Development and Application of a Methodology to Identify Projects of Energy Community Interest

Projects of Energy Community Interest” (PECIs) is a label attached to those projects which have the highest positive impact in the largest possible number of Contracting Parties. The assessment of one hundred projects submitted as candidates, and final selection of 35 PECIs was achieved in a collaborative process undertaken by the same Task Force that contributed to the preparation of the Energy Strategy. Chaired by the European Commission, the Task Force was facilitated by the Energy Community Secretariat and benefited from technical assistance of a Consultant sponsored from the Energy Community budget.

Development of an odor management plan for industrial stationary sources in an urban environment: A case study for Broward County, Florida

Objectionable odors remain at the top of air pollution complaints in urban areas such as Broward County that is subject to increasing residential and industrial developments. The odor complaints in Broward County escalated by 150 percent for the 2001 to 2004 period although the population increased by only 6 percent. It is estimated that in 2010 the population will increase to 2.5 million. Relying solely on enforcing the local odor ordinance is evidently not sufficient to manage the escalating odor complaint trends. An alternate approach similar to odor management plans (OMPs) that are successful in managing major malodor sources such as animal farms is required. ^ This study aims to develop and determine the feasibility of implementing a comprehensive odor management plan (COMP) for the entire Broward County. Unlike existing OMPs for single sources where the receptors (i.e. the complainants) are located beyond the boundary of the source, the COMP addresses a complex model of multiple sources and receptors coexisting within the boundary of the entire county. Each receptor is potentially subjected to malodor emissions from multiple sources within the county. Also, the quantity and quality of the source/receptor variables are continuously changing. ^ The results of this study show that it is feasible to develop a COMP that adopts a systematic procedure to: (1) Generate maps of existing odor complaint areas and malodor sources, (2) Identify potential odor sources (target sources) responsible for existing odor complaints, (3) Identify possible odor control strategies for target sources, (4) Determine the criteria for implementing odor control strategies, (5) Develop an odor complaint response protocol, and (6) Conduct odor impact analyses for new sources to prevent future odor related issues. Geographic Information System (GIS) is used to identify existing complaint areas. A COMP software that incorporates existing United States Environmental Protection Agency (EPA) air dispersion software is developed to determine the target sources, predict the likelihood of new complaints, and conduct odor impact analysis. The odor response protocol requires pre-planning field investigations and conducting surveys to optimize the local agency available resources while protecting the citizen's welfare, as required by the Clean Air Act. ^

Student Independent Projects Environmental Studies 2011: Vending Machines and Sustainable Development on Grenfell Campus, Memorial University

This Paper discusses the food and beverage machines that are located at Memorial University's Grenfell Campus and endeavors to assess how much those vending machines are being used and how they affect sustainability initiatives on campus. A survey was conducted to gauge the use of vending machines, their content and what is purchased, and if participants did not purchase from thes machines they were also asked why they did not.This survey produced many other questions that are directly linked to vending machines.Water quality on campus was heavily disscussed, along with the use of bottled water and implications associated with drinking only from bottles that are thrown away. The study concludes with a discussion of the alternative choices that can be implemented to replace vending machines.

China in Global Value Chains: Implications for Industrial Policy and Development

Rapid technological advances and liberal trade regimes permit functional reintegration of dispersed activities into new border-spanning business networks variously referred to as global value chains (GVCs). Given that the gains of a country from GVCs depend on the activities taking place in its jurisdiction and their linkages to global markets, this study starts by providing a descriptive overview of China’s economic structure and trade profile. The first two chapters of this paper demonstrate what significant role GVCs have played in China’s economic growth, evident in enhanced productivity, diversification, and sophistication of China’s exports, and how these economic benefits have propelled China’s emergence as the world’s manufacturing hub in the past two decades. However, benefits from GVC participation – in particular technological learning, knowledge building, and industrial upgrading – are not automatic. What strategies would help Chinese industries engage with GVCs in ways that are deemed sustainable in the long run? What challenges and related opportunities China would face throughout the implementation process? The last two chapters of this paper focus on implications of GVCs for China’s industrial policy and development. Chapter Three examines how China is reorienting its manufacturing sector toward the production of higher value-added goods and expanding its service sector, both domestically and internationally; while Chapter Four provides illustrative policy recommendations on dealing with the positive and negative outcomes triggered by GVCs, within China and beyond the country’s borders. To the end, this study also hopes to shed some light on the lessons and complexities that arise from GVC participation for other developing countries.

