Advanced UV inscribed fibre grating structures and applications in optical sensing and laser systems

This thesis presents detailed investigation of UV inscribed fibre grating based devices and novel developments in the applications of such devices in optical sensing and fibre laser systems. The major contribution of this PhD programme includes the systematic study on fabrication, spectral characteristics and applications of different types of UV written in-fibre gratings such as Type I and IA Fibre Bragg Gratings (FBGs), Chirped Fibre Bragg Gratings (CFBGs) and Tilted Fibre Gratings (TFGs) with small, large and 45º tilted structures inscribed in normal silica fibre. Three fabrication techniques including holographic, phase-mask and blank beam exposure scanning, which were employed to fabricate a range of gratings in standard single mode fibre, are fully discussed. The thesis reports the creation of smart structures with self-sensing capability by embedding FBG-array sensors in Al matrix composite. In another part of this study, we have demonstrated the particular significant improvements made in sensitising standard FBGs to the chemical surrounding medium by inducing microstructure to the grating by femtosecond (fs) patterning assisted chemical etching technique. Also, a major work is presented for the investigation on the structures, inscription methods and spectral Polarisation Dependent Loss (PDL) and thermal characteristics of different angle TFGs. Finally, a very novel application in realising stable single polarisation and multiwavelength switchable Erbium Doped Fibre Lasers (EDFLs) using intracavity polarisation selective filters based on TFG devices with tilted structures at small, large and exact 45° angles forms another important contribution of this thesis.

An exploratory study of management accounting and control systems in a developing country

This thesis reports on the results of case studies in four commercial banks in Nigeria. The study focuses how management accounting and control systems (MCS) operate in the four banks. The study is motivated by the dearth of literature on management accounting practices in the developing world in general and in Nigeria in specific. The case study approach adopted in conducting the research was useful in exploring the dynamics of the MCS in the organisations. Data was gathered from two sources. First, semi-structured interviews were conducted with managers at the head office, regional office and branches of each bank. The participants were selected from different backgrounds and managerial levels to provide broader understanding of the operations of the MCS. Second, various internal and external documents were reviewed to provide supporting evidence for the interview results. New institutional sociology (NIS) provided the theoretical framework to understand the results. NIS provided explanations for how the MCS in the four banks were shaped by diverse external and internal factors. The key factors identified as shaping the operations of the MCS were the need to comply with the regulatory environment (coercive isomorphism), the need to maintain social and cultural support (normative isomorphism) and the need to imitate successful organisations in order to appear legitimate (mimetic isomorphism). The study also examines the interplay between the institutional forces, market forces and infra-organisational power relations. This analysis is necessary to overcome the criticism of NIS that it downplays the role of market forces, agency and intra-organisational relations. The findings of the study have implications for understanding the operations of MCS in the developing world.

Information management and the holistic, process-oriented enterprise

This research examines the role of the information management process within a process-oriented enterprise, Xerox Ltd. The research approach is based on a post-positive paradigm and has resulted in thirty-five idiographic statements. The three major outcomes are: 1. The process-oriented holistic enterprise is an organisation that requires a long-term management commitment to its development. It depends on the careful management of people, tasks, information and technology. A complex integration of business processes is required and this can be managed through the use of consistent documentation techniques, clarity in the definition of process responsibilities and management attention to the global metrics and the centralisation of the management of the process model are critical to its success. 2. The role of the information management process within the context of a process-oriented enterprise is to provide flexible and cost-effective applications, technological, and process support to the business. This is best achieved through a centralisation of the management of information management and of the process model. A business-led approach combined with the consolidation of applications, information, process, and data architectures is central to providing effective business and process-focused support. 3. In a process oriented holistic enterprise, process and information management are inextricably linked. The model of process management depends heavily on information management, whilst the model of information management is totally focused around supporting and creating the process model. The two models are mutually creating - one cannot exist without the other. There is a duality concept of process and information management.

Strategy and control systems:a framework for analysis

This research explores the links between the strategies adopted by companies and the mechanisms used to control the organisation. This is not seen as a one way process with the control system following from the strategy but rather as an interactive process between the control systems, the environment and the business strategy. The main proposition of the research, derived from a review of the relevant literature, is that the dimensions of Business Pro-Activity and Environmental Change provide a plausible explanation of the reasons why companies need to adopt different strategies in order to be successful in different markets. A model is proposed which links these dimensions with the business strategy, organisational structure, strategic planning system and management control systems. The model is used as a framework for analysing four companies in order to further our understanding of these interactions and the mechanisms which act to both promote and resist change. Whilst it is not suggested that the model in its present form is a perfect instrument it has, during the course of this research, proved to be an appropriate framework for analysing the various mechanisms used by four companies to formulate and implement their strategies. The research reveals that these should not be viewed independently but as a balanced system.

