Shift

Shift was an exhibition held in October 2008, and was the culmination of a 10 month artist in residence held at Metro Arts, Brisbane in 2008. A number of works were produced and exhibited, and were a response to the ambient urban landscape of inner city Brisbane. The research component contributes to the discussion of the form and display of digital animation, and builds upon strategies of presentation developed from series of works completed in 2005-2007 as part of an MA (research) at QUT, Brisbane. For the two week exhibition, one interactive kiosk and several large scale digital prints were produced, and also a site specific digital animation sequence was projected onto urban landscape features next to the gallery.

Wicked futures : metadesign, resilience and transformative classrooms

This paper presents an Australian case study entitled “Designing Futures”. It examines a six month multidisciplinary design program offered by a large co-educational, inner-city state school in Queensland in 2011. The program extended an already successful and innovative school-based design curriculum and involved students in Philosophy, Science, Mathematics and English classes, as well those in Art and Design. Additionally, there were 5 full-day workshops where students combined a wide range of skills to brainstorm, design and create sustainable solutions. The design thinking used in this program was based on the concepts of metadesign, design activism and design futuring. “Designing Futures” linked over 700 middle and secondary school students and staff with nine designers-in-residence from diverse disciplines, including bio-ethics. The program aimed to empower students from highly diverse cultural and social backgrounds to engage in authentic, participatory design processes, prepare them for future social and environmental challenges, and increase personal and community resilience. The research results will inform ongoing program development and research in K-12 design education, both within the school and in conjunction with university and community partnerships in Queensland.

Structural dissection of Ebola virus and its assembly determinants using cryo-electron tomography

Ebola virus is a highly pathogenic filovirus causing severe hemorrhagic fever with high mortality rates. It assembles heterogenous, filamentous, enveloped virus particles containing a negative-sense, single-stranded RNA genome packaged within a helical nucleocapsid (NC). We have used cryo-electron microscopy and tomography to visualize Ebola virus particles, as well as Ebola virus-like particles, in three dimensions in a near-native state. The NC within the virion forms a left-handed helix with an inner nucleoprotein layer decorated with protruding arms composed of VP24 and VP35. A comparison with the closely related Marburg virus shows that the N-terminal region of nucleoprotein defines the inner diameter of the Ebola virus NC, whereas the RNA genome defines its length. Binding of the nucleoprotein to RNA can assemble a loosely coiled NC-like structure; the loose coil can be condensed by binding of the viral matrix protein VP40 to the C terminus of the nucleoprotein, and rigidified by binding of VP24 and VP35 to alternate copies of the nucleoprotein. Four proteins (NP, VP24, VP35, and VP40) are necessary and sufficient to mediate assembly of an NC with structure, symmetry, variability, and flexibility indistinguishable from that in Ebola virus particles released from infected cells. Together these data provide a structural and architectural description of Ebola virus and define the roles of viral proteins in its structure and assembly

Intercalation of kaolins by alkaline earth metal salts

A suite of new materials, based on chemical modification of kaolins, has been successfully prepared via manipulation of the kaolin structure and subsequent intercalation by CaCl2 and MgCl2. A standard kaolinite(KGa-1)and a commercially available halloysite (New Zealand china clay) were used for this study. The kaolins are given several cycles of intercalation and deintercalation using a common intercalant such as potassium acetate. The number of cycles given depends on the type of kaolin. After this treatment, both kaolinite and halloysite hydrate show considerable broadening of the (00l) reflections which indicate extensive exfoliation of the layers. In the case of kaolinite, exfoliated layers roll to form tubes similar to proper halloysite. Kaolins modified by the above treatment readily intercalate MgCl2 and CaCl2 from saturated solutions of these salts. On intercalation with CaCl2 and MgCl2, kaolinite layers expand to 10A and 9.8A, and those of halloysite to 12.8A and 15.5A, respectively. To our knowledge, this is the first report of successful intercalation of alkaline-earth halides by kaolins.

