetate based on MIR data were 0.7 g/L, 9 mg/L, 0.3 g/L, 0.4 g/L, and 0.4 g/L, respectively, whereas for NIR data the predictive errors obtained were 0.4 g/L, 8 mg/L, 0.3 g/L, 0.2 g/L, and 0.4 g/L, respectively. The models obtained are robust as they are valid for cultivations conducted with different media compositions and with different cultivation strategies (batch and fed-batch). Besides being conducted in situ with a sterilized fiber optic probe, NIR spectroscopy allows building PLS models for estimating plasmid, glucose, and acetate that are as accurate as those obtained from the high-throughput MIR setup, and better models for estimating biomass and glycerol, yielding a decrease in 57 and 50% of the RMSE, respectively, compared to the MIR setup. However, MIR spectroscopy could be a valid alternative in the case of optimization protocols, due to possible space constraints or high costs associated with the use of multi-fiber optic probes for multi-bioreactors. In this case, MIR could be conducted in a high-throughput manner, analyzing hundreds of culture samples in a rapid and automatic mode.

GPU implementation of the simplex identification via split augmented Lagrangian

Hyperspectral imaging can be used for object detection and for discriminating between different objects based on their spectral characteristics. One of the main problems of hyperspectral data analysis is the presence of mixed pixels, due to the low spatial resolution of such images. This means that several spectrally pure signatures (endmembers) are combined into the same mixed pixel. Linear spectral unmixing follows an unsupervised approach which aims at inferring pure spectral signatures and their material fractions at each pixel of the scene. The huge data volumes acquired by such sensors put stringent requirements on processing and unmixing methods. This paper proposes an efficient implementation of a unsupervised linear unmixing method on GPUs using CUDA. The method finds the smallest simplex by solving a sequence of nonsmooth convex subproblems using variable splitting to obtain a constraint formulation, and then applying an augmented Lagrangian technique. The parallel implementation of SISAL presented in this work exploits the GPU architecture at low level, using shared memory and coalesced accesses to memory. The results herein presented indicate that the GPU implementation can significantly accelerate the method's execution over big datasets while maintaining the methods accuracy.

On the requirements of interpolating polynomials for path motion constraints

In the framework of multibody dynamics, the path motion constraint enforces that a body follows a predefined curve being its rotations with respect to the curve moving frame also prescribed. The kinematic constraint formulation requires the evaluation of the fourth derivative of the curve with respect to its arc length. Regardless of the fact that higher order polynomials lead to unwanted curve oscillations, at least a fifth order polynomials is required to formulate this constraint. From the point of view of geometric control lower order polynomials are preferred. This work shows that for multibody dynamic formulations with dependent coordinates the use of cubic polynomials is possible, being the dynamic response similar to that obtained with higher order polynomials. The stabilization of the equations of motion, always required to control the constraint violations during long analysis periods due to the inherent numerical errors of the integration process, is enough to correct the error introduced by using a lower order polynomial interpolation and thus forfeiting the analytical requirement for higher order polynomials.

Estruturas de Suporte de Terras Executadas com Pneus - Modelo à Escala Reduzida

Mestrado em Engenharia Civil – Ramo de Estruturas

Multiple sequence alignment correction using constraints

Trabalho apresentado no âmbito do European Master in Computational Logics, como requisito parcial para obtenção do grau de Mestre em Computational Logics

Identificação, avaliação e controlo de riscos numa empresa da indústria dos colchões

Relatório de Estágio

Transporte marítimo de curta distância na União Europeia e em Portugal

O transporte marítimo sempre assumiu uma importância primordial no transporte, quer de pessoas como de mercadorias. O uso das vias marítimas para o transporte de mercadorias é uma prática utilizada desde os tempos antigos. O transporte marítimo na Europa sempre foi uma forma eficaz e de baixo custo de transportar passageiros e mercadorias de um local para outro. Atualmente, todos os modos de transporte necessitam de melhorar a sua eficiência e reduzir o montante de poluentes que libertam para o meio-ambiente. O transporte marítimo de curta distância (TMCD) é parte essencial no sistema de transporte multimodal Europeu representando cerca de 37% das transações intracomunitárias (tkm). Os resultados alcançados advêm desde que, em 2001, a European Shortsea Network (ESN) em parceria com os Shortsea Promotion Centres (SPC) de cada Estado-Membro da União Europeia (EU) conseguiram efetuar progressos significativos na promoção e desenvolvimento do transporte por esta via. Esta tese de mestrado pretende caraterizar o TMCD na EU e em Portugal e a sua articulação com os outros meios de transporte de mercadorias. Será também analisada a situação Portuguesa ao nível do transporte marítimo de mercadorias fazendo especial relevância à mercadoria contentorizada, às infraestruturas atualmente existentes em Portugal assim como às perspetivas futuras para o setor. A metodologia utilizada inclui a revisão de literatura da investigação efetuada sobre o setor, a recolha de informação primária através do instrumento inquérito e a recolha de informação estatística a partir de fontes secundárias, permitindo a caraterização do setor. O inquérito foi desenvolvido e partilhado com mais de um milhar de empresas a operar em Portugal, nas que se incluem as empresas transportadoras, operadores logísticos, agentes de navegação e as principais empresas exportadoras/importadoras a operar em Portugal, tendo-se obtido 106 respostas válidas. A nível nacional, o inquérito realizado permitiu confirmar que os principais portos logísticos para a movimentação internacional de mercadorias são os portos de Leixões, Lisboa, Sines e Setúbal, estando a maioria das empresas inquiridas localizadas no hinterland destes portos. O inquérito permitiu também concluir que o facto de o transporte rodoviário ser um meio de transporte rápido, de baixo custo para curtas e médias distâncias, de elevada frequência de transporte, de oferecer elevada capacidade e diversos tipos de carga transportada, de oferecer serviços Porta-a-Porta, da elevada flexibilidade e mobilidade oferecida, assim como a rapidez das operações de carga e descarga continuam a contribuir para a elevada competitividade deste modo de transporte de mercadorias, sendo as razões pelo qual este modo é escolhido, pese embora, ser o modo mais poluente por tonelada transportada. Os modos de transporte TMCD e ferroviário apenas são alvo de escolha, como modo de transporte de mercadorias, por parte das empresas mais responsáveis socialmente e ambiental. O inquérito permitiu ainda concluir que, para haver uma melhor articulação entre o TMCD com outros meios de transporte, é necessário que sejam disponibilizados novos serviços, portos e terminais logísticos com serviços privatizados, assim como a redução das tarifas aplicáveis TMCD.