Evaluation of Fe uptake and translocation in transgenic and non-transgenic soybean plants using enriched stable Fe-57 as a tracer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Estudo de repelência com diversos produtos de origem natural em operárias de Apis mellifera em semi-campo

Accidents involving insects of the Hymenoptera order occur very often with both human beings and domestic pets and, in Brazil, they include aggravated cases with Africanized bees (Apis mellifera). The aggravation of deforestation and the lack of awareness regarding the subject are factors that contribute to the rise of the number of bees in the urban environment. This fact has been causing several derangements among the population because, once these insects are bothered, they become very aggressive. Considering the risks to population and the great amount of accidents that could be avoided, the development of researches with the goal of determining repelling substances is rather important. Therefore, this research evaluated the repelling action of essential natural oils obtained from rosemary (Rosmarinus oficinalis), lemongrass (Cymbopogon citratus), thyme (Thymus vulgaris), cedar (Juniperus virginiana), clove (Syzygium aromaticum) and mint (Mentha piperita) on A. mellifera Africanized worker bees in both semi-field and aggressiveness tests. Among the evaluated composites, the lemongrass, mint and clove essential natural oils presented a grater repelling effect, inhibiting the bees’ visitation to the managed feeders almost completely. The cedar essential natural oil was the least effective composite, and the rest of the tested oils presented satisfactory repellency, which became less effective over time, according to non-parametric Mann-Whitney test. However, further tests showed that only the lemongrass essential natural oil caused a less aggressive response from the bees, which can confirm the repelling power of this composite. This way, according to the results obtained through this research, lemongrass presents a greater potential to the development of effective repelling formulas against Africanized bees (Apis mellifera)

Estudo de temperatura de plasma de álcool através de espectroscopia de emissão natural radical C2*

Non-intrusive methods of diagnosis, such as spectral analysis of the radiation emitted by the system, have been used as a viable alternative for determining the temperature of combustion systems. Among them, the determination of temperature by natural emission spectroscopy has the advantage of requiring relatively simple experimental devices. Once Chemiluminescent species are formed directly in the excited state, the collection and recording of radiation emission spectrum is enough to determine the temperature (CARINHANA, 2008). In this study we used the process of making direct comparisons between the experimental spectra obtained in the laboratory from the plasma of alcohol, and the theoretical spectra plotted from a computer program developed at the IEAv. The objective was to establish a fast and reliable method to measure the rotational temperature of the radical C2*. The results showed that the temperature of the plasma, which in turn can be taken as the rotational temperature of the system, is proportional to the pressure. The temperature values ranged from ca. 2300 ~ 2500 K at a pressure of 19 mmHg to 3100 ~ 3500 K for the pressure of 46 mmHg. The temperature values are somewhat smaller when we consider the theoretical spectrum as a Lorentzian curve. The overlap of the spectra was better when using the profile curve, but still were not exactly superimposed. The solution to improve the overlap of the theoretical with the experimental spectra is the use of a curve that has the convolution of two profiles analyzed: Lorentzian and Gaussian. This curve is called the Voigt profile, which will also be implemented by programmers and studied in a next work

Análise teórica e experimental de uma ventaneira de alto forno, visando seu comportamento térmico e fluidodinâmico

In this work, it was studied the thermal and fluid dynamic behavior from theorical and experimental point of view of a blast furnace tuyere. The tuyere is responsible for the hot air insuflation into the blast furnace. The parameter used in the comparison was the difference between the cooling water inlet and outlet temperatures. There were used forced convection correlations inside circular sections with adequations for non circular sections. Based on operations dates of flux and thermal loads it was possible to model numerically the tuyere, and, since it was obtained the wall temperatures, estimate the conduction and convection resistances and the heat flux through the walls in contact with the water. The total heat fluxes from wall to water were applied to the energy conservation equation where could be estimated the theorical temperature variation. Compared to the real value, the theorical value presented a difference of 0,2 °C. Considering that the boundary conditions around the tuyere are transitories and that your channels have some rugosity irregularities we can consider the estimation method for cooling system coherent with the real operational parameters

Relação entre a disparidade de força entre membros inferiores e estabilidade postural em atletas de voleibol

Volleyball is a sport in which the laterality dominant limb shows superior strength and coordination because of its preferential use. Asymmetrical tendencies during the landing after the jump when striking or blocking actions are predominant for most part of game (ARRUDA; EDUARDO, 2008). Adaptations include imbalance of forces in static and dynamic motions at the knee joint, which increases risk for injury. Also, asymmetries in balance control during jumping and landing associate with a general postural instability that can be observed during static balance tasks. The purpose of this study was to investigate relationship between unequal lower limb strength (muscle imbalance) and postural stability levels in volleyball athletes and non-athletes. Nine female volleyball athletes and 10 active non-athletes participated in this study. Four encouters with participants were scheduled: three encounters in the bodybuilding gymnasium to collect anthropometric measures (weight, height for BMI, thigh circumference, which provided an initial diagnosis about asymmetry), and to perform the isometric strength test (i.e., leg press using a load cell and a force transducer to calculate uni an bilateral strength). The last encounter was in the laboratory where a balance test on a force platform was administered under five test conditions, with three repetitions each: baseline (natural standing position), one-leg standing, right side, with full vision (D_CV), and blindfolded (D_SV), one-leg standing, left side, with full vision (E_CV), and blindfolded (E_SV). The stability levels were evaluated using the path length parameters which was based on the total displacement of the center of pressure (DTCP). . Both groups shows asymmetric strength levels between legs, with better performance for the right leg. An ANOVA three way using the DTCP for the CV condition, legs (D x E), trials (3) with repeated measures for the first two factors and with a between (three)...