Investigating the supply and demand relationship in a profession: the English and Welsh schools of librarianship and information Studies and the Higher Education Library and Information Services employment sector in England and Wales.

Concern has been expressed in the professional literature - borne out by professional experience and observation - that the supply and demand relationship existing between the 13 English and Welsh Library and Information Studies (LIS) Schools (as providers of `First Professional' staff) and the Higher Education Library and Information Services (HE LIS) sector of England and Wales (as one group of employers of such staff) is unsatisfactory and needs attention. An appropriate methodology to investigate this problem was devised. A basic content analysis of Schools' curricular and recruitment material intended for public consumption was undertaken to establish an overview of the LIS initial professional education system in England and Wales, and to identify and analyse any covert messages imparted to readers. This was followed by a mix of Main Questionnaires and Semi-Structured Interviews with appropriate populations. The investigation revealed some serious areas of dissatisfaction by the HE LIS Chiefs with the role and function of the Schools. Considerable divergence of views emerged on the state of the working relationships between the two sectors and on the Schools' successes in meeting the needs of the HE LIS sector and on CPD provision. There were, however, areas of substantial and consistent agreement between the two sectors. The main implications of the findings were that those areas encompassing divergence of views were worrying and needed addressing by both sides. Possible ways forward included recommendations on improving the image of the profession purveyed by the Schools; the forming of closer and more effective inter-sectoral relationships; recognising fully the importance of `practicum' and increasing and sustaining the network of `practicum' providers.

Modulation of certain 5-HT-related behaviours by serotonergic and noradrenergic systems

The modulation of 5-hydroxytryptamine (5-HT)-related head-twitchbehaviour by antimigraine drugs and migraine triggers was examined inmice. The antimigraine drugs examined produced either inhibition or noeffect on 5-HT-related head-twitching. On the basis of these resultsit is suggested that 5-HT-related head-twitching is unlikely to beuseful in the preclinical screening and discovery of systemically-activeantimigraine agents. The migraine triggers examined, tyramineand beta-PEA initially produced a repeatable complex time-relatedeffect on 5-HT-related head-twitching, with both inhibition andpotentiation of this behaviour being observed, however, when furtherexamination of the effect of the migraine triggers on 5-HT-relatedhead-twitching was attempted some time later the effects seeninitially were no longer produced. The effect of (±)-1-<2, 5-dimethoxy-4-iodophenyl)-2-aminopropane,((±)DOl), on on-going behaviour of mice and rats was examined. Shakingbehaviour was observed in both species. In mice, excessive scratchingbehaviour was also present. (±)DOl-induced scratching and shakingbehaviour were found to be differentially modulated by noradrenergicand serotonergic agents, however, the fact that both behaviours wereblocked by ritanserin (5-HT2/5-HT1c receptor antagonist) and inhibitedby FLA-63 (a dopamine-beta-oxidase inhibitor which depletesnoradrenaline), suggests the pathways mediating these behaviours mustbe convergent in some manner, and that both behaviours require intact5-HT receptors, probably 5-HT2 receptors, for their production. Ingeneral, the behavioural profile of (±)DOI was as expected for anagent which exhibits high affinity binding to 5-HT2/5-HT1c receptors.Little sign of the 5-HTl-related '5-HT syndrome' was seen in eithermice or rats. The effect of a variety of noradrenergic agents on head-twitchinginduced by a variety of shake-inducing agents was examined. A patternof modulatory effect was seen whereby the modulatory effect of thenoradrenergic agents on 5-hydroxytryptophan <5-HTP) (and in some cases, 5-methoxy-N,N-dimethyltryptamine (5-MeODMT)) was found to be the opposite of that observed with quipazine and (±)DOI. The relationship between these effects, and their implications for understanding the pharmacology of centrally acting drugs is discussed.