Improving the moment capacities of hollow flange cold-formed Litesteel Beams using web stiffeners

The LiteSteel Beam (LSB) is a new hollow flange section developed in Australia with a unique geometry consisting of torsionally rigid rectangular hollow flanges and a relatively slender web. The LSB is subjected to a relatively new Lateral Distortional Buckling (LDB) mode when used as flexural members. Unlike the commonly observed lateral torsional buckling, lateral distortional buckling of LSBs is characterised by cross sectional change due to web distortion. Lateral distortional buckling causes significant moment capacity reduction for LSBs with intermediate spans. Therefore a detailed investigation was undertaken to determine the methods of reducing the effects of lateral distortional buckling in LSB flexural members. For this purpose the use of web stiffeners was investigated using finite element analyses of LSBs with different web stiffener spacing and sizes. It was found that the use of 5 mm steel plate stiffeners welded or screwed to the inner faces of the top and bottom flanges at third span points considerably reduced the lateral distortional buckling effects in LSBs. Suitable design rules were then developed to calculate the enhanced elastic lateral distortional buckling moments and the higher ultimate moment capacities of LSBs with the chosen web stiffener arrangement. This paper presents the details of this investigation and the results.

Games for change and transformative learning : an ethnographic case study

This thesis aims to contribute to a better understanding of how serious games/games for change function as learning frameworks for transformative learning in an educational setting. This study illustrates how the meaning-making processes and learning with and through computer gameplay are highly contingent, and are significantly influenced by the uncertainties of the situational context. The study focuses on SCAPE, a simulation game that addresses urban planning and sustainability. SCAPE is based on the real-world scenario of Kelvin Grove Urban Village, an inner city redevelopment area in Brisbane, Queensland, Australia. The game is embedded within an educational program, and I thus account for the various gameplay experiences of different school classes participating in this program. The networks emerging from the interactions between students/players, educators, facilitators, the technology, the researcher, as well as the setting, result in unanticipated, controversial, and sometimes unintended gameplay experiences and outcomes. To unpack play, transformative learning and games, this study adopts an ecological approach that considers the magic circle of gameplay in its wider context. Using Actor-Network Theory as the ontological lens for inquiry, the methods for investigation include an extensive literature review, ethnographic participant observation of SCAPE, as well as student and teacher questionnaires, finishing with interviews with the designers and facilitators of SCAPE. Altogether, these methods address my research aim to better understand how the heterogeneous actors engage in the relationships in and around gameplay, and illustrate how their conflicting understandings enable, shape or constrain the (transformative) learning experience. To disentangle these complexities, my focus continuously shifts between the following modes of inquiry into the aims „h To describe and analyse the game as a designed artefact. „h To examine the gameplay experiences of players/students and account for how these experiences are constituted in the relationships of the network. „h To trace the meaning-making processes emerging from the various relations of players/students, facilitators, teachers, designers, technology, researcher, and setting, and consider how the boundaries of the respective ecology are configured and negotiated. „h To draw out the implications for the wider research area of game-based learning by using the simulation game SCAPE as an example for introducing gameplay to educational settings. Accounting in detail for five school classes, these accounts represent, each in its own right, distinct and sometimes controversial forms of engagement in gameplay. The practices and negotiations of all the assembled human and non-human actors highlight the contingent nature of gameplay and learning. In their sum, they offer distinct but by no means exhaustive examples of the various relationships that emerge from the different assemblages of human and non-human actors. This thesis, hence, illustrates that game-based learning in an educational setting is accompanied by considerable unpredictability and uncertainty. As ordinary life spills and leaks into gameplay experiences, group dynamics and the negotiations of technology, I argue that overly deterministic assertions of the game¡¦s intention, as well as a too narrowly defined understanding of the transformative learning outcome, can constrain our inquiries and hinder efforts to further elucidate and understand the evolving uncertainties around game-based learning. Instead, this thesis posits that playing and transformative learning are relational effects of the respective ecology, where all actors are networked in their (partial) enrolment in the process of translation. This study thus attempts to foreground the rich opportunities for exploring how game-based learning is assembled as a network of practices.