O assoalhamento em Bokermannohyla alvarengai (Anura, Hylidae): história natural e adaptações morfo-fisiológicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Natural compounds isolated from Brazilian plants are potent inhibitors of hepatitis C virus replication in vitro

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Peat humic substances enriched with nutrients for agricultural applications: competion between nutrients and non-essential metals present in tropical soils

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Ciprofloxacin Release Using Natural Rubber Latex Membranes as Carrier

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Antifungal activity of extracts and isolated compounds from Buchenavia tomentosa on Candida albicans and non-albicans

Aim: This study aimed to evaluate the antifungal activity of Buchenavia tomentosa extract and bioactive compounds on six Candida species. Materials & methods: The antimicrobial activity of extract was evaluated using standard strains and clinical isolates. Cytotoxicity was tested in order to evaluate cell damage caused by the extract. Extract was chemically characterized and the antifungal activity of its compounds was evaluated. Results: Extract showed antifungal activity on Candida species. Candida non-albicans were more susceptible than Candida albicans. Low cytotoxicity for extract was observed. The isolated compounds presented antifungal activity at least against one Candida spp. and all compounds presented antifungal effect on Candida glabrata. Conclusion: Extracts from Buchenavia tomentosa showed promising antifungal activity on Candida species with low cytotoxicity. Gallic acid, corilagin and ellagic acid showed promising inhibitory activity on Candida glabrata.

Early human handling in non-weaned piglets: Effects on behaviour and body weight

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Natural rubber/leather waste composite foam: A new eco-friendly material and recycling approach

This article describes a new approach of recycling the leather waste (shavings) using it as filler in natural rubber foams composites. The foams were prepared using different amounts of leather waste (0-60 parts per hundred of rubber) and submitted to morphological (SEM microscopy) and mechanical analyses (cyclic stress-strain compression). The increase of leather shavings on the composite causes an increase of viscosity in the mixture, which reflects in the foaming process. This results in smaller and fairly uniform cells. Furthermore, expanded rubber has the biggest cell size, with more than 70% of cell with 1000 mu m, while the composite with the higher concentration of leather has around 80% of total number of cells with 100-400 mu m. The mechanical parameters were found to depend on the leather dust concentration. Moreover, the stiffness rises with the increase of leather shavings; consequently, the compression force for expanded rubber was 0.126 MPa as well as the composite with higher concentration of leather was 7.55 MPa. (c) 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 41636.

Non-conventional cement-based composites reinforced with vegetable fibers: a review of strategies to improve durability

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Numerical and experimental investigation of a vibration system with non-ideal vibration source

An excitation force that is not influenced by the system's states is said to be an ideal energy source. In real situations, a direct and feedback coupling between the excitation source and the system must always exist. This manifestation of the law of conversation of energy is known as Sommerfeld Effect. In the case of obtaining a mathematical model for such system, additional equations are usually necessary to describe the vibration sources and their coupling with the mechanical system. In this work, a cantilever beam and a non-ideal electric DC motor that is fixed to the beam free end is analyzed. The motor has an unbalanced mass that provides excitation to the system proportional to the current applied to the motor. During the motor's coast up operation, as the excitation frequency gets closer to the beam first natural frequency and if the drive power increases further, the DC motor speed remains constant until it suddenly jumps to a much higher value (simultaneously the vibration amplitude jumps to a much lower value) upon exceeding a critical input power. It was found that the Sommerfeld effect depends on some system parameters and the motor operational procedures. These parameters are explored to avoid the resonance capture in Sommerfeld effect. Numerical simulations and experimental tests are used to help insight this dynamic behavior.

Non ohmic gigahertz conductivity in pressed pellets of ClO4 doped poly(3-methylthiophene)

ESR measurements In pressed pellets of doped Poly(3-Methylthiophene)(P3MT) were performed at 10 K and 50 K after cooling the system slowly from room temperature to 110 K, quenching to 77 K and then to 10 K. ESR line asymmetry (A/B) as a function of microwave power was observed and 9.4 GHz conductivity was obtained from Dyson's theory. The data is discussed in terms of Charge-Density Wave (CDW) depinning. At 50 K the threshold electric field is estimated to be less than 1 V/cm. At 10 K a subtle pinning of the CDW was observed around 15 mW.