Modelling manufacturing planning and control systems:the application of object-oriented principles and discrete-event simulation

Manufacturing planning and control systems are fundamental to the successful operations of a manufacturing organisation. 10 order to improve their business performance, significant investment is made by companies into planning and control systems; however, not all companies realise the benefits sought Many companies continue to suffer from high levels of inventory, shortages, obsolete parts, poor resource utilisation and poor delivery performance. This thesis argues that the fit between the planning and control system and the manufacturing organisation is a crucial element of success. The design of appropriate control systems is, therefore, important. The different approaches to the design of manufacturing planning and control systems are investigated. It is concluded that there is no provision within these design methodologies to properly assess the impact of a proposed design on the manufacturing facility. Consequently, an understanding of how a new (or modified) planning and control system will perform in the context of the complete manufacturing system is unlikely to be gained until after the system has been implemented and is running. There are many modelling techniques available, however discrete-event simulation is unique in its ability to model the complex dynamics inherent in manufacturing systems, of which the planning and control system is an integral component. The existing application of simulation to manufacturing control system issues is limited: although operational issues are addressed, application to the more fundamental design of control systems is rarely, if at all, considered. The lack of a suitable simulation-based modelling tool does not help matters. The requirements of a simulation tool capable of modelling a host of different planning and control systems is presented. It is argued that only through the application of object-oriented principles can these extensive requirements be achieved. This thesis reports on the development of an extensible class library called WBS/Control, which is based on object-oriented principles and discrete-event simulation. The functionality, both current and future, offered by WBS/Control means that different planning and control systems can be modelled: not only the more standard implementations but also hybrid systems and new designs. The flexibility implicit in the development of WBS/Control supports its application to design and operational issues. WBS/Control wholly integrates with an existing manufacturing simulator to provide a more complete modelling environment.

Automatic indexing and retrieval of encounter-specific evidence for point-of-care support

Evidence-based medicine relies on repositories of empirical research evidence that can be used to support clinical decision making for improved patient care. However, retrieving evidence from such repositories at local sites presents many challenges. This paper describes a methodological framework for automatically indexing and retrieving empirical research evidence in the form of the systematic reviews and associated studies from The Cochrane Library, where retrieved documents are specific to a patient-physician encounter and thus can be used to support evidence-based decision making at the point of care. Such an encounter is defined by three pertinent groups of concepts - diagnosis, treatment, and patient, and the framework relies on these three groups to steer indexing and retrieval of reviews and associated studies. An evaluation of the indexing and retrieval components of the proposed framework was performed using documents relevant for the pediatric asthma domain. Precision and recall values for automatic indexing of systematic reviews and associated studies were 0.93 and 0.87, and 0.81 and 0.56, respectively. Moreover, precision and recall for the retrieval of relevant systematic reviews and associated studies were 0.89 and 0.81, and 0.92 and 0.89, respectively. With minor modifications, the proposed methodological framework can be customized for other evidence repositories. © 2010 Elsevier Inc.

Omnigen:providing electricity, food preparation, cold storage and pure water using a variety of local fuels

We describe a polygeneration system that can run on neat plant oils, such as Jatropha and Pongamia, or standard diesel fuel. A prototype has been constructed using a compression ignition engine of 9.9 kW shaft output. It consumes 3 L/h of fuel and will produce 40 kg/h of ice by means of an adsorption refrigerator powered from the engine jacket heat. Steaming of rice, deep and shallow frying, and other types of food preparation heated by the exhaust gas have been demonstrated. In addition, the feasibility of producing distilled water by means of multiple-effect distillation powered by the engine waste heat is shown. Overall plant efficiency and potential savings in greenhouse gas emissions are discussed. © 2012 Elsevier Ltd.

Properties of intention:component structure and consequences for behavior, information processing and resistance

Three studies tested the impact of properties of behavioral intention on intention-behavior consistency, information processing, and resistance. Principal components analysis showed that properties of intention formed distinct factors. Study 1 demonstrated that temporal stability, but not the other intention attributes, moderated intention-behavior consistency. Study 2 found that greater stability of intention was associated with improved memory performance. In Study 3, participants were confronted with a rating scale manipulation designed to alter their intention scores. Findings showed that stable intentions were able to withstand attack. Overall, the present research findings suggest that different properties of intention are not simply manifestations of a single underlying construct ("intention strength"), and that temporal stability exhibits superior resistance and impact compared to other intention attributes. © 2013 Wiley Periodicals, Inc.

The analogue computer simulation of integrated chemical plant and controller systems

DUE TO COPYRIGHT RESTRICTIONS ONLY AVAILABLE FOR CONSULTATION AT ASTON UNIVERSITY LIBRARY SERVICES WITH PRIOR ARRANGEMENT