A prospective window into medical device-related pressure ulcers in intensive care

Objective: To determine the prevalence, severity, location, etiology, treatment, and healing of medical device-related pressure ulcers in intensive care patients for up to 7 days. Design: Prospective repeated measures study. Setting and participants: Patients in 6 intensive care units of 2 major medical centers, one each in Australia and the United States, were screened 1 day per month for 6 months. Those with device-related ulcers were followed daily up to 7 days. Outcome measures: Device-related ulcer prevalence, pain, infection, treatment, healing. Results: 15/483 patients had device-related ulcers and 9/15 with 11 ulcers were followed beyond screening. Their mean age was 60.5 years, most were men, over-weight, and at increased pressure ulcer risk. Endotracheal and nasogastric tubes were the cause of most device-related ulcers. Repositioning was the most frequent treatment. 4/11 ulcers healed within the 7 day observation period. Conclusion: Device-related ulcer prevalence was 3.1%, similar to that reported in the limited literature available, indicating an ongoing problem. Systematic assessment and repositioning of devices are the mainstays of care. We recommend continued prevalence determination and that nurses remain vigilant to prevent device-related ulcers, especially in patients with nasogastric and endotracheal tubes.

Temporal summation of intrinsically photosensitive retinal ganglion cell (ipRGC) contributions to the human pupil.

Purpose: IpRGCs mediate non-image forming functions including photoentrainment and the pupil light reflex (PLR). Temporal summation increases visual sensitivity and decreases temporal resolution for image forming vision, but the summation properties of nonimage forming vision are unknown. We investigated the temporal summation of inner (ipRGC) and outer (rod/cone) retinal inputs to the PLR. Method: The consensual PLR of the left eye was measured in six participants with normal vision using a Maxwellian view infrared pupillometer. Temporal summation was investigated using a double-pulse protocol (100 ms stimulus pairs; 0–1024 ms inter-stimulus interval, ISI) presented to the dilated fellow right eye (Tropicamide 1%). Stimulus lights (blue λmax = 460 nm; red λmax = 638 nm) biased activity to inneror outer retinal inputs to non-image forming vision. Temporal summation was measured suprathreshold (15.2 log photons.cm−2.s−1 at the cornea) and subthreshold (11.4 log photons.cm−2.s−1 at the cornea). Results: RM-ANOVAs showed the suprathreshold and subthreshold 6 second post illumination pupil response (PIPR: expressed as percentage baseline diameter) did not significantly vary for red or blue stimuli (p > .05). The PIPR for a subthreshold red 16 ms double-pulse control condition did not significantly differ with ISI (p > .05). The maximum constriction amplitude for red and blue 100 ms double- pulse stimuli did not significantly vary with ISI (p > .05). Conclusion: The non-significant changes in suprathreshold PIPR and subthreshold maximum pupil constriction indicate that inner retinal ipRGC inputs and outer retinal photoreceptor inputs to the PLR do not show temporal summation. The results suggest a fundamental difference between the temporal summation characteristics of image forming and non-image forming vision.

Enhanced photocatalytic activity of titanium oxide nanotubes after heating treatment

Titanium oxide nanotubes were obtained by an electrochemical anodization method. Scanning electron microscope results demonstrate that the diameter of the tubes is about 120 nm and the length of the tubes is around 13 μm. Transmission electron microscope results indicate that the nanotubes are assembled by numerous nanoparticles and tube-like structure remains well after heat treatment at 400-600 °C. The photocatalysis performance of the nanotubes was evaluated in terms of the decomposition rate of methyl orange under UV irradiation. The results show that the photocatalytic activity was enhanced through the heating treatment of the nanotubes, and the nanotubes heated at 600 °C exhibits the best photocatalytic activity. X-ray diffraction patterns indicate that there is no phase transformation during the heat treatment. Therefore, the enhanced activity can be attributed to the improvement of nanotubes crystallinity, which may provide more insights about the effect of the crystallinity on the photocatalytic performance.