A Framework to Capture and Share Knowledge Using Storytelling and Video Sharing in Global Product Development

In global engineering enterprises, information and knowledge sharing are critical factors that can determine a project’s success. This statement is widely acknowledged in published literature. However, according to some academics, tacit knowledge is derived from a person’s lifetime of experience, practice, perception and learning, which makes it hard to capture and document in order to be shared. This project investigates if social media tools can be used to improve and enable tacit knowledge sharing within a global engineering enterprise. This paper first provides a brief background of the subject area, followed by an explanation of the industrial investigation, from which the proposed knowledge framework to improve tacit knowledge sharing is presented. This project’s main focus is on the improvement of collaboration and knowledge sharing amongst product development engineers in order to improve the whole product development cycle.

Do Institutional Participatory Projects Contribute to the Development of Political Capabilities?

Participation usually sets off from the bottom up, taking the form of more or less enduring forms of collective action with varying degrees of infl uence. However, a number of projects have been launched by political institutions in the last decades with a view to engaging citizens in public affairs and developing their democratic habits, as well as those of the administration. This paper analyses the political qualifying capacity of the said projects, i.e. whether participating in them qualifi es individuals to behave as active citizens; whether these projects foster greater orientation towards public matters, intensify (or create) political will, and provide the necessary skills and expertise to master this will. To answer these questions, data from the comparative analysis of fi ve participatory projects in France and Spain are used, shedding light on which features of these participatory projects contribute to the formation of political subjects and in which way. Finally, in order to better understand this formative dimension, the formative capacity of institutional projects is compared with the formative dimension of other forms of participation spontaneously developed by citizens.

Sustainability, creativity and innovation in project management – Model development for assessing organizational performance through projects

Today a number of studies are published on how organizational strategy is developed and how organizations contribute to local and regional development through the realization of these strategies. There are also many articles dealing with the success of a project by identifying the criteria and the factors that influence them. This article introduces the project-oriented strategic planning process that reveals how projects contribute to local and regional development and demonstrates the relationship between this approach and the regional competitiveness model as well as the KRAFT concept. There is a lot of research that focuses on sustainability in business. These studies argue that sustainability is very important to the success of a business in the future. The Project Excellence Model that analyses project success does not contain the sustainability criteria; the GPM P5 standard consists of sustainability components related either to the organizational level. To fill this gap a Project Sustainability Excellence Model (PSEM) was developed. The model was tested by interviews with managers of Hungarian for-profit and non-profit organizations. This paper introduces the PSEM and highlights the most important elements of the empirical analysis.

Project Development Information Packet for Federal-Aid City and County Projects, 1997

In August, 1994, the Office of Local Systems, Project Development Division, Iowa Department of Transportation established a Quality Improvement Team to review and improve upon the federal-aid project development process. The mission was to communicate federal-aid project development procedures to local agencies, beginning with the approval of the Statewide Transportation Improvement Program (STIP) and ending with obligation of federal funds by the Federal Highway Administration (FHWA). In January 1997, another Team (Make it Better) began meeting to clarify, update, and streamline the federal-aid project process. This Project Development Packet is a compilation of these efforts. The packet includes Project Development timelines, flow charts, guidelines, design criteria, Instructional Memorandums and forms to assist in the federal-aid project development process. The main (fold out) flow chart directs to other sections of the packet when appropriate.

Financing local development through crowdfunding: An empirical analysis of social projects in Portugal

Crowdfunding (CF) is an increasingly attractive source to fund social projects. However, to our best knowledge, the study of CF for social purposes has remained largely unexplored in the literature. This research envisages a detailed examination of the role of CF on the early-stage of the social projects at regional level. By comparing the characteristics of the projects available in the Portuguese Social Stock Exchange (PSSE) platform with others that did not use this source of financial support, we explore its role on regional development. The results we got show that, in most cases, both PSSE and Non-Governmental Organizations projects complemented the services offered by the State or by the private sector. Furthermore, about a quarter of the projects present in PSSE operated in areas that were not being addressed neither by the services offered by the State nor by the ones of the private sector. The results attained show that more recent social ventures have a greater propensity to use PSSE. The same is find in those organizations which work closely with the target audience. We also observed that the use of PSSE was correlated with the geographical scope of the Social Venture. The circumstance of having the social organization acting at a local or regional level seems to be strongly associated with the possibility of using social crowdfunding for financing social projects.