Large igneous provinces and silicic large igneous provinces : progress in our understanding over the last 25 years

Large Igneous Provinces are exceptional intraplate igneous events throughout Earth’s history. Their significance and potential global impact is related to the total volume of magma intruded and released during these geologically brief events (peak eruptions are often within 1-5 Myrs duration) where millions to tens of millions of cubic kilometers of magma are produced. In some cases, at least 1% of the Earth’s surface has been directly covered in volcanic rock, being equivalent to the size of small continents with comparable crustal thicknesses. Large Igneous Provinces are thus important, albeit episodic episodes of new crust addition. However, most magmatism is basaltic so that contributions to crustal growth will not always be picked up in zircon geochronology studies that better trace major episodes of extension-related silicic magmatism and the silicic Large Igneous Provinces. Much headway has been made on our understanding of these anomalous igneous events over the last 25 years, driving many new ideas and models. This includes their: 1) global spatial and temporal distribution, with a long-term average of one event approximately every 20 Myrs, but a clear clustering of events at times of supercontinent break-up – Large Igneous Provinces are thus an integral part of the Wilson cycle and are becoming an increasingly important tool in reconnecting dispersed continental fragments; 2) compositional diversity that in part reflects their crustal setting of ocean basins, and continental interiors and margins where in the latter setting, LIP magmatism can be silicicdominant; 3) mineral and energy resources with major PGE and precious metal resources being hosted in these provinces, as well as magmatism impacting on the hydrocarbon potential of volcanic basins and rifted margins through enhancing source rock maturation, providing fluid migration pathways, and trap formation; 4) biospheric, hydrospheric and atmospheric impacts, with Large Igneous Provinces now widely regarded as a key trigger mechanism for mass extinctions, although the exact kill mechanism(s) are still being resolved; 5) role in mantle geodynamics and thermal evolution of the Earth, by potentially recording the transport of material from the lower mantle or core-mantle boundary to the Earth's surface and being a fundamental component in whole mantle convection models; and 6) recognition on the inner planets where the lack of plate tectonics and erosional processes and planetary antiquity means that the very earliest record of LIP events during planetary evolution may be better preserved than on Earth.

In situ SANS study of the surface and pore filling adsorption of subcritical and supercritical CO2 in porous silica as a function of pore size

We applied small-angle neutron scattering (SANS) and ultra small-angle neutron scattering (USANS) to monitor evolution of the CO2 adsorption in porous silica as a function of CO2 pressure and temperature in pores of different sizes. The range of pressures (0 < P < 345 bar) and temperatures (T=18 OC, 35 OC and 60 OC) corresponded to subcritical, near critical and supercritical conditions of bulk fluid. We observed that the adsorption behavior of CO2 is fundamentally different in large and small pores with the sizes D > 100 Å and D < 30 Å, respectively. Scattering data from large pores indicate formation of a dense adsorbed film of CO2 on pore walls with the liquid-like density (ρCO2)ads≈0.8 g/cm3. The adsorbed film coexists with unadsorbed fluid in the inner pore volume. The density of unadsorbed fluid in large pores is temperature and pressure dependent: it is initially lower than (ρCO2)ads and gradually approaches it with pressure. In small pores compressed CO2 gas completely fills the pore volume. At the lowest pressures of the order of 10 bar and T=18 OC, the fluid density in smallest pores available in the matrix with D ~ 10 Å exceeds bulk fluid density by a factor of ~ 8. As pressure increases, progressively larger pores become filled with the condensed CO2. Fluid densification is only observed in pores with sizes less than ~ 25 – 30 Å. As the density of the invading fluid reaches (ρCO2)bulk~ 0.8 g/cm3, pores of all sizes become uniformly filled with CO2 and the confinement effects disappear. At higher densities the fluid in small pores appears to follow the equation of state of bulk CO2 although there is an indication that the fluid density in the inner volume of large pores may exceed the density of the adsorbed layer. The equivalent internal pressure (Pint) in the smallest pores exceeds the external pressure (Pext) by a factor of ~ 5 for both sub- and supercritical CO2. Pint gradually approaches Pext as D → 25 – 30 Å and is independent of temperature in the studied range of 18 OC ≤ T ≤ 60 OC. The obtained results demonstrate certain similarity as well as differences between adsorption of subcritical and supercritical CO2 in disordered porous silica. High pressure small angle scattering experiments open new opportunities for in situ studies of the fluid adsorption in porous media of interest to CO2 sequestration, energy storage, and heterogeneous catalysis.

Social adjustment and symptomatology in two types of homeless adolescents : runaways and throwaways

Previous research on homeless adolescents has largely ignored the distinction between those who have left home on their volition (runaways) and those who have been forced to leave (throwaways). Fifty-two homeless adolescents in Brisbane, Australia, were assessed to compare male and female runaways and throwaways for social adjustment and symptomatology. Differences for social adjustment (antisocial tendencies and aggression) and symptomatology (social isolation and depression) were predicted. Results indicated that male runaways were significantly more hostile than male throwaways (p < 0,001), and significantly more socially isolated than female runaways (p < 0,025). Female throwaways, however, were significantly more hostile than male throwaways (p < 0,025) and female runaways (p < 0,025). Yet homeless males overall had a significantly stronger urge to act out hostility than homeless females (p < 0,025). In addition, female throwaways were significantly more antisocial than male throwaways (p < 0,001). There were no significant differences for depression. A theory of inner social control (Hirschi, 1969), postulating absence of bonding in earlier socialization, was supported.

Breast cancer detection from thermal images using bispectral invariant features

Highly sensitive infrared (IR) cameras provide high-resolution diagnostic images of the temperature and vascular changes of breasts. These images can be processed to emphasize hot spots that exhibit early and subtle changes owing to pathology. The resulting images show clusters that appear random in shape and spatial distribution but carry class dependent information in shape and texture. Automated pattern recognition techniques are challenged because of changes in location, size and orientation of these clusters. Higher order spectral invariant features provide robustness to such transformations and are suited for texture and shape dependent information extraction from noisy images. In this work, the effectiveness of bispectral invariant features in diagnostic classification of breast thermal images into malignant, benign and normal classes is evaluated and a phase-only variant of these features is proposed. High resolution IR images of breasts, captured with measuring accuracy of ±0.4% (full scale) and temperature resolution of 0.1 °C black body, depicting malignant, benign and normal pathologies are used in this study. Breast images are registered using their lower boundaries, automatically extracted using landmark points whose locations are learned during training. Boundaries are extracted using Canny edge detection and elimination of inner edges. Breast images are then segmented using fuzzy c-means clustering and the hottest regions are selected for feature extraction. Bispectral invariant features are extracted from Radon projections of these images. An Adaboost classifier is used to select and fuse the best features during training and then classify unseen test images into malignant, benign and normal classes. A data set comprising 9 malignant, 12 benign and 11 normal cases is used for evaluation of performance. Malignant cases are detected with 95% accuracy. A variant of the features using the normalized bispectrum, which discards all magnitude information, is shown to perform better for classification between benign and normal cases, with 83% accuracy compared to 66% for the original.

Area of residence is associated with Australian women’s uptake of long-acting contraception

Objective: Several new types of contraception became available in Australia over the last twelve years (the implant in 2001, progestogen intra-uterine device (IUD) in 2003, and vaginal contraceptive ring in 2007). Most methods of contraception require access to health services. Permanent sterilisation and the insertion of an implant or IUD involve a surgical procedure. Access to health professionals providing these specialised services may be more difficult in rural areas. This paper examines uptake of permanent or long-acting reversible contraception (LARCs) among Australian women in rural areas compared to women in urban areas. Method: Participants in the Australian Longitudinal Study on Women's Health born in 1973-78 reported on their contraceptive use at three surveys: 2003, 2006 and 2009. Contraceptive methods included permanent sterilisation (tubal ligation, vasectomy), non-daily or LARC methods (implant, IUD, injection, vaginal ring), and other methods including daily, barrier or "natural" methods (oral contraceptive pills, condoms, withdrawal, safe period). Sociodemographic, reproductive history and health service use factors associated with using permanent, LARC or other methods were examined using a multivariable logistic regression analysis. Results: Of 9,081 women aged 25-30 in 2003, 3% used permanent methods and 4% used LARCs. Six years later in 2009, of 8,200 women (aged 31-36), 11% used permanent methods and 9% used LARCs. The fully adjusted parsimonious regression model showed that the likelihood of a woman using LARCs and permanent methods increased with number of children. Women whose youngest child was school-age were more likely to use LARCs (OR=1.83, 95%CI 1.43-2.33) or permanent methods (OR=4.39, 95%CI 3.54-5.46) compared to women with pre-school children. Compared to women living in major cities, women in inner regional areas were more likely to use LARCs (OR=1.26, 95%CI 1.03-1.55) or permanent methods (OR=1.43, 95%CI 1.17-1.76). Women living in outer regional and remote areas were more likely than women living in cities to use LARCs (OR=1.65, 95%CI 1.31-2.08) or permanent methods (OR=1.69, 95%CI 1.43-2.14). Women with poorer access to GPs were more likely to use permanent methods (OR=1.27, 95%CI 1.07-1.52). Conclusions: Location of residence and access to health services are important factors in women's choices about long-acting contraception in addition to the number and age of their children. There is a low level of uptake of non-daily, long-acting methods of contraception among Australian women in their mid-thirties.