Biomachining of oxygen-free copper: development of a continuous process for industrial application

245 p.

Medical Device Development: the challenge for ergonomics

High quality, well designed medical devices are necessary to provide safe and effective clinical care for patients as well as to ensure the health and safety of professional and lay device users. Capturing the user requirements of users and incorporating these into design is an essential component of this. The field of ergonomics has an opportunity to assist, not only with this area, but also to encourage a more general consideration of the user during medical device development. A review of the literature on methods for assessing user requirements in engineering and ergonomics found that little published work exists on the ergonomics aspects of medical device development. In particular there is little advice available to developers on which issues to consider during design and development or recommendations for good practice in terms of the methods and approaches needed to capture the full range of user requirements. The Multidisciplinary Assessment of Technology Centre for Healthcare (MATCH) is a research collaboration that is working in conjunction with industrial collaborators to apply ergonomics methods to real case study projects with the ultimate aim of producing an industry-focused guide to applying ergonomics principles in medical device development.

Use of Products and Systems for Scientific and Technical College Education and Development for Industrial

Have been less than thirty years since a group of graduate students and computer scientists working on a federal contract performed the first successful connection between two computers located at remote sites. This group known as the NWG Network Working Group, comprised of highly creative geniuses who as soon as they began meeting started talking about things like intellectual graphics, cooperating processes, automation questions, email, and many other interesting possibilities 1 . In 1968, the group's task was to design NWG's first computer network, in October 1969, the first data exchange occurred and by the end of that year a network of four computers was in operation. Since the invention of the telephone in 1876 no other technology has revolutionized the field of communications over the computer network. The number of people who have made great contributions to the creation and development of the Internet are many, the computer network a much more complex than the phone is the result of people of many nationalities and cultures. However, remember that some years later in 19732 two computer scientists Robert Kahn and Vinton Cerft created a more sophisticated communication program called Transmission Control Protocol - Internet Protocol TCP / IP which is still in force in the Internet today.

MATCH: a new industry-focused approach to medical device development

MATCH (Multidisciplinary Assessment of Technology Centre for Healthcare) is a new collaboration in the UK that aims to support the healthcare sector by creating methods to assess the value of medical devices from concept through to mature product. A major aim of MATCH is to encourage the inclusion of the user throughout the product lifecycle in order to achieve devices that truly meet the requirements of their users. A review of the published literature indicates that user requirements are mainly collected during the design and evaluation stage of the product lifecycle whilst other areas, including the concept stage, have less user involvement. Complementing the literature review is an in-depth consultation with the medical device industry, which has identified a number of barriers encountered by companies when attempting to capture user requirements. These will be addressed by a number of case study projects, performed in collaboration with our industrial partners, that will examine the application and utility of different approaches to collecting and analysing data on user requirements. MATCH is focused on providing advice to device developers on how to select and apply methods that have maximum theoretical strength, practical application, cost-effectiveness and likelihood of wide sector acceptance. Feedback will be sought in order to ensure that the needs of the diverse medical device sector are met.

Risk management in research and development (R&D) projects: the case of South Australia

A definition of the effective methods of risk management in R&D projects has remained elusive. Similarly, there have been calls to devise effective risk management methods in R&D projects. To develop this area further, the purpose of this study is twofold. First, it validates the veracity of claims about the urgency of introducing effective methods of risk management to R&D projects in South Australia based on nine unstructured interviews with experts. Second, the study presents the outcomes of two case studies that deployed the extended version of the failure mode and effect analysis, namely, the RFMEA method in a South Australian organisation, to investigate how the method can facilitate the identification of effective contingency plans to mitigate high-priority risks. The findings showed that the RFMEA method would be effective for project managers in dealing with risk management issues in R&D projects. The discussions presented will provide guidelines for practitioners in the industry.