Imagining neighbourhood-based community : an autoethnography

This research is an autoethnographic investigation of consumption experiences, public and quasi-public spaces, and their relationship to community within an inner city neighbourhood. The research specifically focuses on the gentrifying inner city, where class-based processes of change can have implications for people’s abilities to remain within, or feel connected to place. However, the thesis draws on broader theories of the throwntogetherness of the contemporary city (e.g., Amin and Thrift, 2002; Massey 2005) to argue that the city is a space where place-based meanings cannot be seen to be fixed, and are instead better understood as events of place – based on ever shifting interrelations between the trajectories of people and things. This perspective argues the experience of belonging to community is not just born of a social encounter, but also draws on the physical and symbolic elements of the context in which it is situated. The thesis particularly explores the ways people construct identifications within this shifting urban environment. As such, consumption practices and spaces offer one important lens through which to explore the interplay of the physical, social and symbolic. Consumer research tells us that consumption practices can facilitate experiences in which identity-defining meaning can be generated and shared. Consumption spaces can also support different kinds of collective identification – as anchoring realms for specific cultural groups or exposure realms that enable individuals to share in the identification practices of others with limited risk (Aubert-Gamet & Cova, 1999). Furthermore, the consumption-based lifestyles that gentrifying inner city neighbourhoods both support and encourage can also mean that consumption practices may be a key reason that people are moving through public space. That is, consumption practices and spaces may provide a purpose for which – and spatial frame against which – our everyday interactions and connections with people and objects are undertaken within such neighbourhoods. The purpose of this investigation then was to delve into the subjectivities at the heart of identifying with places, using the lens of our consumption-based experiences within them. The enquiry describes individual and collective identifications and emotional connections, and explores how these arise within and through our experiences within public and quasi-public spaces. It then theorises these ‘imaginings’ as representative of an experience of community. To do so, it draws on theories of imagination and its relation to community. Theories of imagined community remind us that both the values and identities of community are held together by projections that create relational links out of objects and shared practices (e.g., Benedict Anderson, 2006; Urry, 2000). Drawing on broader theories of the processes of the imagination, this thesis suggests that an interplay between reflexivity and fantasy – which are products of the critical and the fascinated consciousness – plays a role in this imagining of community (e.g., Brann, 1991; Ricoeur, 1994). This thesis therefore seeks to explore how these processes of imagining are implicated within the construction of an experience of belonging to neighbourhood-based community through consumption practices and the public and quasi-public spaces that frame them. The key question of this thesis is how do an individual’s consumption practices work to construct an imagined presence of neighbourhood-based community? Given the focus on public and quasi-public spaces and our experiences within them, the research also asked how do experiences in the public and quasi-public spaces that frame these practices contribute to the construction of this imagined presence? This investigation of imagining community through consumption practices is based on my own experiences of moving to, and attempting to construct community connections within, an inner city neighbourhood in Melbourne, Australia. To do so, I adopted autoethnographic methodology. This is because autoethnography provides the methodological tools through which one can explore and make visible the subjectivities inherent within the lived experiences of interest to the thesis (Ellis, 2004). I describe imagining community through consumption as an extension of a placebased self. This self is manifest through personal identification in consumption spaces that operate as anchoring realms for specific cultural groups, as well as through a broader imagining of spaces, people, and practices as connected through experiences within realms of exposure. However, this is a process that oscillates through cycles of identification; these anchor one within place personally, but also disrupt those attachments. This instability can force one to question the orientation and motives of these imaginings, and reframe them according to different spaces and reference groups in ways that can also work to construct a more anonymous and, conversely, more achievable collective identification. All the while, the ‘I’ at the heart of this identification is in an ongoing process of negotiation, and similarly, the imagined community is never complete. That is, imagining community is a negotiation, with people and spaces – but mostly with the different identifications of the self. This thesis has been undertaken by publication, and thus the process of imagining community is explored and described through four papers. Of these, the first two focus on specific types of consumption spaces – a bar and a shopping centre – and consider the ways that anchoring and exposure within these spaces support the process of imagining community. The third paper examines the ways that the public and quasi-public spaces that make up the broader neighbourhood context are themselves throwntogether as a realm of exposure, and considers the ways this shapes my imaginings of this neighbourhood as community. The final paper develops a theory of imagined community, as a process of comparison and contrast with imagined others, to provide a summative conceptualisation of the first three papers. The first paper, chapter five, explores this process of comparison and contrast in relation to authenticity, which in itself is a subjective assessment of identity. This chapter was written as a direct response to the recent work of Zukin (2010), and draws on theories of authenticity as applied to personal and collective identification practices by consumer researchers Arnould and Price (2000). In this chapter, I describe how my assessments of the authenticity of my anchoring experiences within one specific consumption space, a neighbourhood bar, are evaluated in comparison to my observations of and affective reactions to the social practices of another group of residents in a different consumption space, the local shopping centre. Chapter five also provides an overview of the key sites and experiences that are considered in more detail in the following two chapters. In chapter six, I again draw on my experiences within the bar introduced in chapter five, this time to explore the process of developing a regular identity within a specific consumption space. Addressing the popular theory of the cafe or bar as third place (Oldenburg, 1999), this paper considers the purpose of developing anchored relationships with people within specific consumption spaces, and explores the different ways this may be achieved in an urban context where the mobilities and lifestyle practices of residents complicate the idea of a consumption space as an anchoring or third place. In doing so, this chapter also considers the manner in which this type of regular identification may be seen to be the beginning of the process of imagining community. In chapter seven, I consider the ways the broader public spaces of the neighbourhood work cumulatively to expose different aspects of its identity by following my everyday movements through the neighbourhood’s shopping centre and main street. Drawing on the theories of Urry (2000), Massey (2005), and Amin (2007, 2008), this chapter describes how these spaces operate as exposure realms, enabling the expression of different senses of the neighbourhood’s spaces, times, cultures, and identities through their physical, social, and symbolic elements. Yet they also enable them to be united: through habitual pathways, group practices of appropriation of space, and memory traces that construct connections between objects and experiences. This chapter describes this as a process of exposure to these different elements. Our imagination begins to expand the scope of the frames onto which it projects an imagined presence; it searches for patterns within the physical, social, and symbolic environment and draws connections between people and practices across spaces. As the final paper, chapter eight, deduces, it is in making these connections that one constructs the objects and shared practices of imagined community. This chapter describes this as an imagining of neighbourhood as a place-based extension of the self, and then explores the ways in which I drew on physical, social, and symbolic elements in an attempt to construct a fit between the neighbourhood’s offerings and my desires for place-based identity definition. This was as a cumulative but fragmented process, in which positive and negative experiences of interaction and identification with people and things were searched for their potential to operate as the objects and shared practices of imagined community. This chapter describes these connections as constructed through interplay between reflexivity and fantasy, as the imagination seeks balance between desires for experiences of belonging, and the complexities of constructing them within the throwntogether context of the contemporary city. The conclusion of the thesis describes the process of imagining community as a reflexive fantasy, that is, as a product of both the critical and fascinated consciousness (Ricoeur, 1994). It suggests that the fascinated consciousness imbues experiences with hope and desire, which the reflexive imagining can turn to disappointment and shame as it critically reflects on the reality of those fascinated projections. At the same time, the reflexive imagination also searches the practices of others for affirmation of those projections, effectively seeking to prove the reality of the fantasy of the imagined community.